Search NASA⌕ Search

SEARCH · Search NASA

Results for “Panelized”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Secondary Protection for 70 MPa Fueling - A White Paper from the Hydrogen Safety Panel

In developing a 70 megapascal (MPa) fueling infrastructure, it is critical to ensure that a vehicle equipped with a lower service pressure fuel tank is never filled from a 70 MPa fueling source. Filling of a lower service pressure vehicle at a 70 MPa fueling source is likely to result in a catastrophic event with severe injuries or fatalities. The Hydrogen Safety Panel recommends that DOE undertake a two-step process to address this issue: 1. Perform an independent risk analysis of a 70MPa dispenser filling a lower pressure vehicle tank and develop different approaches for prevention and mitigation to meet an acceptable level of safety. Cost effectiveness, reliability, advantages and disadvantages are among the factors that should be evaluated for each approach considered. 2. Until such time as this analysis is complete and any recommended actions implemented, communicate the potential risk to responsible parties and strongly encourage those parties to add a secondary layer of protection to the existing system of mechanically non-interchangeable nozzles/receptacles. This will reduce the probability of a pressure mismatch during this developmental phase for hydrogen fuel cell vehicles and infrastructure. This step can be reassessed after further analysis is completed and the need and effectiveness of secondary protection methods are evaluated. This paper provides background discussion of the problem, current safety systems and strategy and examples of potential future solutions to support the above recommendations.

08 HYDROGEN↗

Electrohydraulic Forming of Near-Net Shape Automotive Panels - Final CRADA Report

This report provides the results of a Cooperative Research and Development Agreement (CRADA) project between Pacific Northwest National Laboratory and the Ford Motor Company intended to demonstrate the relevance of using the electrohydraulic forming (EHF) process as a near-net-shape automotive panel manufacturing technology to simultaneously reduce the energy embedded in vehicles and the energy consumed while producing automotive structures. The application of EHF by automotive manufacturers and their suppliers could significantly reduce the amount of tooling, manufacturing equipment, and material input compared to conventional stamping technologies, while at the same time producing superior, near-net-shape stampings and parts. EHF represents a highly viable manufacturing technology because of its ability to form all types of sheet materials. Furthermore, the EHF process has been used to produce prototype components for commercialization evaluations at Ford. Given the results of this project, including the tensile tests and modeling presented in this report and further work performed internally at Ford, Ford Motor Company will remain active in the development and commercialization of the EHF manufacturing method.

Soulami, Ayoub↗

Bonded Bracket Assmebly for Frameless Solar Panels

In February 2011 the US Department of Energy announced their new Sunshot Initiative. The Sunshot goal is to reduce the total cost of solar energy systems by about 75 percent before the end of the decade. The DOE estimated that a total installed cost of $$1 per watt for photovoltaic systems would be equivalent to 5-6¢/kilowatt hour (kWh) for energy available from the grid. The DOE also estimated that to meet the $1 per watt goal, PV module costs would need to be reduced to $ .50 per watt, balance of systems costs would need to be reduced to $.40 per watt, and power electronic costs would need to reach $.10 per watt. To address the BOS balance of systems cost component of the $1 per watt goal, the DOE announced a funding opportunity called (BOS-X) Extreme Balance of System Hardware Cost Reductions. The DOE identified eight areas within the total BOS costs: 1) installation labor, 2) installation materials, 3) installation overhead and profit, 4) tracker, 5) permitting and commissioning, 6) site preparation, 7) land acquisition, 8) sales tax. The BOS-X funding announcement requested applications in four specific topics;Topic 1: Transformational Building Integrated Photovoltaic (BIPV) Modules; Topic 2: Roof and Ground Mount Innovations; Topic 3: Transformational Photovoltaic System Designs; and Topic 4: Development of New Wind Load Codes for PV Systems.The application submitted by ARaymond Tinnerman reflected the requirements listed in Topic #2, Roof and Ground Mount Innovations. The goal of topic #2 was to develop technologies that would result in the extreme reduction of material and labor costs associated with applications that require physical connections and attachments to roof and ground mount structures. The topics researched in this project included component cost reduction, labor reduction, weight reduction, wiring innovations, and alternative material utilization. The project objectives included; 1) The development of an innovative quick snap bracket assembly that would be bonded to frameless PV modules for commercial rooftop installations; 2) The development of a composite pultruded rail to replace traditional racking materials; 3) In partnership with a roofing company, pilot the certification of a commercial roof to be solar panel compliant, eliminating the need for structural analysis and government oversight resulting in significantly decreased permitting costs; and 4) Reduce the sum of all cost impacts in topic #2 from a baseline total of $2.05/watt to $.34/watt.

14 SOLAR ENERGY↗

CLIVAR Asian-Australian Monsoon Panel Report to Scientific Steering Group-18

These are a set of slides on CLIVAR Asian-Australian Monsoon Panel Report to Scientific Steering Group-18. These are the major topics covered within: major activities over the past year, AAMP Monsoon Diagnostics/Metrics Task Team, Boreal Summer Asian Monsoon, Workshop on Modelling Monsoon Intraseasonal Variability, Workshop on Interdecadal Variability and Predictability of the Asian-Australian Monsoon, Evidence of Interdecadal Variability of the Asian-Australian Monsoon, Development of MJO metrics/process-oriented diagnostics/model evaluation/prediction with MJOTF and GCSS, YOTC MJOTF, GEWEX GCSS, AAMP MJO Diabatic Heating Experiment, Hindcast Experiment for Intraseasonal Prediction, Support and Coordination for CINDY2011/DYNAMO, Outreach to CORDEX, Interaction with FOCRAII, WWRP/WCRP Multi-Week Prediction Project, Major Future Plans/Activities, Revised AAMP Terms of Reference, Issues and Challenges.

58 GEOSCIENCES↗

Belowground Carbon Cycling Processes at the Molecular Scale: An EMSL Science Theme Advisory Panel Workshop

As part of the Belowground Carbon Cycling Processes at the Molecular Scale workshop, an EMSL Science Theme Advisory Panel meeting held in February 2013, attendees discussed critical biogeochemical processes that regulate carbon cycling in soil. The meeting attendees determined that as a national scientific user facility, EMSL can provide the tools and expertise needed to elucidate the molecular foundation that underlies mechanistic descriptions of biogeochemical processes that control carbon allocation and fluxes at the terrestrial/atmospheric interface in landscape and regional climate models. Consequently, the workshop's goal was to identify the science gaps that hinder either development of mechanistic description of critical processes or their accurate representation in climate models. In part, this report offers recommendations for future EMSL activities in this research area. The workshop was co-chaired by Dr. Nancy Hess (EMSL) and Dr. Gordon Brown (Stanford University).

belowground carbon cycling↗

Advanced Fast Reactor - 100 (AFR-100) Report for the Technical Review Panel

This report is written to provide an overview of the Advanced Fast Reactor-100 in the requested format for a DOE technical review panel. This report was prepared with information that is responsive to the DOE Request for Information, DE-SOL-0003674 Advanced Reactor Concepts, dated February 27, 2012 from DOE’s Office of Nuclear Energy, Office of Nuclear Reactor Technologies. The document consists of two main sections. The first section is a summary of the AFR-100 design including the innovations that are incorporated into the design. The second section contains a series of tables that respond to the various questions requested of the reactor design team from the subject DOE RFI.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Weekly Update - Flat Panel Detector Procurement

The Neutron Imaging (NI) project has procured a Flat Panel Detector (FPD), which will allow multimodal imaging and high-quality CT imaging of dense objects. The FPD will provide a test bed for new scintillator formulations as well as new imaging techniques designed to improve the spatial resolution with which dense objects can be imaged.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

2020 Review Panel Workshop on Energy Intensity Indicators: Summary Findings and Meeting Notes

On January 28-29, 2020, the U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE), in coordination with Pacific Northwest National Laboratory (PNNL), sponsored an expert workshop focused on energy intensity indicators. The intent of the workshop was to support a comprehensive review of the EERE Energy Intensity Indicators (EII), a national system of indicators used to track changes in the energy intensity of economic sectors. One goal of the workshop was to gather input from a panel of experts who have experience and knowledge related to the EII methodological approach and key data sources used to calculate indicators for each of the end-use sectors of the economy—transportation, residential, commercial, industrial, and electricity. The current EERE EII methodology is documented in a 2017 PNNL report, A Comprehensive System of Energy Intensity Indicators for the U.S.: Methods, Data and Key Trends, which is available online. The workshop also included a presentation by Dr. Beng Ang, who discussed the Log Mean Divisia index (LMDI) approach to decomposition analysis, which was followed by a discussion concerning the methodological approaches that could be applied to future EII efforts.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Corrosion Control in Carbon Fiber Reinforced Plastic (CFRP) Composite-Aluminum Closure Panel Hem Joints

This project targeted the implementation of CFRP/Al closure panels as a drop-in replacement for all-aluminum closures used in automobile production today. The project focused on the development of corrosion fundamentals involving CFRP materials and the use of those materials in mixed-material joints. Numerous studies were completed to benchmark current materials and test mixed metal joints. Good correlation was found between outdoor exposures and laboratory cyclic corrosion testing. The insights from the corrosion testing fundamentals and benchmarking phases informed the development of low-cure adhesive and electrocoats and conductive primers for the CFRP. Adhesive and electrocoat materials were successfully developed meeting low-cure targets for bake (150C/10min). These materials were scaled-up and used to produce 5 prototype liftgates to further evaluate CFRP/Al joints in a full-scale part. The lower cure materials enabled mitigation of CTE mismatch and reduced the required bake temperature, resulting in reduced part distortion. Corrosion testing of the liftgates revealed unexpected increases in corrosion relative to the standard bake materials. While rigorous evaluation of the parts was not possible due to numerous complexities associated with prototype testing, the results provided significant insights into the material behavior of CFRP/Al joints. Key learnings from the project included a better understanding of the system complexity (interplay of substrate/primer conductivity, production of full-scale prototypes), advances in coating/adhesive design for low-cure applications involving CFRP, and advancement of corrosion test protocols for CFRP.

36 MATERIALS SCIENCE↗

Reduction of CO 2 Emissions Through Lightweight Body Panels (Project Final Report)

Lightweight construction is an integral part of Volkswagen’s overall strategy of reducing CO 2 emissions. Due to its low cost, steel is the most commonly used material for automotive exterior body panels today. Unfortunately, steel has a high density, resulting in a relatively low specific strength. Glass fiber based sheet molding compounds (SMC) provide high properties in combination with lower density. The high specific strength of SMC offers an enormous lightweight potential. To unlock the full potential of SMC materials in combination with cutting edge manufacturing processes, Volkswagen Group of America worked together with IACMI (Institute for Advanced Composites Manufacturing Innovation) and the academic partners: University of Tennessee Knoxville, Purdue University and Michigan State University; as well as the industry partners: Ashland, IDI, Owens Corning and Continental Structural Plastics. Leveraging the expertise of all project partners, reaching over the entire supply chain the project demonstrated the potential of these materials. This report will highlight the major steps in the development process on the way to technology readiness for SMC using the example of the Volkswagen Atlas Liftgate. Over the 36-month period of the project, the work focused on three R&D areas: material development, design and simulation, and development of the manufacturing process. Material selection included alternative fibers and resin systems, and accounted for material availability, properties, and cost-efficiency. The work undertaken in the field of design and simulation has pushed the envelope of short fiber reinforced thermoset molding compound process simulation. Design iterations were virtually tested, while the final design was used to validate the simulation software against physical parts. Manufacturing development used cutting-edge technology, while experts along the supply chain were working together to ensure the best possible results. In the final stage of the project, liftgates were molded, trimmed, bonded, painted and assembled before exhaustive testing. The result is an e-coat (electrophoretic dip coating) capable Class-A SMC liftgate, which is ready for high-volume production, and can be used as a technology demonstrator. The prototypes manufactured in the scope of this work have exhibited a mass reduction for the Volkswagen Atlas liftgate of up to 35% compared to the series production steel version, without a degradation of the functionalities.

36 MATERIALS SCIENCE↗

High-efficiency High-energy Photon Radiography Panels [Slides]

Demonstrate a developmental path towards production of efficient radiography panel for high energy radiography while keeping the production cost reasonable. Fulfill some needs identified in the research thrust GOR 2/K/b "Diagnostics systems".

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Mask Free OLED Fabrication Process for Non-Tunable and Tunable White OLED Panels

In this program we demonstrated a method for mask free fabrication of OLEDs. Conventional OLEDs use at least 2 shadowmasks during the fabrication process to define the deposition pattern for the organic layers and for the cathode layer. Although effective, the use of masks requires mask handling and mask change equipment which increases the cost of the OLED deposition system. New sets of masks are required for every new product design, and the mask sets require frequent cleaning as organic material builds up on the masks over time and can be a source of particle defects resulting in yield loss. The method investigated in this program uses laser removal of organic material to pattern the organic layers and define a moisture impermeable seal region. This method is digital and can be applied to any new panel design, avoiding the costs of new masks sets and associated yield loss. In addition, we developed a platform technology for producing white color tunable or dim-to-warm white OLEDs and demonstrated patterning of tunable white OLEDs using the low-cost mask free fabrication process.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Design Investigation of a Scalable Fast Neutron Radiography Panel

Advances in flat-panel radiography device design have increased the use of radiation imaging as a nondestructive evaluation tool. Neutron radiography offers many advantages compared to photon-based radiography.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Chemical and Cement Components 2021 Inventory Estimates for Additional Panels National Environmental Policy Act Analysis

This standard analysis report provides the estimates for the chemical (oxyanions and complexing agents) and cement components with a data collection cut-off date of December 31, 2021. These estimates will be included in a response to an inventory data request developed for the U.S. Department of Energy (DOE) performance assessment (PA) for the National Environmental Policy Act (NEPA) analysis on additional panels for the Waste Isolation Pilot Plant (WIPP).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Watch it again-or for the first time: Panel discussion and Q&A on First Lab Director J. Robert Oppenheimer

On June 19, 2023, at the National Security Sciences Building (NSSB) auditorium, LANL Director Thom Mason, LANL physicist Anna Llobet, American Prometheus author Kai Bird, and retired Senate staff member Tim Rieser discussed the life, work and legacy of first Lab Director J. Robert Oppenheimer. The panel event was moderated by LANL senior historian Alan Carr.

99 GENERAL AND MISCELLANEOUS↗

Cryomodule Compressed Air Panels

RF couplers require compressed air to maintain operational temperature and performance. Each type of cryomodule has a different configuration dependent on the number of RF cavities and their specifications. Compressed air panels will be mounted on the lifting brackets of the cryomodules to provide support for the hardware.

Herbst, Lilly↗