Search NASA⌕ Search

SEARCH · Search NASA

Results for “PARABOLIC FLIGHT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Experimental and computational study of the effect of shocks on film cooling effectiveness in scramjet combustors

This paper presents results from a study conducted to investigate the effect of incident oblique shocks on the effectiveness of a coolant film at Mach numbers, typical of those expected in a scramjet combustor at Mach 15 to 20 flight. Computations with a parabolic code are in good agreement with the measured pressures and heat fluxes, after accounting for the influence of the shock upstream of its point of impingement on the plate, and the expansion from the trailing edge of the shock generator. The test data shows that, for the blowing rates tested, the film is rendered largely ineffective by the shock. Computations show that coolant blowing rates five to ten times those tested are required to protect against shock-induced heating. The implications of the results to scramjet combustor design are discussed.

Kamath, Pradeep S.↗
NASA NTRS1981

Design definition of a microwave power reception and conversion system for use on a high altitude powered platform

The design definition of a microwave power reception and conversion system for use on high altitude powered platform is presented. The study includes an initial design, construction and test effort on a thin film, printed circuit rectenna. A study of a low altitude demonstration of an airborne rectenna was made starting with the assumption that a fifty foot mechanically steerable parabolic reflector at the Wallops Flight Center would be retrofitted with a low microwave power source consisting of a five kilowatt commercially available magnetron and that a small blimp would be used to support the rectenna.

W. C. Brown↗
NASA NTRS1983

Role of a space station in materials processing

Previous work in materials processing (MP) in space is reviewed, and the role of a space station for future MP programs is examined. Historical MP experiments have been carried out in drop tubes, on aircraft in parabolic trajectories, on SPAR rocket flights, and on the Skylab and Soyuz-Apollo missions. The trials demonstrated gravity-driven convection is eliminated in molten materials, giving rise to expectations that crystals, alloys, and chemical or biological materials can be handled without convective disturbances that gravity causes. Particles of a significantly higher density can remain in suspension in an alloy in the molten state until resolidification. Containerless processing can be implemented at very high temperatures using acoustic, electrostatic, and EM levitation techniques. Convective influences on earth can be identified by their absence in space. The construction of a space station will permit longer-term and larger mass and volume experiments, as well as a closer step to actual commercial enterprises in space.

Yost, C.F.↗
NASA NTRS1971

Rocket study of the X-ray background

The X-ray optical detection system flown on Aerobee 17.08 is described in detail, and the preliminary results of the 24 June 1971 flight are discussed. The optical design, fabrication and parabolic nature of the mirrors, effective aperture of mirror array, and X-ray detectors are considered. Preliminary analysis of data from the flight confirms the extended nature and complex structure of the X-ray source in Virgo. A core of X-ray emission is indicated which is approximately 0.5 deg in diameter and surrounded by an emitting region at least 2 deg across. The Virgo source spectrum is observed to have few low energy photons.

Fisher, P. C.↗
NASA NTRS1962

Design comparison of lunar return configurations

Parabolic manned re-entry design comparisons are made between two classes of slender and blunt configurations capable of conventional horizontal and vertical earth landings. Aerodynamic modulation using flaps and control augmentation requirements are discussed in terms of their effect upon re-entry trajectories and landing footprints. Within the environment defined by the re-entry trajectories, the convective and radiative modes of heat transfer are compared, their differences discussed, and the problems associated with the configurations for planetary return missions indicated. Thermal protection systems are discussed and the factors influencing the selection of a given system for the re-entry environment are indicated. Comparison between reflective and absorptive systems are made and the merits of each for a given flight time indicated. A thermo-structural analysis is presented which shows the trade-oft between structural operating temperature and heat protection system thickness requirements. Total heat shield and structural weights are compared for the landing footprints presented and their variation with range shown. Finally, the areas of uncertainty in the aero-thermo structural design analysis are indicated for each class of configuration studied, and the weight differences between conventional horizontal landing and vertical descent configurations are given.

Parabolic flight↗
NASA NTRS2010

An Up-Close Look at Ares I-X

On October 28, 2009, one day later than the originally planned launch date, the Ares I-X suborbital test flight roared into the Florida sky. Flying its preplanned parabolic arc over the Atlantic, the development test vehicle for the Ares I crew launch vehicle performed as advertised, executing a perfect liftoff, 90-degree roll maneuver, ascent, and separation before its upper and lower stages descended into the ocean 150 miles downrange. This test flight, while carrying no astronauts, marked a major milestone for NASA, which had not flown a test launch of a human-rated rocket since the first flight of the Space Shuttle in 1981. During the flight, over 700 sensors collected over 900 measurements, which NASA will apply to validating the engineering models they used to design the vehicle in the first place. That data, telemetered to the ground and stored in a flight recorder onboard, was the primary "payload" of the mission.

Leahy, Bart↗
NASA NTRSDate not supplied

First Generation Parabolic Deformable Mirror for the ExoSpec Project

The Exoplanet Spectroscopy (ExoSpec) project links four different tasks at Goddard Space Flight Center (GSFC) to facilitate efficient imaging and characterization of exoplanets. One of the tasks is the development of parabolic deformable mirrors to improve on the current state-of-the-art wavefront sensing and control implementations that are baselined to have two high-actuator count flat deformable mirrors (DMs). The current baseline has two DMs at a considerable separation distance to effectively control both amplitude and phase aberrations. This significant separation poses packaging challenges to the direct imaging missions. We can mitigate this issue by making the off-axis imaging elements in the optical train controllable. Besides addressing the packaging challenges, this technique reduces the risk of having the entire coronagraph instrument’s performance depend on two high-actuator count DMs. Simulations show that making imaging elements deformable increases the overall controllable bandwidth - it would be possible to control wavefront aberrations up to 35% bandwidth over a 5 - 12 λ/D. GSFC has worked with a commercial vendor to produce a first-generation parabolic DM and built a testbed in an environmentally controlled cleanroom to experimentally demonstrate the use of a parabolic DM in a coronagraph instrument. This versatile testbed is designed to test different DM architectures and various low-order wavefront schemes. This provides us with a basis for comparison with different DM configurations —1) flat DM, 2) parabolic DMs, and 3) flat DM and parabolic DMs. In this paper, we will provide an update on our parabolic DM work.

Deformable Mirror↗
NASA NTRS1976

ATS-6 spacecraft: In-flight antenna pattern measurement

Antenna patterns, principally associated with the 9.1 meter parabolic antenna of the ATS-6 spacecraft, were measured while in orbit at quasi-stationary synchronous altitude. Controlling the spacecraft attitude permitted a scanning of the spacecraft antenna pattern over the Rosman ground station, thus achieving the measurement of the antenna pattern contour. Patterns were determined in terms of relative gain referenced in position to the spacecraft body coordinates by means of signal power measurements made using a linear detector. These data were subsequently correlated with the attitude data to define the antenna patterns. Antenna patterns measured are presented and compared with available preflight patterns.

Nicholson, L. W.↗
NASA NTRS1955

Comparison of the Drag of a Fin-Stabilized Body of Revolution and of a Complete Airplane Configuration as Obtained at Transonic Speeds in a Slotted Wind Tunnel and in Free Flight

A comparison of the zero-lift drag coefficients at Mach numbers from 0.81 to 1.41 of a fin-stabilized parabolic body of revolution as measured in the Langley transonic blowdown tunnel has been made with measurements obtained in free-flight on a larger but geometrically similar model. The absolute values of drag coefficient obtained in the slotted wind tunnel were equivalent to the free-flight drag-coefficient values up to a Mach number of 1.4 when adjustments were made for the effect on viscous drag of differences in Reynolds number between the two test conditions. Excellent agreement was obtained between the two tests for the pressure-drag variation with Mach number, regardless of whether the scale effect on skin friction was considered. Favorable agreement was also obtained between the pressure-drag increments due t o the presence of the stabilizing fins as determined in the wine tunnel from fins-on and fins-off tests and as obtained by a different method in free flight. Tests of a specific airplane configuration to obtain an indication of the problems involved in the construction and tests of small-scale (approximately 7-inch span) complete airplane configuration with internal air flow indicated that reliable zero-lift drag-coefficient measurements at Mach numbers up to 1.4 can be attained with such models, provided the model is constructed with a high but not an unreasonable degree of accuracy.

Howell, Robert R.↗
NASA NTRS2020

Integration, Test, and On-Orbit Operation of a Ka-band Parabolic Deployable Antenna (KaPDA) for CubeSats

In the past decade, CubeSats have undergone a revolution, moving from universityresearch projects to enabling industry opportunities and government missions. Six yearsago, the Jet Propulsion Laboratory, California Institute of Technology (JPL/Caltech)initiated a research and technology development effort to advance CubeSat communicationcapabilities, with one of the key thrusts being the Ka-band parabolic deployable antenna(KaPDA). This antenna started with the ambitious goal of fitting a 42 dB, 0.5 meter, 35 GHzantenna in a 1.5U canister. At that time, there had been very limited development in the areaof high gain CubeSat antennas which are critical for both high data rate communicationsand remote sensing science. A Ka-band high gain antenna would provide a 10,000 timesincrease in data communication rates over an X-band patch antenna and a 100 timesincrease over state-of-the-art S-band parabolic antennas. This paper discusses the process ofbuilding, integrating, and operating the flight antenna, its final performance and lessonslearned. KaPDA was an enabling technology for RainCube mission, the first Earth ScienceCubeSat to have an active instrument. RainCube was launched in May of 2018, makingKaPDA the second deployable parabolic antenna to fly on a CubeSat and the first of its kindto operate at Ka-band enabling a number of opportunities for high rate, deep space antennacommunications and remote sensing science.

Thomson, Mark W.↗