Search NASA⌕ Search

SEARCH · Search NASA

Results for “Precision measurements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

Speckle Interferometry at the Blanco and SOAR Telescopes in 2008 and 2009

The results of speckle interferometric measurements of binary and multiple stars conducted in 2008 and 2009 at the Blanco and Southern Astrophysical Research (SOAR) 4 m telescopes in Chile are presented. A tot al of 1898 measurements of 1189 resolved pairs or sub-systems and 394 observations of 285 un-resolved targets are listed. We resolved for the first time 48 new pairs, 21 of which are new sub-systems in close visual multiple stars. Typical internal measurement precision is 0.3 mas in both coordinates, typical companion detection capability is delta m approximately 4.2 at 0.15 degree separation. These data were obtained with a new electron-multiplication CCD camera; data processing is described in detail, including estimation of magnitude difference, observational errors, detection limits, and analysis of artifacts. We comment on some newly discovered pairs and objects of special interest.

TRIPLE STARS↗
NASA NTRS2011

Measurement of CPAS Main Parachute Rate of Descent

The Crew Exploration Vehicle Parachute Assembly System (CPAS) is being designed to land the Orion Crew Module (CM) at a safe rate of descent at splashdown. Flight test performance must be measured to a high degree of accuracy to ensure this requirement is met with the most efficient design possible. Although the design includes three CPAS Main parachutes, the requirement is that the system must not exceed 33 ft/s under two Main parachutes, should one of the Main parachutes fail. Therefore, several tests were conducted with clusters of two Mains. All of the steady-state rate of descent data are normalized to standard sea level conditions and checked against the limit. As the Orion design gains weight, the system is approaching this limit to within measurement precision. Parachute "breathing," cluster interactions, and atmospheric anomalies can cause the rate of descent to vary widely and lead to challenges in characterizing parachute terminal performance. An early test had contradictory rate of descent results from optical trajectory and Differential Global Positioning Systems (DGPS). A thorough analysis of the data sources and error propagation was conducted to determine the uncertainty in the trajectory. It was discovered that the Time Space Position Information (TSPI) from the optical tracking provided accurate position data. However, the velocity from TPSI must be computed via numerical differentiation, which is prone to large error. DGPS obtains position through pseudo-range calculations from multiple satellites and velocity through Doppler shift of the carrier frequency. Because the velocity from DGPS is a direct measurement, it is more accurate than TSPI velocity. To remedy the situation, a commercial off-the-shelf product that combines GPS and an Inertial Measurement Unit (IMU) was purchased to significantly improve rate of descent measurements. This had the added benefit of solving GPS dropouts during aircraft extraction. Statistical probability distributions for CPAS Main parachute rate of descent and drag coefficient were computed and plotted. Using test data, a terminal rate of descent at splashdown can be estimated as a function of canopy loading.

Ray, Eric S.↗
NASA NTRS2021

ICESat-2 Constraint Analysis and Monitoring System (CAMS)

The Ice, Cloud and land Elevation Satellite-2 was launched on 15 September 2018 with mission goals of collecting surface elevation data that can precisely measure ice sheet topography, cloud and aerosol heights, land topography, as well as vegetation height for ecosystems studies. The Constraint Analysis and Monitoring System (CAMS) was implemented as an ICESat-2 ground system element to perform Mission Planning and Spacecraft Safety Monitoring. Mission Planning requires CAMS to serve as an interface between the Project Science Office, the Instrument Support Facility and the Mission Operation Control Center. By ingesting inputs received from all three groups, the CAMS builds an optimized and deconflicted timeline of science and instrument activities. Based upon the timeline of activities, the CAMS utilizes a sophisticated set of algorithms to model and predict the location and pointing of the spacecraft instrument relative to the Earth and Sun. From the predicted position and pointing, the CAMS provides precise monitoring of instrument health, and performs space asset laser conjunction detection. Furthermore, the CAMS determines alternative plans to prevent detected health constraint violations or mitigate potential laser conjunctions. This paper provides an overview of the CAMS and presents the operational performance of planning science and instrument activities, the monitoring of instrument constraints for health and safety, and the space asset laser conjunction screening and mitigation process.

ICESat-2↗
NASA NTRSDate not supplied

Towards A Better Measurement of eta-Earth and Beyond Via Modernizing the Kepler Pipeline: An Update

The measurement of the occurrence of rocky habitable-zone planets orbiting Sun-like stars (eta-Earth), is a fundamental quantity for guiding our search for habitable exoplanets. Despite being launched 15 years ago, NASA’s Kepler mission remains responsible for finding the majority of all known exoplanet candidates relevant to eta-Earth, ushering in a new era of exoplanet demographics studies and continuing to drive planet occurrence rate calculations. However, the paucity of detections of likely rocky planets in the habitable zones of their host stars remains a limiting factor for estimating eta-Earth. We describe our five-year project for modernizing the Kepler planet detection and vetting pipeline in order to produce a more complete and reliable exoplanet catalog, which will lead to more accurate and precise measurements of eta-Earth. First, we are currently porting the original Kepler pipeline code from MATLAB to Python. We will then describe new stellar catalogs based on Gaia and ground-based imaging data, and ways to improve the pipeline detection and vetting algorithms. We will provide an update on the current state of this work. When completed, we will use this new pipeline and catalog to calculate updated estimates of eta-Earth. The full, updated pipeline code in Python, as well as all our inputs and results, will be made available to the public for detailed exoplanet occurrence-rate and demographics studies.

kepler↗
NASA NTRS1999

Cosmic Journeys. To the Edge of Gravity, Space and Time: Structure and Evolution of the Universe Roadmap: 2003-2023

The Roadmap for the Structure and Evolution of the Universe (SEU) Theme embraces three fundamental, scientific quests: (1) To explain structure in the Universe and forecast our cosmic destiny, (2) To explore the cycles of matter and energy in the evolving Universe, (3) To examine the ultimate limits of gravity and energy in the Universe. We develop these quests into six focused research campaigns: (1) Identify dark matter and learn how it shapes galaxies and systems of galaxies, (2) Explore where and when the chemical elements were made (3) Understand the cycles in which matter, energy, and magnetic field are exchanged between stars and the gas between stars, (4) Discover how gas flows in disks and how cosmic jets are formed, (5) Identify the sources of gamma-ray bursts and high-energy cosmic rays, (6) Measure how strong gravity operates near black holes and how it affects the early Universe. These campaigns lead to a portfolio of future major missions of great scientific interest and popular appeal, strongly endorsed by the scientific community. Many have undergone significant initial study. Some are in a state of readiness that make them ideal candidates for the present Office of Space Science Strategic Plan; others may well feature in the next Plan. Each provides a golden scientific opportunity to advance our understanding of the Universe. We have identified three top-priority near-term science objectives together with missions to accomplish these goals. The three problems span a diverse range of subdisciplines, of observational technique, of timescales, and of cost, and are thus complementary, forming a coherent core program for the SEU theme in the 2003-2007 timeframe.These are : (1) Obtain precise measures of the chemical composition and physical conditions in objects ranging from the closest stars to the most distant quasars, (2) Utilize gravitational radiation as a probe of supermassive blackholes throughout the universe, (3) determine the nature of the highest energy cosmic rays. We also describe a small number of exciting missions which are strong candidates for new start status in the midterm, 2008-2013, pending technology development. These missions tackle fundamental problems through the entire electromagnetic spectrum, from the radio through gamma rays, and in many cases develop fascinating technologies with applicability not only elsewhere in NASA but outside of space science as well. Finally, we describe a set of "vision missions," which stretch our scientific imagination and set technology challenges for our field.

Source record↗
NASA NTRS2017

Drag-Free Control and Drag Force Recovery of Small Satellites

Drag-free satellites provide autonomous precision orbit determination, accurately map the static and time varying components of Earth's mass distribution, aid in our understanding of the fundamental force of gravity, and will ultimately open up a new window to our universe through the detection and observation of gravitational waves. At the heart of this technology is a gravitational reference sensor, which (a) contains and shields a free-floating proof mass from all non-gravitational forces, and (b) precisely measures the position of the test mass inside the sensor. Thus, both test mass and spacecraft follow a pure geodesic in spacetime. By tracking the position of a low Earth orbiting drag-free satellite we can directly determine the detailed shape of geodesics and through analysis, the higher order harmonics of the Earths geopotential. This paper explores two different drag-free control systems on small satellites. The first drag-free control system is a continuously compensated single thruster 3-unit CubeSat with a suspension-free spherical proof-mass. A feedback control system commands the thruster and Attitude and Determination Control System to fly the tender spacecraft with respect to the test mass. The spheres position is sensed with a LED-based differential optical shadow sensor, its electric charge controlled by photoemission using UV LEDs, and the spacecraft position is maintained with respect to the sphere using an ion electrospray propulsion system. This configuration is the most fuel-efficient drag-free system possible today. The second drag-free control system is an electro-statically suspended cubical proof-mass that is operated with a low duty cycle, limiting suspension force noise over brief, known time intervals on a small GRACE-II -like satellite. The readout is performed using a laser interferometer, which is immune to the dynamic range limitations of voltage references. This system eliminates the need for a thruster, enabling drag-free control systems for passive satellites. In both cases, the test mass position, GPS tracking data, and commanded actuation, either thrust or suspension system, can be analyzed to estimate the 3-axis drag forces acting on the satellite. The data produces the most precise maps of upper atmospheric drag forces and with additional information, detailed models that describe the dynamics of the upper atmosphere and its impact on all satellites that orbit the Earth. This paper highlights the history, applications, design, laboratory technology development and highly detailed simulation results of each control system.

Small Satellites↗
NASA NTRS1959

Global Aspects of the Exploration of Space

The interest of man in outer space began long ago among uncivilized peoples to whom the face of the sky was clock and almanac; the celestial bodies, objects of worship. Exploration was at first by visual observation, later aided by armillary spheres and quadrants, and still later by more precise measuring instruments, telescopes, and spectroscopes. The information obtained was that borne by the light that was transmitted from the distant celestial object through the atmosphere to the observing instrument on the ground. In recent years the light waves have been supplemented by radio waves as carriers of information from the stars and planets. Men of many nations have contributed through the centuries to the exploration of space by the methods of astronomy. The history of advances in astronomical knowledge and technique includes the records of Chinese, Babylonians, Greeks, Arabians, and of nearly every nation of the modern world. International cooperation was early recognized as essential and beneficial; the countless number of the stars and the vastness of space present mankind with a truly global task. The picture of the universe obtained by the astronomers early stirred the imagination of men to speculate about the existence of life elsewhere in the universe, about means of communication with distant stars, and in the last centuries about the possibility of the travel of man to the moon and planets. Some sought to apply the science and engineering of their day to describe the vehicles to be used. For example, Jules Verne published in 1865 in "From the Earth to the Moon" a description of a gun-launched projectile carrying passengers to orbit the moon. Today we have taken the first steps to bring this inspired vision to reality. The exploration of space by unmanned vehicles carrying scientific apparatus began on October 4, 1957; exploration by man will follow in due course.

Dryden, Hugh L.↗
NASA NTRS1969

Data compression with bounded errors.

Data compression from standpoint of epsilon entropy theory, considering precise measure of channel capacity necessary to describe data source

Posner, E. C.↗
NASA NTRS1970

Smoothed thermocouple tables of extended significance, volume 1

Although thermocouple calibration tables of emf (mv abs) vs temperature usually have enough significant digits for many purposes, the rounding errors often limit the use of these tables (and hence thermocouples) for precise measurements of temperature related effects such as thermal conductivity or specific heat. Fourteen calibration tables for common thermocouples from NBS Circular 561 and for cryogenic thermocouples from NBS Report 9712 were smoothed, and these are given in vol. 2 of this report. In this volume (vol.1), a general discussion of data smoothing techniques and a description of the procedures by which the smoothed tables were prepared are given.

Thermocouples↗
NASA NTRS1970

Optical research facilities

Optical collimator for precision measurements in design, fabrication, and evaluation of systems and components

Pershing, W. R.↗
NASA NTRS1971

Conductive elastomeric extensometer

Bridge circuit, in which conductive elastomeric material is the variable leg, precisely measures surface area changes in the human body. Circuits are used singularly, or in quantity by adding elements and amplifier circuits. Elastomeric strips can be located in a form-fitting garment.

Gause, F. L.↗
NASA NTRS1971

Thermophysical property data and safety information

Precision measurements of the properties of oxygen over a wide range of temperature and pressure are complete. The primary remaining effort, which is in progress, is the representation of these data in the most usable format such as tables, equations, diagrams, and computer programs. In addition, safety data are essential to proper design, operation, and failure analysis. All of the available information on oxygen safety is being reviewed, evaluated and indexed for quick retrieval through the NASA Aerospace Safety Research and Data Institute program. The availability of data, where the major gaps in data occur, and retrieval of bibliographic information are discussed.

Kropschot, R. H.↗
NASA NTRS1971

Laser altimeter for Apollo lunar orbit.

The function of the altimeter is to provide precise measurements of Apollo vehicle height above known positions on the lunar surface. A short duration light pulse from the laser is directed through a telescope in a narrow beam to the lunar surface. A portion of the light is reflected by the moon back to the altimeter where it is intercepted by a receiving telescope and relayed to a detector. The time from the moment when the light pulse leaves the laser until its return, which is measured with the aid of a quartz crystal controlled clock oscillator, is a measure for the altitude.

Woodward, J. H.↗