Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA RESONANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Conformal Thin Film Packaging for SiC Sensor Circuits in Harsh Environments

In this investigation sputtered silicon carbide annealed at 300 C for one hour is used as a conformal thin film package. A RF magnetron sputterer was used to deposit 500 nm silicon carbide films on gold metal structures on alumina wafers. To determine the reliability and resistance to immersion in harsh environments, samples were submerged in gold etchant for 24 hours, in BOE for 24 hours, and in an O2 plasma etch for one hour. The adhesion strength of the thin film was measured by a pull test before and after the chemical immersion, which indicated that the film has an adhesion strength better than 10(exp 8) N/m2; this is similar to the adhesion of the gold layer to the alumina wafer. MIM capacitors are used to determine the dielectric constant, which is dependent on the SiC anneal temperature. Finally, to demonstrate that the SiC, conformal, thin film may be used to package RF circuits and sensors, an LC resonator circuit was fabricated and tested with and without the conformal SiC thin film packaging. The results indicate that the SiC coating adds no appreciable degradation to the circuits RF performance. Index Terms Sputter, silicon carbide, MIM capacitors, LC resonators, gold etchants, BOE, O2 plasma

Scardelletti, Maximilian C.↗

Physics of E × B discharges relevant to plasma propulsion and similar technologies

This paper provides perspectives on recent progress in understanding the physics of devices in which the external magnetic field is applied perpendicular to the discharge current. This configuration generates a strong electric field that acts to accelerate ions. The many applications of this set up include generation of thrust for spacecraft propulsion and separation of species in plasma mass separation devices. These “E × B” plasmas are subject to plasma–wall interaction effects and to various micro- and macroinstabilities. In many devices we also observe the emergence of anomalous transport. This perspective presents the current understanding of the physics of these phenomena and state-of-the-art computational results, identifies critical questions, and suggests directions for future research.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Flowing plasma rearrangement in the presence of static perturbing fields

Charged particles interacting with electromagnetic waves have a portion of their energy tied up in wave-driven oscillations. When these waves are localized to the exhaust of linear magnetic confinement systems, this ponderomotive effect can be utilized to enhance particle confinement. The same effect can be derived for particles moving via an E×B drift into a region of a static perturbation to the electromagnetic fields which has a large wave vector component in the direction of the motion. In this work, we use a simplified slab model to self-consistently solve for the electromagnetic fields within the fluid flowing plasma of a static flute-like (k∥=0) perturbation and evaluate the resulting ponderomotive potential. We find that two types of perturbations can exist within the flowing plasma, which are an O wave and an X wave in the frame moving with the fluid. In the case of tenuous plasma, these perturbations are magnetostatic or electrostatic multipole-analog perpendicular to the guiding magnetic field in the lab frame, respectfully. For denser plasmas, the O wave-like perturbation is screened at the electron skin depth scale, and the X wave-like perturbation is a combination of a similar perpendicular electric perturbation and parallel magnetic perturbation. The ponderomotive potential generated in the X wave-like case is gyrofrequency-dependent and can be used as either potential barriers or potential wells, depending on the direction of the flow velocity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the importance of excited state species in low pressure capacitively coupled plasma argon discharges

In the past three decades, first principles-based fully kinetic particle-in-cell Monte Carlo collision (PIC/MCC) simulations have been proven to be an important tool for the understanding of the physics of low pressure capacitive discharges. However, there is a long-standing issue that the plasma density determined by PIC/MCC simulations shows quantitative deviations from experimental measurements, even in argon discharges, indicating that certain physics may be missing in previous modeling of the low pressure radio frequency (rf) driven capacitive discharges. In this work, we report that the energetic electron-induced secondary electron emission (SEE) and excited state atoms play an important role in low pressure rf capacitive argon plasma discharges. The ion-induced secondary electrons are accelerated by the high sheath field to strike the opposite electrode and produce a considerable number of secondary electrons that lead to additional ionizing impacts and further increase of the plasma density. Importantly, the presence of excited state species even further enhances the plasma density via excited state neutral and resonant state photon-induced SEE on the electrode surface. The PIC/MCC simulation results show good agreement with the recent experimental measurements in the low pressure range (1–10 Pa) that is commonly used for etching in the semiconductor industry. At the highest pressure (20 Pa) and driving voltage amplitudes 250 and 350 V explored here, the plasma densities from PIC/MCC simulations considering excited state neutrals and resonant photon-induced SEE are quantitatively higher than observed in the experiments, requiring further investigation on high pressure discharges.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Uniform field in microwave cavities through the use of effective magnetic walls

Wire medium (WM) resonators have emerged as a promising realization for plasma haloscopes—devices designed to detect axions, a potential component of dark matter. Key factors influencing the detection probability include cavity volume, resonance quality factor, and form factor. While the form factor has been explored for resonant frequency tuning, its optimization for axion detection remains unexplored. Here, in this work, we present an approach to significantly enhancing the form factor of WM plasma haloscopes. By shifting the metal walls of the resonator by a quarter wavelength, we effectively convert an electric wall boundary condition into a magnetic wall one, allowing for an almost uniform mode. Theoretical analysis and numerical simulations confirm that this modification improves the electric field profile and boosts the form factor, while also slightly enhancing the quality factor. We validate these findings through experimental results from two prototype resonators: one with a standard geometry and another with a quarter-wave air gap between the WM and the walls. Additionally, our method provides a simple way to control the field profile within WM cavities, which can be explored for further applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Disruption prevention using rotating resonant magnetic perturbation on J-TEXT

Major plasma disruption is one of the most critical issues to be solved for tokamak fusion reactors. Experiments to prevent mode locking and subsequent disruptions have been carried out on the J-TEXT tokamak using rotating resonant magnetic perturbations (RMPs). The tearing modes, which are locked and lead to disruptions without the application of RMPs, can be accelerated by rotating RMPs to the RMP frequency. As a result, mode locking and subsequent disruptions are delayed or prevented. The effects of RMP amplitude and frequency on disruption prevention have been investigated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Quantum-mechanical Treatment of Electron Broadening in Strong Magnetic Fields

Abstract Spectral line-shape fitting is an extremely useful tool in determining the gravity of white dwarf stars. This method is so far limited to nonmagnetic white dwarfs largely because the theory of line broadening in high magnetic fields is not as complete as in the nonmagnetic case. Current Stark+Zeeman models treat plasma particles classically and ignore the motion of the nucleus. We develop the formalism for a quantum-mechanical treatment of the perturbing electrons and include the nuclear motion as part of the broadening and explore their relative importance. The conditions we explore are those found in white dwarf and neutron star atmospheres. We find that, contrary to previous studies, the quantized perturbing electrons create more broadening than perturbers on a straight-path trajectory. Additionally, the quantization of the plasma electrons gives rise to resonances away from the line center. The nuclear motion creates an additional electric field, which also leads to an increase in line broadening; however, this effect in neutron star atmospheres is not as large as previously estimated. This suggests that neutron star spectral lines are sensitive to density and that their mass and radius can be obtained from spectral line fitting, which would help constrain the neutron star equation of state.

79 ASTRONOMY AND ASTROPHYSICS↗

Ion-cyclotron waves at Jupiter - Possibility of detection by Ulysses

Recent thermal plasma data and a computer code by Horne (1989) are employed to evaluate the linear-path-integrated gain of waves propagating through the Io to predict the Jovian plasma-wave environment. Estimates of the nonlinear saturation amplitudes are utilized with the thermal plasma data from two frequency bands to study the convective growth of the ion-cyclotron (IC) waves. Strong cyclotron resonant damping is theorized to prevent wave propagation to the lower latitudes, and the thermal plasma and cyclotron resonant energetic ions are expected to further confine the IC waves. L-mode waves below the O(+) gyrofrequency in the equatorial region of the torus are shown to inhabit an unstable region. The IC waves probably achieve nonlinear amplitudes regardless of plasma properties due to the rapid amplification in this region. It is suggested that the Ulysses data complicate the identification of the waves because the magnetometer is not adequately sensitive and because of the low frequency of the plasma-wave detector.

Mei, YI↗

On the instability and energy flux of lower hybrid waves in the Venus plasma mantle

Waves generated near the lower hybrid resonance frequency by the modified two stream instability have been invoked as a possible source of energy flux into the topside ionosphere of Venus. These waves are observed above the ionopause in a region known as the plasma mantle. The plasma within the mantle appears to be a mixture of magnetosheath and ionospheric plasmas. Since the magnetosheath electrons and ions have temperatures of several tens of eV, any instability analysis of the modified two stream instability requires the inclusion of finite electron and ion temperatures. Finite temperature effects are likely to reduce the growth rate of the instability. Furthermore, the lower hybrid waves are only quasi-electrostatic, and the energy flux of the waves is mainly carried by parallel Poynting flux. The magnetic field in the mantle is draped over the ionopause. Lower hybrid waves therefore cannot transport any significant wave energy to lower altitudes, and so do not act as a source of additional heat to the topside ionosphere.

Strangeway, R. J.↗

MARS-F/K modeling of plasma response and fast ion losses due to RMP in KSTAR

Abstract The toroidal single-fluid magnetohydrodynamic (MHD) code MARS-F (Liu et al 2000 Phys. Plasmas 7 3681) and the MHD-kinetic hybrid code MARS-K (Liu et al 2008 Phys. Plasmas 15 112503) are utilized to study the plasma response to the n = 1 ( n is the toroidal mode number) resonant magnetic perturbation (RMP), applied to suppress the type-I edge localized mode (ELM) in a KSTAR discharge. Both the resistive-rotating and ideal-static plasma models identify strong screening of the resonant radial field harmonics of the applied RMP due to the plasma response, and predict a strong edge-peeling response of the plasma which is consistent with the optimal ELM control coil current configuration adopted in experiment. The RMP-induced radial displacement of the plasma, computed by the resistive-rotating plasma model, agrees reasonably well with that reconstructed from the measured data in the plasma core. Taking into account the drift kinetic response of fast ions, MARS-K hybrid modeling also finds quantitative agreement of the plasma core fluid pressure perturbation with experiment. Based on the MARS-F computed plasma response, a guiding-center orbit-tracing simulation finds about 0.3% of fast ion losses due the n = 1 RMP in the KSTAR ELM control experiment considered. Most losses are associated with counter-current fast ions located near the plasma edge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Radial Alfven velocity profiles in the magnetosphere and their relation to ULF wave field-line resonances

The radial Alfven velocity, V(A), in the magnetosphere was investigated using magnetic field and plasma data from the ISEE-1 spacecraft. The harmonic frequency structure calculated from these data was compared with the observed resonant wave structure in the frequency range 5-100 mHz and over the region L = 3-9. It was found that the frequency of these resonances depend on the A(V), which is a function of the magnetic field strength and plasma density. The toroidal mode resonance frequency structure was modeled for the first four harmonics, with excellent agreement between the modeled and observed harmonics for a passs which does not show a plasmapause gradient. In the presence of a steep plasmapause gradient, the model was found to predict a correspondingly steep increase in the resonance frequencies at the plasmapause, by about 5 mHz for the first harmonic and by 20 mHz for the fourth harmonic. Special consideration is given to the effect of heavy ion mass loading on the modeling.

Fraser, B. J.↗

Heuristic predictions of RMP configurations for ELM suppression in ITER burning plasmas and their impact on divertor performance

Abstract A subspace of resonant magnetic perturbation (RMP) configurations for edge localized mode (ELM) suppression is predicted for H-mode burning plasmas at 15 MA current and 5.3 T magnetic field in ITER. Perturbations to the core plasma can be reduced by a factor of 2 for equivalent edge stability proxies, while the perturbed plasma boundary geometry remains mostly resilient. The striated domain of perturbed field lines connecting from the main plasma (normalized poloidal flux < 1 ) to the divertor targets is found to be significantly larger than the expected heat load width in the absence of RMPs. This facilitates heat load spreading with peak values at an acceptable level below 10 MW m − 2 on the outer target already at moderate gas fueling and low Ne seeding for additional radiative dissipation of the 100 MW of power into the scrape-off layer (SOL). On the inner target, however, re-attachment is predicted away from the equilibrium strike point due to increased upstream heat flux, higher downstream temperature and less efficient impurity radiation.

3D plasma boundary modeling↗

Analysis of an induced Langmuir wave by ponderomotive forces and its applicability for plasma diagnostics

We present a numerical study on the electron and ion density perturbation in low-temperature plasmas driven by the frequency detuning of two intense laser beams. Our study is performed in the hydrodynamic regime, which becomes applicable when the plasma grating period induced by the beating of the laser beams is greater than the Debye length and collective processes such as plasma oscillations can be excited. Our findings show a resonance in electron density perturbation as the frequency detuning approaches a value consistent with the Bohm–Gross dispersion relation in low- and high-pressure plasmas. We discuss the potential of this resonance as a diagnostic tool for precisely measuring electron temperature and density in low-temperature plasmas through coherent scattering.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Design of a Microwave Assisted Discharge Inductive Plasma Accelerator

A new plasma accelerator concept that employs electrodeless plasma preionization and pulsed inductive acceleration is presented. Preionization is achieved through an electron cyclotron resonance discharge that produces a weakly-ionized plasma at the face of a conical theta pinch-shaped inductive coil. The presence of the preionized plasma allows for current sheet formation at lower discharge voltages than those found in other pulsed inductive accelerators. The location of an electron cyclotron resonance discharge can be controlled through the design of the applied magnetic field in the thruster. A finite-element model of the magnetic field was used as a design tool, allowing for the implementation of an arrangement of permanent magnets that yields a small volume of preionized propellant at the coil face. This allows for current sheet formation at the face of the inductive coil, minimizing the initial inductance of the pulse circuit and maximizing the potential efficiency of the new accelerator.

Hallock, Ashley K.↗

Design of a Microwave Assisted Discharge Inductive Plasma Accelerator

The design and construction of a thruster that employs electrodeless plasma preionization and pulsed inductive acceleration is described. Preionization is achieved through an electron cyclotron resonance discharge that produces a weakly-ionized plasma at the face of a conical theta pinch-shaped inductive coil. The presence of the preionized plasma allows for current sheet formation at lower discharge voltages than those employed in other pulsed inductive accelerators that do not employ preionization. The location of the electron cyclotron resonance discharge is controlled through the design of the applied magnetic field in the thruster. Finite element analysis shows that there is an arrangement of permanent magnets that yields a small volume of resonant magnetic field at the coil face. Preionization in the resonant zone leads to current sheet formation at the coil face, which minimizes the initial inductance of the pulse circuit and maximizes the potential electrical efficiency of the accelerator. A magnet assembly was constructed around an inductive coil to provide structural support to the selected arrangement of neodymium magnets. Measured values of the resulting magnetic field compare favorably with the finite element model.

Hallock, Ashley K.↗

Modification of favorable average curvature effect by changing parallel sound wave behavior in tokamak plasmas

Abstract The favorable average curvature effect, also known as the GGJ effect (Glasser et al 1975 Phys. Fluids 18 875), is intrinsically associated with parallel sound wave propagation in a tokamak plasma. This work investigates how the GGJ effect is modified by changing the parallel sound wave behavior. Two physics models beyond the standard single fluid theory, i.e. an anisotropic thermal transport model and a parallel sound wave damping model, are employed to change parallel sound waves in a toroidal plasma, and the consequence on the GGJ effect is demonstrated for two important classes of problems, i.e. the resistive plasma response to the applied resonant magnetic perturbation and the stability of the tearing mode. Toroidal modeling reveals that the GGJ effect is significantly altered by both of the aforementioned physics effects. Compared to the thermal transport physics, which completely removes the GGJ effect, the sound wave damping effect only offers partial mitigation. The differences between these two models are further illustrated in terms of the radial structure of the shielding current and the eigenfunction of the tearing instability. In particular, a fundamental reason for complete suppression of the GGJ effect by the thermal transport is identified as an extra toroidal coupling of the poloidal harmonics.

Physics↗

Fast radio bursts from axion stars moving through pulsar magnetospheres

Here, we study the radio signals generated when an axion star enters the magnetosphere of a neutron star. As the axion star moves through the resonant region where the plasma-induced photon mass becomes equal to the axion mass, the axions can efficiently convert into photons, giving rise to an intense, transient radio signal. We show that a dense axion star with a mass ~10 -13 M ⊙ composed of ~10 μ eV axions can account for most of the mysterious fast radio bursts.

79 ASTRONOMY AND ASTROPHYSICS↗