Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHOSPHORIC ACID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Effect of ultrasound treatment on the morpho-structural and luminescent characteristics of cerium doped yttrium silicate phosphors

Highlights: • Y{sub 2}SiO{sub 5}:Ce is prepared by gel combustion in ultrasound conditions (US). • Morpho-structural characteristics are revealed based on FTIR, SEM, XRD, BET. • Incorporation of Ce{sup 3+} in X1/X2 type centers depends on preparative conditions. • US treatment increases the luminescent performances up to 151%. - Abstract: Cerium activated yttrium silicate (Y{sub 2}SiO{sub 5}:Ce) phosphors were prepared by gel-combustion, using yttrium–cerium nitrate as oxidizer, aspartic acid as fuel and TEOS as source of silicon. Two modalities for samples preparation were approached namely: the classical gel-combustion and sonication gel-combustion. The ultrasound treatment during the gelling stage has a positive effect on the structural and luminescent characteristics of the final product. Therefore, a well crystallized single X2–Y{sub 2}SiO{sub 5} phase phosphor was obtained at 1200 °C. Based on FT-IR and XRD investigations, conversion of X1 to X2–Y{sub 2}SiO{sub 5} phases is observed as the firing temperature is varied (1100 °C, 1200 °C, 1300 °C 1400 °C). The ultrasound treatment leads to smaller particle size and enhances the luminescent performances up to 151% in comparison with samples prepared by classical way.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Surface Functionalized Nanostructured Ceramic Sorbents for the Effective Collection and Recovery of Uranium from Seawater

The ability to collect uranium from seawater offers the potential for a nearly limitless fuel supply for nuclear energy. We evaluated the use of functionalized nanostructured sorbents for the collection and recovery of uranium from seawater. Extraction of trace minerals from seawater and brines is challenging due to the high ionic strength of seawater, low mineral concentrations, and fouling of surfaces over time. We demonstrate that rationally assembled sorbent materials that integrate high affinity surface chemistry and high surface area nanostructures into an application relevant micro/macro structure enables collection performance that far exceeds typical sorbent materials. High surface area nanostructured silica with surface chemistries composed of phosphonic acid, phosphonates, 3,4 hydroxypyridinone, and EDTA showed superior performance for uranium collection. A few phosphorous-based commercial resins, specifically Diphonix and Ln Resin, also performed well. We demonstrate an effective and environmentally benign method of stripping the uranium from the high affinity sorbents using inexpensive nontoxic carbonate solutions. The cyclic use of preferred sorbents and acidic reconditioning of materials was shown to improve performance. Composite thin films composed of the nanostructured sorbents and a porous polymer binder are shown to have excellent kinetics and good capacity while providing an effective processing configuration for trace mineral recovery from solutions. Initial work using the composite thin films shows significant improvements in processing capacity over the previously reported sorbent materials.

green mining↗
DOE OSTI2016

MICROBIALLY MEDIATED LEACHING OF RARE EARTH ELEMENTS FROM RECYCLABLE MATERIALS

Bioleaching offers a potential approach for recovery of rare earth elements (REE) from recyclable materials, such as fluorescent lamp phosphors or degraded industrial catalysts. Microorganisms were enriched from REE-containing ores and recyclable materials with the goal of identifying strains capable of extracting REE from solid materials. Over 100 heterotrophic microorganisms were isolated and screened for their ability to produce organic acids capable of leaching REE. The ten most promising isolates were most closely related to Pseudomonas, Acinetobacter and Talaromyces. Of the acids produced, gluconic acid appeared to be the most effective at leaching REE (yttrium, lanthanum, cerium, europium, and terbium) from retorted phosphor powders (RPP), fluidized cracking catalyst (FCC), and europium-doped yttrium oxide (YOEu). We found that an Acinetobacter isolates, BH1, was the most capable strain and able to leach 33% of the total REE content from the FCC material. These results support the continuing evaluation of gluconic acid-producing microbes for large-scale REE recovery from recyclable materials.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

Mechanistic insights into hydrodeoxygenation of phenol on bimetallic phosphide catalysts

Catalytic hydrodeoxygenation (HDO) of phenolics is a necessary step for upgrading bio-oils to transportation fuels. Bimetallic catalysts offer the potential of increased activities and selectivities for desired products. Adding non-metallic elements, such as phosphorous, allows for charge distribution between the metal and nonmetal atoms, which improves Lewis acid character of catalytic surfaces. This work utilizes experimental and density functional theory (DFT) based calculations to identify potential C–O bond cleavage pathways and product selectivities for HDO reactions on FeMoP, RuMoP, and NiMoP catalysts. Our work demonstrates that FeMoP catalyst favors direct deoxygenation pathway due to a lower activation energy barrier for C–O bond cleavage whereas RuMoP and NiMoP catalysts promote ring hydrogenation first, followed by the cleavage of C–O bond. The Bader charge analysis indicates that for these catalytic systems Moδ+ site bears a large positive charge which acts as a Lewis acid site for HDO reactions. Altogether, we find that trends in the experimental product selectivities are in good agreement with that predicted with DFT calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Microbial interactions with phosphorus containing glasses representative of vitrified radioactive waste

The presence of phosphorous in borosilicate glass (at 0.1 – 1.3 mol % P 2 O 5 ) and in iron-phosphate glass (at 53 mol % P 2 O 5 ) stimulated the growth and metabolic activity of anaerobic bacteria in model systems. Dissolution of these phosphorous containing glasses was either inhibited or accelerated by microbial metabolic activity, depending on the solution chemistry and the glass composition. The breakdown of organic carbon to volatile fatty acids increased glass dissolution. The interaction of microbially reduced Fe(II) with phosphorus-containing glass under anoxic conditions decreased dissolution rates, whereas the interaction of Fe(III) with phosphorous-containing glass under oxic conditions increased glass dissolution. Phosphorous addition to borosilicate glasses did not significantly affect the microbial species present, however, the diversity of the microbial community was enhanced on the surface of the iron phosphate glass. Results demonstrate the potential for microbes to influence the geochemistry of radioactive waste disposal environments with implication for wasteform durability.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1998

Rubidium-Strontium Formation Age of Allan Hills 84001 Carbonates

Our preferred age for the formation of carbonates in the martian meteorite ALH 84001 is 3.90 plus or minus 0.04 Ga for Lambda (Rubidium 87) equals 0.01402 Ga (exp -1), or 3.85 plus or minus 0.04 Ga for Lambda (Rubidium 87) = 0.0142 Ga(exponent -1). This age is determined by a three-point Rb-Sr isochron defined by leachates of high-graded carbonate-rich material. Major cation and especially phosphorous analyses of the leachates permit contributions from igneous whitlockite to be recognized for low-acidity leachates, and the corresponding data are omitted from the isochron. Data for the two highest acidity leachates plot close to the preferred isochron, but are omitted because we believe they contain contributions leached from the pyroxene substrate on which most of the carbonates are found. Nevertheless, the isochron age for all five highest-acidity leachates is 3.94 plus or minus 0.04 Ga, and is within error of the age obtained for the more restricted data set. All leachates used to define the isochron have major cation compositions that are singular to those obtained by microprobe analyses of the carbonate rosettes and are consistent with progressive digestion of the carbonates according to their composition. The age thus obtained for the carbonates is about 600 m.y. younger than the crystalization age of ALH 84001 determined by Sm-Nd analyses but is within error limits of the age of impact metamorphism inferred from the Rb-Sr and Ar-Ar systematics of silicates. which yield ages of 3.85 plus or minus 0.05 Ga and 4.05- 3.80 Ga to 4.3-3.8 Ga, respectively. Similarities between the carbonate crystallization age and the age of impact metamorphism as determined by Ar-Ar and Rb-Sr suggest that the carbonate formation is impact-related. Nevertheless, both high and low- temperature scenarios for the origin of the carbonates are possible.

Borg, L. E.↗
DOE OSTI2026

Probing Terra Incognita of Ni–P Catalysts: Operando Explorations during Hydrogen Evolution Reaction

We have developed two Ni phosphide preparation methods allowing operando XAS surface-sensitive studies of well-defined bulk systems. For Ni K-edge XAS, a Ni 2 P phase-pure powder was sintered into a high-density pellet and polished for grazing incidence XAS. Ni sites were mildly affected by the acidic electrolyte prior to the HER, while the applied cathodic potential caused the reduction of Ni surface states beyond the states of as-prepared Ni 2 P. The computed fully H-covered Ni 2 P [0001] model describes the difference in the operando Ni K-edge GIXAS spectrum well. Upon turning the applied bias off, the Ni sites became immediately oxidized, forming NiO on the surface. Thus, the active phase during the HER is covalent Ni 0 close to that in the intermetallic phosphides, and Ni 2+ oxides formed after, and not during, the HER. For P K-edge XAS, Ni foam was phosphorized to form a thin Ni 3 P layer while preserving its high surface area. Upon immersion in the acidic electrolyte, the P sites underwent removal of P 5+ phosphates and formed new P coordination, possibly due to the adsorption of protons from the electrolyte. These new P surface states were not affected by turning the cathodic current on and off as soon as the sample was immersed in the acidic electrolyte. However, the removal of the sample from the electrochemical cell and drying in air resulted in substantial depletion and oxidation of surface P. Echoing the observed Ni site chemistry during HER, XAS and XPS suggest that the in situ active P sites are different from the oxidized P states observed under ex situ conditions.

Kong, Seongyoung [Iowa State Univ., Ames, IA (Unit↗
DOE OSTI2024

Fluorescence-Based Aqueous Phosphate Sensing Using Eu(cpboda)(DMF) 2

Fluorescence-based phosphate sensing using phosphate-sensitive phosphors is a promising approach for in situ monitoring of phosphate pollution in waterways and reservoirs. To date, the most sensitive phosphor developed for this purpose is Tb(cpboda)(DMF) 2 , where cpboda = (3,3'-((5-Carboxy-1,3-phenylene)bis(oxy))dibenzoic acid). In this study, we further improve this sensitivity by replacing the Tb 3+ ions with Eu 3+ ions to make Eu(cpboda)(DMF) 2 and find concentration-independent phosphate-sensitivity of 1570 ± 120, which is ≈8× more sensitive than the Tb-version. This improvement is attributed to Eu 3+ having a hypersensitive transition, while Tb 3+ does not. Additionally, we characterize the phosphor’s optical properties, photodegradation, and water solubility. We find that the phosphor presents challenges with regards to both photodegradation and solubility, as it is found to be poorly soluble in water and is quickly photodegraded under UV radiation <360 nm. However, these obstacles can, in theory, be overcome with the use of direct excitation of the Eu 3+ ions at 394 nm and careful design of an analysis instrument to reduce concentration variations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

From natural attapulgite to phosphor materials: Characterization, photoluminescence and structure

Highlights: • Sr{sub 2.965}Al{sub 0.08}Si{sub 0.92}O{sub 5}:0.025Ce{sup 3+}, 0.01Eu{sup 2+} phosphor was synthesized from natural attapulgite. • Pure Sr{sub 3}SiO{sub 5} phase can be easily obtained. • It provides a new application field as phosphor for natural attapulgite. - Abstract: Sr{sub 2.965}Al{sub 0.08}Si{sub 0.92}O{sub 5}:0.025Ce{sup 3+}, 0.01Eu{sup 2+} (SrAlSiO:Ce{sup 3+}, Eu{sup 2+}) phosphor from natural attapulgite (ATP) was synthesized by solid-state reaction method. For the use of ATP as a source of Si and Al, pretreatment process including mechanical grinding and acid leaching were involved. X-ray diffraction patterns confirmed the formation of silicates in a wide temperature field, whereas Sr{sub 3}SiO{sub 5} within a single step. The ATP fibers were tuning into phosphor particles (about 1.5–3.0 μm) after calcination. Furthermore, photoluminescence spectra of the SrAlSiO:Ce{sup 3+}, Eu{sup 2+} phosphor was also in good agreement with the literature results, indicating a promising potential application as an effective candidate for warm-white LEDs materials.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Color stable manganese-doped phosphors

A lighting apparatus capable of emitting white light includes a semiconductor light source; and a phosphor material radiationally coupled to the light source. The phosphor material includes a color-stable Mn.sup.+4 doped phosphor prepared by a process including providing a phosphor of formula I; A.sub.x[MF.sub.y]:Mn.sup.+4 I and contacting the phosphor in particulate form with a saturated solution of a composition of formula II in aqueous hydrofluoric acid; A.sub.x[MF.sub.y]; II wherein A is Li, Na, K, Rb, Cs, NR.sub.4 or a combination thereof; M is Si, Ge, Sn, Ti, Zr, Al, Ga, In, Sc, Y, La, Nb, Ta, Bi, Gd, or a combination thereof; R is H, lower alkyl, or a combination thereof; x is the absolute value of the charge of the [MF.sub.y] ion; and y is 5, 6 or 7. In particular embodiments, M is Si, Ge, Sn, Ti, Zr, or a combination thereof.

36 MATERIALS SCIENCE↗
DOE OSTI2026

3D printed water-stable Cd-doped Cs 4 MnBi 2 Cl 12 /polylactic acid perovskite/polymer composites for high-flux X-ray scintillation

Stable and efficient X-ray scintillators are crucial for medical diagnostics, industrial, and defense applications. However, conventional scintillator technologies face a trade-off between stability, optimal performance, and sustainability. Herein, we introduce 3D-printed Cs 4 MnBi 2 Cl 12 (Pero1) and Cs 4 Cd 0.68 Mn 0.32 Bi 2 Cl 12 (Pero2) perovskite microcrystals embedded within a polylactic acid (PLA) polymer composite as X-ray scintillators, combining efficiency, stability, and sustainability. The orange luminescent perovskite powder phosphors exhibited poor water stability, which was successfully addressed through incorporation into PLA via filament extrusion and fused deposition modeling (FDM) 3D printing. The resulting composite films demonstrated remarkable water stability while maintaining uniform orange emission throughout the polymer matrix, as confirmed by 3D topography scanning and X-ray fluorescence mapping. Structural characterization revealed minimal chemical interaction between the perovskite and PLA matrix, with the composites retaining their crystalline properties. The PLA-Pero2 composite exhibited superior optical properties, with a photoluminescence quantum yield of 47%, nearly 17 times higher than that of PLA-Pero1 (2.8%), attributed to the effective suppression of non-radiative decay pathways through Cd 2+ doping. Under hard X-ray irradiation at synchrotron beamlines, both composites exhibited excellent radioluminescence, with emission peaks at 605 nm, a linear response across a wide X-ray flux range, and remarkable radiation stability, showing less than 3% intensity degradation after 600 seconds of continuous high-dose exposure. The PLA-Pero2 composite achieved a spatial resolution of 5 line pairs per millimeter and a contrast ratio of 0.255. These performance metrics, combined with the polymer's biodegradability and scalability through additive manufacturing, position PLA-based composites as a more sustainable alternative to conventional petroleum-based polymer scintillators for next-generation medical imaging, radiation monitoring, and industrial radiography applications.

3D Printing↗
DOE OSTI2018

The GdF3 phosphors with enhanced multicolor luminescence via multi-channel excitation and energy migration procedure

Highlights: • Core-shell structured GdF{sub 3} phosphors were synthesized by hydrothermal method. • SiO{sub 2} coating layers prevent aggregation and sintering during thermal annealing. • The annealed CSS nanophosphors were highly dispersible. • The inserted PMA significantly enhances multicolor luminescence. • The annealed CSS phosphors exhibit enhanced multicolor luminescence properties. - Abstract: A collection of GdF{sub 3} core-shell structured (CSS) phosphors were synthesized by hydrothermal method. The as-prepared (AP) phosphors were coated with SiO{sub 2} layers to avoid aggregation and sintering during thermal annealing at 800 °C, after which the SiO{sub 2} layers were etched off and the annealed phosphors became highly dispersible. The annealed CSS phosphor aGdF{sub 3}:Eu{sup 3+}@GdF{sub 3}:Ce{sup 3+},Dy{sup 3+} shows excellent multicolor luminescence performance with the aid of dual-channel excitation and energy migration (EM) procedure of Gd{sup 3+} ions. By inserting pyromellitic acid (PMA) organic ligands into the interfaces between annealed core and AP shell layer regions, the so-called antenna effect of organic ligands of PMA forms a new excitation channel, which makes the CSS phosphor aGdF{sub 3}:Eu{sup 3+}@PMA@GdF{sub 3}:Ce{sup 3+},Dy{sup 3+} exhibit significantly enhanced multicolor luminescence via multi-channel excitation and EM process. The prepared CSS phosphors in this work are excellent candidates for applications in solid-state lighting.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Molecular ion sources for low energy semiconductor ion implantation (invited)

Smaller semiconductors require shallow, low energy ion implantation, resulting space charge effects, which reduced beam currents and production rates. To increase production rates, molecular ions are used. Boron and phosphorous (or arsenic) implantation is needed for P-type and N-type semiconductors, respectively. Carborane, which is the most stable molecular boron ion leaves unacceptable carbon residue on extraction grids. A self-cleaning carborane acid compound (C{sub 4}H{sub 12}B{sub 10}O{sub 4}) was synthesized and utilized in the ITEP Bernas ion source resulting in large carborane ion output, without carbon residue. Pure gaseous processes are desired to enable rapid switch among ion species. Molecular phosphorous was generated by introducing phosphine in dissociators via 4PH{sub 3} = P{sub 4} + 6H{sub 2}; generated molecular phosphorous in a pure gaseous process was then injected into the HCEI Calutron-Bernas ion source, from which P{sub 4}{sup +} ion beams were extracted. Results from devices and some additional concepts are described.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2018

Construction of Eu2+ doped H3Sr6(PO4)5·2H2O with novel cruciate multilayer microarchitectures: facile hydrothermal synthesis, growth mechanism, and luminescence properties

Highlights: • H{sub 3}Sr{sub 6}(PO{sub 4}){sub 5}·2H{sub 2}O:Eu{sup 2+} phosphors were synthesized via a simple hydrothermal method. • H{sub 3}Sr{sub 6}(PO{sub 4}){sub 5}·2H{sub 2}O:Eu{sup 2+} showed novel cruciate multilayer microarchitectures. • Phase and morphology were depended on the optimization of the reaction conditions. • H{sub 3}Sr{sub 6}(PO{sub 4}){sub 5}·2H{sub 2}O:Eu{sup 2+} exhibited intense characteristic blue emission of Eu{sup 2+}. - Abstract: A series of monodisperse cruciate multilayer H{sub 3}Sr{sub 6}(PO{sub 4}){sub 5}·2H{sub 2}O:Eu{sup 2+} microarchitectures assembled by crossed nanorods have been successfully synthesized via a facile surfactant-assisted hydrothermal route. XRD and FT-IR confirmed the existence of crystalline water in the phosphor. The FE-SEM images revealed that the phase and morphology of resulting samples were strongly depended on the optimization of the reaction conditions, especially the pH value and the molar ratio of citric acid (CA)/Cations. Furthermore, the possible growth mechanism of H{sub 3}Sr{sub 6}(PO{sub 4}){sub 5}·2H{sub 2}O:Eu{sup 2+} microarchitectures was proposed in detail. Under near-ultraviolet excitation of 365 nm, the as-obtained H{sub 3}Sr{sub 6}(PO{sub 4}){sub 5}·2H{sub 2}O:0.05Eu{sup 2+} sample exhibited intense wide characteristic blue emission of Eu{sup 2+}, which could be decomposed by Gaussian fitting into two peaks corresponding to different Eu{sup 2+} luminous centers. The present results demonstrated that the morphology-tunable H{sub 3}Sr{sub 6}(PO{sub 4}){sub 5}·2H{sub 2}O:Eu{sup 2+} microarchitecture could be used as a potential candidate for future optoelectronic device applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2019

Iron Single Atoms on Graphene as Nonprecious Metal Catalysts for High‐Temperature Polymer Electrolyte Membrane Fuel Cells

Abstract Iron single atom catalysts (Fe SACs) are the best‐known nonprecious metal (NPM) catalysts for the oxygen reduction reaction (ORR) of polymer electrolyte membrane fuel cells (PEMFCs), but their practical application has been constrained by the low Fe SACs loading (<2 wt%). Here, a one‐pot pyrolysis method is reported for the synthesis of iron single atoms on graphene (FeSA‐G) with a high Fe SAC loading of ≈7.7 ± 1.3 wt%. The as‐synthesized FeSA‐G shows an onset potential of 0.950 V and a half‐wave potential of 0.804 V in acid electrolyte for the ORR, similar to that of Pt/C catalysts but with a much higher stability and higher phosphate anion tolerance. High temperature SiO 2 nanoparticle‐doped phosphoric acid/polybenzimidazole (PA/PBI/SiO 2 ) composite membrane cells utilizing a FeSA‐G cathode with Fe SAC loading of 0.3 mg cm −2 delivers a peak power density of 325 mW cm −2 at 230 °C, better than 313 mW cm −2 obtained on the cell with a Pt/C cathode at a Pt loading of 1 mg cm −2 . The cell with FeSA‐G cathode exhibits superior stability at 230 °C, as compared to that with Pt/C cathode. Our results provide a new approach to developing practical NPM catalysts to replace Pt‐based catalysts for fuel cells.

25 ENERGY STORAGE↗
DOE OSTI2020

Ultrathin silicon oxide prepared by in-line plasma-assisted N 2 O oxidation (PANO) and the application for n-type polysilicon passivated contact

We develop a plasma-assisted nitrous-oxide (N 2 O) gas oxidation (PANO) method to prepare the ultrathin silicon oxide (SiO x ) for polysilicon (poly-Si) passivated contact. The effects of preparation conditions, including the substrate temperature, processing time, and plasma power, are studied. Afterwards, we integrate the PANO SiO x into the polysilicon passivated contact and optimize the passivation and contact performances. Excellent surface passivation with the n-type poly-Si and PANO SiO x on the n-type c-Si wafer is achieved by 880 °C annealing, which shows competitive passivation quality to the one with NASO SiO x . Champion implied open-circuit voltage (iV oc ) and single-sided recombination saturated current (J 0 ) reach 730 mV and 4.3 fA/cm 2 after crystallization; and they are further improved to 747 mV and 2.0 fA/cm 2 (3 × 10 15 cm -3 ) after subsequent AlO x /SiN x hydrogenation. Using transmission electron microscopy (TEM), we find that the thickness of PANO SiO x ranges 1.1–2.4 nm and the controlled nitric acid oxidized SiO x (NAOS) ranges 1.3–1.8 nm. The contact resistivity (ρ c ) is typically <10 mΩ cm 2 with the annealing temperature of >820 °C. Also, the crystallinity, phosphorous in-diffusion profile, and current-leaking density of the passivated contacts are investigated. In general, the PANO SiO x and in-situ doping amorphous silicon precursor can be fabricated in one PECVD system without additional equipment or transfer procedures, which is favorable for the high-efficiency, low-cost industrial manufacture.

14 SOLAR ENERGY↗
DOE OSTI2020

Reformulated Red mud: a robust catalyst for in situ catalytic pyrolysis of biomass

Biomass feedstocks contain inorganic compounds generally classified as ash. The ash consists of compounds of potassium, calcium, magnesium, silicon, phosphorous and other elements. These elements have been reported to influence both the pyrolysis reactions as well as destabilizing the pyrolysis oils during storage. The inorganic elements have also been reported to deposit on catalyst surfaces during in situ catalytic pyrolysis leading to the eventual deactivation of acidic catalysts such as zeolites. The deposition of inorganic elements and their effect on formulated red mud (FRM) catalyst during in situ catalytic pyrolysis of pinyon juniper wood was investigated. The inorganic elements were measured for the fresh, coked, and regenerated catalysts. The BET specific surface area of the FRM catalyst decreased from 76 m2/g for the fresh catalyst to 53 m2/g for the stable regenerated catalyst. After three regenerations, the BET specific surface area stabilized at 53 m2/g and remained constant after all other regenerations. Potassium, calcium, magnesium, and phosphorous were deposited on the catalyst. Potassium deposition was linear with the number of regenerations while magnesium and calcium depositions were initially rapid but leveled off after three regenerations of the catalyst. Phosphorous deposition was almost linear, but the data were more scattered compared to potassium. The potassium deposition was attributed to physical phenomenon whereas calcium and magnesium depositions were more akin to chemical reactions related to the loss of BET surface area of the catalyst. The deposition of these elements on the surface of the catalyst did not deactivate it. After each catalyst regeneration, the oil yield was not significantly affected and the oil oxygen content and viscosity decreased slightly. This clearly showed that formulated red mud is a robust catalyst suitable for in situ catalytic fast pyrolysis of biomass.

Agblevor, Foster↗
DOE OSTI2017

Conjugated linoleic acid prevents age-induced bone loss in mice by regulating both osteoblastogenesis and adipogenesis

Osteoporosis (OP) can increase the risk of bone fracture and other complications, which is a major clinical problem. Previous researches have revealed that conjugated linoleic acid (CLA) can promote the bone formation. But the mechanisms are not clear. Thus, we tested the hypothesis that CLA acts on bone formation might be via mTOR Complex1 (mTORC 1) pathway by in vitro and vivo assays. We studied the effect of CLA mix on MC3T3-E1 pre-osteoblasts differentiation into osteoblasts, and bone formation under osteoporotic conditions. At the same time, 3T3-L1 pre-adipocyte with the same CLA mix concentration gradient for 8 days with adipogenic differentiation medium. We found that Alkaline phosphatase (ALP), runt-related transcription factor 2 (RUNX2) and osteocalcin (OCN) expressions of pre-osteoblasts were up-regulated. Moreover in presence of CLA, peroxisome proliferators-activated receptor γ(PPARγ) and CCAAT/enhancer-binding protein (C/EBPα) were down-regulated. Osteoporosis mice bone parameters in the distal femoral meraphysis were significantly increased compared with placebo mice. Furthermore, the phosphor-S6 (P-S6) was suppressed and phosphor-AKT (P-AKT) was up-regulated. Consistently, CLA can stimulate differentiation of osteoblasts and inhibited pre-adipocytes differentiated into adipocytes via AKT/mTORC1 signal pathway. Overall CLA thus be a suitable candidate for the treatment of patients with postmenopausal osteoporosis and obesity. - Highlights: • CLA stimulates differentiation of osteoblasts through ALP, RUNX2 and OCN up-regulation. • CLA inhibites pre-adipocytes differentiated into adipocytes through pPPARγ and C/EBPα down-regulation. • CLA stimulates differentiation of osteoblasts and inhibited pre-adipocytes differentiated into adipocytes via AKT/mTORC1 signal pathway. • CLA promotes bone formation which might be via mTOR Complex1 (mTORC1) pathway in vitro and in vivo.

60 APPLIED LIFE SCIENCES↗