Search NASA⌕ Search

SEARCH · Search NASA

Results for “Rockets”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Optimum exhaust velocity for laser-driven rockets

The laser-driven rocket in which remotely generated laser power is used to heat propellant belongs basically to the class of specific-impulse limited propulsion systems if difficult missions are considered. It was previously established that trip time reaches a minimum as specific impulse is varied for payload transfers from low earth orbit to synchronous orbit and return via laser-driven rocket propulsion, the computations being based on the perigee-propulsion laser drive described by Minovitch (1972). The present study shows that such minimum occur for all missions and that optimum specific impulse is primarily determined by the mission difficulty. More generally, this optimum specific impulse maximizes payload kinetic energy achievable with a fixed jet power and propulsion time. A formula relating propulsion time parameter to payload ratio is obtained for estimating mission capabilities of laser-driven rockets.

Moeckel, W. E.↗
NASA NTRS1976

Development of the Hawk/Nike Hawk sounding rocket vehicles

A new sounding rocket family, the Hawk and Nike-Hawk Vehicles, have been developed, flight tested and added to the NASA Sounding Rocket Vehicle Stable. The Hawk is a single-stage vehicle that will carry 35.6 cm diameter payloads weighing 45.5 kg to 91 kg to altitudes of 78 km to 56 km, respectively. The two-stage Nike-Hawk will carry payloads weighing 68 kg to 136 kg to altitudes of 118 km to 113 km, respectively. Both vehicles utilize the XM22E8 Hawk rocket motor which is available in large numbers as a surplus item from the U.S. Army. The Hawk fin and tail can hardware were designed in-house. The Nike tail can and fin hardware are surplus Nike-Ajax booster hardware. Development objectives were to provide a vehicle family with a larger diameter, larger volume payload capability than the Nike-Apache and Nike-Tomahawk vehicles at comparable cost. Both vehicles performed nominally in flight tests.

Flowers, B. J.↗
NASA NTRS1976

High temperature reformation of aluminum and chlorine compounds behind the Mach disk of a solid-fuel rocket exhaust

Chemical reactions expected to occur among the constituents of solid-fuel rocket engine effluents in the hot region behind a Mach disk are analyzed theoretically. With the use of a rocket plume model that assumes the flow to be separated in the base region, and a chemical reaction scheme that includes evaporation of alumina and the associated reactions of 17 gas species, the reformation of the effluent is calculated. It is shown that AlClO and AlOH are produced in exchange for a corresponding reduction in the amounts of HCl and Al2O3. For the case of the space shuttle booster engines, up to 2% of the original mass of the rocket fuel can possibly be converted to these two new species and deposited in the atmosphere between the altitudes of 10 and 40 km. No adverse effects on the atmospheric environment are anticipated with the addition of these two new species.

Park, C.↗
NASA NTRS1976

Facilities and experiment results of the NASA sounding rocket program

The NASA rocket program on reduced gravity materials experiments is reported, including experimental results obtained from the single-stage Black Brant VC sounding rockets first flight and the developed equipment. The first flight was made on 11 December 1975, and nine different experiments were done in the five min of weightlessness. All systems operated satisfactorily and each experiment generated interesting results and recorded phenomena that have been reported. Each of the experiments will be flown again in modified form to obtain additional data or check unexpected results on the multiple rocket launches planned each year. General-purpose apparatus and facilities are being developed and built to allow repeated experimentation of various materials by different investigators. For example, multiple-cavity furnaces with rapid heat-up and cool-down possibilities, providing isothermal and gradient thermal profiles, will accommodate a wide variety of solidification experiments. Special hardware satisfying specific individual requirements is also being developed.

Snyder, R. S.↗
NASA NTRS1976

Studies of the exhaust products from solid propellant rocket motors

This study was undertaken to determine the feasibility of conducting environmental chamber tests on the physical processes which occur when a solid rocket motor exhaust mixes with the ambient atmosphere. Of particular interest was the interaction between hydrogen chloride, aluminum oxide, and water vapor. The program consisted of three phases: (1) building a small rocket motor and using it to provide the exhaust species in a controlled environment; (2) evaluating instruments used to detect and measure HCl concentrations and if possible determining whether the HCl existed in the gaseous state or as an acid aerosol; (3) monitoring a series of 6.4-percent scale space shuttle motor tests and comparing the results to the environmental chamber studies. Eighteen firings were conducted in an environmental chamber with the initial ambient relative humidity set at values from 29 to 100 percent. Two additional firings were made in a large shed, and four were made on an open concrete apron. Six test firings at MSFC were monitored, and the ground level concentrations are reported. Evidence is presented which shows that the larger Al2O3 (5 to 50 micrometers) particles from the rocket motor can act as condensation nuclei. Under appropriate ambient conditions where there is sufficient water vapor this results in the formation of an acid aerosol. Droplets of this acid were detected both in the environmental chamber and in the scaled shuttle engine tests.

Dawbarn, R.↗
NASA NTRS1977

Rocket calibration of the Nimbus 6 solar constant measurements

Total solar irradiance was observed simultaneously outside the earth's atmosphere by three types of absolute cavity radiometers and duplicates of four of the Nimbus 6 Earth Radiation Budget (ERB) solar channels in a June 1976 sounding rocket experiment. The preliminary average solar constant result from the cavity radiometers is 1367 Wm (-2) with an uncertainty of less than + or - 0.5% in S.I. units. The duplicate ERB channel 3 on the rocket gave a value of 1389 Wm (-2) which agreed exactly with the Nimbus 6 ERB channel 3 measurement made simultaneously with the rocket flight.

Duncan, C. H.↗
NASA NTRS1977

The Swedish Rocket Corps, 1833 - 1845

Rockets for pyrotechnic displays used in Sweden in the 19th century are examined in terms of their use in war situations. Work done by the Swedish chemist J. J. Berzelius, who analyzed and improved the propellants of such rockets, and the German engineer, Martin Westermaijer, who researched manufacturing techniques of these rockets is also included.

Skoog, A. I.↗
NASA NTRS1977

F. Gomez Arias' rocket vehicle project

Research done by Spanish pioneer rocket scientists in the 19th century was investigated with major emphasis placed on F. Gomez Arias' rocket vehicle project. Arias, considered the world's first designer of rocket propelled, manned aircraft, was interested in solving the problem of space navigation. Major concerns included ascent and direction of heavier-than-airmachines, as well as ascent and direction of balloons.

Carreras, R.↗
NASA NTRS1977

Analysis of liquid-propellant rocket engines designed by F. A. Tsander

The development of the oxygen-gasoline OR-2 engines and the oxygen-alcohol GIRD-10 rocket engine is described. A result of Tsander's rocket research was an engineering method for propellant calculation of oxygen-propellant rocket engines that determined the basic parameters of the engine and the structural elements.

Dushkin, L. S.↗
NASA NTRS1977

A rocket-borne airglow photometer

The design of a rocket-borne photometer to measure the airglow emission of ionized molecular nitrogen in the 391.4 nm band is presented. This airglow is a well known and often observed phenomenon of auroras, where the principal source of ionization is energetic electrons. It is believed that at some midlatitude locations energetic electrons are also a source of nighttime ionization in the E region of the ionosphere. If this is so, then significant levels of 391.4 nm airglow should be present. The intensity of this airglow will be measured in a rocket payload which also contains instrumentation to measured in a rocket payload which also contains instrumentation to measure energetic electron differential flux and the ambient electron density. An intercomparison of the 3 experiments in a nightime launch will allow a test of the importance of energetic electrons as a nighttime source of ionization in the upper E region.

Paarmann, L. D.↗
NASA NTRS1978

Atmospheric scavenging of solid rocket exhaust effluents

Solid propellant rocket exhaust was directly utilized to ascertain raindrop scavenging rates for hydrogen chloride. Two chambers were used to conduct the experiments; a large, rigid walled, spherical chamber stored the exhaust constituents, while the smaller chamber housing all the experiments was charged as required with rocket exhaust HCl. Surface uptake experiments demonstrated an HCl concentration dependence for distilled water. Sea water and brackish water HCl uptake was below the detection limit of the chlorine-ion analysis technique used. Plant life HCl uptake experiments were limited to corn and soybeans. Plant age effectively correlated the HCl uptake data. Metallic corrosion was not significant for single 20 minute exposures to the exhaust HCl under varying relative humidity. Characterization of the aluminum oxide particles substantiated the similarity between the constituents of the small scale rocket and the full size vehicles.

Fenton, D. L.↗
NASA NTRS1978

Electrets used to measure exhaust cloud effluents from Solid Rocket Motor (SRM) during demonstration model (DM-2) static test firing

Electrets were compared with fixed flow samplers during static test firing. The measurement of the rocket exhaust effluents by samplers and electrets indicated that the Solid Rocket Motor had no significant effect on the air quality in the area sampled. The results show that the electrets (a passive device which needs no power) can be used effectively alongside existing measuring devices (which need power). By placing electrets in areas where no power is available, measurements may be obtained. Consequently, it is a valuable complementary instrument in measuring rocket exhaust effluents in areas where other measuring devices may not be able to assess the contaminants.

Susko, M.↗
NASA NTRS1977

Rocket calibration of the Nimbus 6 solar constant measurements

A sounding rocket experiment was performed in June 1976, in which the solar constant was observed simultaneously outside the earth's atmosphere by three types of absolute cavity radiometers (the Primary Absolute Cavity Radiometer and two Active Cavity Radiometers, Type IV) and duplicates of Nimbus 6 ERB/ESP (Earth Radiation Budget/Eclectic Satellite Pyrheliometer) solar channels. The preliminary average solar constant result from the cavity radiometers is 1367 W/sq m with an uncertainty of less than plus or minus 0.5% in SI units. The duplicate ERB channel 3 on the rocket gave a value of 1389 W/sq m, which agreed exactly with the Nimbus 6 ERB channel 3 measurement made simultaneously with the rocket flight.

Duncan, C. H.↗
NASA NTRS1978

Characterization of the non axial thrust generated by large solid propellant rocket motors in three axis stabilized ascent

Nonaxial thrusts produced by solid rocket motors during three-axis stabilized attitude control have been determined from ascent experience on twenty three Burner II, Burner IIA and Block 5D-1 upper stage vehicles. A data base representing four different rocket motor designs (three spherical and one extended spherical) totaling twenty five three-axis stabilized firings is generated. Solid rocket motor time-varying resultant and lateral side force vector magnitudes, directions and total impulses, and roll torque couple magnitudes, directions, and total impulses are tabulated in the appendix. Population means and three sigma deviations are plotted. Existing applicable ground test side force and roll torque magnitudes and total impulses are evaluated and compared to the above experience data base. Within the spherical motor population, the selected AEDC ground test data consistently underestimated experienced motor side forces, roll torques and total impulses. Within the extended spherical motor population, the selected AEDC test data predicted experienced motor side forces, roll torques, and total impulses, with surprising accuracy considering the very small size of the test and experience populations.

Kosmann, W. J.↗
NASA NTRS1978

Rocket effluent: Its ice nucleation activity and related properties

To investigate the possibility of inadvertent weather modification from rocket effluent, aerosol samples were collected from an instrumented aircraft subsequent to the Voyager 1 and 2 launches. The aerosol's morphology, concentration, and size distribution were examined with an electron microscope. The elemental compositions of individual particles were analyzed with an X-ray energy spectrometer. Ice nucleus concentration was measured with a thermal diffusion chamber. The particles' physical and chemical properties were related to their ice nucleation activity. A laboratory experiment on rocket propellant exhaust was conducted under controlled conditions. Both laboratory and field experimental results indicated that rocket propellant exhaust can produce active ice nuclei and modify local weather in suitable meteorological conditions.

Parungo, F. P.↗
NASA NTRS1979

A rocket-borne electrostatic analyzer for measurement of energetic particle flux

A rocket-borne electrostatic analyzer experiment is described. It is used to measure energetic particle flux (0.9 to 14 keV) in the nighttime midlatitude E region. Energetic particle precipitation is believed to be a significant nighttime ionization source, particularly during times of high geomagnetic activity. The experiment was designed for use in the payload of a Nike Apache sounding rocket. The electrostatic analyzer employs two cylindrical parallel plates subtending a central angle of 90 deg. The voltage waveform supplied to the plates is a series of steps synchronized to the spin of the payload during flight. Both positive and negative voltages are provided, extending the detection capabilities of the instrument to both electrons and protons (and positive ions). The development, construction and operation of the instrument is described together with a preliminary evaluation of its performance in a rocket flight.

Pozzi, M. A.↗
NASA NTRS1979

Rocket radio measurement of electron density in the nighttime ionosphere

One experimental technique based on the Faraday rotation effect of radio waves is presented for measuring electron density in the nighttime ionosphere at midlatitudes. High frequency linearly-polarized radio signals were transmitted to a linearly-polarized receiving system located in a spinning rocket moving through the ionosphere. Faraday rotation was observed in the reference plane of the rocket as a change in frequency of the detected receiver output. The frequency change was measured and the information was used to obtain electron density data. System performance was evaluated and some sources of error were identified. The data obtained was useful in calibrating a Langmuir probe experiment for electron density values of 100/cu cm and greater. Data from two rocket flights are presented to illustrate the experiment.

Gilchrist, B. E.↗