Statistical communication theory
Modulator transfer functions for fixed and ramp input waveforms, and nonlinear homomorphic system for echo removal
ECHO SUPPRESSION↗
SEARCH · Search NASA
Results for “Ramp”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Transient analysis of a feedback network containing a saturating nonlinear element.
Feedback network with saturating nonlinear element, analyzing transient response, noting ramp generator
Maffeo, C. J.↗
A comparison of experimental and calculated helium requirements for the pressurization of a Centaur liquid hydrogen tank
Ramp pressurization tests with gaseous helium in thick walled liquid hydrogen tank
Lacovic, R.↗
A two-dimensional, mixed-compression inlet system designed to self-restart at a Mach number of 3.5.
M 3.5 two dimensional mixed compression inlet system with self restart using flexible variable ramp system
Anderson, W. E.↗
A two-dimensional mixed-compression inlet system designed to self-restart at a Mach number of 3.5
M 3.5 two dimensional mixed compression inlet system with self restart using flexible variable ramp system
Anderson, W. E.↗
Triangular-wave generator with controlled sweep polarity
Generator, comprised largely of integrated circuits, has operational amplifier connected as integrator to provide linear voltage ramp, pair of logic gates and one-shot multivibrator function as sweep reverse circuit feeding the integrator. Solid state switch effects generator hold capability.
Wong, H. Y.↗
A second/third order hybrid phase locked receiver for tracking Doppler rates
Second/third order hybrid phase locked receiver for tracking frequency ramp signals
Tausworthe, R. C.↗
Dynamics of heat-pipe reactors
A split-core heat pipe reactor, fueled with either U(233)C or U(235)C in a tungsten cermet and cooled by 7-Li-W heat pipes, was examined for the effects of the heat pipes on reactor while trying to safely absorb large reactivity inputs through inherent shutdown mechanisms. Limits on ramp reactivity inputs due to fuel melting temperature and heat pipe wall heat flux were mapped for the reactor in both startup and at-power operating modes.
Niederauer, G. F.↗
A Numerical Study of Displacement Body and Curvature Effects on Incompressible and Compressible Laminar Boundary Layers
This technique has been applied to study such effects on incompressible flow around cylinders at moderate to low Reynolds numbers and for compression ramps at hypersonic Mach numbers by employing a finite difference method to obtain numerical solutions. The results indicate that the technique can be applied successfully in both regimes and does predict the correct trend in regions of large curvature and displacement body effects. It was concluded that curvature corrections should only be attempted in cases where all displacement effects can be fully accounted for.
Wornom, S. F.↗
Fluid flow analysis of a hot-core hypersonic wind-tunnel nozzle concept
A hypersonic-wind-tunnel nozzle concept which incorporates a hot-core flow surrounded by an annular flow of cold air offers a promising technique for maximizing the model size while minimizing the power required to heat the test core. This capability becomes especially important when providing the true-temperature duplication needed for hypersonic propulsion testing. Several two-dimensional wind-tunnel nozzle configurations that are designed according to this concept are analyzed by using recently developed analytical techniques for prediction of the boundary-layer growth and the mixing between the hot and cold coaxial supersonic airflows. The analyses indicate that introduction of the cold annular flow near the throat results in an unacceptable test core for the nozzle size and stagnation conditions considered because of both mixing and condensation effects. Use of a half-nozzle with a ramp on the flat portion does not appear promising because of the thick boundary layer associated with the extra length. However, the analyses indicate that if the cold annular flow is introduced at the exit of a full two-dimensional nozzle, an acceptable test core will be produced. Predictions of the mixing between the hot and cold supersonic streams for this configuration show that mixing effects from the cold flow do not appreciably penetrate into the hot core for the large downstream distances of interest.
Anders, J. B.↗
Dynamics of heat-pipe reactors.
A split-core heat-pipe reactor fueled with either 233-UC or 235-UC in a tungsten cermet and cooled by 7-Li-W heat pipes is examined for the effects of the heat pipes on this reactor in trying to safely absorb large reactivity inputs through inherent shutdown mechanisms. Limits on ramp reactivity inputs due to fuel-melting temperature and heat-pipe wall heat flux are mapped for the reactor in both startup and at-power operating modes.
Niederauer, G. F.↗
Displacement interaction and surface curvature effects on hypersonic boundary layers.
The title problem was studied employing implicit finite-difference methods to obtain numerical solutions to a composite set of boundary-layer equations valid to second order. Results are given for flow up a two-dimensional cubic compression ramp for free-stream Mach numbers of 6, 8, and 12.25 and for free-stream Re/inch equal to 85,800 and 25,800 at a wall-to-stagnation temperature ratio of 0.223. Comparisons with independent theories and experimental results are given. Nonsingular separation was produced at a free-stream Mach number of 12.25. For all cases considered, displacement and curvature effects canceled one another when a consistent treatment of inviscid and viscous curvature corrections was employed - the second-order theory virtually reproducing the first-order results.
Wornom, S. F.↗
Versatile, analog-to-digital, power-regulator controller
Power controller uses digital techniques to vary duty ratio of switching-type power regulators. Duty ratio is adjusted by comparing error signal with ramp voltage signal. As compared to previously-used switching regulators, controller uses fewer components and no magnetics and is readily adaptable to thick-film technology.
Mclyman, W. T.↗
Separation over a flat plate-wedge configuration at oceanic Reynolds numbers
An experimental study of flow over a two-dimensional flat plate-wedge configuration is presented. The investigation encompasses a range of Reynolds numbers characteristics of conditions encountered by deep submersible oceanic vehicles. Flow separation, similar to that found on high speed aircraft control surfaces, is reported and discussed in light of the laminar or transitional nature of the separated shear layer. As discovered in previous high Mach number studies of plate-wedge or ramp configurations, the dependency of the size of the separated region on free stream Reynolds number is reversed for laminar and transitional types of flow separation.
Campbell, D. R.↗
Basic flow characteristics of a linear aerospike nozzle segment.
The separated base flow region within a linear aerospike nozzle segment is investigated experimentally in an ejector-diffuser system. The nozzle-diffuser system and base pressure characteristics are described over the pressure ratio range from the 'open wake' to the 'closed wake' operation. Schlieren photographs and static pressure distributions along the test section centerline and top contour describe the transition from 'open wake' to 'closed wake' flow fields. Base pressure and static pressure distributions are utilized to present the effects of a ramp diffuser. The effects of base bleed on the base pressure ratio and structure of the nozzle flow field are also presented.
Mueller, T. J.↗
Feasibility study of the transonic biplane concept for transport aircraft application
Investigations were conducted to evaluate the feasibility of a transonic biplane consisting of a forward-mounted swept-back lower wing, a rear-mounted swept-forward upper wing, and a vertical fin connecting the wings at their tips. This wing arrangement results in significant reductions in induced drag relative to a monoplane designed with the same span, and it allows for a constant-section fuselage shape while closely matching an ideal area distribution curve for M = 0.95 cruise. However, no significant reductions in ramp weight were achieved for the biplane relative to a monoplane with the same mission capability. Flutter analyses of the biplane revealed both symmetric and antisymmetric instabilities that occur well below the required flutter speed. Further studies will be required to determine if acceptable flutter speeds can be achieved through the elimination of the instabilities by passive means or by active controls. Configurations designed for other missions, especially those with lower Mach numbers and lower dynamic pressures, should be examined since the geometries suitable for those design constraints might avoid the weight penalties and flutter instabilities which prevent exploitation of induced drag benefits for the configuration studied.
Lange, R. H.↗
A mass spectrometric system for analyzing thermal desorption spectra of ion-implanted argon and cesium in tungsten
A mass spectrometric system for determining the characteristics of materials used in instrumental development and aerospace applications was developed. The desorption spectra of cesium that was ion-implanted into polycrystalline tungsten and the effects on the spectra of bombardment of the tungsten by low energy (70 eV) electrons were investigated. Work function changes were measured by the retarding potential diode method. Flash desorption characteristics were observed and gas-reaction mechanisms of the surface of heated metal filaments were studied. Desorption spectra were measured by linearly increasing the sample temperature at a selected rate, the temperature cycling being generated from a ramp-driven dc power supply, with the mass spectrometer tuned to a mass number of interest. Results of the study indicate an anomolous desorption mechanism following an electron bombardment of the sample surface. The enhanced spectra are a function of the post-bombardment time and energy and are suggestive of an increased concentration of cesium atoms, up to 10 or more angstroms below the surface.
Wood, G. M., Jr.↗
New engineering systems for mobility
Aerospace technology transfer and a systems integration approach are considered in the development of a transportation system for the handicapped. The basic vehicle design includes a slide-out boarding ramp and wheelchair accommodations.
Keller, T. L.↗