SEARCH · Search NASA
Results for “Support effect”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Computational studies of electrochemical CO 2 reduction on subnanometer transition metal clusters
Here, computational studies of electrochemical reduction of CO 2 to CO, HCOOH and CH 4 were carried out using tetra-atomic transition metal clusters (Fe 4 , Co 4 , Ni 4 , Cu 4 and Pt 4 ) at the B3LYP level of theory. Novel catalytic properties were discovered for these subnanometer clusters, suggesting that they may be good candidate materials for CO 2 reduction. The calculated overpotentials of producing CH 4 are in the order: Co 4 < Fe 4 < Ni 4 < Cu 4 < Pt 4 with both Co 4 and Fe 4 having overpotentials less than 1 V. Investigation of the effects of supports found that a Cu 4 cluster on a graphene defect site has a limiting potential for producing CH 4 comparable to that of a Cu (111) surface. However, due to the strong electronic interaction with the Cu 4 cluster, the defective graphene support has the advantage of significantly increasing the limiting potentials for the reactions competing with CH 4 , such as the hydrogen evolution reaction (HER), and CO production.
Eu 2+ –Eu 3+ valence transition in double, Eu-, and Na-doped PbSe from transport, magnetic, and electronic structure studies
The Eu atoms in Pb 1-x Eu x Se have long been assumed to be divalent. We show that p-type doping of this magnetic semiconductor alloy with Na can modify the effective Eu valence: a mixed, Eu 2+ –Eu 3+ state appears in Pb 1-x-y Eu x Na y Se at particular values of y. Magnetization, carrier concentration, resistivity, and thermopower of Pb 1-x-y Eu x Na y Se are reported for a number of samples with different x and y. A pronounced increase in thermopower at a given carrier concentration was identified and attributed to the presence of enhanced ionized impurity scattering. A strong decrease in the hole concentration is observed in Pb1-yNaySe when Eu is added to the system, which we attribute to a Eu 2+ –Eu 3+ self-ionization process. This is evidenced by magnetization measurements, which reveal a significant reduction of the magnetic moment of Pb 1-x Eu x Se upon alloying with Na. Further, a deviation of magnetization from a purely paramagnetic state, described by a Brillouin function, identifies antiferromagnetic interactions between the nearest-neighbor Eu atoms: a value of J ex /k B = -0.35 K was found for the exchange coupling parameter. The conclusion of a Eu 2+ –Eu 3+ self-ionization process being in effect is supported further by the electronic structure calculations, which show that an instability of the 4f 7 configuration of the Eu 2+ ion appears with Na doping. In conclusion, schematically, it was found that the Eu 4f levels form states near enough to the Fermi energy that hole doping can lower the Fermi energy and trigger a reconfiguration of a 4f electronic shell.
Acidic effect of porous alumina as supports for Pt nanoparticle catalysts in n -hexane reforming
Catalytic activity and selectivity of n -hexane reforming are changed significantly by the surface acidic properties of the alumina support following halogen treatment.
Catalytic Oxidation of Propane over Palladium Alloyed with Gold: An Assessment of the Chemical and Intermediate Species
Understanding the catalytic oxidation of propane is important for developing catalysts not only for catalytic oxidation of hydrocarbons in emission systems but also for selective oxidation in the chemical processing industry. For palladium-based catalysts, little is known about the identification of the chemical or intermediate species involved in propane oxidation. We describe herein findings of an investigation of the catalytic oxidation of propane over supported palladium nanoalloys with different compositions of gold (Pd n Au 100–n ), focusing on probing the chemical or intermediate species on the catalysts in correlation with the bimetallic composition and the alloying phase structure. In addition to an enhanced catalytic activity, a strong dependence of the catalytic activity on the bimetallic composition was revealed, displaying an activity maximum at a Pd : Au ratio of 50 : 50 in terms of reaction temperature. This dependence is also reflected by its dependence on the thermochemical treatment conditions. While the activity for nanoalloys with n ~ 50 showed little change after the thermochemical treatment under oxygen, the activities for nanoalloys with n < 50 and n > 50 showed opposite trends. Importantly, this catalytic synergy is linked to the subtle differences of chemical and intermediate species which have been identified for the catalysts with different bimetallic compositions by in situ measurements using diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). For the catalytic oxidation of propane over the highly-active catalyst with a Pd : Au ratio of 50 : 50, the major species identified include acetate and bicarbonate, showing subtle differences in comparison with the identification of bicarbonate and formate for the catalyst with <50% Au (with a lower activity) and the absence of apparent species for the catalyst with >50% Au (activity is largely absent). The alloying of 50% Au in Pd is believed to increase the oxophilicity of Pd, which facilitates the first carbon–carbon bond cleavage and oxygenation of propane. Finally, the implications of the findings on the catalytic synergy of Pd alloyed with Au and the design of active Pd alloy catalysts are also discussed.
High-throughput oxygen chemical potential engineering of perovskite oxides for chemical looping applications
Chemical looping (CL) represents a versatile, emerging strategy for sustainable chemical and energy conversion. Designing metal oxide oxygen carriers with suitable redox properties remains one of the most critical challenges to CL due to the considerably different thermodynamic property requirements for different applications. Here, taking SrFeO 3–δ as a base-structure, this study seeks to rationally substitute its A- and/or B-site cations to tailor the equilibrium oxygen partial pressure over 20 orders of magnitude. 2401 Sr x A 1–x Fe y B 1–y O 3–δ perovskite-phase structures were investigated using high-throughput density functional theory (DFT) and 227, 273 high-entropy perovskites were screened via machine learning (ML). This significantly expands the materials design space. While most of the compositions predicted are new and nonobvious, 19 previously reported oxygen carriers, with excellent redox properties, were correctly identified by the algorithm. Moreover, we experimentally demonstrated 15 new oxygen carriers with superior redox performance. These results support the effectiveness of the high-throughput approaches for accelerated materials discovery.
Oxidative dehydrogenation of cyclohexene on atomically precise subnanometer Cu 4− n Pd n (0 ≤ n ≤ 4) tetramer clusters: the effect of cluster composition and support on performance
High fidelity selectivity tuning of the oxidative dehydrogenation of cyclohexene was achieved through the control of the atomic composition of CuPd clusters and their interactions with the support.
Assessing DER Network Cybersecurity Defences in a Power-Communication Co-Simulation Environment
Increasing penetrations of interoperable distributed energy resources (DER) in the electric power system are expanding the power system attack surface. Maloperation or malicious control of DER equipment can now cause substantial disturbances to grid operations. Fortunately, many options exist to defend and limit adversary impact on these newly-created DER communication networks, which typically traverse the public internet. However, implementing these security features will increase communication latency, thereby adversely impacting real-time DER grid support service effectiveness. In this work, a collection of software tools called SCEPTRE were used to create a co-simulation environment where SunSpec-compliant PV inverters were deployed as virtual machines and interconnected to simulated communication network equipment. Network segmentation, encryption, and moving target defence security features were deployed on the control network to evaluate their influence on cybersecurity metrics and power system performance. The results indicated that adding these security features did not impact DER-based grid control systems but improved the cybersecurity posture of the network when implemented appropriately.
Performance of Heterogeneous Algorithm Scheduling in CMSSW
The CMS experiment started to utilize Graphics Processing Units (GPU) to accelerate the online reconstruction and event selection running on its High Level Trigger (HLT) farm in the 2022 data taking period. The projections of the HLT farm to the High-Luminosity LHC foresee a significant use of compute accelerators in the LHC Run 4 and onwards in order to keep the cost, size, and power budget of the farm under control. This direction of leveraging compute accelerators has synergies with the increasing use of HPC resources in HEP computing, as HPC machines are employing more and more compute accelerators that are predominantly GPUs today. In this work we review the features developed for the CMS data processing framework, CMSSW, to support the effective utilization of both compute accelerators and many-core CPUs within a highly concurrent task-based framework. We measure the impact of various design choices for the scheduling of heterogeneous algorithms on the event processing throughput, using the Run-3 HLT application as a realistic use case.
On the origin of ultrafast nonradiative transitions in nitro-polycyclic aromatic hydrocarbons: Excited-state dynamics in 1-nitronaphthalene
The electronic energy relaxation of 1-nitronaphthalene was studied in nonpolar, aprotic, and protic solvents in the time window from femtoseconds to microseconds. Excitation at 340 or 360 nm populates the Franck-Condon S{sub 1}({pi}{pi}{sup *}) state, which is proposed to bifurcate into two essentially barrierless nonradiative decay channels with sub-200 fs lifetimes. The first main decay channel connects the S{sub 1} state with a receiver T{sub n} state that has considerable n{pi}{sup *} character. The receiver T{sub n} state undergoes internal conversion to populate the vibrationally excited T{sub 1}({pi}{pi}{sup *}) state in 2-4 ps. It is shown that vibrational cooling dynamics in the T{sub 1} state depends on the solvent used, with average lifetimes in the range from 6 to 12 ps. Furthermore, solvation dynamics competes effectively with vibrational cooling in the triplet manifold in primary alcohols. The relaxed T{sub 1} state undergoes intersystem crossing back to the ground state within a few microseconds in N{sub 2}-saturated solutions in all the solvents studied. The second minor channel involves conformational relaxation of the bright S{sub 1} state (primarily rotation of the NO{sub 2}-group) to populate a dissociative singlet state with significant charge-transfer character and negligible oscillator strength. This dissociative channel is proposed to be responsible for the observed photochemistry in 1-nitronaphthalene. Ground- and excited-state calculations at the density functional level of theory that include bulk and explicit solvent effects lend support to the proposed mechanism where the fluorescent S{sub 1} state decays rapidly and irreversibly to dark excited states. A four-state kinetic model is proposed that satisfactorily explains the origin of the nonradiative electronic relaxation pathways in 1-nitronaphthalene.
Optical properties of Mn-Co-Ni-O thin films prepared by radio frequency sputtering deposition
Mn{sub 1.4}Co{sub 1.0}Ni{sub 0.6}O{sub 4} (MCN) thin films are prepared by RF sputtering deposition method on amorphous Al{sub 2}O{sub 3} substrate. Microstructure and X-ray photoelectron spectroscopy analyses suggest improvements in crystallinity and stoichiometry for MCN films with post-annealed process. Infrared (IR) optical constants of the MCN films are obtained by IR spectroscopic ellipsometer (SE) in the range of 1500 cm{sup −1} to 3200 cm{sup −1} (2.8–6.7 μm). The derived effective charge supports the increase of the oxidation after annealing. The dielectric function of the films is also extracted by SE in the range of 300–1000 nm adopting a double Lorentz model together with a Tauc–Lorentz model. The mechanism in electronic transition process is discussed based on the variation observed in the optical absorption spectra of the as-grown and post-annealed samples. The optical absorption peaks located at 1.7 eV, 2.4–2.6 eV, and 3.5–4 eV are attributed to the charge-transfer transitions of 2p electrons of oxygen ions and 3d electrons of Mn and Co ions. Our results are very important to understand the optoelectronic mechanism and exploit applications of metal oxides.
Giant magnetoresistance in the cluster glass regime of Co-Ga alloys
A detailed study of low temperature electrical transport properties of Co{sub x}Ga{sub 100−x} (x = 54, 55.5, 57) alloy has been carried out. The origin of the resistivity anomalies and correlation between magnetic and electrical transport properties are identified through an elaborate analysis. The weak localization and enhanced electron-electron interaction effects partially support the electrical transport properties of the system. Further, the observed magnetoresistance can be well represented by localized model along with quantum corrections. The low temperature magnetoresistance value near critical composition is comparable to that reported in giant magnetoresistance materials.
A composite reactor with wetted-wall column for mineral carbonation study in three-phase systems
Despite the availability of various reactors designed to study gas-liquid reactions, no appropriate devices are available to accurately investigate triple-phased mineral carbonation reactions involving CO2 gas, aqueous solutions (containing divalent cations), and carbonate minerals. This report presents a composite reactor that combines a modified conventional wetted-wall column, a pH control module, and an attachment to monitor precipitation reactions. Our test and calibration experiments show that the absorption column behaved largely in agreement with theoretical predictions and previous observations. Experimental confirmation of CO2 absorption in NaOH and ethanolamine supported the effectiveness of the column for gas-liquid interaction. A test run in the CO2–NH3–MgCl2 system carried out for real time investigation of the relevant carbonation reactions shows that the reactor’s performance closely followed the expected reaction path reflected in pH change, the occurrence of precipitation, and the rate of NH3 addition, indicating the appropriateness of the composite device in studying triple-phase carbonation process.
Monitoring Stock-Specific Abundance, Run Timing, and Straying of Chinook Salmon in the Columbia River Using Genetic Stock Identification (GSI)
Abstract Genetic stock identification (GSI) provides a method of characterizing stock-specific abundance, run timing, and straying as they pertain to the population demographics and behavior of both hatchery and wild fish and thus assists with fisheries management. In this study, tissues were collected and genotyped at 13 microsatellite loci from adult Chinook Salmon Oncorhynchus tshawytscha that passed Bonneville Dam during four consecutive migration years (2004–2007). GSI methods were used to estimate the proportions of stocks in a broad genetic baseline, with high-density coverage of Chinook Salmon across the eastern Pacific Rim. The estimates of abundance for interior Columbia River stocks showed widespread decline consistent with a shift to poor ocean conditions during the years when the fish in this study were at sea, but divergent stock- and age-specific patterns were also observed. For example, the upper Columbia River spring-run stock experienced a unique net gain in abundance during this period, and the interior Columbia River summer–fall-run stock experienced a delayed decline of 4-year-olds. Stocks with early run timing shifted to later migrations. However, run timing distributions did not shift unidirectionally for all stocks across years, and stock membership in three major run timing categories was maintained. Of 9,215 total adults sampled, 27 (0.3%) were out-of-basin strays and a quarter of the strays were putatively of wild origin. The general concordance of GSI results with those based on more traditional methods supports the effectiveness of GSI as a tool for fisheries management. Received May 5, 2013; accepted October 23, 2013 Published online February 10, 2014
MAGNETIC TRANSPORT ON THE SOLAR ATMOSPHERE BY LAMINAR AND TURBULENT AMBIPOLAR DIFFUSION
The lower solar atmosphere consists of partially ionized turbulent plasmas harboring velocity field, magnetic field, and current density fluctuations. The correlations among these small-scale fluctuations give rise to large-scale flows and magnetic fields which decisively affect all transport processes. The three-fluid system consisting of electrons, ions, and neutral particles supports nonideal effects such as the Hall effect and ambipolar diffusion. Here, we study magnetic transport by the laminar- and turbulent-scale ambipolar diffusion processes using a simple model of the magnetic induction equation. Based on a linear analysis of the induction equation, we perform a one-dimensional numerical simulation to study the laminar ambipolar effect on medium-scale magnetic field structures. The nonlinearity of the laminar ambipolar diffusion creates magnetic structures with sharp gradients in the scale of hundreds of kilometers. We expect that these can be amenable to processes such as magnetic reconnection and energy release therefrom for heating and flaring of the solar plasma. Analyzing the characteristic timescales of these processes, we find that the turbulent diffusion timescale is smaller by several orders of magnitude than the laminar diffusion timescale. The effect of the modeled turbulent ambipolar diffusion on the obtained field structures is briefly discussed.
THE McGill PLANAR HYDROGEN ATMOSPHERE CODE (McPHAC)
The McGill Planar Hydrogen Atmosphere Code (McPHAC) v1.1 calculates the hydrostatic equilibrium structure and emergent spectrum of an unmagnetized hydrogen atmosphere in the plane-parallel approximation, at surface gravities appropriate for neutron stars. McPHAC incorporates several improvements over previous codes for which tabulated model spectra are available: (1) Thomson scattering is treated anisotropically, which is shown to result in a 0.2%-3% correction in the emergent spectral flux across the 0.1-5 keV passband; (2) the McPHAC source code is made available to the community, allowing it to be scrutinized and modified by other researchers wishing to study or extend its capabilities; and (3) the numerical uncertainty resulting from the discrete and iterative solution is studied as a function of photon energy, indicating that McPHAC is capable of producing spectra with numerical uncertainties <0.01%. The accuracy of the spectra may at present be limited to {approx}1%, but McPHAC enables researchers to study the impact of uncertain inputs and additional physical effects, thereby supporting future efforts to reduce those inaccuracies. Comparison of McPHAC results with spectra from one of the previous model atmosphere codes (NSA) shows agreement to {approx}<1% near the peaks of the emergent spectra. However, in the Wien tail a significant deficit of flux in the spectra of the previous model is revealed, determined to be due to the previous work not considering large enough optical depths at the highest photon frequencies. The deficit is most significant for spectra with T{sub eff} < 10{sup 5.6} K, though even there it may not be of much practical importance for most observations.
Magnetohydrostatic equilibrium structure and mass of filamentary isothermal cloud threaded by lateral magnetic field
Herschel observations have recently revealed that interstellar molecular clouds consist of many filaments. Polarization observations in optical and infrared wavelengths indicate that the magnetic field often runs perpendicular to the filament. In this article, we study the magnetohydrostatic configuration of isothermal gas in which the thermal pressure and the Lorentz force are balanced against the self-gravity, and the magnetic field is globally perpendicular to the axis of the filament. The model is controlled by three parameters: center-to-surface density ratio (ρ {sub c}/ρ {sub s}), plasma β of surrounding interstellar gas (β{sub 0}), and the radius of the hypothetical parent cloud normalized by the scale-height (R{sub 0}{sup ′}), although there remains freedom in how the mass is distributed against the magnetic flux (mass loading). In the case where R{sub 0}{sup ′} is small enough, the magnetic field plays a role in confining the gas. However, the magnetic field generally has the effect of supporting the cloud. There is a maximum line-mass (mass per unit length) above which the cloud is not supported against gravity. Compared with the maximum line-mass of a nonmagnetized cloud (2c{sub s}{sup 2}/G, where c{sub s} and G represent, respectively, the isothermal sound speed and the gravitational constant), that of the magnetized filament is larger than the nonmagnetized one. The maximum line-mass is numerically obtained as λ{sub max}≃0.24Φ{sub cl}/G{sup 1/2}+1.66c{sub s}{sup 2}/G, where Φ{sub cl} represents one half of the magnetic flux threading the filament per unit length. The maximum mass of the filamentary cloud is shown to be significantly affected by the magnetic field when the magnetic flux per unit length exceeds Φ{sub cl} ≳ 3 pc μG (c{sub s} /190 m s{sup –1}){sup 2}.
On extreme-ultraviolet helium line intensity enhancement factors on the sun
Helium lines in the solar EUV spectrum provide useful diagnostics of the solar atmosphere plasma. Helium is one of the few elements that exhibits strong emission lines formed in the lower transition region, and it is the second most abundant element in the Sun. However, the analysis of helium lines is complicated by their optical thickness and the unusual behavior of their intensities, with enhancements by a factor of up to 15 reported in the literature. Detailed study requires spatially and spectrally resolved observations in the EUV range, as well as sophisticated atomic modeling. The present work focuses on the application of the differential emission measure distribution to reproduce the observed fluxes of the He i and He ii lines observed by the Solar and Heliospheric Observatory (SOHO)/Coronal Diagnostic Spectrometer and Hinode/EIS spectrometers, using the latest atomic data. It is found that the comparison between observed and reconstructed intensities for He i resonance lines λλ537.03, 522.21, and 515.62 and the intercombination line λ591.41 does not show a real enhancement. By contrast, He i λ584.33, the first line of the 1s{sup 2} {sup 1}S−1s np {sup 1}P resonance series, shows a depletion of a factor ∼2, due to the opacity effect, as supported by non-LTE radiative transfer calculations. For single ionized helium lines 303.78 and 256.32 Å, the enhancement factors obtained are higher and agree with those of previous work. The different behavior of He i and He ii lines suggests a mechanism that affects ionized helium only.