Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pulse Wave”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Dynamics of HCN, HNC, and HNCO Formation in the 193 nm Photodissociation of Formamide

Formamide (NH 2 CHO) is the simplest molecule containing a peptide linkage [-NH-C($=$O)-], and it plays an essential role in the study of prebiotic chemistry. Exposure to UV irradiation allows formamide to decompose and act as a prebiotic feedstock in the formation of nucleobases and other necessary starting materials. The photodissociation mechanism of gaseous formamide at 193 nm is studied using (a) chirped-pulse Fourier transform millimeter-wave spectroscopy in the 260-290 GHz spectral region in a room-temperature flow-tube reactor at 1 mu bar pressure, (b) a combination of electronic structure theory, transition state theory, and quasiclassical trajectories, and (c) the Active Thermochemical Tables. The HCN and HNC photoproducts of hydrogenated (NH 2 CHO) and deuterated (NH 2 CDO and ND 2 CHO) formamide precursors are examined to gain insight into the photodissociation mechanism. Here, the theoretical investigation has characterized the main pathway leading to each of the HCN/HNC isomers from the precursor isotopologues. The theoretical branching ratio [HNC]/[HCN] = 2.1 for nascent photofragments agrees with the experiment. The effect of the postphotolysis HNC ↔ HCN isomerization on the [HNC]/[HCN] ratio is predicted. We report the experimental branching ratio [HNCO]: ([HNC] + [HCN]) = 12 ± 3 and propose that most of HNCO originates from dissociation on the S-1 electronic state of formamide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Thermally Initiated Formation of Criegee Intermediate CH 2 OO in the Oxidation of Ethane

Criegee intermediates (CIs) play an important role in atmospheric chemistry as a transient source of the OH radical through their formation by the ozonolysis of unsaturated organic compounds. Here, we report thermally initiated formation of the smallest CI (CH 2 OO) in the oxidation of ethane (CH 3 CH 3 ) that may be relevant to combustion and flames. The SiO 2 /SiC oxidation microreactor is heated to 1800 K and has a short residence time of ∼100 μs. The CH 2 OO we observe is likely formed in a lower-temperature region near the microreactor’s exit. Plausible mechanisms for CH 2 OO formation and retention under these conditions mediated by methylperoxy (CH 3 OO) radicals are discussed. Pure rotational spectra of CH 2 OO and other intermediates (HO 2 , CH 3 CHO, CH 2 CHOH, c-CH 2 OCH 2 , CH 3 CH 2 CHO, CH 3 OOH, and HCOOH) are detected with a chirped-pulse Fourier transform millimeter-wave spectrometer operating in the frequency range of 60–90 GHz. In conclusion, detection occurs in a molecular beam, where the species are supersonically cooled to 5 K.

Hydrocarbons↗
DOE OSTI2021

Table-Top High Photon Energy Sources for Chemical Dynamics Investigations

Time-resolved spectroscopies using high-energy photons in the vacuum ultraviolet (VUV) to the X-ray region of the electromagnetic spectrum, have proven to be powerful probes of chemical dynamics. These high-energy photons can access valence and core orbitals of molecules and materials, providing key information on molecular and electronic structure and their time evolution. This report details the development of table-top sources of extreme ultraviolet (XUV) and VUV pulses at Sandia National Laboratories for use in studies of gas phase chemical dynamics. Femtosecond duration XUV pulses are produced using laser-driven high harmonic generation and their detected range span ~40-140 eV photon energies. These pulses are used in conjunction with ultraviolet pulses in a pump-probe scheme to study excited state dynamics of gas phase molecules. VUV pulses at 7.75 eV are generated using a four-wave-mixing scheme driven by 800 nm and 266 nm pulses in an argon-filled hollow-core fiber.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

The Fermilab Facility for Dark Matter Discovery (F2D2): A Conceptual PIP-II Beam Stop Facility for Dark Sector Physics

What do the accelerator target stations of the next decade look like? The NuMI beamline, fed by Fermilab s Main Injector, recently exceeded 1 MW beam power. Future experiments fed by the PIP-II superconducting linear accelerator might demand upwards of 2 MW in continuous-wave mode, compared to the pulsed beams typical of neutrino experiments. Looking further into the future, the Muon Collider front end includes a target station with even higher power 5 MW or beyond. How do we build a 2+ MW target facility? How does a high-power, low-energy, CW beam affect target design compared to conventional high-energy neutrino targets? How do we manage radiation and heat? How is the facility serviced? What is the current state of capability, and what technologies do we need to develop? These questions are answered in the context of F2D2, a conceptual target station design for dark sector physics experiments using beam from PIP-II.

Williams, Jonathan K.↗
DOE OSTI2026

Probing Attosecond Bound Electron Dynamics Driven by Strong-Field Light Transients

The project aimed to drive strong-field excitation of bound electronic coherences in gas-phase atoms and molecules using a novel source of near-single-cycle optical field transients, based on industrial-grade Yb:solid-state laser technology. Key objectives included generating near-single cycle field transients and isolated attosecond pulses, reconstructing time-dependent wave packets in atoms and molecules, probing their decoherence using attosecond interferometry, and controlling the dynamic evolution of systems on attosecond to few-femtosecond timescales. A secondary goal of the project was to develop field-resolved measurement platforms as a novel approach for studying electron dynamics in atomic and molecular systems.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS1976

The nonlinear transient response of thin, rectangular elastic plates

The results of experiments and theoretical analysis of the nonlinear, transient response of thin, rectangular, elastic, simply supported plates are presented. In the experiments, a plane wave tube with a special pulse generator at one end and a thin glass plate mounted at the other end was used to subject the glass plate to pressure pulses of different magnitudes. Whole-field measurements of the response of the plate were obtained by the reflected moire grid technique. The largest ratio of center deflection to thickness of the plate during the experiments was 5.6. The theoretical response of the glass plate to the pressure pulses was computed by solving the von Karman equations governing large deflections in elastic plates by two methods - (1) the finite-difference method, and (2) Galerkin's method. Good agreement was found between theoretically predicted and experimentally measured response.

Rajagopal, G.↗
NASA NTRS1979

Development of tunable high pressure CO2 laser for lidar measurements of pollutants and wind velocities, January 1976 to December 1977

A tunable multiatmospheric pulsed CO2 laser with emphasis on experimental features and supporting theoretical analyses important to differential absorption lidar and Doppler lidar measurement of pollutants and wind velocities is reported. The energy deposition and the means to produce the uniform high density plasma in the multiatmospheric medium, through UV preionization of an organic seed gas is discussed. Design features of the pulsed CO2 laser are presented. The radiative processes which are operative and prevent the laser from breaking into oscillations in a large number of modes over its broad amplification bandwidth are described. The mode competition for the transient pulsed laser oscillation in a standing wave and traveling wave ring laser configuration is discussed and contrasted with the approach to steady state oscillations. The latter findings are important to transient injection locking for production of a highly stable pulsed CO2 laser output.

Javan, A.↗
NASA NTRS1979

Signal-to-noise ratio for acoustic detection in the deep ocean

A simple method is presented for studying the thermoacoustic wave generated by a heat pulse. The signal-to-noise ratio (S/N) is then calculated for a typical hadronic-electromagnetic cascade in the deep ocean where low frequencies are masked by surface noise. It is found that a maximum useful range of about 16 km is found for typical conditions at 5 km depth. It is shown that in order to obtain useful signals with S/N greater than 100 at distances of 1 to 16 km, the cascade energy must be 10 to the 16th to 10 to the 18th eV. Finally, attention is given to further refinements of the theory of acoustic detection which remain to be investigated.

Bowen, T.↗
NASA NTRS1981

Acousto-ultrasonic characterization of fiber reinforced composites

The acousto-ultrasonic technique combines advantageous aspects of acoustic emission and ultrasonic methodologies. Acousto-ultrasonics operates by introducing a repeating series of ultrasonic pulses into a material. The waves introduced simulate the spontaneous stress waves that would arise if the material were put under stress as in the case of acoustic emission measurements. These benign stress waves are detected by an acoustic emission sensor. The physical arrangement of the ultrasonic (input) transducer and acoustic emission (output) sensor is such that the resultant waveform carries an imprint of morphological factors that govern or contribute to material performance. The output waveform is complex, but it can be quantitized in terms of a 'stress wave factor.' The stress wave factor, which can be defined in a number of ways, is a relative measure of the efficiency of energy dissipation in a material. If flaws or other material anomalies exist in the volume being examined, their combined effect appears in the stress wave factor.

Vary, A.↗
NASA NTRS1981

Acousto-ultrasonic characterization of fiber reinforced composites

The acousto-ultrasonic technique combines advantageous aspects of acoustic emission and ultrasonic methodologies. Acousto-ultrasonics operates by introducing a repeating series of ultrasonic pulses into a material. The waves introduced simulate the spontaneous stress waves that would arise if the material were put under stress as in the case of acoustic emission measurements. These benign stress waves are detected by an acoustic emission sensor. The physical arrangement of the ultrasonic (input) transducer and acoustic emission (output) sensor is such that the resultant waveform carries an imprint of morphological factors that govern or contribute to material performance. The output waveform is quite complex, but it can be quantitized in terms of a 'stress wave factor'. The stress wave factor, which can be defined in a number of ways, is essentially a relative measure of the efficiency of energy dissipation in a material. If flaws or other material anomalies exist in the volume being examined, their combined effect will appear in the stress wave factor.

Vary, A.↗
NASA NTRS1981

Development of MBE grown Pb-salt semiconductor lasers for the 8.0 to 15.0 micrometer spectral region

Diodes lasers are fabricated using multiple source molecular beam expitaxial growth of (PbSn)Te on BaF2 substrates. Methods for crystal growth, crystal transfer, and device fabrication by photolithographic techniques were developed. The lasers operate in the spectra range from 10 microns to 14 microns and at temperatures from 12K to 60K continuous wave and to 95 K pulsed.

Miller, M. D.↗
NASA NTRS1982

Acousto-ultrasonic characterization of fiber reinforced composites

The advantageous aspects of acoustic emission and ultrasonic methodologies are combined in a technique which operates by introducing a repeating series of ultrasonic pulses into a material. The waves introduced simulate the spontaneous stress waves that would arise if the material were put under stress as in the case of acoustic emission measurements. These benign stress waves are detected by an acoustic emission sensor. The physical arrangement of the ultrasonic (input) transducer and acoustic emission (output) sensor is such that the resultant waveform carries an imprint of morphological factors that govern or contribute to material performance. The output waveform is quite complex, but it can be quantitized in terms of a "stress wave factor". The stress wave factor, which can be defined in a number of ways, is essentially a relative measure of the efficiency of energy dissipation in a material. If flaws or other material anomalies exist in the volume being examined, their combined effect will appear in the stress wave factor.

Vary, A.↗
NASA NTRS1982

Atomic clocks for astrophysical measurements

It is noted that recently developed atomic hydrogen masers have achieved stability well into the 10 to the -16th domain for averaging time intervals beyond 1000 sec and that further improvements are in prospect. These devices are highly adaptable for space use in very high precision measurements of angle through Very Long Baseline Interferometry (VLBI) and of range and range-rate through Doppler techniques. Space missions that will use these clocks for measuring the sun's gravity field distribution and for testing gravitation and relativity (a project that will include a search for pulsed low-frequency gravitational waves) are discussed. Estimates are made of system performance capability, and the accuracy capability of relativistic measurements is evaluated in terms of the results from the 1976 NASA/SAO spaceborne clock test of the Einstein Equivalence Principle.

Vessot, R. F. C.↗
NASA NTRS1985

Aerial laser sensing of ocean upper layer

Applications of laser sensing of the ocean, such as deep bathymetry; determination of the luminescence spectrum of phytoplankton as a sensitive indicator of changes in the external physical parameters of the studied region; monitoring the state of underwater pipelines; conducting search and rescue missions; monitoring pollution; biological observations of the state of algae; searching for schools of fish, etc., are discussed. The Chayka apparatus for laser sensing is discussed. A block diagram is given which is used in describing functioning of this unit. Particular attention is given to the time structure of an echo signal appearing when sensing the upper ocean layer by a short laser pulse propagating through the wave-covered surface.

Vlasov, D. V.↗
NASA NTRS1990

p-mode absorption in the giant active region of 10 March, 1989

The interaction of solar p-mode oscillations with solar active regions has been studied in the case of the velocity oscillations observed in the vicinity of NOAA region 5359 on March 10, 1989. A maximum of nearly 70 percent of the power of incident high-degree modes is noted to be absorbed by this exceptionally large sunspot group. The occurrence of a major flare within this region during the observing sequence furnished a unique opportunity for testing the hypothesis that flares can excite photospheric acoustic waves. A search for acoustic 'pulses' emanating from the flare leads no detection of pulses, to a level of about 20 percent of the background power.

Braun, D. C.↗
NASA NTRS1991

Aerosol backscatter measurements at 10.6 microns with airborne and ground-based CO2 Doppler lidars over the Colorado High Plains. II - Backscatter structure

Measurements of tropospheric aerosol volume backscatter coefficients at 10.6-microns wavelength were obtained with airborne continuous wave and ground-based pulsed CO2 Doppler lidars over the Colorado High Plains during a 20-day period in summer 1982. A persistent 'background' layer was found between 6- and 10-km altitude, with a generally uniform backscatter mixing ratio of about 10 to the -10th sq m/kg per sr. The upper boundary of this background layer varied with the tropopause height; the lower boundary varied with the strength and diurnal cycle of convective mixing in the planetary boundary layer (PBL). For quiescent meteorological conditions, the transition from the PBL to the background layer was usually very sharp, with backscatter decreases sometimes as large as 3 decades in about 70 m. Sharp gradients were also found at the boundaries of shallow (tens of meters) subvisible cirrus clouds. For less stable conditions, associated with vertical aerosol transport by deep cumuliform clouds, backscatter tended to decrease exponentially with altitude.

Bowdle, David A.↗
NASA NTRS1992

Alfvenically driven slow shocks in the solar chromosphere and corona

The nonlinear evolution of an Alfvenic impulse launched from the photosphere and its dynamical effects on the chromosphere, transition region (TR), and corona are investigated using a simple 1D model. It is found that the leading edge of the torsional pulse can steepen into a fast shock in the chromosphere if the pulse is of sufficiently large amplitude and short duration. A slow shock which develops behind the Alfvenic pulse can reflect downgoing Alfven waves back up to the corona. The upgoing reflected wave can induce a significant upward ejection of the TR. Nonlinear dynamics are found to lead to very impulsive behavior at later times. It is suggested that impulsive events occurring in the TR or corona need not be interpreted in terms of reconnection-driven microflares. It is also found that B(0) in the chromosphere can be amplified when the TR and chromosphere fall.

Hollweg, Joseph V.↗