Search NASA⌕ Search

SEARCH · Search NASA

Results for “RESISTANCE DEVICE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Resistive switching and synaptic properties of fully atomic layer deposition grown TiN/HfO{sub 2}/TiN devices

Recently proposed novel neural network hardware designs imply the use of memristors as electronic synapses in 3D cross-bar architecture. Atomic layer deposition (ALD) is the most feasible technique to fabricate such arrays. In this work, we present the results of the detailed investigation of the gradual resistive switching (memristive) effect in nanometer thick fully ALD grown TiN/HfO{sub 2}/TiN stacks. The modelling of the I-V curves confirms interface limited trap-assisted-tunneling mechanism along the oxygen vacancies in HfO{sub 2} in all conduction states. The resistivity of the stack is found to critically depend upon the distance from the interface to the first trap in HfO{sub 2}. The memristive properties of ALD grown TiN/HfO{sub 2}/TiN devices are correlated with the demonstrated neuromorphic functionalities, such as long-term potentiation/depression and spike-timing dependent plasticity, thus indicating their potential as electronic synapses in neuromorphic hardware.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron-phonon interaction and thermal boundary resistance at the crystal-amorphous interface of the phase change compound GeTe

Phonon dispersion relations and electron-phonon coupling of hole-doped trigonal GeTe have been computed by density functional perturbation theory. This compound is a prototypical phase change material of interest for applications in phase change non-volatile memories. The calculations allowed us to estimate the electron-phonon contribution to the thermal boundary resistance at the interface between the crystalline and amorphous phases present in the device. The lattice contribution to the thermal boundary resistance has been computed by non-equilibrium molecular dynamics simulations with an interatomic potential based on a neural network scheme. We find that the electron-phonon term contributes to the thermal boundary resistance to an extent which is strongly dependent on the concentration and mobility of the holes. Further, for measured values of the holes concentration and electrical conductivity, the electron-phonon term is larger than the contribution from the lattice. It is also shown that the presence of Ge vacancies, responsible for the p-type degenerate character of the semiconductor, strongly affects the lattice thermal conductivity of the crystal.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Lithium battery management system

Provided is a system for managing a lithium battery system having a plurality of cells. The battery system comprises a variable-resistance element electrically connected to a cell and located proximate a portion of the cell; and a device for determining, utilizing the variable-resistance element, whether the temperature of the cell has exceeded a predetermined threshold. A method of managing the temperature of a lithium battery system is also included.

25 ENERGY STORAGE↗

Ultra-high performance wearable thermoelectric coolers with less materials

Thermoelectric coolers are attracting significant attention for replacing age-old cooling and refrigeration devices. Localized cooling by wearable thermoelectric coolers will decrease the usage of traditional systems, thereby reducing global warming and providing savings on energy costs. Since human skin as well as ambient air is a poor conductor of heat, wearable thermoelectric coolers operate under huge thermally resistive environment. The external thermal resistances greatly influence thermoelectric material behavior, device design, and device performance, which presents a fundamental challenge in achieving high efficiency for on-body applications. Here, we examine the combined effect of heat source/sink thermal resistances and thermoelectric material properties on thermoelectric cooler performance. Efficient thermoelectric coolers demonstrated here can cool the human skin up to 8.2 °C below the ambient temperature (170% higher cooling than commercial modules). Cost-benefit analysis shows that cooling over material volume for our optimized thermoelectric cooler is 500% higher than that of the commercial modules.

36 MATERIALS SCIENCE↗

Conformational Domain Wall Switch

Domain walls in ferroelectric materials have tantalizing potential in disruptive memory and reconfigurable nanoelectronics technologies. Here, a ferroelectric domain wall switch with three distinct addressable resistance states is demonstrated. The device operation hinges on fully controllable and reversible conformational changes of the domain wall. As validated by atomistic simulations consistent with the experiments, using electric field, the shape—and hence the charge state—of the domain wall and ultimately its conduction are altered. Sequential nanoscale transitions of the walls are visualized directly using stroboscopic-piezoresponse force microscopy and Kelvin probe microscopy. In this work, anisotropic head-to-head domain wall injection, stabilized by the majority carrier type of the ferroelectric, BiFeO 3 , is identified as the key factor that enables conformational control.

36 MATERIALS SCIENCE↗

Spectroscopic Studies on the Metal-Insulator Transition Mechanism in Correlated Materials

Here, the metal–insulator transition (MIT) in correlated materials is a novel phenomenon that accompanies a large change in resistivity, often many orders of magnitude. It is important in its own right but its switching behavior in resistivity can be useful for device applications. From the material physics point of view, the starting point of the research on the MIT should be to understand the microscopic mechanism. Here, an overview of recent efforts to unravel the microscopic mechanisms for various types of MITs in correlated materials is provided. Research has focused on transition metal oxides (TMOs), but transition metal chalcogenides have also been studied. Along the way, a new class of MIT materials is discovered, the so–called relativistic Mott insulators in 5d TMOs. Distortions in the MO 6 (M = transition metal) octahedron are found to have a large and peculiar effect on the band structure in an orbital dependent way, possibly paving a way to the orbital selective Mott transition. In the final section, the character of the materials suitable for applications is summarized, followed by a brief discussion of some of the efforts to control MITs in correlated materials, including a dynamical approach using light.

36 MATERIALS SCIENCE↗

Controlled Growth of Single‐Crystal Graphene Wafers on Twin‐Boundary‐Free Cu(111) Substrates

Single-crystal graphene (SCG) wafers are needed to enable mass-electronics and optoelectronics owing to their excellent properties and compatibility with silicon-based technology. Controlled synthesis of high-quality SCG wafers can be done exploiting single-crystal Cu(111) substrates as epitaxial growth substrates recently. However, current Cu(111) films prepared by magnetron sputtering on single-crystal sapphire wafers still suffer from in-plane twin boundaries, which degrade the SCG chemical vapor deposition. Here, in this study, it is shown how to eliminate twin boundaries on Cu and achieve 4 in. Cu(111) wafers with ≈95% crystallinity. The introduction of a temperature gradient on Cu films with designed texture during annealing drives abnormal grain growth across the whole Cu wafer. In-plane twin boundaries are eliminated via migration of out-of-plane grain boundaries. SCG wafers grown on the resulting single-crystal Cu(111) substrates exhibit improved crystallinity with >97% aligned graphene domains. As-synthesized SCG wafers exhibit an average carrier mobility up to 7284 cm 2 V −1 s −1 at room temperature from 103 devices and a uniform sheet resistance with only 5% deviation in 4 in. region.

36 MATERIALS SCIENCE↗

Sulfurization Engineering of One–Step Low–Temperature MoS 2 and WS 2 Thin Films for Memristor Device Applications

2D materials have been of considerable interest as new materials for device applications. Non-volatile resistive switching applications of MoS 2 and WS 2 have been previously demonstrated; however, these applications are dramatically limited by high temperatures and extended times needed for the large-area synthesis of 2D materials on crystalline substrates. The experimental results demonstrate a one-step sulfurization method to synthesize MoS 2 and WS 2 at 550 °C in 15 min on sapphire wafers. Furthermore, a large area transfer of the synthesized thin films to SiO 2 /Si substrates is achieved. Following this, MoS 2 and WS 2 memristors are fabricated that exhibit stable non-volatile switching and a satisfactory large on/off current ratio (10 3 –10 5 ) with good uniformity. Tuning the sulfurization parameters (temperature and metal precursor thickness) is found to be a straightforward and effective strategy to improve the performance of the memristors. Furthermore, the demonstration of large-scale MoS 2 and WS 2 memristors with a one-step low-temperature sulfurization method with simple strategy to tuning can lead to potential applications such as flexible memory and neuromorphic computing.

36 MATERIALS SCIENCE↗

Controlling the crystallite size and influence of the film thickness on the optical and electrical characteristics of nanocrystalline Cu{sub 2}S films

Highlights: Black-Right-Pointing-Pointer Modification of the preparation technique in order to deposit nanostructure Cu{sub 2}S thin films. Black-Right-Pointing-Pointer Controlling the crystallite size of the prepared films. Black-Right-Pointing-Pointer Study the surface morphology, optical and electrical characteristics of Cu{sub 2}S films. -- Abstract: In this work, Cu{sub 2}S nanocrystalline films have been successfully prepared using dip-coating technique. The stoichiometry and the structural characteristics of the prepared films were characterized by energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD), respectively. The surface morphology of the deposited Cu{sub 2}S film was studied using both the scanning electron microscopy (SEM) and the atomic force microscopy (AFM). The SEM and AFM images indicate that the prepared Cu{sub 2}S films are characterized by a well-dispersed and highly dense with spherical like-shaped aggregates of size in the nano scale. The optical absorption measurements indicate that the Cu{sub 2}S nanoparticles have a direct band gap of 2.92 eV. The dispersion and absorption parameters such as the dispersion energy, oscillating energy, real and imaginary dielectric constants and dissipation factor were calculated within a wide wavelength range of the spectrum that indicates the suitability of the deposited films as solar absorber using this technique. The dark electrical resistivity ({rho}) measurements were carried out at different temperatures in the range 312-440 K. These results confirm the semiconducting characteristic of the prepared Cu{sub 2}S films. Moreover, two activation energies were obtained that indicate the presence of two dominating conduction mechanisms in these temperature ranges. The bulk electrical resistivity ({rho}{sub B}) and the mean free path (l{sub 0}) of charge carriers were estimated from the resistivity-thickness dependence. The heterojunction device of n-ZnCdS/p-Cu{sub 2}S behaves good rectifying property. The photovoltaic characteristic of the heterojunction device using the current-voltage characteristic under illumination of 100 mW/cm{sup 2} was also observed. Discussion of the obtained results and their comparison with the previous published data were also considered.

36 MATERIALS SCIENCE↗

Degradation of transparent conductive oxides: Interfacial engineering and mechanistic insights

Transparent conductive oxides (TCOs) are a known failure mode in a variety of thin film photovoltaic (PV) devices, through mechanisms such as resistivity increase and delamination. Degradation science studies of these materials, as well as most PV systems, have primarily utilized industry standard qualification protocols, which are not designed to be used as lifetime prediction tests. Here, this work applies a data science approach to this engineering challenge, utilizing commercially available TCOs and subjecting them to an array of stressors, including environmental and material stressors. Optical, electrical and surface sensitive TCO property metrics were monitored and analyzed en mass. Different degradation mechanisms and modes were observed when different stressor combinations were applied; TCO surfaces are sensitive to the proportion of water and light in an exposure, yellowing of the TCO only occurs when humidity and UV light are combined, and PEDOT:PSS (poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate)) application results in hazing and roughening of aluminum-doped zinc oxide (AZO). Using multi-variate analytics and plotting critical material properties against one another in a mechanistic plot, trade-offs between properties and the activation of different degradation mechanisms become readily apparent. In addition to a survey of failure modes of TCOs, a possible solution to the degradation of AZO was examined: the application of an organofunctional silane layer. The application of a thin APTES (3-aminopropyltriethoxysilane) film nearly eliminated the observed edge effects and greatly reduced the resistivity increase caused by damp heat exposure of AZO.

14 SOLAR ENERGY↗

Sputtered indium tin oxide as a recombination layer formed on the tunnel oxide/poly-Si passivating contact enabling the potential of efficient monolithic perovskite/Si tandem solar cells

We focus on utilizing sputtered indium tin oxide (ITO) as a recombination layer, having low junction damage to an n-type silicon solar cell with a front-side tunnel oxide passivating electron contact, thereby enabling the development of a high efficiency monolithic perovskite/Si tandem device. High transparency and low resistivity ITO films are deposited via low power DC magnetron sputtering at room temperature onto a front-side thin SiO x /n + poly-Si contact in a complete Cz n-Si cell with a back-side Al 2 O 3 /SiN x passivating boron-diffused p + -emitter on a random pyramid textured surface. We report the cell characteristics before and after ITO sputtering, and we find a cure at 250 °C in air is highly effective at mitigating any sputtering induced damage. Our ITO coated sample resulted in an implied open-circuit voltage (iV oc ) of 684.7 ± 11.3 mV with the total saturation current density of 49.2 ± 14.8 fA/cm 2 , an implied fill factor (iFF) of 81.9 ± 0.8%, and a contact resistivity in the range of 60 mΩ-cm 2 to 90 mΩ-cm 2 . After formation of a local Ag contact to the rear emitter and sputtered ITO film as the front-side contact without grid fingers, the pseudo-efficiency of 20.2 ± 0.5% was obtained with the V oc of 670.4 ± 7 mV and pseudo FF of 77.3 ± 1.3% under simulated one sun with the calculated short-circuit current density of 30.9 mA/cm 2 from the measured external quantum efficiency. Furthermore, our modelling result shows that efficiency exceeding 25% under one sun is practically achievable in perovskite/Si tandem configuration using the ITO recombination layer connecting a perovskite top cell and a poly-Si bottom cell.

14 SOLAR ENERGY↗

Synthesis and Characterization of Single Phase Metal Dodecaboride Solid Solutions: Zr 1-x Y x B 12 and Zr 1-x U x B 12

Single-phase metal dodecaboride solid solutions, Zr 0.5 Y 0.5 B 12 and Zr 0.5 U 0.5 B 12 , were arranged by arc melting from pure elements. The phase purity and composition were established by powder X-ray diffraction (PXRD), energy-dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and 10 B and 11 B solid-state nuclear magnetic resonance (NMR) spectroscopy. The effects of carbon addition to Zr 1-x Y x B 12 were studied and it was found that carbon causes fast cooling and as a result rapid nucleation of grains, as well as “templating” and patterning effects of the surface morphology. The hardness of the Zr 0.5 Y 0.5 B 12 phase is 47.6 ± 1.7 GPa at 0.49 N load, which is ~17% higher than that of its parent compounds, ZrB 12 and YB 12 , with hardness values of 41.6 ± 2.6 and 37.5 ± 4.3 GPa, respectively. The hardness of Zr 0.5 U 0.5 B 12 is ~54% higher than that of its UB 12 parent. The dodecaborides were confirmed to be metallic by band structure calculations, diffuse reflectance UV–vis, and solid-state NMR spectroscopies. The nature of the dodecaboride colors—violet for ZrB 12 and blue for YB 12 —can be applied to charge-transfer. XPS indicates that the metals are in the following oxidation states: Y 3+ , Zr 4+ , and U$^{{5+}/^{6+}}$. The superconducting transition temperatures (T c ) of the dodecaborides were determined to be 4.5 and 6.0 K for YB 12 and ZrB 12 , respectively, as shown by resistivity and superconducting quantum interference device (SQUID) measurements. The T c of the Zr 0.5 Y 0.5 B 12 solid solution was suppressed to 2.5 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxidative instability of ionomers in hydroxide-exchange-membrane water electrolyzers

Hydroxide-exchange membrane (HEM) electrolyzers can produce green H 2 with only earth-abundant catalysts and electrolyte-free (nominally pure) water feed, significantly decreasing system cost and complexity. However, HEM technology suffers from short lifetimes, attributed in part to poor stability of anion-exchange polymers used in the membrane and catalyst layers. We use electrochemical analysis and ex situ characterization techniques to study anion-exchange-polymer degradation in electrolyzers. Using multiple ionomers, catalyst-layer additives, and electrolyte feed, we show how anode-ionomer oxidation is the dominant degradation mechanism for all HEM-based electrolyzer cells tested. Here, we find improved device stability using oxidation-resistant catalyst-layer binders and propose new design strategies for advanced ionomer and catalyst-layer development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Room temperature detection of NO{sub 2} using InSb nanowire

Room temperature detection of NO{sub 2} down to one part-per-million (ppm) using single crystalline n-type InSb nanowires (NWs) chemiresistive gas sensor is presented. These sensors were synthesized and fabricated by the combination of chemical vapor deposition and dielectrophoresis alignment techniques. The sensor devices showed an increase in resistance upon exposure to successive increments of NO{sub 2} concentration up to 10 ppm. The reduction in conductance of n-type InSb NWs when exposed to NO{sub 2} is made possible due to the charge transfer from the InSb NW surface to the adsorbed electron acceptor NO{sub 2} molecules. The demonstrated results suggest InSb NW as a promising candidate in sensing applications as well as being environmental friendly over existing arsenic and/or phosphorous-based III-V NW sensors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Improving charge transport property and energy transfer with carbon quantum dots in inverted polymer solar cells

Carbon quantum dots (Cdots) are synthesized by a simple method and introduced into active layer of polymer solar cells (PSCs). The performance of doped devices was apparently improved, and the highest power conversion efficiency of 7.05% was obtained, corresponding to a 28.2% enhancement compared with that of the contrast device. The charge transport properties, resistance, impedance, and transient absorption spectrum are systematically investigated to explore how the Cdots affect on PSCs performance. This study reveals the importance of Cdots in enhancing the efficiency of PSCs and gives insight into the mechanism of charge transport improvement.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Abnormal bipolar resistive switching behavior in a Pt/GaO{sub 1.3}/Pt structure

A stable and repeatable abnormal bipolar resistive switching behavior was observed in a Pt/GaO{sub 1.3}/Pt sandwich structure without an electroforming process. The low resistance state (LRS) and the high resistance state (HRS) of the device can be distinguished clearly and be switched reversibly under a train of the voltage pulses. The LRS exhibits a conduction of electron tunneling, while the HRS shows a conduction of Schottky-type. The observed phenomena are considered to be related to the migration of oxygen vacancies which changes the space charge region width of the metal/semiconductor interface and results in a different electron transport mechanism.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Current-perpendicular-to-the-plane giant magnetoresistance in spin-valves with AgSn alloy spacers

We investigate the use of AgSn alloys as the spacer layer in current-perpendicular-to-the-plane magnetoresistance devices. Alloying with Sn increases resistivity but results in a reasonably long (>10 nm) spin-diffusion length, so large magnetoresistance can be achieved with thin AgSn spacers. Compared to Ag thin films, AgSn forms smaller grain sizes, reduced roughness, and exhibits less interdiffusion upon annealing, resulting in decreased interlayer magnetic coupling in exchange biased spin-valves. AgSn also shows improved corrosion resistance compared to Ag, which is advantageous for nanofabrication, including magnetic recording head sensors. Combining a AgSn spacer with Co-based Heusler alloy ferromagnet in an exchange biased, polycrystalline trilayer thinner than 12 nm results in magnetoresistance values up to 15% at room temperature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Hydrogen doping in HfO{sub 2} resistance change random access memory

The structures and energies of hydrogen-doped monoclinic hafnium dioxide were calculated using density-functional theory. The electronic interactions are described within the LDA + U formalism, where on-site Coulomb corrections are applied to the 5d orbital electrons of Hf atoms and 2p orbital electrons of the O atoms. The effects of charge state, defect-defect interactions, and hydrogenation are investigated and compared with experiment. It is found that hydrogenation of HfO{sub 2} resistance-change random access memory devices energetically stabilizes the formation of oxygen vacancies and conductive vacancy filaments through multiple mechanisms, leading to improved switching characteristic and device yield.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗