Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA PRESSURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Temporal and spatial profiles of emission intensities in atmospheric pressure helium plasma jet driven by microsecond pulse: Experiment and simulation

A needle-circular electrode structure helium plasma jet driven by microsecond pulsed power is studied. Spatially resolved emission results show that the emission intensity of He(3{sup 3}S{sub 1}) line decreases monotonically along the axial direction, while those of N{sub 2}(C{sup 3}Π{sub u}), N{sub 2}{sup +}(B{sup 2}∑{sup +}{sub u}), and O(3p{sup 5}P) reach their maxima at 3 cm, 2.6 cm, and 1.4 cm, respectively. The plasma plume of the four species shows different characteristics: The N{sub 2} emission plume travels at a fast speed along the entire plasma jet; the N{sub 2}{sup +} emission plume is composed of a bright head and relatively weak tail and travels a shorter distance than the N{sub 2} emission plume; the He emission plume travels at a slower speed for only a very short distance; propagation of the O emission plume is not observed. Results of calculation of radiation fluxes emitted by positive streamers propagating along helium plasma jets are presented. It is shown, in agreement with the results of the present experiment and with other available experimental data, that the intensities of radiation of N{sub 2}(C{sup 3}Π{sub u}) molecules and He(3{sup 3}S{sub 1}) atoms vary with time (along the plasma jet) quite differently. The factors resulting in this difference are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Analysis of plasma instabilities and verification of the BOUT code for the Large Plasma Device

The properties of linear instabilities in the Large Plasma Device [W. Gekelman et al., Rev. Sci. Instrum. 62, 2875 (1991)] are studied both through analytic calculations and solving numerically a system of linearized collisional plasma fluid equations using the three-dimensional fluid code BOUT[M. Umansky et al., Contrib. Plasma Phys. 180, 887 (2009)], which has been successfully modified to treat cylindrical geometry. Instability drive from plasma pressure gradients and flows is considered, focusing on resistive drift waves and the Kelvin-Helmholtz and rotational interchange instabilities. A general linear dispersion relation for partially ionized collisional plasmas including these modes is derived and analyzed. For Large Plasma Device relevant profiles including strongly driven flows, it is found that all three modes can have comparable growth rates and frequencies. Detailed comparison with solutions of the analytic dispersion relation demonstrates that BOUT accurately reproduces all characteristics of linear modes in this system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Improved operation of a microwave pulse compressor with a laser-triggered high-pressure gas plasma switch

The influence of laser beam parameters on the output pulses of a resonant microwave compressor with a laser-triggered plasma switch was investigated. The S-band compressor, consisting of a rectangular waveguide-based cavity and H-plane waveguide tee with a shorted side arm, was filled with pressurized dry air and pumped by 1.8-μs-long microwave pulses of up to 450 kW power. A Nd:YAG laser was used to ignite the gas discharge in the tee side arm for output pulse extraction. The laser beam (at 213 nm or 532 nm) was directed along the RF electric field lines. It was found that the compressor operated most effectively when the laser beam was focused at the center of the switch waveguide cross-section. In this case, the power extraction efficiency reached ∼47% at an output power of ∼14 MW, while when the laser beam was not focused the maximal extraction efficiency was only ∼20% at ∼6 MW output power. Focusing the laser beam resulted also in a dramatic decrease (down to <1 ns) in the delay of the output pulses' appearance with respect to the time of the beam's entrance into the switch, and the jitter of the output pulses' appearance was minimized. In addition, the quality of the output pulses' waveform was significantly improved.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Particle-in-cell simulation study of a lower-hybrid shock

The expansion of a magnetized high-pressure plasma into a low-pressure ambient medium is examined with particle-in-cell simulations. The magnetic field points perpendicular to the plasma's expansion direction and binary collisions between particles are absent. The expanding plasma steepens into a quasi-electrostatic shock that is sustained by the lower-hybrid (LH) wave. The ambipolar electric field points in the expansion direction and it induces together with the background magnetic field a fast E cross B drift of electrons. The drifting electrons modify the background magnetic field, resulting in its pile-up by the LH shock. The magnetic pressure gradient force accelerates the ambient ions ahead of the LH shock, reducing the relative velocity between the ambient plasma and the LH shock to about the phase speed of the shocked LH wave, transforming the LH shock into a nonlinear LH wave. The oscillations of the electrostatic potential have a larger amplitude and wavelength in the magnetized plasma than in an unmagnetized one with otherwise identical conditions. The energy loss to the drifting electrons leads to a noticeable slowdown of the LH shock compared to that in an unmagnetized plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Particle-in-cell simulations of collisionless magnetic reconnection with a non-uniform guide field

Results are presented of a first study of collisionless magnetic reconnection starting from a recently found exact nonlinear force-free Vlasov–Maxwell equilibrium. The initial state has a Harris sheet magnetic field profile in one direction and a non-uniform guide field in a second direction, resulting in a spatially constant magnetic field strength as well as a constant initial plasma density and plasma pressure. It is found that the reconnection process initially resembles guide field reconnection, but that a gradual transition to anti-parallel reconnection happens as the system evolves. The time evolution of a number of plasma parameters is investigated, and the results are compared with simulations starting from a Harris sheet equilibrium and a Harris sheet plus constant guide field equilibrium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Steady state self-induced current in tokamak

A model, which may make it possible to self-consistently calculate the self-driven current in tokamaks taking into account asymmetry and bootstrap currents, is presented. It is shown that the described self-driven current can provide steady-state tokamak operation without the seed current produced with the help of additional methods. The total self-consistent, self-driven current does not depend on magnetic field magnitude and is proportional to the square root from plasma pressure. The experimental data obtained in the National Spherical Torus Experiment are satisfactorily described by this model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma Surface Functionalization of AFP Manufactured Composites for Improved Adhesive Bond Performance

Application of carbon fiber reinforced polymer (CFRP) as a high-performance structural material has widespread application in the present aerospace industry. However, as-processed composite materials require a comprehensive surface treatment prior to bonding to remove contaminants and impart surface functionality and topography to overcome their poor adhesion properties. Atmospheric pressure plasma jet treatment (APPJT) has been increasingly garnering attention as an alternate method for surface preparation of CFRP. This method has been reported to achieve success in imparting favorable polar functional groups into the composite surfaces enhancing wettability and surface energy of the bonded surfaces. In some cases, APPJT has been demonstrated to remove contaminants or, in the case of silicones, convert them to silica. In this study, an atmospheric pressure plasma jet (APPJ) system was used for surface activation of a composite laid-up by an automated fiber placement (AFP) machine. Surface modifications prior to and after treatment were characterized using water contact angle (WCA) measurements, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and atomic force microscopy (AFM). Double cantilever beam (DCB) tests were performed to quantify the bonding performance of the composites. The results show a marked enhancement of the mode I interlaminar fracture toughness with the application of APPJT.

Sarikaya, Ibrahim↗

Interplanetary magnetic holes: Theory

Magnetic holes in the interplanetary medium are explained as stationary, non-propagating, equilibrium structures in which there are field-aligned enhancements of the plasma density and/or temperature. Magnetic anti-holes are considered to be associated with depressions in the plasma pressure. In this model, the observed changes in the magnetic field intensity and direction are due to diamagnetic currents that are carried by ions which drift in a sheath as the result of gradients in the magnetic field and in the plasma pressure within the sheath. The thickness of the sheaths considered is approximately a few ion Larmor radii. An electric field is normal to the magnetic field in the sheath. Solutions of Vlasov's equation and Maxwell's equations are presented which account for several types of magnetic holes, including null-sheets, that were observed.

Burlaga, L. F.↗

Interplanetary magnetic holes - Theory

Magnetic holes in the interplanetary medium are explained as stationary nonpropagating equilibrium structures in which there are field-aligned enhancements of the plasma density and/or temperature. Magnetic antiholes are considered to be associated with depressions in the plasma pressure. In this model the observed changes in the magnetic field intensity and direction are due to diamagnetic currents that are carried by ions which drift in a sheath as the result of gradients in the magnetic field and in the plasma pressure within the sheath. The thickness of the sheaths that we consider is approximately a few ion Larmor radii. An electric field is normal to the magnetic field in the sheath. Solutions of Vlasov's equation and Maxwell's equations are presented which account for several types of magnetic holes, including 'null sheets,' that have been observed.

Burlaga, L. F.↗

Dynamics of laser-induced surface phase explosion in silicon

Time-resolved ultrasonic studies revealed a second, delayed ablative pressure pulse after the first primary plasma pressure pulse in a silicon wafer irradiated by a UV nanosecond laser. The intensity-dependent delay time for the second pulse indicates the existence of a corresponding intensity-dependent homogeneous vapor bubble nucleation time in the superheated molten silicon prior to its phase explosion and ablative removal, since the integral pressure correlates with the ablation rate. A transient hot ablative plasma with calculated peak temperature {approx}30-90 eV and pressure {approx}20-110 GPa is suggested to superheat the bulk silicon via short-wavelength recombination and Bremsstrahlung emission.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DESIGN AND TESTING OF DIMES CARBON ABLATION RODS IN THE DIII-D TOKAMAK

We present the design of ATJ graphite rods developed for ablation experiments under high heat flux (up to 50 MW/m2) in the lower divertor of the DIII-D tokamak, a magnetic plasma confinement device. This work is motivated by the need to test ablation models relevant to carbon-based thermal shields used in high-speed spacecraft atmospheric entries, where the heat fluxes encountered can be comparable to those achieved in the DIII-D divertor plasma. Several different designs for the flowfacing side of the rod are analyzed, including "sharp nose," "blunt," and "concave". The last shape is studied for its potential to lower heat fluxes at the rod surface by increased radiation from trapped neutrals and reduced parallel plasma pressure. We also analyze the possibility of applying a thin (approximately 30 microns) layer of silicon carbide (SiC) to the exposed part of several carbon ablation rods to benchmark its erosion calculations and lifetime predictions. Such calculations are of interest as SiC represents a promising material for both thermal protection systems (TPS) and a fusion plasma-facing material (PFM). Preliminary results from the DIII-D rod ablation experiments are also discussed.

Orlov, Dmitri M.↗

Structure of the controlled halo-current magnetic field in the T-10 tokamak

In the T-10 tokamak, the magnetic field spatially resonant with a helical MHD perturbation is generated using the controlled halo current supplied using a contact method in the scrape-off-layer plasma. This paper is concerned with studying the spatial structure of the halo current and its magnetic field. For this purpose, the magnetic field of the halo current was measured in one of the cross sections of the torus near the tokamak vacuum vessel wall. The spatial distribution of the magnetic field as a function of the halo current configuration was calculated in the cylindrical approximation. The terms proportional to the plasma pressure were disregarded. The configuration of the halo current and the spatial structure of its magnetic field were determined by comparing the calculated and experimental results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The effect of gas flow on argon plasma discharge generated with a single-electrode configuration at atmospheric pressure

A long atmospheric-pressure plasma column confined in a dielectric tube is generated in argon with use of a single-electrode configuration driven with a sinusoidal power supply operating at 45 kHz. The electrical characteristics are investigated by means of measuring voltage-current and voltage-power curves at two gas flow states, turbulent and laminar. The gas temperatures of plasma discharge at various gas flow rates are determined by the spectroscopic analysis of OH A-X spectrum. The discussion about effect of gas flow on electrical discharge characteristics is presented and it is found that the heat removal by gas flow plays the most important role in determining its electrical characteristics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Synthesis and behavior of bulk iron nitride soft magnets via high-pressure spark plasma sintering

Abstract In this study, dense bulk iron nitrides (Fe x N) were synthesized for the first time ever using spark plasma sintering (SPS) of Fe x N powders. The Fe 4 N phase of iron nitride in particular has significant potential to serve as a new soft magnetic material in both transformer and inductor cores and electrical machines. The density of SPSed Fe x N increased with SPS temperature and pressure. The microstructure of the consolidated bulk Fe x N was characterized with X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and superconducting quantum interference device (SQUID) magnetometry. XRD revealed a primary phase of Fe 4 N with secondary phases of Fe 3 N and metallic iron. Finite element analysis (FEA) was also applied to investigate and explain localized heating and temperature distribution during SPS. The effects of processing on interface bonding formation and phase evolution were investigated and discussed in detail to provide insight into fundamental phenomena and microstructural evolution in SPSed Fe x N. Graphic abstract

36 MATERIALS SCIENCE↗

Physical Characteristics of Unstructured Coronal Clouds

Active regions in the inner solar corona, when observed in X-ray emission, consist of bright, hot loops surrounded by unstructured clouds. The emission from the clouds extends to a height of≈4–5×104km at temperatures of ≈2–3 MK. These “hot clouds” are variable, but persist for many days and do not appear to connect directly to the active region streamers or other large-scale structures observed higher in the corona. We present an observational analysis of these diffuse structures to establish basic plasma parameters such as magnetic field strength, particle density, and temperature. The values ofβ, the ratio of the plasma pressure to the magnetic field pressure, were found to be generally less than unity, though often approaching unity in the upper portions of the active region, where the hot clouds are located. The magnetic field may therefore only partially confine these regions and inhibit flare-like instabilities that could otherwise be driven by gradients of plasma pressure and current density.

The Sun↗

HIPED: Machine learning framework for spherical tokamak pedestal prediction and optimization

We introduce a Machine Learning framework, HIPED (HeIght and width Predictor for Edge Dynamics), for predicting and optimizing pedestal and core performance in spherical tokamak plasmas. Trained on pedestal and core datasets from the third MAST-U campaign, HIPED provides accurate estimates of pedestal height and width. The results reveal notable differences compared with conventional aspect-ratio studies; for instance, a simple power-law relation between pedestal width and height has very low accuracy. Instead, additional parameters such as normalized plasma pressure, elongation, and Greenwald fraction significantly improve accuracy. HIPED can also be trained only on `control room parameters' to inform experimentalists of which controllable parameters to adjust for improving core-integrated performance. The framework further includes a multi-objective optimization scheme that helps guide experimental planning and optimization. We find Pareto-optimal discharges with respect to various features, including distance from edge-localized modes and normalized plasma pressure, track their parameter trajectories over time, and identify the control room parameters required for these Pareto-optimal discharges. This provides a framework for systematically optimizing core and edge performance according to different experimental priorities.

Parisi, Jason F. [Princeton Plasma Physics Laborat↗

Surface currents on ideal plasmas

The surface (or 'skin') current that can flow at a perturbed interface between plasma and vacuum is considered in the approximation where a surface marks a sharp transition from plasma to vacuum. A short magnetohydrodynamic calculation gives an exact and general expression for the component perpendicular to the average of the magnetic field either side of the surface, finding it proportional to the edge plasma pressure. A consequence is that for all plasmas with zero surface current at equilibrium, the surface current associated with any linear instability will flow parallel to the magnetic field. The surface current is calculated for a simple but realistic model of a cylindrical plasma, and found to depend on the type of instability, and consequently on the particular plasma equilibrium. This is illustrated for two well known cases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A model of one-dimensional current sheet with parallel currents and normal component of magnetic field

We develop a model of a current sheet including field-aligned currents and a finite value of the normal component of magnetic field. The model is based on the conservation of a quasiadiabatic invariant of ion motion, while for electrons a fluid approach is used. A part of the current becomes parallel to the magnetic field due to the magnetic field shear, however the perpendicular component of the current is also present. The difference in the plasma pressure between the current sheet center and its boundaries decreases is only half of the value of the model free of parallel currents. We discuss the possible application of the model developed in this paper.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗