Search NASA⌕ Search

SEARCH · Search NASA

Results for “SET”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Bicep/Keck XV: The Bicep3 Cosmic Microwave Background Polarimeter and the First Three-year Data Set

Abstract We report on the design and performance of the B icep3 instrument and its first three-year data set collected from 2016 to 2018. B icep3 is a 52 cm aperture refracting telescope designed to observe the polarization of the cosmic microwave background (CMB) on degree angular scales at 95 GHz. It started science observation at the South Pole in 2016 with 2400 antenna-coupled transition-edge sensor bolometers. The receiver first demonstrated new technologies such as large-diameter alumina optics, Zotefoam infrared filters, and flux-activated SQUIDs, allowing ∼10× higher optical throughput compared to the Keck design. B icep3 achieved instrument noise equivalent temperatures of 9.2, 6.8, and 7.1 μ K CMB s and reached Stokes Q and U map depths of 5.9, 4.4, and 4.4 μ K arcmin in 2016, 2017, and 2018, respectively. The combined three-year data set achieved a polarization map depth of 2.8 μ K arcmin over an effective area of 585 square degrees, which is the deepest CMB polarization map made to date at 95 GHz.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Perfecting Our Set of Spectrophotometric Standard DA White Dwarfs

We verified for photometric stability a set of DA white dwarfs with Hubble Space Telescope magnitudes from the near-ultraviolet to the near-infrared and ground-based spectroscopy by using time-spaced observations from the Las Cumbres Observatory network of telescopes. The initial list of 38 stars was whittled to 32 final ones, which comprise a high-quality set of spectrophotometric standards. These stars are homogeneously distributed around the sky and are all fainter than r ~ 16.5 mag. Their distribution is such that at least two of them would be available to be observed from any observatory on the ground at any time at airmass less than 2. Light curves and different variability indices from the Las Cumbres Observatory data were used to determine the stability of the candidate standards. When available, Pan-STARRS1, Zwicky Transient Facility, and TESS data were also used to confirm the star classification. Our analysis showed that four DA white dwarfs may exhibit evidence of photometric variability, while a fifth is cooler than our established lower temperature limit, and a sixth star might be a binary. In some instances, due to the presence of faint nearby red sources, care should be used when observing a few of the spectrophotometric standards with ground-based telescopes. Light curves and finding charts for all the stars are provided.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Statistical Validation of Multiple Related Data Sets—Case Study Using Interstellar Boundary Explorer Satellite Data

Abstract Space scientists often face the question of whether data collected by different instruments are measurements of the same source population. This paper proposes a statistical validation method for evaluating the agreement between such related data sets. It offers a detailed case study focused on validating a new data set from the Interstellar Boundary Explorer (IBEX) mission, which serves as a practical how-to guide for similar analyses. Since 2008, the IBEX satellite has been gathering data on heliospheric energetic neutral atoms (ENAs) while being exposed to various sources of background noise, such as cosmic rays and solar energetic particles. The IBEX mission initially released only a qualified triple-coincidence (qABC) data product, which was designed to provide observations of ENAs free of background contamination. Further measurements revealed that the qABC data were in fact susceptible to contamination, having relatively low ENA counts and high background rates. To mitigate this issue, the mission team recently considered releasing a certain qualified double-coincidence (qBC) data product, which has roughly twice the detection rate of the qABC data product. This paper presents a simulation-based validation of the new qBC data product against the already-released qABC data product. The results show that the qBCs can plausibly be said to be measuring the same source population as the qABCs up to an average absolute deviation of 3.6%. Visual diagnostics provide additional confirmation of source rate coherence across data products. The framework introduced here is general and can be applied to other validation problems both within and outside the field of space physics.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

A Comparison of Three Neodymium Atomic Data Sets for Kilonova Modeling

We examine the impact of input neodymium (Nd) atomic data on the light curves and spectra of kilonovae (KNe), probing the sensitivity of kilonova observables to the atomic physics of this important lanthanide element. We use the SuperNu Monte Carlo radiative transfer code, simulating a simple semianalytic 1D kilonova (KN) with a pure Nd atmosphere, fixing the radiative transfer method while using input atomic data generated by three different codes: the LANL suite of atomic physics codes, HULLAC, and Autostructure. We see that the choice of atomic data significantly shapes the resulting light curves and spectra. Peak bolometric luminosities differ by a ratio of nearly 1.5 between HULLAC/Autostructure and LANL data sets. Moreover, we observe significant near- to mid-IR differences in the structure of the spectra. We specifically attribute these differences to the choice of atomic data for neutral Nd I. Many of the results here have been adapted from a presentation at “Radiative Transfer and Atomic Physics of Kilonovae” in Stockholm, 2023. We additionally present a LANL data set with energies calibrated to available values in the NIST Atomic Spectra Database, and demonstrate that this calibration also significantly affects IR spectral structure at late time. The substantial differences in KN observables that arise from tuning the atomic data of just one lanthanide element highlight the special attention that must be paid to atomic physics uncertainties when modeling KNe, from AT2017gfo to beyond.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Dark Energy Survey Year 3 Results: Photometric Data Set for Cosmology

In this work, we describe the Dark Energy Survey (DES) photometric data set assembled from the first three years of science operations to support DES Year 3 cosmologic analyses, and provide usage notes aimed at the broad astrophysics community. Y3 GOLD improves on previous releases from DES, Y1 GOLD, and Data Release 1 (DES DR1), presenting an expanded and curated data set that incorporates algorithmic developments in image detrending and processing, photometric calibration, and object classification. Y3 GOLD comprises nearly 5000 deg 2 of grizY imaging in the south Galactic cap, including nearly 390 million objects, with depth reaching a signal-to-noise ratio ~10 for extended objects up to iAB ~ 23.0, and top-of-the-atmosphere photometric uniformity <3 mmag. Compared to DR1, photometric residuals with respect to Gaia are reduced by 50%, and per-object chromatic corrections are introduced. Y3 GOLD augments DES DR1 with simultaneous fits to multi-epoch photometry for more robust galactic color measurements and corresponding photometric redshift estimates. Y3 GOLD features improved morphological star–galaxy classification with efficiency >98% and purity >99% for galaxies with 19 < i AB < 22.5. Additionally, it includes per-object quality information, and accompanying maps of the footprint coverage, masked regions, imaging depth, survey conditions, and astrophysical foregrounds that are used to select the cosmologic analysis samples.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Do Piperonyl Butoxide Long-Lasting Insecticide Treated Nets Provide Additional Protection Against Malaria Infections Compared with Conventional Nets in an Operational Setting in Western Kenya?

Malaria control in sub-Saharan Africa has stagnated despite widespread adoption of control measures such as long-lasting insecticidal nets (LLINs). Progress has stalled, in part, because of pyrethroid insecticide resistance, driving the need for retooling to increase the effectiveness of bed nets. Consequently, LLINs have been treated with the chemical synergist piperonyl butoxide (PBO). Piperonyl butoxide LLINs have been shown to be efficacious in controlled settings; however, their effectiveness in real-world settings warrants investigation. In Bungoma County, Western Kenya, a cohort of 768 participants was followed from June 2017 to December 2023 via active and passive surveillance. Household visits were conducted monthly, during which LLIN use for nets distributed in 2017 and 2021 was recorded, and symptomatic malaria cases were identified using rapid diagnostic tests (RDTs). The comparative effectiveness of PBO versus conventional LLINs was assessed in terms of malaria infections. A multilevel logistic regression model was fit with monthly RDT results as the dependent variable. The study results indicate that PBO LLINs provide greater protection against malaria at the individual level than conventional LLINs (odds ratio: 0.70; 95% CI: 0.47–1.03), although the findings were not statistically significant. The added protection against malaria infections provided by PBO LLINs compared with conventional LLINs observed in the current study aligns with findings from most previous studies, although this finding was not statistically significant. In areas with documented pyrethroid resistance, the use of LLINs with an added synergist, such as PBO, can provide additional protection against malaria infections (compared with pyrethroid-only LLINs) and should be considered for scaled-up scenarios despite the additional cost.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Computer-aided Abnormality Detection in Chest Radiographs in a Clinical Setting via Domain-adaptation

Deep learning (DL) models are being deployed at medical centers to aid radiologists for diagnosis of lung conditions from chest radiographs. Such models are often trained on a large volume of publicly available labeled radiographs. These pre-trained DL models’ ability to generalize in clinical settings is poor because of the changes in data distributions between publicly available and privately held radiographs. In chest radiographs, the heterogeneity in distributions arises from the diverse conditions in X-ray equipment and their configurations used for generating the images. In the machine learning community, the challenges posed by the heterogeneity in the data generation source is known as domain shift, which is a mode shift in the generative model. In this work, we introduce a domain-shift detection and removal method to overcome this problem. Our experimental results show the proposed method’s effectiveness in deploying a pre-trained DL model for abnormality detection in chest radiographs in a clinical setting.

Dubey, Abhishek↗
DOE OSTI2026

Fracture Intersections under Stress: Laboratory Data and Code [Data set]

The connectivity of natural and induced fractures governs the injection and withdrawal of fluids from subsurface reservoirs. Connectivity depends on intersections that control how fluids mix and move through the entire system. Here, we present data sets from 3D X-ray microscopy measurements of simple fracture networks under stress. 3D printing was used to create prismatic blocks that formed fracture networks composed of 2 orthogonal fractures. The network orientation was either "x" or "+" relative to an applied vertical stress. 3D data sets were collected for normal loads of 25, 100 and 200 Newtons for samples with fracture surfaces with either correlated or uncorrelated asperity distributions. The file contains data from the 12 samples analyzed along with an example code used to extract the intersection geometry. Additional experimental details can be found in the manuscript "Geologic Stress Modulates Fluid Mixing at Fracture Intersections" (10.1038/s43247-026-03525-9)and supplemental information to appear in Communications Earth & Environment in 2026.

02 PETROLEUM↗
NASA NTRS1972

Geologic setting of the Apollo 15 samples.

The samples and photographs returned from the Apollo 15 site show that Hadley Delta is largely underlain by breccias whose clasts are mainly fragments of coarse-grained feldspathic rocks and nonmare-type basalt. Conspicuous sets of lineaments, visible in surface and orbital photographs of Mount Hadley and Hadley Delta, may represent systematic layering or fracture sets. The mare surface, with regolith about 5 meters thick, is underlain by two major basalt types, at least one of which has extensive lateral continuity and is exposed in the upper wall of Hadley Rille. Gradual erosional recession of the edges and filing of the interior of the rille by talus have contributed to the present cross sectional profile.

Source record↗
NASA NTRS1973

Signal conditioner test set

Compact, light-weight, solid-state test set can be used to check signal conditioning modules while they are installed in system. Test sets may also be used to cycle ground computer, if it is suspected of malfunctioning, rather than using signal conditioners.

Houck, W. H.↗
NASA NTRS1972

The pseudonoise test set: Communication system's performance evaluation based upon RMS error testing

A pseudonoise (PN) test set was built to provide a relatively easy means of accurately determining the end-to-end rms error introduced by a communication system when subjected to wideband data. It utilizes a filtered pseudorandom sequence generator as a wideband data source, providing a convenient means for digitally delaying the input reference signal for comparison with the distorted test communication system output. In addition to providing a means to measure the end-to-end rms error and the average delay of a communication system, the PN test set also provides a means to determine the tested system's impulse response and correlation function. The theory of PN testing is discussed in detail along with the most difficult aspects of implementation, the building of matched filter pairs. Both analytical and empirical results are reported which support the contentions that this is an accurate and practical way to acquire figures of merit for complete communication systems.

Wallace, G. R.↗
NASA NTRS1973

On-film optical recording of camera lens settings

An apparatus is described for recording a representation of the camera lens aperture and focus setting on the film of a camera, while the photographic image is being recorded. A data lens is provided between the camera lens and film, by means of which the aperture and focus setting may be determined. The determination is made by measuring both the location and the size of a data image provided by the data lens. The data lens apparatus requires no electrical power, is low in weight, and does not result in an increase in the external dimensions of the camera.

Thompson, R. E.↗
NASA NTRS1972

The Fuzzy Sets Approach to Pattern Recognition

The fuzzy set concept is defined and its application to pattern recognition is illustrated. An iterative procedure for learning the equi-membership surfaces and for generating a set of discriminate functions for two pattern classes is given.

Wilson, T.↗
NASA NTRS1972

Three dimensional turbulent boundary layers: Data sets for two-space coordinate flows

Sets of data (flows) from eight original sources on three-dimensional turbulent boundary layers were reevaluated and tabulated in a common format. The flows studied were all of the type describable in only two space coordinates, e.g., flow over a swept wing of infinite span. The principal data in each set are profiles of the main and crossflow components of mean velocity. Turbulent shear stress vector profiles were available for two flows, Bradshaw and Terrell (1969) and Johnson (1970). Free stream pressure gradient, wall shear stress coefficient and angle, integral thickness and left and right hand sides of the momentum integral equations were evaluated in a consistent manner for each flow.

Wheeler, A. J.↗
NASA NTRS1976

Demonstration of the frequency offset errors introduced by an incorrect setting of the Zeeman/magnetic field adjustment on the cesium beam frequency standard

The fine frequency setting of a cesium beam frequency standard is accomplished by adjusting the C field control with the appropriate Zeeman frequency applied to the harmonic generator. A novice operator in the field, even when using the correct Zeeman frequency input, may mistakenly set the C field to any one of seven major Beam I peaks (fingers) represented by the Ramsey curve. This can result in frequency offset errors of as much as 2.5 parts in ten to the tenth. The effects of maladjustment are demonstrated and suggestions are discussed on how to avoid the subtle traps associated with C field adjustments.

Kaufmann, D. C.↗
NASA NTRS1976

Classification improvement by optimal dimensionality reduction when training sets are of small size

A computer simulation was performed to test the conjecture that, when the sizes of the training sets are small, classification in a subspace of the original data space may give rise to a smaller probability of error than the classification in the data space itself; this is because the gain in the accuracy of estimation of the likelihood functions used in classification in the lower dimensional space (subspace) offsets the loss of information associated with dimensionality reduction (feature extraction). A number of pseudo-random training and data vectors were generated from two four-dimensional Gaussian classes. A special algorithm was used to create an optimal one-dimensional feature space on which to project the data. When the sizes of the training sets are small, classification of the data in the optimal one-dimensional space is found to yield lower error rates than the one in the original four-dimensional space.

Starks, S. A.↗
NASA NTRS1976

Shutter/aperture settings for aerial photography

Determination of aerial camera shutter and aperture settings to produce consistently high-quality aerial photographs is a task complicated by numerous variables. Presented in this article are brief discussions of each variable and specific data which may be used for the systematic control of each. The variables discussed include sunlight, aircraft altitude, subject and season, film speed, and optical system. Data which may be used as a base reference are included, and encompass two sets of sensitometric specifications for two film-chemistry processes along with camera-aircraft parameters, which have been established and used to produce good exposures. Information contained here may be used to design and implement an exposure-determination system for aerial photography.

Lockwood, H. E.↗
NASA NTRS1976

LS-44: An improved deep space network station location set for Viking navigation

Improved estimates for the spin axis and longitude components of the Deep Space Network station locations were obtained from post-flight processing of radio metric data received from various Mariner planetary missions. The use of an upgraded set of ionospheric calibrations and the incorporation of near-Venus and near-Mercury radio metric data from the Mariner 10 spacecraft are the principal contributing effects to the improvement. These new estimates, designated Location Set (LS) 44, have supported Viking navigation activities in the vicinity of Mars. As such, the station locations were determined relative to the planetary positions inherent in JPL Development Ephemeris (DE) 84, which was used throughout the Viking mission. The article also presents and discusses a version of LS 44 based upon the latest planetary ephemeris, DE 96.

Koble, H. M.↗