Search NASA⌕ Search

SEARCH · Search NASA

Results for “Photometric Testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Special hematologic effects (M115), part E

All routine hematological measurements for the Skylab simulation test were within normal astronaut population limits for the CDR, SPT, and PLT, with one exception: A significant lymphopenia was observed in the PLT during the post test period, possibly the reflection of increased adrenal corticoid secretion. No ultrastructural red cell membrane abnormalities were observed in any of the subjects, nor were any red corpuscle morphological abnormalities noted. Slight elevations in the PLT's red corpuscular potassium were observed in the younger corpuscles after chamber entrance and again upon egress. This probably represents newly released young red cells from hematopoietic tissue. Flame photometric analyses confirm the fact that potassium is indeed higher in the younger cells of all subjects examined.

Kimzey, S. L.↗
NASA NTRS1976

Astronomical imaging applications for CCDs

Preliminary testing of a back illuminated, buried channel CCD camera for astronomical telescopic imaging applications was demonstrated. Images of several planets and both galactic and extragalactic ojects were obtained using a 400 x 400 element TI CCD in a JPL developed camera on a 154 cm telescope on Mt. Lemmon. The high quantum efficiency and relatively low noise of this CCD, along with the inherently high photometric and geometric stability, opens up new opportunities for astronomical research, especially in the spectral range from 0.8 to 1.0 micrometers. For example, images of Uranus obtained in the 0.89 micrometers absorption band of methane clearly reveal for the first time markings on the disk of this remote planet. Applications for both ground based and near earth orbiting telescopes are discussed.

Smith, B. A.↗
NASA NTRS2007

NASA Tech Briefs, September 2007

Topics covered include; Rapid Fabrication of Carbide Matrix/Carbon Fiber Composites; Coating Thermoelectric Devices To Suppress Sublimation; Ultrahigh-Temperature Ceramics; Improved C/SiC Ceramic Composites Made Using PIP; Coating Carbon Fibers With Platinum; Two-Band, Low-Loss Microwave Window; MCM Polarimetric Radiometers for Planar Arrays; Aperture-Coupled Thin-Membrane L-Band Antenna; WGM-Based Photonic Local Oscillators and Modulators; Focal-Plane Arrays of Quantum-Dot Infrared Photodetectors; Laser Range and Bearing Finder With No Moving Parts; Microrectenna: A Terahertz Antenna and Rectifier on a Chip; Miniature L-Band Radar Transceiver; Robotic Vision-Based Localization in an Urban Environment; Programs for Testing an SSME-Monitoring System; Cathodoluminescent Source of Intense White Light; Displaying and Analyzing Antenna Radiation Patterns; Payload Operations Support Team Tools; Space-Shuttle Emulator Software; Soft Real-Time PID Control on a VME Computer; Analyzing Radio-Frequency Coverage for the ISS; Nanorod-Based Fast-Response Pressure-Sensitive Paints; Capacitors Would Help Protect Against Hypervelocity Impacts; Diaphragm Pump With Resonant Piezoelectric Drive; Improved Quick-Release Pin Mechanism; Designing Rolling-Element Bearings; Reverse-Tangent Injection in a Centrifugal Compressor; Inertial Measurements for Aero-assisted Navigation (IMAN); Analysis of Complex Valve and Feed Systems; Improved Path Planning Onboard the Mars Exploration Rovers; Robust, Flexible Motion Control for the Mars Explorer Rovers; Solar Sail Spaceflight Simulation; Fluorine-Based DRIE of Fused Silica; Mechanical Alloying for Making Thermoelectric Compounds; Process for High-Rate Fabrication of Alumina Nanotemplates; Electroform/Plasma-Spray Laminates for X-Ray Optics; An Automated Flying-Insect Detection System; Calligraphic Poling of Ferroelectric Material; Blackbody Cavity for Calibrations at 200 to 273 K; KML Super Overlay to WMS Translator; High-Performance Tiled WMS and KML Web Server; Modeling of Radiative Transfer in Protostellar Disks; Composite Pulse Tube; Photometric Calibration of Consumer Video Cameras; Criterion for Identifying Vortices in High- Pressure Flows; Amplified Thermionic Cooling Using Arrays of Nanowires; Delamination-Indicating Thermal Barrier Coatings; Preventing Raman Lasing in High-Q WGM Resonators; Procedures for Tuning a Multiresonator Photonic Filter; Robust Mapping of Incoherent Fiber-Optic Bundles; Extended-Range Ultrarefractive 1D Photonic Crystal Prisms; Rapid Analysis of Mass Distribution of Radiation Shielding; Modeling Magnetic Properties in EZTB; Deep Space Network Antenna Logic Controller; Modeling Carbon and Hydrocarbon Molecular Structures in EZTB; BigView Image Viewing on Tiled Displays; and Imaging Sensor Flight and Test Equipment Software.

Source record↗
NASA NTRS1988

A photometric approach to detecting earth-sized planets

The photometric method for searching for planets around stars depends on the observation of the decrease in light flux produced by the transit of a planet across the stellar disk. It is shown that a three-year observation period should permit meaningful statements to be made about the frequency of solar-type planetary systems. A state-of-the-art photometer is being developed to test components and concepts. The goal is the development of a photometer that can routinely measure the relative brightness of stars to a precision of 1 part in 100,000.

Borucki, W. J.↗
DOE OSTI2015

Spin–orbit misalignment of two-planet-system KOI-89 via gravity darkening

We constrain the true spin–orbit alignment of the KOI-89 system by numerically fitting the two Kepler photometric light curves produced by the transiting planets KOI-89.01 and KOI-89.02. The two planets have periods of 84.69 and 207.58 days, respectively. We find that the two bodies are low-density giant planets with radii of 0.45 ± 0.03 R{sub jup} and 0.43 ± 0.05 R{sub jup} and spin–orbit misalignments of 72° ± 3° and 73{sub −5}{sup ∘+11}, respectively. Through dynamic stability tests, we demonstrate the general trend of higher system stability with the two planets close to mutual alignment and estimate their coalignment angle to 20° ± 20°—i.e., the planets are misaligned with the star but may be aligned with each other. From these results, we limit KOI-89's misalignment mechanisms to star–disk-binary interactions, disk warping via planet–disk interactions, planet–planet scattering, Kozai resonance, or internal gravity waves.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Spikey: self-lensing flares from eccentric SMBH binaries

Here, we examine the light curves of two quasars, motivated by recent suggestions that a supermassive black hole binary (SMBHB) can exhibit sharp lensing spikes. We model the variability of each light curve as due to a combination of two relativistic effects: the orbital relativistic Doppler boost and gravitational binary self-lensing. In order to model each system, we extend previous Doppler plus self-lensing models to include eccentricity. The first quasar is identified in optical data as a binary candidate with a 20-yr period (Ark 120), and shows a prominent spike. For this source, we rule out the lensing hypothesis and disfavour the Doppler-boost hypothesis due to discrepancies in the measured versus recovered values of the binary mass and optical spectral slope. The second source, which we nickname Spikey, is the rare case of an active galactic nucleus identified in Kepler’s high-quality, high-cadence photometric data. For this source, we find a model, consisting of a combination of Doppler modulation and a narrow symmetric lensing spike, consistent with an eccentric SMBHB with a mass of $M_{\text{tot}} = 3\times 10^{7} {\, \mathrm{M}_{\odot }}$, rest-frame orbital period T = 418 d, eccentricity e = 0.5, and seen at an inclination of 8° from edge-on. This interpretation can be tested by monitoring Spikey for periodic behaviour and recurring flares in the next few years. In preparation for such monitoring, we present the first X-ray observations of this object taken by the Neil Gehrels Swift Observatory.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Modelling the Milky Way – I. Method and first results fitting the thick disc and halo with DES-Y3 data

ABSTRACT We present a technique to fit the stellar components of the Galaxy by comparing Hess Diagrams (HDs) generated from trilegal models to real data. We apply this technique, which we call mwfitting, to photometric data from the first 3 yr of the Dark Energy Survey (DES). After removing regions containing known resolved stellar systems such as globular clusters, dwarf galaxies, nearby galaxies, the Large Magellanic Cloud, and the Sagittarius Stream, our main sample spans a total area of ∼2300 deg2. We further explore a smaller subset (∼1300 deg2) that excludes all regions with known stellar streams and stellar overdensities. Validation tests on synthetic data possessing similar properties to the DES data show that the method is able to recover input parameters with a precision better than 3 per cent. We fit the DES data with an exponential thick disc model and an oblate double power-law halo model. We find that the best-fitting thick disc model has radial and vertical scale heights of 2.67 ± 0.09 kpc and 925 ± 40 pc, respectively. The stellar halo is fit with a broken power-law density profile with an oblateness of 0.75 ± 0.01, an inner index of 1.82 ± 0.08, an outer index of 4.14 ± 0.05, and a break at 18.52 ± 0.27 kpc from the Galactic centre. Several previously discovered stellar overdensities are recovered in the residual stellar density map, showing the reliability of mwfitting in determining the Galactic components. Simulations made with the best-fitting parameters are a promising way to predict Milky Way star counts for surveys such as the LSST and Euclid.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2016

The Palomar Transient Factory and RR Lyrae: The metallicity–light curve relation based on AB-type RR Lyrae in the Kepler field

The wide-field synoptic sky surveys, known as the Palomar Transient Factory (PTF) and the intermediate Palomar Transient Factory (iPTF), will accumulate a large number of known and new RR Lyrae. These RR Lyrae are good tracers to study the substructure of the Galactic halo if their distance, metallicity, and galactocentric velocity can be measured. Candidates of halo RR Lyrae can be identified from their distance and metallicity before requesting spectroscopic observations for confirmation. This is because both quantities can be obtained via their photometric light curves, because the absolute V-band magnitude for RR Lyrae is correlated with metallicity, and the metallicity can be estimated using a metallicity–light curve relation. To fully utilize the PTF and iPTF light-curve data in related future work, it is necessary to derive the metallicity–light curve relation in the native PTF/iPTF R-band photometric system. In this work, we derived such a relation using the known ab-type RR Lyrae located in the Kepler field, and it is found to be [Fe/H]{sub PTF}=−4.089--7.346P+1.280ϕ{sub 31} (where P is pulsational period and ϕ{sub 31} is one of the Fourier parameters describing the shape of the light curve), with a dispersion of 0.118 dex. We tested our metallicity–light curve relation with new spectroscopic observations of a few RR Lyrae in the Kepler field, as well as several data sets available in the literature. Our tests demonstrated that the derived metallicity–light curve relation could be used to estimate metallicities for the majority of the RR Lyrae, which are in agreement with the published values.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1984

A comparison of the properties of highly polarized QSOs versus low-polarization QSOs

An optical linear-polarization survey testing the relationships between polarization and other properties of QSOs is presented. Polarimetric observations of 239 QSOs have been made. Data from the literature are used to analyze the relationships between polarization and radio, optical, and X-ray properties. The highly polarized QSOs are generally compact radio sources, are associated with radio properties such as low-frequency variability and superluminal motion, exhibit large-amplitude rapid photometric variability, have steep nonthermal optical continua, and may show excess X-ray emission. No relationship is seen between polarization and redshift, optical luminosity, or the equivalent width of emission lines. The results are discussed in the context of both isotropic and anisotropic (beaming) models. While the associations between the optical and radio properties of highly polarized QSOs provide strong motivation for the anisotropic model, the lack of associations with redshift, optical luminosity, and emission-line strength is inconsistent with this model. It is concluded that the highly polarized QSOs are probably fundamentally different in their physical properties from low-polarization QSOs.

Moore, R. L.↗
NASA NTRS2016

EVEREST: Pixel Level Decorrelation of K2 Light Curves

We present EPIC Variability Extraction and Removal for Exoplanet Science Targets (EVEREST), an open-source pipeline for removing instrumental noise from K2 light curves. EVEREST employs a variant of pixel level decorrelation to remove systematics introduced by the spacecraft’s pointing error and a Gaussian process to capture astrophysical variability. We apply EVEREST to all K2 targets in campaigns 0–7, yielding light curves with precision comparable to that of the original Kepler mission for stars brighter than K(sub p) ≈ 13, and within a factor of two of the Kepler precision for fainter targets. We perform cross-validation and transit injection and recovery tests to validate the pipeline and compare our light curves to the other de-trended light curves available for download at the MAST High Level Science Products archive. We find that EVEREST achieves the highest average precision of any of these pipelines for unsaturated K2 stars. The improved precision of these light curves will aid in exoplanet detection and characterization, investigations of stellar variability, asteroseismology, and other photometric studies. The EVEREST pipeline can also easily be applied to future surveys, such as the TESS mission, to correct for instrumental systematics and enable the detection of low signal-to-noise transiting exoplanets. The EVEREST light curves and the source code used to generate them are freely available online.

Catalogs↗
DOE OSTI2024

AuriDESI: mock catalogues for the DESI Milky Way Survey

The Dark Energy Spectroscopic Instrument Milky Way Survey (DESI MWS) will explore the assembly history of the Milky Way by characterizing remnants of ancient dwarf galaxy accretion events and improving constraints on the distribution of dark matter in the outer halo. We present mock catalogues that reproduce the selection criteria of MWS and the format of the final MWS data set. These catalogues can be used to test methods for quantifying the properties of stellar halo substructure and reconstructing the Milky Way’s accretion history with the MWS data, including the effects of halo-to-halo variance. The mock catalogues are based on a phase-space kernel expansion technique applied to star particles in the Auriga suite of six high-resolution lambda-cold dark matter magnetohydrodynamic zoom-in simulations. They include photometric properties (and associated errors) used in DESI target selection and the outputs of the MWS spectral analysis pipeline (radial velocity, metallicity, surface gravity, and temperature). They also include information from the underlying simulation, such as the total gravitational potential and information on the progenitors of accreted halo stars. We discuss how the subset of halo stars observable by MWS in these simulations corresponds to their true content and properties. These mock Milky Ways have rich accretion histories, resulting in a large number of substructures that span the whole stellar halo out to large distances and have substantial overlap in the space of orbital energy and angular momentum.

dynamics↗
DOE OSTI2015

Novel Monitoring Techniques for Characterizing Frictional Interfaces in the Laboratory

A pressure-sensitive film was used to characterize the asperity contacts along a polymethyl methacrylate (PMMA) interface in the laboratory. The film has structural health monitoring (SHM) applications for flanges and other precision fittings and train rail condition monitoring. To calibrate the film, simple spherical indentation tests were performed and validated against a finite element model (FEM) to compare normal stress profiles. Experimental measurements of the normal stress profiles were within -7.7% to 6.6% of the numerical calculations between 12 and 50 MPa asperity normal stress. The film also possessed the capability of quantifying surface roughness, an important parameter when examining wear and attrition in SHM applications. A high definition video camera supplied data for photometric analysis (i.e., the measure of visible light) of asperities along the PMMA-PMMA interface in a direct shear configuration, taking advantage of the transparent nature of the sample material. Normal stress over individual asperities, calculated with the pressure-sensitive film, was compared to the light intensity transmitted through the interface. We found that the luminous intensity transmitted through individual asperities linearly increased 0.05643 ± 0.0012 candelas for an increase of 1 MPa in normal stress between normal stresses ranging from 23 to 33 MPa.

47 OTHER INSTRUMENTATION↗
NASA NTRS1992

Precise ground-based solar photometry and variations of total irradiance

Several empirical models of sunspot and facular irradiance effects were tested by assessing the degree of correlation between variations in the total solar irradiance, as measured by the active cavity radiometer irradiance monitor on the SMM and the measures of magnetic activity on the solar disk. This was done by analyzing images made during 21 days between June 20 and July 14, 1988. The paper also describes the instruments and the methods used to gather the ground-based photometric images, as well as the analysis procedure.

Chapman, G. A.↗
NASA NTRS2001

Detection of Terrestrial Planets Using Transit Photometry

Transit photometry detection of planets offers many advantages: an ability to detect terrestrial size planets, direct determination of the planet's size, applicability to all main-sequence stars, and a differential brightness change of the periodic signature being independent of stellar distance or planetary orbital semi-major axis. Ground and space based photometry have already been successful in detecting transits of the giant planet HD209458b. However, photometry 100 times better is required to detect terrestrial planets. We present results of laboratory measurements of an end-to-end photometric system incorporating all of the important confounding noise features of both the sky and a space based photometer including spacecraft jitter. In addition to demonstrating an instrumental noise of less than 10 ppm (an Earth transit of a solar-like star is 80 ppm), the brightnesses of individual stars were dimmed to simulate Earth-size transit signals. These 'transits' were reliably detected as part of the tests.

Koch, David↗
NASA NTRS2008

Improved Linear Algebra Methods for Redshift Computation from Limited Spectrum Data - II

Given photometric broadband measurements of a galaxy, Gaussian processes may be used with a training set to solve the regression problem of approximating the redshift of this galaxy. However, in practice solving the traditional Gaussian processes equation is too slow and requires too much memory. We employed several methods to avoid this difficulty using algebraic manipulation and low-rank approximation, and were able to quickly approximate the redshifts in our testing data within 17 percent of the known true values using limited computational resources. The accuracy of one method, the V Formulation, is comparable to the accuracy of the best methods currently used for this problem.

Foster, Leslie↗
NASA NTRS2019

OGLE-2017-BLG-1186: First Application of Asteroseismology and Gaussian Processes to microlensing

We present the analysis of the event OGLE-2017-BLG-1186 from the 2017 Spitzer microlensing campaign. This is a remarkable microlensing event because its source is photometrically bright and variable, which makes it possible to perform an asteroseismic analysis using ground-based data. We find that the source star is an oscillating red giant with average timescale of ∼9 d. The asteroseismic analysis also provides us source properties including the source angular size (∼27 μas) and distance (∼11.5 kpc), which are essential for inferring the properties of the lens. When fitting the light curve, we test the feasibility of Gaussian processes (GPs) in handling the correlated noise caused by the variable source. We find that the parameters from the GP model are generally more loosely constrained than those from the traditional χ(exp 2) minimization method. We note that this event is the first microlensing system for which asteroseismology and GPs have been used to account for the variable source. With both finite-source effect and microlens parallax measured, we find that the lens is likely a ∼0.045 Mʘ brown dwarf at distance ∼9.0 kpc, or a ∼0.073 Mʘ ultracool dwarf at distance ∼9.8 kpc. Combining the estimated lens properties with a Bayesian analysis using a Galactic model, we find a ∼ 35 per cent probability for the lens to be a bulge object and ∼ 65 per cent to be a background disc object.

S.-S. Li↗
DOE OSTI2023

The impact of anisotropic redshift distributions on angular clustering

A leading way to constrain physical theories from cosmological observations is to test their predictions for the angular clustering statistics of matter tracers, a technique that is set to become ever more central with the next generation of large imaging surveys. Interpretation of this clustering requires knowledge of the projection kernel, or the redshift distribution of the sources, and the typical assumption is an isotropic redshift distribution for the objects. However, variations in the kernel are expected across the survey footprint due to photometric variations and residual observational systematic effects. Here, we develop the formalism for anisotropic projection and present several limiting cases that elucidate the key aspects. We quantify the impact of anisotropies in the redshift distribution on a general class of angular two-point statistics. In particular, we identify a mode-coupling effect that can add power to auto-correlations, including galaxy clustering and cosmic shear, and remove it from certain cross-correlations. If the projection anisotropy is primarily at large scales, the mode-coupling depends upon its variance as a function of redshift; furthermore, it is often of similar shape to the signal. In contrast, the cross-correlation of a field whose selection function is anisotropic with another one featuring no such variations — such as CMB lensing — is immune to these effects. We discuss explicitly several special cases of the general formalism including galaxy clustering, galaxy-galaxy lensing, cosmic shear and cross-correlations with CMB lensing, and publicly release a code to compute the biases.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Two Luminous Post-AGB Stars in the Galactic Globular Cluster M19

We report the discovery of a luminous “yellow” post–asymptotic giant branch (PAGB) star in the globular cluster (GC) M19 (NGC 6273), identified during our uBVI survey of Galactic GCs. The uBVI photometric system is optimized to detect stars with large Balmer discontinuities, indicating very low surface gravities and high luminosities. The spectral energy distribution (SED) of the star is consistent with an effective temperature of about 6250 K and a surface gravity of logg=0.5. We use Gaia data to show that the star’s proper motion and radial velocity are consistent with cluster membership. One aim of our program is to test yellow PAGB stars as candidate Population II standard candles for determining extragalactic distances. We derive a visual absolute magnitude of M {sub V} = − 3.39 ± 0.09 for the M19 star. This is in close agreement with the M {sub V} values found for yellow PAGB stars in the GCs ω Cen, NGC 5986, and M79, indicating a very narrow luminosity function. These objects are 4 mag brighter than RR Lyrae variables, and they can largely avoid the issues of interstellar extinction that are a problem for Population I distance indicators. We also identified a second luminous PAGB object in M19, this one a hotter “UV-bright” star. Its SED is consistent with an effective temperature of about 11,750 K and logg=2.0. The two objects have nearly identical bolometric luminosities, logL/L{sub ⊙}=3.24 and 3.22, respectively.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗