Search NASA⌕ Search

SEARCH · Search NASA

Results for “Plasma materials processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

MRT 7365: Power flow physics and key physics phenomena

The Z accelerator at Sandia National Laboratories conducts z-pinch experiments at 26 MA in support of DOE missions in stockpile stewardship, dynamic materials, fusion, and other basic sciences. Increasing the current delivered to the z-pinch would extend our reach in each of these disciplines. To achieve increases in current and accelerator efficiency, a fraction of Z’s shots are set aside for research into transmission-line power flow. These shots, with supporting simulations and theory, are incorporated into this Advanced Diagnostics milestone report. The efficiency of Z is reduced as some portion of the total current is shunted across the transmission-line gaps prior to the load. This is referred to as “current loss”. Electrode plasmas have long been implicated in this process, so the bulk of dedicated power-flow experiments are designed to measure the plasma environment. The experimental analyses are enhanced by simulations conducted using realistic hardware and Z voltage pulses. In the same way that diagnostics are continually being improved for sensitivity and resolution, the modeling capability is continually being improved to provide faster and more realistic simulations. The specifics of the experimental hardware, diagnostics, simulations, and algorithm developments are provided in this report. The combined analysis of simulation and data confirms that electrode plasmas have the most detrimental impact on current delivery. Experiments over the last three years have tested the theoretical current-loss mechanisms of enhanced ion current, plasma gap closure, and Hall-related current. These mechanisms are not mutually exclusive and may be coincident in the final feed as well as in upstream transmission lines. The final-feed geometries tested here, however, observe lower-density plasmas without dominant ion currents which is consistent with a Hall-related current. The picture of plasma formation and transport formed from experiment and simulation is informing hardware designs being fielded on Z now and being proposed for the Next-Generation Pulsed Power (NGPP) facility. In this picture, the strong magnetic fields that heat the electrodes above particle emission thresholds also confine the charged particles near the surface. Some portion of the plasmas thus formed is transported into the transmission-line gap under the force of the electric field, with aid from plasma instabilities. The gap plasmas are then transported towards the load by a cross-field drift, where they accumulate and contribute to a likely Hall-related cross-gap current. The achievements in experimental execution, model validation, and physical analysis presented in this report set the stage for continued progress in power flow and load diagnostics on Z. The planned shot schedule for Z and Mykonos will provide data for extrapolation to higher current to ensure the predicted performance and efficiency of a NGPP facility.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Synthesis‐Related Nanoscale Defects in Mo‐Based Janus Monolayers Revealed by Cross‐Correlated AFM and TERS Imaging

2D Janus transition metal dichalcogenides (TMDs) are promising candidates for various applications including non-linear optics, energy harvesting, and catalysis. These materials are usually synthesized via chemical conversion of pristine TMDs. Nanometer-scale characterization of the obtained Janus materials’ morphology and local composition is crucial for both the synthesis optimization and the future device applications. In this work, we present the results of cross-correlated atomic force microscopy (AFM) and tip-enhanced Raman spectroscopy (TERS) study of Janus monolayers synthesized by the hydrogen plasma-assisted chemical conversion of MoSe 2 and MoS 2 . We demonstrate that the choice of both the growth substrate and the starting TMD influences the residual strain, thereby shaping the nanoscale morphology of the resulting Janus material. Furthermore, by employing TERS imaging, we show the presence of nanoscale islands (≈20 nm across) of MoSe 2 - ${\mathrm{Mo}}_{{\mathrm{Se}}}^{\mathrm{S}}$ (MoS 2 -${\mathrm{Mo}}_{\mathrm{S}}^{{\mathrm{Se}}}$) vertical heterostructures originating from the bilayer nanoislands in the precursor monolayer crystals. The understanding of the origins of nanoscale defects in Janus TMDs revealed in this study can help with further optimization of the Janus conversion process towards uniform and wrinkle-/crack-free Janus materials. Moreover, this work shows that cross-correlated AFM and TERS imaging is a powerful and accessible method for studying nanoscale composition and defects in Janus TMD monolayers.

2D materials↗
DOE OSTI2022

Exploration of methods to remove implanted 210 Pb and 210 Po contamination from silicon surfaces

Radioactive contaminants on the surfaces of detector components can be a problematic source of background events for physics experiments searching for rare processes. Exposure to radon is a specific concern because it can result in the relatively long-lived 210 Pb (and progeny) being implanted to significant subsurface depths such that removal is challenging. Here, in this article, we present results from a broad exploration of cleaning treatments to remove implanted 210 Pb and 210 Po contamination from silicon, which is a material frequently used in rare-events searches. We demonstrate for the first time that heat treatments (“baking”) can effectively mitigate such surface contamination, with a 1200 °C bake resulting in a 97$^{+2}_{-3}$% reduction. We also report results using wet-chemistry and plasma-based methods, which show that etching can be highly effective provided the etch depth is sufficiently aggressive. Our survey of cleaning methods suggests consideration of multiple approaches during the different phases of detector construction to enable greater flexibility for efficient removal of 210 Pb and 210 Po surface contamination.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Laser-Induced Spectrochemical Assay for Uranium Enrichment (LISA-UE)

Uranium hexafluoride (UF6) is the uranium compound typically involved in uranium enrichment process. As the first line of defense against nuclear proliferation, accurate determinations of the uranium enrichment ratio in UF6 are critical for materials verification, accounting and safeguards. Shipping gaseous UF6 samples off-site for analysis with mass spectrometry is cumbersome and costly, and results are not available for some time (months). In-field UF6 enrichment assay has the potential to substantially reduce the time, logistics and expense of sample handling. At present, COMPUCEA is the only accepted method for UF6 enrichment assay in the field. Laser-Induced Spectrochemical Assay for Uranium Enrichment (LISA-UE) is an all-optical (based on laser induced plasma emission) analytical technique intended for fieldable, accurate, precise and rapid UF6 enrichment assay. In its operation, laser induced plasma is created directly in the gaseous UF6 sample. Because different U isotopes emit at slightly different wavelengths, the isotopic information of the UF6 sample is inherently encoded in the atomic emission from the plasma. Isotopic emissions from 235U and 238U are measured simultaneously, which eliminate correlated noise from the laser induced plasma. Isotopic information of the UF6 sample can be extracted from the acquired spectrum with theoretical multi-variable non-linear spectral fitting. To date, advances made by the LISA-UE research team include optimization of the spectral window for direct gaseous UF6 enrichment assay with laser induced plasma, development of data reduction algorithms, and demonstrations of the LISA-UE technique with gaseous UF6 samples. In this presentation, the technical aspect of LISA-UE will be overviewed, the data reduction algorithm will be described, and performance of the technique will be discussed.

Chan, George↗
DOE OSTI2023

Growth or Decay – I: universality of the turbulent dynamo saturation

The turbulent small-scale dynamo (SSD) is likely to be responsible for the magnetisation of the interstellar medium (ISM) that we observe in the Universe today. The SSD efficiently converts kinetic energy E kin into magnetic energy E mag , and is often used to explain how an initially weak magnetic field with E mag $\ll$ E kin is amplified, and then maintained at a level E mag ≲ E kin . Usually, this process is studied by initialising a weak seed magnetic field and letting the turbulence grow it to saturation. However, in this Part I of the Growth or Decay series, using three-dimensional, visco-resistive magnetohydrodynamical turbulence simulations up to magnetic Reynolds numbers of 2000, here we show that the same final state in the integral quantities, energy spectra, and characteristic scales of the magnetic field can also be achieved if initially E mag ~ E kin or even if initially E mag $\gg$ E kin . This suggests that the final saturated state of the turbulent dynamo is set by the turbulence and the material properties of the plasma, independent of the initial structure or amplitude of the magnetic field. We discuss the implications this has for the maintenance of magnetic fields in turbulent plasmas and future studies exploring the dynamo saturation.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Development of Corrosion- and Erosion-Resistant Coatings for Advanced Ultra-Supercritical Materials

This final report summarized the research efforts and major findings of the Phase I Project “Development of Corrosion- and Erosion-Resistant Coatings for Advanced Ultra-Supercritical Materials”, for the period of October 1, 2019 – Sept. 30, 2021. This project is a collaborative endeavor between Tennessee Tech University, Purdue University, Oak Ridge National Laboratory, Siemens Corporation, and Eastern Plating, LLC, aiming at improving the durability and lifetime of high-pressure (HP) steam turbine blades in advanced ultra-supercritical (A-USC) coal-fired power plants through the development of corrosion/erosion-resistant coatings manufactured via a low-cost electrolytic codeposition process. While Tribaloy alloy T-400C was identified by the U.S. A-USC Materials Consortium as a promising coating composition, further composition optimization is needed to enhance its corrosion and erosion resistance for protecting the A-USC Ni-base turbine components. An integrated computational and experimental approach was employed to optimize coating composition/microstructure and processing parameters. In order to identify candidate coating compositions that could offer balanced properties, thermodynamic calculations were performed to explore the γ+Laves composition space in the Co-Ni-Cr-Mo-Si system with different alloying additions at 600-800 °C. Guided by the calculation results, experimental assessment of selected alloys led to the development of a new generation of Tribaloy compositions with the optimal levels of Cr, Mo and Si, reactive element (e.g., 0.4-0.6 wt.% Y) and other alloying additions. The low-cost and non-line-of-sight electro-codeposition process was employed to deposit a Ni(Co)-CrMoSiY composite coating on commercial Haynes 282 (H282) Ni-base alloy. A diffusion treatment was subsequently applied to convert the composite to the Tribaloy-type coating. Both the codeposition parameters and heat treatment conditions were varied to achieve the desired coating composition, microstructure and phase constituents. In addition, since additive manufacturing (AM) may be an alternative cost-saving option for potential A-USC turbine repair, laser direct deposition was explored to fabricate the H282 alloy with minimal defects. The electro-codeposited Tribaloy coating was also applied to the AM H282 substrate to demonstrate the viability of the coating process in improving the surface finish of AM alloys. Both high-temperature oxidation performance and solid particle erosion (SPE) resistance of model alloys and electro-codeposited coatings were evaluated. About 25 model alloys with various Cr/Mo ratios and reactive element levels, as well as partial substitution of Mo with Nb were evaluated with regard to their oxidation resistance in both air and pure steam at 760-800°C. Compositions based on Ni(Co)-20Cr-18Mo-2.6Si-0.6Y (wt.%) showed significantly improved oxidation resistance over the baseline T400-C. Based on the alloy development results, three generations of new Tribaloy coatings (Gen-1, Gen-2, and Gen-3) with various Mo/Cr contents and Y levels were prepared via electro-codeposition and their microstructure/performance were evaluated. Outstanding air and steam oxidation resistance was achieved for the Gen-2 and Gen-3 coatings. Furthermore, while the SPE resistance of the coatings depended on many factors such as temperature, environment, erodent, velocity and impact angle, the coated samples exhibited similar or better SPE resistance compared to the H282 substrate when magnetite was used as erodent (which is a realistic erodent in A-USC steam turbines). The new Tribaloy coatings also had good long-term compatibility with the H282 alloy substrate. The two large-sized rotating barrels were designed, constructed, and employed to coat dummy HP blades. Uniform coating thickness and microstructure were achieved at various blade locations. Also, a preliminary techno-economic analysis of the proposed coating process was conducted to quantify the cost-effectiveness and to assess the commercial viability of the corrosion- and erosion-resistant coatings. It is estimated that a cost reduction of ~30% could be achieved with the electro-codeposition coating process over the state-of-the-art high velocity oxygen fuel (HVOF) thermal spray. Compared to the leading Tribaloy coating technologies such as HVOF and plasma transfer alloying, electro-codeposition based process has advantages such as low-cost process equipment, uniform deposition even for complex shapes, low levels of contaminants/porosities, reduction of powder waste, and potentially better surface finish and longer turbine service life. The Phase 1 study has demonstrated that it is feasible to develop an electro-codeposited Tribaloy coating with balanced corrosion and erosion properties, even though additional research efforts such as further coating process scale-up and longer-term performance evaluation under realistic A-USC conditions are clearly needed.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2025

Surrogate models to optimize plasma-assisted atomic layer deposition in high aspect ratio features

In this work, we explore surrogate models to optimize plasma enhanced atomic layer deposition (PEALD) in high aspect ratio features. In plasma-based processes such as PEALD and atomic layer etching (ALE), surface recombination can dominate the reactivity of plasma species with the surface, which can lead to unfeasibly long exposure times to achieve full conformality inside nanostructures like high aspect ratio vias. Using a synthetic dataset based on simulations of PEALD, we train artificial neural networks to predict saturation times based on cross section thickness data obtained for partially coated conditions. The results obtained show that just two experiments in undersaturated conditions contain enough information to predict saturation times within 10% of the ground truth. A surrogate model trained to determine whether surface recombination dominates the plasma–surface interactions in a PEALD process achieves 99% accuracy. This demonstrates that machine learning can provide a new pathway to accelerate the optimization of PEALD processes in areas such as microelectronics. Our approach can be easily extended to ALE and more complex structures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Galvanic Transformation Dynamics in Heterostructured Nanoparticles

Corrosion is a significant problem for the stability of structural metals and potentially for functional nanomaterials in operating environments. When two metals with different electrochemical potentials form a junction, galvanic corrosion occurs, resulting in the sacrificial dissolution of the metal with a higher oxidation potential (lower electrode potential). In this report it is shown that bimetallic hetero-nanostructures composed of phase-segregated metals undergo galvanic corrosion in aqueous environments. Such selective etching of the sacrificial metal in heterojunction particles leads to the formation of unusual and kinetically stabilized half-spheroid particles. By using a fluid cell and in situ scanning transmission electron microscopy, a two-stage corrosion process can be observed where the Cu experiences a fractal breakdown before the Ag corrodes due to the lack of a protective oxide layer. However, when treated with a mild Ar plasma, the stability of these structures against corrosion is enhanced due to the conversion of the amorphous native oxide to a denser, thin layer of CuO on the Cu surface. Taken together, this work highlights the importance of considering the effects of galvanic corrosion on the stability of multicomponent nanoparticles, and it shows how mass transport in a nanoscale system is influenced by redox processes.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Work function measurements of clean and modified carbon nanospikes

Carbon surfaces incorporating densely packed spikes with nanometer sharpness have shown exceptional electrocatalytic properties attributed to the enhanced electric field from the topography of the spikes. In this article, the composition of nanospike surfaces is identified by x-ray photoelectron spectroscopy (XPS) and their absolute work function determined using ultraviolet photoemission spectroscopy (UPS). Low temperature annealing of as-grown samples above 275 °C is required to produce a clean surface which has a 4.13 eV work function, a half volt lower than that of flat graphite. Treatments that contaminate the spiked surface, including exposure to air, oxidation at elevated temperature, or immersion in water or hydrocarbons, all increase the work function. Processing that blunts the spikes, including exposure to an oxygen plasma, argon sputtering, or high temperature annealing (800 °C) result in a work function close to that of flat graphite. An unusual double onset in the UPS secondary electron intensity is observed on as-grown nanospike samples and is reproduced by absorbing hydrocarbons on the surface. In conclusion, this double onset appears to be unique to carbon substrates and may originate in inelastic scattering of photoelectrons.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Beyond Solvothermal: Alternative Synthetic Methods for Covalent Organic Frameworks

Abstract Covalent organic frameworks (COFs) are crystalline porous organic materials that hold a wealth of potential applications across various fields. The development of COFs, however, is significantly impeded by the dearth of efficient synthetic methods. The traditional solvothermal approach, while prevalent, is fraught with challenges such as complicated processes, excessive energy consumption, long reaction times, and limited scalability, rendering it unsuitable for practical applications. The quest for simpler, quicker, more energy‐efficient, and environmentally benign synthetic strategies is thus paramount for bridging the gap between academic COF chemistry and industrial application. This Review provides an overview of the recent advances in alternative COF synthetic methods, with a particular emphasis on energy input. We discuss representative examples of COF synthesis facilitated by microwave, ultrasound, mechanic force, light, plasma, electric field, and electron beam. Perspectives on the advantages and limitations of these methods against the traditional solvothermal approach are highlighted.

Hu, Jiyun↗
DOE OSTI2023

Beyond Solvothermal: Alternative Synthetic Methods for Covalent Organic Frameworks

Abstract Covalent organic frameworks (COFs) are crystalline porous organic materials that hold a wealth of potential applications across various fields. The development of COFs, however, is significantly impeded by the dearth of efficient synthetic methods. The traditional solvothermal approach, while prevalent, is fraught with challenges such as complicated processes, excessive energy consumption, long reaction times, and limited scalability, rendering it unsuitable for practical applications. The quest for simpler, quicker, more energy‐efficient, and environmentally benign synthetic strategies is thus paramount for bridging the gap between academic COF chemistry and industrial application. This Review provides an overview of the recent advances in alternative COF synthetic methods, with a particular emphasis on energy input. We discuss representative examples of COF synthesis facilitated by microwave, ultrasound, mechanic force, light, plasma, electric field, and electron beam. Perspectives on the advantages and limitations of these methods against the traditional solvothermal approach are highlighted.

Hu, Jiyun↗
DOE OSTI2024

Report Summarizing the Mechanical Properties of a Large ODS Ferritic Alloy Ingot by Forging at High Temperatures for Future Mother Tube Production

Oxide dispersion strengthened (ODS) ferritic alloys are considered the benchmark fuel cladding and core structural material in advanced nuclear energy reactors that require high-temperature strength and creep properties and resistance to radiation damage. The ODS ferritic alloys including 14YWT are produced by mechanical alloying (MA), which is time-consuming and is associated with high manufacturing costs that are not beneficial to being used in advanced nuclear energy reactors. This report summarizes the accomplishments in FY24 in the INM program for producing an ODS ferritic alloy by high-deformation, high-temperature processing of reactive and ferritic alloy powders for advanced reactor fuel cladding applications. Following four hot forging experiments, it was concluded that several significant challenges were encountered that were difficult to overcome. These challenges were related to using high annealing temperatures for pressure assisted sintering processes to produce dense microstructures, but the high annealing temperatures result in long range diffusion of Ti through the bcc Fe lattice and react with the YIG particles that are distributed on the prior surfaces of the ferritic alloy powders. In addition, it was determined that the high deformations induced by forging at high temperatures were not very effective for fracturing the reactive YIG particles into smaller particles and distributing them into the interior of the ferritic alloy powders. Spark plasma sintering was attempted for shortening the time at high temperatures, which led to full densification but the microstructure characterization results still showed that Ti atoms diffused over long distances in the bcc Fe lattice and reacted with the YIG particles. Finally, a short 30 minute high intensity ball milling experiment was conducted on blended 14WT and YIG powders for inducing severe deformations that caused the initially spherical powders of 14WT decorated with the YIG particles on the surfaces to transform to flakes and fracturing of YIG particles into smaller particles that were incorporated into the bcc Fe lattice. Two forgings were performed with the high intensity milled powders: first annealing for 20 minutes at 850ºC followed by forging and second annealing for 20 minutes at 1,100ºC followed by forging. At 850ºC, Ti atoms are effectively immobile, thus allowing for densification albeit incomplete. The deformation by forging after annealing for 20 minutes at 1,100ºC favored dynamic recrystallization processes that led to nano-size grains with very high stored energy due to high dislocation density. The corresponding VH data showed significant hardening that correlated with estimated strengthening of ~1650 MPa. This hybrid processing approach combining high intensity ball milling of powder with annealing and forging showed the most promise for producing an oxide dispersing strengthened ferritic alloy.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Plasma enhanced atomic layer deposition and atomic layer etching of gallium oxide using trimethylgallium

Atomic layer etching driven by self-limiting thermal reactions has recently been developed as a highly conformal and isotropic technique for low damage atomic scale material removal by sequential exposures of vapor phase reactants. Gallium oxide (Ga2O3) is currently among the materials of interest due to a large variety of applications including power electronics, solar cells, gas sensors, and photon detectors. In this study, Ga2O3 was deposited by plasma enhanced atomic layer deposition using trimethylgallium [TMG, Ga(CH3)3] and O2 plasma at a substrate temperature of 200 °C. We report a newly developed method for Ga2O3 thermal atomic layer etching, in which surface modification is achieved through HF exposure resulting in a gallium fluoride surface layer, and then removed through volatile product formation via ligand exchange with TMG. Saturation of the precursor exposure at a substrate temperature of 300 °C resulted in an etch rate of 1.0 ± 0.1 Å/cycle for amorphous Ga2O3. Uniformity and conformality of the atomic layer etching process were confirmed via atomic force microscopy with a measured surface roughness of 0.55 ± 0.05 nm that remains unchanged after etching. The use of TMG for etching may expand available precursors for atomic layer etching processes, while allowing for both etching and deposition of Ga2O3 using the same metalorganic precursor.

Hatch, Kevin A. (ORCID:0000000283118623)↗
DOE OSTI2020

Carbon Dioxide Utilization for Plasma Nanosynthesis of Carbon

This DOE Phase I SBIR project has developed a glow discharge-based plasma process to convert carbon dioxide to sold carbon and water. By adding natural gas, the additional enthalpy can be used to reform the output carbon dioxide to value added carbon and EPA-compliance-grade water, thus creating a process that has no gaseous products at all, such as: CO 2 + CH 4 → 2C + 2H 2 O, which is simply the exothermic reverse of the syngas reaction. During the Phase I work, several milestones were accomplished successfully. a. First, a synthesis reactor was designed, assembled, and successfully operated using the combined simultaneous operation of glow discharge and microwaves. DC discharge and microwaves can also be operated individually, allowing multiple configurations to be used This is one of the first reactors of its kind, and perhaps the first ever. b. Second, the research team successfully produced carbon nanomaterials using carbon dioxide as the source of carbon via CO 2 + 2H 2 → C + 2H 2 O. This is certainly one of the first processes to use plasma to convert carbon dioxide to nanocarbon, and perhaps the first ever demonstration. c. Third, it was also shown that carbon monoxide and carbon dioxide can be used with methane to reduce the synthesis temperature of ASI graphene decorated carbon nanotubes (GDCNT). Hitherto GDCNT were only fabricated above 1200 °C. GDCNT was synthesized at 780 °C. CO 2 + C → 2CO; 2 CO + CH 4 → 3 C + 2H 2 O, and also, CH 4 + CO 2 → 2 C + 2H 2 O. d. Fourth, closed cycle synthesis of nanomaterial was demonstrated with over 80% conversion of carbon dioxide to carbon and water was achieved, on the basis of pressure drop during glow discharge. e. Fifth, plasma operation was achieved via glow discharge and microwaves at 500 Torr, demonstrating a path forward to atmospheric pressure operation f. Sixth, using carbon monoxide and carbon dioxide in an electrothermal furnace, we produced 350 grams per hour of high-quality nanotubes in a single furnace, compared to 200 grams per hour for the commercial process. Controlling the enthalpy prevents self-extinguishing hot gas pyrolysis. Thus, carbon dioxide enhances the properties and reduces the production cost. This is a near term advance that can go into trial production in the near term. g. Seventh, economic analysis suggests an economic plan forward, producing carbon nanotubes for less than $50 per pound. The use of hydrogen and carbon dioxide as the feedstocks is acceptable from a cost basis, and in fact hydrogen is less expensive than carbon monoxide. Niche applications are available in the near term, though quantities relevant to sequestration remain a far-term goal. h. Eighth, though it was not the research team’s intention to create a new process for producing carbon monoxide, it was realized that almost by accident we demonstrated plasma reforming of carbon dioxide via a plasma version of the reverse Boudouard reaction. Accordingly, we have contacted a major gas manufacturer (Matheson Gas) to determine whether there is interest in creating an industrial version of the process. i. Ninth, a long-range strategy is identified in which a progressively more carbon-conscious world will seek to create solid carbon as a means of sequestering carbon dioxide, impeding its return to the atmosphere. In the long term the price must drop by orders of magnitude with larger production, and assuming success, solid carbon could be the preferred form for sequestration rather than underground storage. If carbon can be made as cheaply as dirt, or nearly so, then it can serve a useful purpose as structural material for housing, soil amendments in agriculture and fillers to modify low areas.

03 NATURAL GAS↗
DOE OSTI2020

The effect of submicron grain size on thermal stability and mechanical properties of high-entropy carbide ceramics

(Hf 0.2 Zr 0.2 Ta 0.2 Nb 0.2 Ti 0.2 )C high-entropy ceramics (HEC) with a submicron grain size of 400 to 600 nm were fabricated by spark plasma sintering using a two-step sintering process. Both X-ray and neutron diffractions confirmed the formation of single-phase with rock salt structure in the as-fabricated (Hf 0.2 Zr 0.2 Ta 0.2 Nb 0.2 Ti 0.2 )C samples. The effect of submicron grain size on the thermal stability and mechanical properties of HEC was investigated. The grain growth kinetics in the fine-grained HEC was small at 1300 and 1600°C, suggesting high thermal stability that was possibly related to the compositional complexity and sluggish diffusion in HEC. Compared to the coarse-grain HEC with a grain size of 16.5 µm, the bending strength and fracture toughness of fine-grained HEC were 25% and 20% higher respectively. The improvement of mechanical properties in fine-grained HEC may be attributed to micromechanistic mechanisms such as crack deflection.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effect of Helium Flux on Near-surface Helium Accumulation in Plasma-Exposed Tungsten

We report results of object kinetic Monte Carlo (OKMC) simulations aimed at understanding the effect of helium flux on the near-surface helium accumulation in plasma-facing tungsten, which is initially defect-free and has a W(100) surface orientation. These OKMC simulations are performed at 933 K for fluxes ranging from 10 22 to 4 × 10 25 He/m 2 s, with 100 eV helium atoms impinging on a W(100) surface up to a maximum fluence of 4×10 19 He/m 2 . In the near-surface region, helium clusters interact elastically with the free surface. The interaction is attractive and results in the drift of mobile helium clusters towards the surface as well as increased trap mutation rates. The associated kinetics and energetics of the above-mentioned processes obtained from molecular dynamics simulations are also considered. The OKMC simulations indicate that as the flux decreases, the retention of implanted helium decreases, and its depth distribution shifts to deeper below the surface in initially pristine tungsten. Furthermore, the fraction of retained helium diffusing into the bulk increases as well, so much so that for 10 22 He/m 2 s, almost all of the retained helium diffused into the bulk with minimal/negligible near-surface helium accumulation. At a given flux, with increasing fluence, the fraction of retained helium initially decreases and then starts to increase after reaching a minimum. The occurrence of the retention minimum shifts to higher fluences as the flux decreases. Although the near-surface helium accumulation spreads deeper into the material with decreasing flux and increasing fluence, the spread appears to saturate at depths between 80 and 100 nm. Finally, we present a detailed analysis of the influence of helium flux on the size and depth distribution of total helium and helium bubbles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Advanced nanoscale characterization of aluminum nanoparticles with modified surface morphology via atmospheric helium and carbon monoxide plasmas

Aluminum nanoparticles (nAl) have the potential as energetic additives in explosive/propellant formulations. Scalable methodologies must be pursued to mitigate the inactive amorphous alumina shell surrounding the active aluminum (Al) core with modified surface morphology and chemistry for increased combustion effects. This work explores the feasibility of making reactive core/shell nAl with thinned oxide shells and modified surface coatings via a two-step atmospheric plasma surface treatment process in a custom dielectric barrier discharge plasma reactor. The commercial nAl of nominal average size similar to 40-60nm was first treated with helium (He) followed by He/carbon monoxide (CO) plasmas for different durations. The resultant samples were characterized via high-resolution transmission electron microscopy (HRTEM) and Fourier transform IR (FTIR) spectra. HRTEM images revealed sporadic patchy gamma -alumina deposits on particle surfaces and in gaps among particles for all samples, suggesting the non-uniform plasma effects of the He/CO glow. Nanoscale chemical analyses via scanning transmission electron microscopy elemental mapping and x-ray energy dispersive spectroscopy were further performed. Although no carbon-associated structure appeared in electron energy loss spectroscopy (EELS) spectra, the presence of carbonaceous materials was confirmed as a thin dispersive layer evenly distributed on the nAl surface suggesting either its amorphous nature or is present at a level insufficient to generate satisfactory EELS spectra. The trend of intensity profiles for key elements acquired by drawing lines across a single particle on the elemental maps confirmed that carbonaceous materials only existed on the surface and they were most likely carboxylates that increased with increased He/CO treatment duration, as evident by FTIR results. Finally, this work demonstrated the success of atmospheric plasma-treated reactive nAl with comprehensively characterized surface features via advanced microscopy and spectroscopy.

36 MATERIALS SCIENCE↗