Search NASA⌕ Search

SEARCH · Search NASA

Results for “Passive Remote Sensing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Remote Sensing of Rain

The first problem addressed concerns passive-microwave rain retrievals. Most current approaches start by building off-line a cloud-model-derived database. Given data, the retrieval algorithms search the database for the microwave temperatures "closest" to the observed data, then after some fine-tuning (performed in different ways by different implementations) the rain is estimated to be that which corresponds to the selected (and fine-tuned) set of database temperatures. These approaches have three drawbacks: they cannot properly take into account the ambiguities which arise from the fact that several rain scenarios can produce the same observed temperatures; they are quite inefficient since they require manipulating a large database along with often complex "fine-tuning" procedures; and they cannot refine their estimates if additional data is available. This past year we have derived closed formulae relating observed microwave brightness temperatures, T(sub b), and the underlying rain rates, R: average T(sub b) =f (rain) and average rain = g (T(sub b)), along with the corresponding covariance matrices. These results are sufficient to describe the conditional probabilities p(R/T(sub b)) and p(T(sub b)/R) to second order. Progress has also been made towards deriving a robust description of the rain drop size distribution (DSD). The widespread approach consisting in parameterizing the DSD as a gamma-distribution in terms of the drop diameter D suffers from the facts that, in reality, the DSD is not a smooth function of D and that the largely arbitrary Gamma model imposes unintended behavior, which has implications on any quantities derived from the DSD model. We have therefore developed a non-parametric yet practical description of the DSD, which is particularly well-suited for use in remote-sensing applications. The diagram on the left shows a comparison between an actual DSD sample and the truncated non-parametric representation. One figure shows the relation between radar reflectivity and rain rate derived using this representation. Validation of the Tropical Rainfall Measuring Mission (TRMM) radar-radiometer combined R and DSD algorithm is underway. This algorithm was designed to make optimal use of the instantaneous reflectivity profiles measured by the TRMM radar and the microwave brightness temperatures measured by the TRMM passive radiometer. So far, it appears to be the most reliable TRMM rain algorithm.

Haddad, Ziad S.↗
NASA NTRS2021

Deep Domain Adaptation based Cloud Type Detection using Active and Passive Satellite Data

Domain adaptation techniques have been developed to handle data from multiple sources or domains. Most existing domain adaptation models assume that source and target domains are homogeneous, i.e., they have the same feature space. Nevertheless, many real world applications often deal with data from heterogeneous domains that come from completely different feature spaces. In our remote sensing application, data in source domain (from an active spaceborne Lidar sensor CALIOP onboard CALIPSO satellite) contain 25 attributes, while data in target domain (from a passive spectroradiometer sensor VIIRS onboard Suomi-NPP satellite) contain 20 different attributes. CALIOP has better representation capability and sensitivity to aerosol types and cloud phase, while VIIRS has wide swaths and better spatial coverage but has inherent weakness in differentiating atmospheric objects on different vertical levels. To address this mismatch of features across the domains/sensors, we propose a novel end-to-end deep domain adaptation with domain mapping and correlation alignment (DAMA) to align the heterogeneous source and target domains in active and passive satellite remote sensing data. It can learn domain invariant representation from source and target domains by transferring knowledge across these domains, and achieve additional performance improvement by incorporating weak label information into the model (DAMA-WL). Our experiments on a collocated CALIOP and VIIRS dataset show that DAMA and DAMA-WL can achieve higher classification accuracy in predicting cloud types.

domain adaptation↗
NASA NTRS1977

Microwave remote sensing of hydrologic parameters

A perspective on the implementation of microwave sensors in future airborne and spaceborne observations of hydrologic parameters is presented. The rationale is based on a review of the status and future trends of active (radar) and passive (radiometer) microwave research as applied to the remote sensing of soil moisture content, snowpack water equivalent, freeze/thaw boundaries, lake ice thickness, surface water area, and the specification of watershed runoff coefficients. Analyses and observations based on data acquired from ground based, airborne and spaceborne platforms, and an evaluation of advantages and limitations of microwave sensors are included.

Ulaby, F. T.↗
NASA NTRS2015

Multi-Angle Polarimetry: The Once and Future King of Aerosol Remote Sensing

Although aerosols (and their interactions with clouds) are widely known to be one of the most uncertain components of the climate, they remain largely unconstrained in climate simulations. This is because global observations of all the parameters relevant to such simulations - quantity, size, shape, optical properties and chemical composition - are very difficult to simultaneously retrieve from existing remote sensing instruments. The problem can be addressed by maximizing the scene information gathered by a remote sensing instrument, by the use of (passive) multi-spectral, multi-angle and polarimetrically sensitive sensors. These observations, coupled with a radiative transfer model, can be inverted to solve for aerosol parameters. However, the choices to be made when designing an such an observing system and retrieval algorithm are complex, and a variety of approaches have been undertaken by the scientific community. I will review the various multi-spectral, multi-angle, polarimetric observation systems employed for aerosol remote sensing and their corresponding retrieval algorithms. This includes the French Polarization and Directionality of Earth Reflectance (POLDER) instrument, which has been the only such instrument successfully deployed in orbit thus far (most recently from 2004-2013), the NASA Aerosol Polarimetry Sensor (APS) on the ill-fated NASA Glory Mission (launch failure in 2011), potential or planned polarimeters on the NASA Aerosol-Cloud-Ecosystem (ACE) and Pre-Aerosol, Clouds and ocean Ecosystems (PACE) missions, and airborne prototypes from around the world.

Knobelspiesse, Kirk↗
NASA NTRS2010

High-Precision Shape Control of In-Space Deployable Large Membrane/Thin-Shell Reflectors

This innovation has been developed to improve the resolutions of future spacebased active and passive microwave antennas for earth-science remote sensing missions by maintaining surface figure precisions of large membrane/thin-shell reflectors during orbiting. The intention is for these sensing instruments to be deployable at orbit altitudes one or two orders of magnitude higher than Low Earth Orbit (LEO), but still being able to acquire measurements at spatial resolution and sensitivity similar to those of LEO. Because active and passive microwave remote sensors are able to penetrate through clouds to acquire vertical profile measurements of geophysical parameters, it is desirable to elevate them to the higher orbits to obtain orbital geometries that offer large spatial coverage and more frequent observations. This capability is essential for monitoring and for detailed understanding of the life cycles of natural hazards, such as hurricanes, tropical storms, flash floods, and tsunamis. Major components of this high-precision antenna-surface-control system include a membrane/thin shell reflector, a metrology sensor, a controller, actuators, and corresponding power amplifier and signal conditioning electronics (see figure). Actuators are attached to the back of the reflector to produce contraction/ expansion forces to adjust the shape of the thin-material reflector. The wavefront-sensing metrology system continuously measures the surface figure of the reflector, converts the surface figure to digital data and feeds the data to the controller. The controller determines the control parameters and generates commands to the actuator system. The flexible, piezoelectric polymer actuators are thus activated, providing the control forces needed to correct any distortions that exist in the reflector surface. Piezoelectric polymer actuators are very thin and flexible. They can be implemented on the back of the membrane/thin-shell reflector without introducing significant amounts of mass or stiffness to the reflector. They can be rolled up or folded to accommodate the packaging needed for launch. An analytical model of the system, which includes the membrane reflector, actuator, and controller has been developed to investigate the functionality of this control system on a 35-meter-diameter membrane reflector. The performance of this system under external disturbances such as in space thermal loads and W-error due to inflation has been investigated. A subscale breadboard has been developed, and the functionality of this control concept has been demonstrated by this breadboard.

Watkins, Ronald↗
NASA NTRS1980

Passive microwave sensing of coastal area waters

A technique to remotely measure sea-surface temperature and salinity was demonstrated during the 1970's with a dual-frequency microwave radiometer system developed at the NASA Langley Research Center. Accuracies in temperature of 1 C and 1 part per thousand in salinity were obtained using state-of-the-art radiometers. Several aircraft programs for the measurement of coastal area waters demonstrating the application of the microwave radiometer system are discussed. Improvements of the microwave radiometer system during the 1980's and the design and development of new radiometer systems at other frequencies are outlined and related to potential applications.

Kendall, B. M.↗
NASA NTRS2012

Assimilation of Passive and Active Microwave Soil Moisture Retrievals

Root-zone soil moisture is an important control over the partition of land surface energy and moisture, and the assimilation of remotely sensed near-surface soil moisture has been shown to improve model profile soil moisture [1]. To date, efforts to assimilate remotely sensed near-surface soil moisture at large scales have focused on soil moisture derived from the passive microwave Advanced Microwave Scanning Radiometer (AMSR-E) and the active Advanced Scatterometer (ASCAT; together with its predecessor on the European Remote Sensing satellites (ERS. The assimilation of passive and active microwave soil moisture observations has not yet been directly compared, and so this study compares the impact of assimilating ASCAT and AMSR-E soil moisture data, both separately and together. Since the soil moisture retrieval skill from active and passive microwave data is thought to differ according to surface characteristics [2], the impact of each assimilation on the model soil moisture skill is assessed according to land cover type, by comparison to in situ soil moisture observations.

Draper, C. S.↗
NASA NTRSDate not supplied

Challenges in Remote-Sensing of Hail: Examining the Performance and Biases of Satellite Hail Retrievals Using Aqua MODIS Visible/IR and AMSR-E Passive-Microwave Observations

Hail poses threats to myriad aspects of human life and society, infrastructure, and agriculture. Scientifically, hail can often cause large errors in precipitation retrieval and estimation, posing challenges to establishing the current climatology of severe storms and their future trend in a changing Earth system. Fortunately, hailstorms exhibit distinct signatures in spaceborne remote-sensing datasets (e.g. overshooting cloud tops in visible/IR, or brightness temperature depressions in passive-microwave imagery). Approaches that leverage these signatures, however, are not without their pitfalls,: passive-microwave channels have large footprints and exhibit non-uniform beam filling. Visible/IR instruments have fine horizontal resolution but are limited by their insensitivity to processes occurring below cloud top. Large horizontal areas of smaller scatterers may also meaningfully lower the brightness temperatures, especially if they are able to occupy large portions of the footprint. Radiative transfer simulations show that low frequencies such as 19- and 37-GHz can be scattered to extremely low brightness temperatures by high concentrations of smaller (graupel-sized) ice scatterers, especially in larger features that are more likely to occupy the footprint, which may cause climatologies to overestimate the frequency severe hail. To address this, we investigate the nearly simultaneous and colocated MODIS (visible/IR) and AMSR-E (passive-microwave) onboard the Aqua satellite to leverage both datasets together, pairing AMSR-E and MODIS signatures of severe convection with ground-based weather radar, severe weather reports, and environmental parameters defined by the MERRA-2 reanalysis over CONUS, and then explore the performance and challenges of the algorithm when we expand outside the United States into six different geographical regimes throughout the Aqua domain.

Sarah D Bang↗
NASA NTRS1977

Remote sensing of atmospheric water vapor, liquid water and wind speed at the ocean surface by passive microwave techniques from the Nimbus-5 satellite

The microwave brightness temperature measurements for Nimbus-5 electrically scanned microwave radiometer and Nimbus E microwave spectrometer are used to retrieve the atmospheric water vapor, liquid water and wind speed by a quasi-statistical retrieval technique. It is shown that the brightness temperature can be utilized to yield these parameters under various weather conditions. Observations at 19.35 GHz, 22.235 GHz and 31.4 GHz were input to the regression equations. The retrieved values of these parameters for portions of two Nimbus-5 orbits are presented. Then comparison between the retrieved parameters and the available observations on the total water vapor content and the surface wind speed are made. The estimated errors for retrieval are approximately 0.15 g/sq cm for water vapor content, 6.5 mg/sq cm for liquid water content and 6.6 m/sec for surface wind speed.

Chang, A. T. C.↗
NASA NTRS1979

Remote sensing of atmospheric water vapor, liquid water, and wind speed at the ocean surface by passive microwave techniques from the Nimbus 5 satellite

The microwave brightness temperature measurements for Nimbus 5 electrically scanned microwave radiometer (ESMR) and Nimbus-E microwave spectrometer (NEMS) are used to retrieve the atmospheric water vapor, liquid water, and wind speed by a quasi-statistical retrieval technique. It is shown that the brightness temperature can be utilized to yield these parameters under various weather conditions. Observations at 19.35, 22.235, and 31.4 GHz were input to the regression equations. The retrieved values of these parameters for portions of two Nimbus 5 orbits are presented. Then comparison between the retrieved parameters and the available observations on the total water vapor content and the surface wind speed are made.

Chang, A. T. C.↗
NASA NTRS1981

Aircraft remote sensing of soil moisture and hydrologic parameters, Taylor Creek, Florida, and Little River, Georgia, 1979 data report

Experiments were conducted to evaluate aircraft remote sensing techniques for hydrology in a wide range of physiographic and climatic regions using several sensor platforms. The data were collected in late 1978 and during 1979 in two humid areas--Taylor Creek, Fla., and Little River, Ga. Soil moisture measurements and climatic observations are presented as well as the remote sensing data collected using thermal infrared, passive microwave, and active microwave systems.

Jackson, T. J.↗
NASA NTRS1991

Polar research from satellites

In the polar regions and climate change section, the topics of ocean/atmosphere heat transfer, trace gases, surface albedo, and response to climate warming are discussed. The satellite instruments section is divided into three parts. Part one is about basic principles and covers, choice of frequencies, algorithms, orbits, and remote sensing techniques. Part two is about passive sensors and covers microwave radiometers, medium-resolution visible and infrared sensors, advanced very high resolution radiometers, optical line scanners, earth radiation budget experiment, coastal zone color scanner, high-resolution imagers, and atmospheric sounding. Part three is about active sensors and covers synthetic aperture radar, radar altimeters, scatterometers, and lidar. There is also a next decade section that is followed by a summary and recommendations section.

Thomas, Robert H.↗
NASA NTRS1990

Progress in microwave remote sensing of soil moisture

Significant progress has been made in the application of microwave remote sensing for measuring soil moisture. Both passive and active systems have demonstrated the capability for measuring soil moisture. However, several questions are still unresolved regarding the optimal instrument configuration and other target characteristics, such as roughness and vegetation. In addition, the most likely disciplines for using these data, agriculture and hydrology, do not currently possess adequate models or procedures for using these new data.

Engman, Edwin T.↗
NASA NTRS1993

Polarimetric thermal emission from periodic water surfaces

Experimental results and theoretical calculations are presented to study the polarimetric emission from water surfaces with directional features. For our ground-based Ku-band radiometer measurements, a water pool was constructed on the roof of a building in the Jet Propulsion Laboratory, and a fiberglass surface with periodic corrugations in one direction was impressed on the top of the water surface to create a stationary water surface underneath it. It is observed that the measured Stokes parameters of corrugated fiberglass-covered water surfaces are functions of azimuth angles and agree very well with the theoretical calculations. The theory, after being verified by the experimental data, was then used to calculate the Stokes parameters of periodic surfaces without fiberglass surface layer and with rms height of the order of wind-generated water ripples. The magnitudes of the azimuthal variation of the calculated emissivities at horizontal and vertical polarizations corresponding to the first two Stokes parameters are found to be comparable to the values measured by airborne radiometers and SSM/I. In addition, the third Stokes parameter not shown in the literature is seen to have approximately twice the magnitude of the azimuth variation of either T(sub h) or T(sub v), which may make it more sensitive to the row direction, while less susceptive to noises because the atmospheric and system noises tend to be unpolarized and are expected to be cancelled out when the third Stokes parameter is derived as the difference of two or three power measurements, as indicated by another experiment carried out at a swimming pool with complicated surroundings. The results indicate that passive polarimetry is a potential technology in the remote sensing of ocean wind vector which is a crucial component in the understanding of global climate change. Issues related to the application of microwave passive polarimetry to ocean wind are also discussed.

Yueh, S. H.↗
NASA NTRS2008

Modeling the Impact of Drizzle and 3D Cloud Structure on Remote Sensing of Effective Radius

Remote sensing of cloud particle size with passive sensors like MODIS is an important tool for cloud microphysical studies. As a measure of the radiatively relevant droplet size, effective radius can be retrieved with different combinations of visible through shortwave infrared channels. MODIS observations sometimes show significantly larger effective radii in marine boundary layer cloud fields derived from the 1.6 and 2.1 pm channel observations than for 3.7 pm retrievals. Possible explanations range from 3D radiative transport effects and sub-pixel cloud inhomogeneity to the impact of drizzle formation on the droplet distribution. To investigate the potential influence of these factors, we use LES boundary layer cloud simulations in combination with 3D Monte Carlo simulations of MODIS observations. LES simulations of warm cloud spectral microphysics for cases of marine stratus and broken stratocumulus, each for two different values of cloud condensation nuclei density, produce cloud structures comprising droplet size distributions with and without drizzle size drops. In this study, synthetic MODIS observations generated from 3D radiative transport simulations that consider the full droplet size distribution will be generated for each scene. The operational MODIS effective radius retrievals will then be applied to the simulated reflectances and the results compared with the LES microphysics.

Platnick, Steven↗
NASA NTRS2015

Remote Sensing

Remote sensing is one of a suite of geospatial technologies that are having a growing impact in a wide variety of areas from commerce to science to public policy. The field of remote sensing evolved from the interpretation of aerial photographs to the analysis of satellite imagery, and from local area studies to global analyses, with advances in sensor system technologies and digital computing. Today remote sensor systems can provide data from energy emitted, reflected, and/or transmitted from all parts of the electromagnetic spectrum. Examples of applications of these data include population and demography studies, study of archaeological sites, energy studies using hydrological models, urban planning, environmental monitoring, environments, treaty enforcement, land use/land cover planning, weather forecasting, and agricultural production estimation, just to name a few. The material that follows provides a brief overview of the historical development of remote sensing, emphasizing the increasing complexity of platforms, systems, and tasks.

electromagnetic spectrum↗
NASA NTRS2017

Active and Passive 3D Vector Radiative Transfer with Preferentially-Aligned Ice Particles

For the purposes of interpreting active (radar) and passive (radiometer) microwave and millimeter wave remote sensing data, we have constructed a consistent radiative transfer modeling framework to simulate the responses for arbitrary sensors with differing sensing geometries and hardware configurations. As part of this work, we have implemented a recent method for calculating the electromagnetic properties of individual ice crystals and snow flakes. These calculations will allow us to exploit polarized remote sensing observations to discriminate different particles types and elucidate dynamics of cloud and precipitating systems.

Adams, Ian S.↗
NASA NTRS2022

Development of SMAP Retrievals for Forested Regions: SMAPVEX19-22 and SMAPVEX22-Boreal

The retrieval of soil moisture (SM) under forest canopy has long been an important goal for low frequency remote sensing. The NASA Soil Moisture Active Passive (SMAP) mission is engaged at three separate experiment sites to improve its SM retrieval algorithm in forested areas. Two of the sites are located in the deciduous forest region in Massachusetts and New York, US and one is located in southern boreal forest zone in Saskatchewan, Canada. Each site has a SM measurement network of about 20 stations spread out over an area of about 30 km, which covers the SMAP radiometer footprint. In 2022, intensive observations will be carried out at each site which involve deployments of an airborne instrument, which is similar to the SMAP instrument, and intensive manual measurements of SM, surface and vegetation. The measurements also include tower-based radiometer observations with ground truth measurements within the instrument footprint. Here we show some early results using the networks and SMAP measurements to analyze the sensitivity of the SMAP L-band measurements to SM changes in forested area and the impact of the vegetation to the signal. The results suggest an upper limit for vegetation attenuation accounting for surface roughness effect and relate that to the values used in the current SMAP SM products.

Yueh, Simon H.↗