Search NASA⌕ Search

SEARCH · Search NASA

Results for “Substrates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Transient plasma potential in pulsed dual frequency inductively coupled plasmas and effect of substrate biasing

An electron emitting probe in saturated floating potential mode has been used to investigate the temporal evolution of plasma potential and the effect of substrate RF biasing on it for pulsed dual frequency (2 MHz/13.56 MHz) inductively coupled plasma (ICP) source. The low frequency power (P{sub 2MHz}) has been pulsed at 1 KHz and a duty ratio of 50%, while high frequency power (P{sub 13.56MHz}) has been used in continuous mode. The substrate has been biased with a separate bias power at (P{sub 12.56MHz}) Argon has been used as a discharge gas. During the ICP power pulsing, three distinct regions in a typical plasma potential profile, have been identified as ‘initial overshoot’, pulse ‘on-phase’ and pulse ‘off-phase’. It has been found out that the RF biasing of the substrate significantly modulates the temporal evolution of the plasma potential. During the initial overshoot, plasma potential decreases with increasing RF biasing of the substrate, however it increases with increasing substrate biasing for pulse ‘on-phase’ and ‘off-phase’. An interesting structure in plasma potential profile has also been observed when the substrate bias is applied and its evolution depends upon the magnitude of bias power. The reason of the evolution of this structure may be the ambipolar diffusion of electron and its dependence on bias power.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2015

Variable substrate preference among phospholipase D toxins from sicariid spiders

Venoms of the sicariid spiders contain phospholipase D enzyme toxins that can cause severe dermonecrosis and even death in humans. These enzymes convert sphingolipid and lysolipid substrates to cyclic phosphates by activating a hydroxyl nucleophile present in both classes of lipid. The most medically relevant substrates are thought to be sphingomyelin and/or lysophosphatidylcholine. To better understand the substrate preference of these toxins, we used 31 P NMR to compare the activity of three related but phylogenetically diverse sicariid toxins against a diverse panel of sphingolipid and lysolipid substrates. Two of the three showed significantly faster turnover of sphingolipids over lysolipids, and all three showed a strong preference for positively charged (choline and/or ethanolamine) over neutral (glycerol and serine) headgroups. Strikingly, however, the enzymes vary widely in their preference for choline, the headgroup of both sphingomyelin and lysophosphatidylcholine, versus ethanolamine. An enzyme from Sicarius terrosus showed a strong preference for ethanolamine over choline, whereas two paralogous enzymes from Loxosceles arizonica either preferred choline or showed no significant preference. Intrigued by the novel substrate preference of the Sicarius enzyme, we solved its crystal structure at 2.1 Å resolution. Lastly, the evolution of variable substrate specificity may help explain the reduced dermonecrotic potential of some natural toxin variants, because mammalian sphingolipids use primarily choline as a positively charged headgroup; it may also be relevant for sicariid predatory behavior, because ethanolamine-containing sphingolipids are common in insect prey.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

Substrate damage and incorporation of sapphire into barium hexaferrite films deposited by aerosol deposition

Barium Hexaferrite (BaM) grown on sapphire substrate by aerosol deposition is investigated in a subtractive wedge series to determine the extent of energetic substrate damage and indentation. Energy dispersive x-ray spectroscopy (EDS) mapping reveals Al 2 O 3 particulates ejected from the substrate surface during growth. The concentration of particles is higher at the substrate-film interface but persists throughout the 6 mu m thick film. An estimate of the indentation depth (similar to 600 nm) was agreed upon using two EDS techniques (line scan analysis and substrate surface reconstruction by areal integration). X-ray diffraction patterns show peak polycrystalline Al 2 O 3 intensity in 1.5 mu m thick wedges and a decrease at higher thicknesses, confirming that Al 2 O 3 particulate density decreases further from the substrate. Here, magnetic characterization showed decreased magnetic moment compared to bulk and thickness dependence consistent with the fractional increase of Al 2 O 3 content in the films. X-ray absorption at the Fe L 3 edge suggests a reduction of material close to the surface, but this reduction appears secondary in magnitude to the effect of damage from deposition.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Probing Substrate Diffusion in Interstitial MOF Chemistry with Kinetic Isotope Effects

Metal–organic frameworks (MOFs) have garnered substantial interest as platforms for site-isolated catalysis. Efficient diffusion of small-molecule substrates to interstitial lattice-confined catalyst sites is critical to leveraging unique opportunities of these materials as catalysts. Understanding the rates of substrate diffusion in MOFs is challenging, and few in situ chemical tools are available to evaluate substrate diffusion during interstitial MOF chemistry. Herein, we demonstrate nitrogen atom transfer (NAT) from a lattice-confined Ru 2 nitride to toluene to generate benzylamine. We use the comparison of the intramolecular deuterium kinetic isotope effect (KIE), determined for amination of a partially deuterated substrate, with the intermolecular KIE, determined by competitive amination of a mixture of perdeuterated and undeuterated substrates, to establish the relative rates of substrate diffusion and interstitial chemistry. We anticipate that the developed KIE-based experiments will contribute to the development of porous materials for group-transfer catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Ternary complexes of isopentenyl phosphate kinase from Thermococcus paralvinellae reveal molecular determinants of non‐natural substrate specificity

Abstract Isopentenyl phosphate kinases (IPKs) have recently garnered attention for their central role in biocatalytic “isoprenol pathways,” which seek to reduce the synthesis of the isoprenoid precursors to two enzymatic steps. Furthermore, the natural promiscuity of IPKs toward non‐natural alkyl‐monophosphates (alkyl‐Ps) as substrates has hinted at the isoprenol pathways' potential to access novel isoprenoids with potentially useful activities. However, only a handful of IPK crystal structures have been solved to date, and even fewer of these contain non‐natural substrates bound in the active site. The current study sought to elucidate additional ternary complexes bound to non‐natural substrates using the IPK homolog fromThermococcus paralvinellae(TcpIPK). Four such structures were solved, each bound to a different non‐natural alkyl‐P and the phosphoryl donor substrate/product adenosine triphosphate (ATP)/adenosine diphosphate (ADP). As expected, the quaternary, tertiary, and secondary structures ofTcpIPK closely resembled those of IPKs published previously, and kinetic analysis of a novel alkyl‐P substrate highlighted the potentially dramatic effects of altering the core scaffold of the natural substrate. Even more interesting, though, was the discovery of a trend correlating the position of two α helices in the active site with the magnitude of an IPK homolog's reaction rate for the natural reaction. Overall, the current structures ofTcpIPK highlight the importance of continued structural analysis of the IPKs to better understand and optimize their activity with both natural and non‐natural substrates.

Biochemistry & Molecular Biology↗
DOE OSTI2025

Uncovering Sequence and Structural Characteristics of Fungal Expansin‐Related Proteins With Potential to Drive Substrate Targeting

Expansins loosen plant cell wall networks through disrupting non-covalent bonds between cellulose microfibrils and matrix polysaccharides. Whereas expansins were first discovered in plants, expansin-related proteins have since been identified in bacteria and fungi. The biological function of microbial expansins remains unclear; however, several studies have shown distinct binding preferences toward different structural polysaccharides. Earlier studies of bacterial expansin-related proteins uncovered sequence and structural features that correlate to substrate binding. Herein, 20 fungal expansin-related sequences were recombinantly produced in Komagataella phaffii, and the purified proteins were compared in terms of substrate binding to cellulosic and chitinous substrates. The impact of pH on the zeta potential of prioritized substrates was also measured, and Principal Component Analysis was performed to uncover correlations between protein characteristics (e.g., pI, hydrophobicity, surface charge distribution) and measured substrate binding preferences. Whereas acidic proteins with a predicted pI less than 5.0 preferentially bound to chitin, basic proteins with pI greater than 8.0 preferentially bound to xylan and xylan-containing fiber. Similar to many cellulases, binding to cellulose was correlated to relatively high aromatic amino acid content in the protein sequence and presence of a carbohydrate binding module (CBM), which in the case of expansins is a C-terminal CBM63. Whereas overall sequence characteristics could be correlated to substrate binding preference, the identity of amino acids occupying conserved positions that impact protein activity was better correlated with loosenin versus expansin classifications.

chitin↗
DOE OSTI2019

Orientation Relationships of Pure Tin on Single Crystal Germanium Substrates

The limited number of independent β-Sn grain orientations resulting from the difficulty in nucleating β-Sn during solidification of Sn-based solders has a large effect on the resulting β-Sn grain size and, hence, on overall solder joint performance and reliability. This study analyzes the efficacy of Ge as a heterogeneous nucleation agent for β-Sn by observing the morphologies and orientation relationships of as-deposited, solid-state annealed, and liquid-state annealed pure Sn films on single crystal Ge (100), (110), and (111) substrates. Here, the results from scanning electron microscopy and electron backscatter diffraction showed that the as-deposited Sn films all deposited with a Sn (001)|| z-axis texture, regardless of the underlying Ge substrate orientation. Solid-state annealing at 150 °C for 5 min did not result in significant dewetting of the Sn films, and the films maintained their as-deposited texture of Sn (001)|| z-axis, regardless of the underlying Ge substrate orientation. Liquid-state annealing at 235 °C for 1 min resulted is large-scale dewetting of the Sn films and re-orientation of the Sn films on the various Ge substrates. After solidification, the Ge (100) and (110) single crystal substrates produced patches of dewetted grains of the same orientation but there were no consistent Sn grain textures after liquid-state annealing, suggesting no single orientation relationship. In contrast, solidification on Ge (111) single crystal substrates resulted in isolated grains with a single Sn film texture and an orientation relationship of (100) Sn ∥(111) Ge and [100] Sn ∥[110] Ge . Density Functional Theory simulations of the experimentally observed Ge (111) sample orientation relationship and the Ge/Sn cube-on-cube orientation relationship suggest favorable relative interfacial binding energies for both interface orientations.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Experimental Evaluation of Interfacial Bonding Strength Between 304 Stainless Steel Substrate and Electrodeposited Nickel Coating Using Mesoscale Mechanical Testing Methods

Electrodeposition is a commonly used method for depositing a metal layer on a metallic substrate, to provide a decorative finish or for functional purposes including wear and corrosion resistance. The interfacial bonding strength is a critical factor in determining the quality of electrodeposition, as it ensures the adhesion of the deposited layer to the substrate. Despite its importance, there has not previously been a suitable mechanical testing method to quantitatively characterize the bonding strength between the electrodeposited layers and the substrate, due to the high strength of the materials and to restrictions imposed by the geometry (due to the small thickness of the plating layer) to manufacture tensile bars. In this study, we introduce a novel mesoscale mechanical testing method to overcome these limitations. This technique was applied to assess the bonding strength between a 304 stainless steel (SS) substrate and electrodeposited nickel with three different plating formulae (nickel sulfamate, Watts bath, and hard nickel). The thickness of the pure nickel coatings achieved for each of the three electrolyte solutions was approximately 1 mm on each side of the substrate. Mesoscale tensile bars of 1 mm length were manufactured by a femtosecond laser, with the material interface at the center of the gauge section, and then tensile-tested with digital image correlation. Further, the results proved that the electrodeposition technique is able to produce a very high bonding strength that is close to the yield strength of both the substrate material and the electrodeposited nickel layer. Additionally, in the case of the Watts bath formula, the interfacial bonding strength between the SS 304 and electrodeposited nickel can exceed that of the nickel layer. This method is expected to be useful for quantifying the interfacial bonding strength in numerous applications.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Structural insight into the substrate specificity of acyl-CoA oxidase1 from Yarrowia lipolytica for short-chain dicarboxylyl-CoAs

Highlights: • The crystal structure of acyl-CoA oxidase1 from Yarrowia lipolytica (YlACOX1) was determined. • The substrate binding tunnel of YlACOX1 was elucidated. • Substrate specificity for short-chain dicarboxylyl-CoA of YlACOX1 was elucidated. Acyl-CoA oxidase (ACOX) plays an important role in fatty acid degradation. The enzyme catalyzes the first reaction in peroxisomal fatty acid β-oxidation by reducing acyl-CoA to 2-trans-enoyl-CoA. The yeast Yarrowia lipolytica is able to utilize fatty acids, fats, and oil as carbon sources to produce valuable bioproducts. We determined the crystal structure of ACOX1 from Y. lipolytica (YlACOX1) at a resolution of 2.5 Å. YlACOX1 forms a homodimer, and the monomeric structure is composed of four domains, the Nα, Nβ, Cα1, and Cα2. The FAD cofactor is bound at the dimerization interface between the Nβ- and Cα1-domains. The substrate-binding tunnel formed by the interface between the Nα-, Nβ-, and Cα1-domains is located proximal to FAD. Amino acid and structural comparisons of YlACOX1 with other ACOXs show that the substrate-binding pocket of YlACOX1 is much smaller than that of the medium- or long-chain ACOXs but is rather similar to that of the short-chain ACOXs. Moreover, the hydrophilicity of residues constituting the end region of the substrate-binding pocket in YlACOX1 is quite similar to those in the short-chain ACOXs but different from those of the medium- or long-chain ACOXs. These observations provide structural insights how YlACOX1 prefers short-chain dicarboxylyl-CoAs as a substrate.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

Planar compression of extracellular substrates induces S phase arrest via ATM-independent CHK2 activation

Highlights: • Planar compression of the extracellular substrate induces S phase arrest. • Cancer cells do not exhibit compression-induced S phase arrest. • The CHK2-p53 pathway mediates compression-induced S phase arrest. • Compression-induced activation of CHK2 is independent of ATM. • Actin disassembly upon substrate compression is required for S phase arrest. Cell proliferation is regulated not only by soluble chemical factors but also by mechanical cues surrounding cells. Mechanical stretch of extracellular substrates is known to promote cell proliferation by driving exit from the G{sub 0} phase and entry into the S phase. Here, we report that planer compression of extracellular substrates induces cell cycle arrest in the S phase. The compression-induced S phase arrest is mediated by the checkpoint kinase 2 (CHK2)-p53 pathway. In contrast to the canonical S phase checkpoint pathway activated by DNA damage, CHK2 activation by the substrate compression is independent of ataxia telangiectasia mutated (ATM). We further find that disassembly of the actin cytoskeleton is required for the compression-induced S phase arrest. Notably, cancer cells do not exhibit S phase arrest upon the substrate compression. Our results suggest a novel mechanism for homeostatic control of cell growth under mechanical perturbations.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Familial Alzheimer mutations stabilize synaptotoxic γ-secretase-substrate complexes

Mutations that cause familial Alzheimer’s disease (FAD) are found in amyloid precursor protein (APP) and presenilin, the catalytic component of γ-secretase, that together produce amyloid β-peptide (Aβ). Nevertheless, whether Aβ is the primary disease driver remains controversial. We report here that FAD mutations disrupt initial proteolytic events in the multistep processing of APP substrate C99 by γ-secretase. Cryoelectron microscopy reveals that a substrate mimetic traps γ-secretase during the transition state, and this structure aligns with activated enzyme-substrate complex captured by molecular dynamics simulations. In silico simulations and in cellulo fluorescence microscopy support stabilization of enzyme-substrate complexes by FAD mutations. Neuronal expression of C99 and/or presenilin-1 in Caenorhabditis elegans leads to synaptic loss only with FAD-mutant transgenes. Designed mutations that stabilize the enzyme-substrate complex and block Aβ production likewise led to synaptic loss. Collectively, these findings implicate the stalled process—not the products—of γ-secretase cleavage of substrates in FAD pathogenesis.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Universal method for the optimization of HDC coating uniformity on non-planar, non-stationary substrates for inertial confinement fusion targets

The thickness uniformity of chemical vapor deposited (CVD) diamond coatings on non-planar, non-stationary substrates depends on both the intrinsic instantaneous coating thickness distribution (ICTD) of the coating conditions used and, if applicable, on the frequency of substrate reorientation. While important for many CVD diamond applications, the relative impact of the ICTD and substrate reorientation on the coating thickness uniformity has not been studied. In this work, we systematically investigate the effect of these factors for microwave-plasma chemical vapor deposition (MPCVD) of diamond (referred to as high density carbon (HDC) in the inertial confinement fusion (ICF) community) coatings on spherical, rolling substrates. This coating technique is used to fabricate capsules for ICF experiments, which require extreme coating uniformity with <0.3 % thickness variation (so-called Mode 1 or M1) to ensure symmetric compression of imploding targets. To extract the otherwise unobservable reorientation timescale (Δt), Monte Carlo simulations were performed using experimental ICTD data as input. This combined approach confirms scaling relationships between the substrate reorientation timescale as well as coating thickness and coating uniformity, as expected from a 3D random walk. Simulations confirm that M1 is Rayleigh-distributed and scales as (Δt) 1/2 , consistent with the randomization of two angles that determine orientation of a sphere. We also demonstrate that, under the conditions studied, Δt is the dominant factor in determining thickness uniformity while the intrinsic ICTD has minimal impact. Finally, experiments show that Δt can be affected by total batch size under constant agitation conditions due to space constraints that limit the capsule reorientation kinetics. In conclusion, this study highlights the utility of a combined experiment-simulation approach as a general methodology for understanding and improving coating uniformity on non-planar, non-stationary substrates.

Capsule↗
DOE OSTI2021

Morphology engineering of iridium electrodes via modifying titanium substrates with controllable pillar structures for highly efficient oxygen evolution reaction

Nowadays, Ti is the well-chosen anode substrate material for proton exchange membrane electrolyzer cells (PEMECs) and modifications of the substrate surfaces are essential for the fabrication of highly efficient electrodes. Herein, we introduce the morphology engineering of Ir/Ti electrodes with different acid treatments of hydrochloric acid (HCl) and oxalic acid (OA), and the comparative benefits of these two acid treatment methods are studied from the aspects of their impacts on the morphology, interfacial contact resistance (ICR), and oxygen evolution reaction (OER) performances of resultant electrodes. Notably, compared to the flat surface from OA treatment, Ti substrates with the pillar structure could be successfully achieved via HCl etching. Further, the HCl and the oxalic acid (OA) treatments would reduce the interfacial contact resistance (ICR) to 15.2% and 5.5% of the pristine Ti substrate at 1.38 MPa, respectively. By iridium electrodeposition on Ti substrates, Ir/Ti electrodes with different catalyst loadings are fabricated. With similar low-loadings of about 0.05 mgIr cm –2 , an Ir/Ti electrode with HCl treated substrate exhibits a lower overpotential of ~283 mV at 10 mA cm –2 current density than 305 mV from OA treatment, due to the boosted reaction areas from HCl treatment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Natural garnet reinforced high density polyethylene composites for sustainable microwave substrates

Highlights: • A cost effective and ecofriendly alternative for commercial microwave substrates based on HDPE and Garnet mineral is proposed. • AFM images indicated the surface roughness of the substrate is very low and has the required degree of surface finish to minimize conduction loss. • Composite with 0.5 vol fraction of Garnet has ε{sub r} = 5.7, tan δ = 0.00185 (at 5 GHz), CTE = 114 ppm/{sup o}C and thermal conductivity = 1.3 Wm{sup −1}K{sup −1}. • The moisture absorption and thermal stability of dielectric properties are in the acceptable range for microwave substrate applications. - Abstract: A cost effective and ecofriendly alternative for commercially available microwave substrates is proposed in the present study. A polymer composite based on high-density polyethylene (HDPE) filled with garnet mineral was fabricated using sigma-blend technique with 0.1–0.5-volume fraction of filler. The atomic force microscopic images indicated the surface roughness of the substrate is very low and has the required degree of surface finish to avoid conduction loss. For 0.5 vol fraction of garnet, the composite showed a dielectric constant (ε{sub r}) = 5.7 and dielectric loss (tan δ) = 0.00185 at 5 GHz. Moreover, coefficient of thermal expansion (CTE), thermal conductivity (k{sub c}) and tensile strength are 114 ppm/{sup o}C, 1.3 Wm{sup −1}K{sup −1} and 14.3 MPa respectively for filler volume fraction, V{sub f} = 0.5. The dielectric, thermal, moisture absorption and mechanical properties indicate that the garnet/HDPE composites are ideal candidate for cost effective and sustainable microwave substrates.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Comparison of cracking behavior of nanocrystalline Cu film on substrates of different plastic deformation mechanisms

Nanocrystalline (NC) metallic thin films on metal substrates usually undergo substantial cracking at applied strains of a few percent due to strain concentration at the film/substrate interfaces. In this work, we show that the cracking of a nanocrystalline Cu film can be significantly inhibited by a NiTi substrate. NC Cu films are deposited on 304 stainless steel, Kapton and NiTi substrates, in which plastic deformation occurs via dislocation slip, molecule chain disentanglement and collective lattice shear, respectively. NC Cu film on NiTi substrate starts to show observable cracks at an applied strain of 24%, in contrast to 6% for that on steel and 15% for that on Kapton. Further, the crack density in the film on NiTi substrate is two to three orders lower than the counterparts. The discrepancy is suggested to attribute to the reduced local strain concentration enabled by the uniform lattice shear and high strain hardening of the NiTi substrate.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Sputter deposition of ultrathick Bi coatings onto rotating substrates for inertial confinement fusion

Sputter-deposited Bi is a potential candidate material for the production of inertial confinement fusion (ICF) hohlraums, which are sphero-cylindrical canisters that serve as the housing for hydrogen-fuel-filled capsules in ICF implosions. The fabrication of hohlraums involves deposition onto rotating sphero-cylindrical substrates and, hence, requires an understanding of oblique angle deposition phenomena. Here, we systematically study the effect of dynamic substrate tilt on properties of Bi films deposited onto rotating planar substrates. Results show that film morphology, porosity, and electrical resistivity depend on substrate tilt. In comparison with films deposited onto substrates adhered to a stationary sample holder, films deposited on rotating substrates have more uniform microstructure with fewer void defects. Based on Monte Carlo simulations, these changes in film morphology and microstructure are attributed to averaging and geometric effects related to sample position and rotation. In conclusion, the fabrication of an ∼ 50-µm-thick Bi film on a rotating sphero-cylindrical mandrel demonstrates a significant step toward the production of Bi hohlraums.

Bismuth↗
DOE OSTI2020

Substrate-Dependent Exciton Diffusion and Annihilation in Chemically Treated MoS 2 and WS 2

Atomically thin semiconductors such as monolayer MoS 2 and WS 2 exhibit nonlinear exciton–exciton annihilation at notably low excitation densities (below ~10 excitons/μm 2 in exfoliated MoS 2 ). In this work, we show that the density threshold at which annihilation occurs can be tuned by changing the underlying substrate. When the supporting substrate is changed from SiO 2 to Al 2 O 3 or SrTiO 3 , the rate constant for second-order exciton–exciton annihilation, k XX [cm 2 /s], is reduced by 1 or 2 orders of magnitude, respectively. Using transient photoluminescence microscopy, we measure the effective room-temperature exciton diffusion coefficient in bis(trifluoromethane)sulfonimide-treated MoS 2 to be in the range D = 0.03–0.06 cm 2 /s, corresponding to a diffusion length of L D = 350 nm for an exciton lifetime of τ = 18 ns, which does not depend strongly on the substrate. We discuss possible mechanisms for the observed behavior, including substrate permittivity, long-range exciton–exciton or exciton–charge interactions, defect-mediated Auger recombination, and spatially inhomogeneous exciton populations arising from substrate-induced disorder. Exciton annihilation limits the overall efficiency of 2D semiconductor devices operating at high exciton densities; the ability to tune these interactions via the underlying substrate is an important step toward more efficient optoelectronic technologies featuring atomically thin materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Determining Surface Energy of Porous Substrates by Spray Ionization

In this work, we have developed a new spray-based method for characterizing surface energies of planar, porous substrates. Distinct spray modes (electrospray versus electrostatic spray), from the porous substrates, occur in the presence of an applied DC potential after wetting with solvents of different surface tension. The ion current resulting from the spray process is maximized when the surface energy of the porous substrate approaches the surface tension of the wetting solvent. By monitoring the selected ion current (e.g., benzoylecgonine, m/z 290 → 168) with a mass spectrometer or the total ion current with an ammeter, we determined the solvent surface tension yielding the maximum ion current to indicate the surface energy of the solid. Detailed evaluations using polymeric substrates of known surface energies enabled effective calibration of the approach that resulted in the correct estimation of the surface energy of hydrophobic paper substrates prepared by gas-phase silanization. A three-parameter empirical model suggests that the experimentally observed ion current profile is governed by differential partitioning of analyte controlled by the interfacial forces between the wetting solvent and the porous substrate.

36 MATERIALS SCIENCE↗