SEARCH · Search NASA

Results for “Stream temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

All sources NASA NTRS DOE OSTI

DOE OSTI2026

Opportunities and Challenges for Hydrotreating of Catalytic Fast Pyrolysis Oil to Fuels

Catalytic fast pyrolysis (CFP) provides a versatile platform for producing fuels to combat climate change and meet decarbonizing targets. In this contribution, we will discuss the hydroprocessing of CFP oils to a variety of fuels, including sustainable aviation fuel (SAF), diesel, and marine fuel. Both standalone and co-hydroprocessing with petroleum streams will be covered. Hydrotreating CFP oil at temperatures around 400 Degrees Celsius can produce a highly deoxygenated product with oxygen contents below the detection limit. However, the quality of fuel fractions produced has been a problem, manifesting as low octane numbers for the gasoline-range fraction and low cetane numbers for the diesel-range fraction. Incorporating an initial transition zone for hydrogenation during hydrotreating was shown to dramatically increase the diesel fraction cetane number from 24 to 45. A similar approach enabled the production of a cycloalkane-rich SAF fraction meeting key ASTM 4054 guidelines with respect to density, viscosity, heating value, volatility, freeze and flash point. Over 400 hours of hydrotreating for SAF was demonstrated with no signs of catalyst bed fouling, measured by pressure drop over the catalyst bed. Compared to other fuels, marine fuel is unique in that it does not require complete deoxygenation. We investigated the minimum hydrotreating requirements to produce fuel compatible with very low sulfur fuel oil, and the results suggested 30% reduction in hydrotreating costs for this approach. Co-hydroprocessing offers an opportunity to take advantage of refinery infrastructure and economies of scale although the operation is less flexible with respect to operating conditions. Co-hydroprocessing CFP oil with petroleum streams gave efficient deoxygenation at milder conditions (e.g. at temperatures of 320 Degrees Celsius) than required for standalone hydrotreating. Over 90% incorporation of biogenic carbon in the CFP oil was confirmed by carbon-14 analysis. Hydrotreating of CFP oil, whether by standalone or co-processing, can produce a variety of fuel cuts, whose quality can be tailored by changing process conditions. Challenges remain, including long-term catalyst performance and determining CFP oil quality requirements.

09 BIOMASS FUELS↗

NASA NTRS1972

Effect of radiometric errors on accuracy of temperature-profile measurement by the spectral-scanning method.

The spectral-scanning method may be used to determine the temperature profile of a jet- or rocket-engine exhaust stream by measurements of gas radiation and transmittance at two or more wavelengths. A single, fixed line of sight is used, using immobile radiators and radiometers outside of the gas stream, and there is no interference with the flow. A given radiometric error causes an error in computed temperatures. The ratio between temperature error and radiometric error depends on profile shape, path length, temperature level, the strength of line absorption, and the absorption coefficient and its temperature coefficient. These influence the choice of wavelengths for any given gas. Conditions for minimum temperature error are derived. Numerical results are presented for a two wavelength measurement on a family of profiles that may be expected in a practical case of H2 - O2 combustion. Under favorable conditions, the fractional error in temperature approximates the fractional error in radiant-flux measurement.

Buchele, D. R.↗

NASA NTRS2000

Computer Programs for Calculating the Isentropic Flow Properties for Mixtures of R-134a and Air

Three computer programs for calculating the isentropic flow properties of R-134a/air mixtures which were developed in support of the heavy gas conversion of the Langley Transonic Dynamics Tunnel (TDT) from dichlorodifluoromethane (R-12) to 1,1,1,2 tetrafluoroethane (R-134a) are described. The first program calculates the Mach number and the corresponding flow properties when the total temperature, total pressure, static pressure, and mole fraction of R-134a in the mixture are given. The second program calculates tables of isentropic flow properties for a specified set of free-stream Mach numbers given the total pressure, total temperature, and mole fraction of R-134a. Real-gas effects are accounted for in these programs by treating the gases comprising the mixture as both thermally and calorically imperfect. The third program is a specialized version of the first program in which the gases are thermally perfect. It was written to provide a simpler computational alternative to the first program in those cases where real-gas effects are not important. The theory and computational procedures underlying the programs are summarized, the equations used to compute the flow quantities of interest are given, and sample calculated results that encompass the operating conditions of the TDT are shown.

Kvaternik, Raymond G.↗

NASA NTRS1990

Evaluation of thermal loading on a methane injector at high pressure and temperature

Experimental and numerical analyses are conducted to determine the surface temperature on a methane fuel injector used to produce a high enthalpy test stream for a combustion-fed subscale wind tunnel facility. It was found that the ratio of the methane fuel injection velocity to the air stream velocity is a significant factor in the production of high injector surface temperatures which lead to rapid deterioration of the fuel injector structure. The numerical code utilized for the computational analysis was found to be representative of the experimentally measured data since the experimental trends were reproduced by the numerical simulation. The quantitative accuracy of the numerical predictions could not be assessed from the data gathered because of the difficulty of making a noninterfering injector surface temperature measurement. The numerical code can be used for parametric evaluation of combustor parameters and thus will serve as an important tool in the design of such fuel injector systems.

Harvin, Stephen F.↗

DOE OSTI2025

Walker Branch Watershed: Daily Stream Metabolism and Organic Carbon Spiraling Metrics in the West Fork of Walker Branch, Tennessee, USA, 2004-2010

This dataset contains daily metabolism estimates of gross primary production (GPP), ecosystem respiration (ER), and net ecosystem production (NEP), in addition to organic carbon spiraling length (SOC) and mineralization velocity (VfOC) estimates at the West Fork of Walker Branch, a small headwater stream, in the Walker Branch Watershed, Tennessee, USA. Observations were made from 2004-2010 (2004-01-01 to 2010-12-31). These data were generated to assess seasonal and interannual variability in metabolism and organic carbon spiraling and to explore potential driver variables, as analyses of intra- and interannual variability in metabolism and organic carbon spiraling are currently limited, leaving knowledge gaps in the driving mechanisms of and future changes to stream metabolism and carbon processing under climate change. Additionally, measurements of discharge (Q), stream width, stream- and canopy-level photosynthetically active radiation (PAR), water temperature, and precipitation from this time frame are included. This dataset contains one data file in comma separated (*.csv) format.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1993

Spectral measurement of nonequilibrium arc-jet free-stream flow

Spectra of radiation emitted by the free-stream flow of air in an arcjet wind tunnel at NASA-Ames Research Center were studied experimentally. The arcjet produces a high energy gaseous flow that is expanded to low density and low temperature to produce high velocities in the free-stream for simulating atmospheric entry conditions. The gamma and the delta band systems of nitric oxide emitted by the free stream were measured in the second order. The NO-beta band system, which is in the same spectral region as the NO-gamma and NO-delta band systems, was not present in the data. Only transitions from the lowest vibrational level of the upper state of both the NO-gamma and NO-delta band systems were observed. The rotational temperature determined from these band systems was 660 +/- 50 deg K. The maximum possible vibrational temperature was determined to be less than 850 +/- 50 deg K. The electronic temperature determined from the ratio of the intensities of the NO-gamma and NO-delta band systems was 7560 +/- 340 K. The results indicate that the arcjet free-stream flow is in thermal nonequilibrium.

Gopaul, Nigel K. J. M.↗

NASA NTRS1973

Near real time water resources data for river basin management

The author has identified the following significant results. Twenty Data Collection Platforms (DCP) are being field installed on USGS water resources stations in the Delaware River Basin. DCP's have been successfully installed and are operating well on five stream gaging stations, three observation wells, and one water quality monitor in the basin. DCP's have been installed at nine additional water quality monitors, and work is progressing on interfacing the platforms to the monitors. ERTS-related water resources data from the platforms are being provided in near real time, by the Goddard Space Flight Center to the Pennsylvania district, Water Resources Division, U.S. Geological Survey. On a daily basis, the data are computer processed by the Survey and provided to the Delaware River Basin Commission. Each daily summary contains data that were relayed during 4 or 5 of the 15 orbits made by ERTS-1 during the previous day. Water resources parameters relays by the platforms include dissolved oxygen concentrations, temperature, pH, specific conductance, well level, and stream gage height, which is used to compute stream flow for the daily summary.

Paulson, R. W.↗

NASA NTRS1986

On the behaviour of a stressed cotton canopy in a direct air stream

Reflectance variations of a stressed cotton canopy were conducted in the presence of a fan-generated air stream to investigate the effects of air movement and the resulting temperature changes on remotely-sensed data. The initial drop in reflectance after application of the air stream was found to be greatest in the morning because leaf turgor was at a maximum, enabling leaves on the windward side of the canopy to assume surprisingly stable vertical positions. By afternoon, a reduction in leaf turgor was responsible for less stem displacement and consequently a reduction in light-trapping capability. However, reflectance oscillations were greater because the leaves had become sufficiently limp to flutter at the edges and about the petioles exposing both adaxial and abaxial surfaces to the incident light.

Schutt, J. B.↗

NASA NTRS1974

Interplanetary stream interfaces

At 1 AU there is a distinct boundary (the stream interface) in the interaction region of a stream in the solar wind, characterized by an abrupt drop in density, a similar increase in temperature, and a small increase in speed. In some cases, this is a tangential discontinuity, in others it is probably evolving into a tangential discontinuity. It is suggested that stream interfaces form in the interplanetary medium as a consequence of the nonlinear evolution of streams generated by an increase in temperature in the solar envelope. This evolution eventually leads to the formation of a reverse shock behind the interface and a forward shock ahead of it. Two instances in which both a stream interface and a reverse shock had developed at 1 AU are presented. Examples of flare-generated shocks that passed through a stream and were observed near a stream interface are also presented. It is shown that stream interfaces are definitely not the same structures that others have identified as piston boundaries.

Burlaga, L. F.↗

NASA NTRS1978

Solar wind stream interfaces

Results are presented for a superposed epoch analysis of discontinuous solar wind interfaces. The average time-space profiles of stream interfaces are discussed with reference to fluid properties (flow speed, pressure ridge, density, electron and proton temperatures) and kinetic properties (electron core and halo, flow speed fluctuations, electron heat flux, alpha particles). Other aspects of stream interfaces are described, such as the persistence of individual interfaces, shock associations, the sector boundaries of the interplanetary magnetic field, and sudden impulses in the geomagnetic field. Interface position is considered in terms of the observed temperature jump. A conceptual model of high-speed stream evolution is proposed.

Gosling, J. T.↗

NASA NTRS1977

An experimental study of reactive turbulent mixing

An experimental study of two coaxial gas streams, which react very rapidly, was performed to investigate the mixing characteristics of turbulent flow fields. The center stream consisted of a CO-N2 mixture and the outer annular stream consisted of air vitiated by H2 combustion. The streams were at equal velocity (50 m/sec) and temperature (1280 K). Turbulence measurements were obtained using hot film anemometry. A sampling probe was used to obtain time averaged gas compositions. Six different turbulence generators were placed in the annular passage to alter the flow field mixing characteristics. The turbulence generators affected the bulk mixing of the streams and the extent of CO conversion to different degrees. The effects can be related to the average eddy size (integral scale) and the bulk mixing. Higher extents of conversion of CO to CO2 were found be increasing the bulk mixing and decreasing the average eddy size.

Cooper, L. P.↗

NASA NTRS1977

An experimental study of reactive turbulent mixing

An experimental study of the turbulent mixing of two coaxial gas streams, which react very rapidly (pseudo-hypergolic chemical kinetics), was performed to investigate the mixing characteristics of turbulent flow fields. The center stream consisted of a CO-N2 mixture and the outer annular stream consisted of air vitiated by H2 combustion. The streams were at equal velocity (50 m/sec) and temperature (1280 K). Turbulence measurements were obtained using hot film anemometry. A sampling probe was used to obtain time averaged gas compositions. Six different turbulence generators were placed in the annular passage to alter the flow field mixing characteristics. The turbulence generators affected the bulk mixing of the streams and the extent of CO conversion to different degrees. The effects can be related to the average eddy size and the bulk mixing. Higher extents of conversion of CO to CO2 were found by increasing the bulk mixing and decreasing the average eddy size.

Cooper, L. P.↗

NASA NTRS1976

A high pressure, high temperature combustor and turbine-cooling test facility

A new test facility is being constructed for developing turbine-cooling and combustor technology for future generation aircraft gas turbine engines. Prototype engine hardware will be investigated in this new facility at gas stream conditions up to 2480 K average turbine inlet temperature and 4.14 x 10 to the 6th power n sq m turbine inlet pressure. The facility will have the unique feature of fully automated control and data acquisition through the use of an integrated system of mini-computers and programmable controllers which will result in more effective use of operating time, will limit the number of operators required, and will provide built in self protection safety systems. The facility and the planning and design considerations are described.

Cochran, R. P.↗

NASA NTRS1974

A discussion of interplanetary post-shock flows with two examples

Plasma and magnetometer observations are described for two flare-associated shock flows and the comparison of them with models. One represents a class of flows where the shock is followed by a stream and separated from it by a region in which density temperature and speed decrease monotonically. The other is characterized by a complex region between the shock and the following stream, which has many discontinuities and fluctuations, but in which there is no increase in helium concentration. These two types of flow can be distinguished using ground magnetograms, since the former shows no sudden impulses following the shock, whereas the latter shows many.

Ogilvie, K. W.↗

NASA NTRS1974

A discussion of interplanetary postshock flows with two examples

Plasma and magnetometer observations of two types of flare-associated shock flows are described and compared with present models. One type represents a class of flows in which the shock is followed by a stream and separated from it by a region in which density, temperature, and speed decrease monotonically. Neither the blast wave model nor the two-stage model, in which the stream and the shock are attributed to the same flare, can quantitatively describe this class. The other type is characterized by a complex region between the shock and the following stream, which has many discontinuities and fluctuations but in which there is no increase in helium concentration. This class of event is not describable in terms of the conventional pictures presented, for example, by Hundhausen (1972). These two types of flow can be distinguished by using ground magnetograms, since the first type shows no sudden impulses following the shock, whereas the second type shows many.

Ogilvie, K. W.↗

NASA NTRS1985

Basic cryogenics and materials. Phase 1

The effects of cryogenic temperatures on the mechanical and physical properties of materials are summarized. Heat capacity and thermal conductivity are considered in the context of conservation of liquid nitrogen, thermal stability of the gas stream, and the response time for changes in operating temperature. Particular attention is given to the effects of differential expansion and failure due to thermal fatigue. Factors affecting safety are discussed, including hazards created due to the inadvertent production of liquid oxygen and the physiological effects of exposure to liquid and gaseous nitrogen, such as cold burns and asphyxiation. The preference for using f.c.c. metals at low temperatures is explained in terms of their superior toughness. The limitations on the use of ferritic steels is also considered. Nonmetallic materials are discussed, mainly in the context of their LOX compatibility and their use in the form of foams and fibers as insultants, seals, and fiber reinforced composites.

Wigley, D. A.↗

NASA NTRS1985

Basic cryogenics and materials

Wigley, D. A.↗

NASA NTRS1991

Aspects of the evolution of the marine boundary layer during cold-air outbreaks off the southeast coast of the United States

Remote sensing and in situ measurements that were obtained in February 1986 were combined with the results from a boundary-layer model to study aspects of the evolution of the maine boundary layer (MBL) during two cold-air outbreaks (CAO) off the southeast coast of the United States. Maximum total heat fluxes occurred over the Gulf Stream northeast of Cape Hatteras where very cold, dry air encountered the Gulf Stream and where the wind speeds were very large. Maximum 6-h values for the total heat flux were as high as 2015 W/m. The magnitude of the area-average heat flux in the MBL was influenced not only by the surface air and dewpoint temperatures and the surface wind speeds off the coast but also by the area covered by Gulf Stream water (sea surface temperature greater than 22 C). The heat flux distribution off the coast rapidly produced large horizontal temperature and humidity differences over distances on the order of 100 km.

Vukovich, Fred M.↗