Search NASA⌕ Search

SEARCH · Search NASA

Results for “System Study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

What Sets the Radial Locations of Warm Debris Disks?

The architectures of debris disks encode the history of planet formation in these systems. Studies of debris disks via their spectral energy distributions (SEDs) have found infrared excesses arising from cold dust, warm dust, or a combination of the two. The cold outer belts of many systems have been imaged, facilitating their study in great detail. Far less is known about the warm components, including the origin of the dust. The regularity of the disk temperatures indicates an underlying structure that may be linked to the water snow line. If the dust is generated from collisions in an exo-asteroid belt, the dust will likely trace the location of the water snow line in the primordial protoplanetary disk where planetesimal growth was enhanced. If instead the warm dust arises from the inward transport from a reservoir of icy material farther out in the system, the dust location is expected to be set by the current snow line. We analyze the SEDs of a large sample of debris disks with warm components. We find that warm components in single-component systems (those without detectable cold components) follow the primordial snow line rather than the current snow line, so they likely arise from exo-asteroid belts. While the locations of many warm components in two-component systems are also consistent with the primordial snow line, there is more diversity among these systems, suggesting additional effects play a role.

79 ASTRONOMY AND ASTROPHYSICS↗

Dynamics of disordered mechanical systems with large connectivity, free probability theory, and quasi-Hermitian random matrices

Disordered mechanical systems with high connectivity represent a limit opposite to the more familiar case of disordered crystals. Individual ions in a crystal are subjected essentially to nearest-neighbor interactions. In contrast, the systems studied in this paper have all their degrees of freedom coupled to each other. Thus, the problem of linearized small oscillations of such systems involves two full positive-definite and non-commuting matrices, as opposed to the sparse matrices associated with disordered crystals. Consequently, the familiar methods for determining the averaged vibrational spectra of disordered crystals, introduced many years ago by Dyson and Schmidt, are inapplicable for highly connected disordered systems. In this paper we apply random matrix theory (RMT) to calculate the averaged vibrational spectra of such systems, in the limit of infinitely large system size. At the heart of our analysis lies a calculation of the average spectrum of the product of two positive definite random matrices by means of free probability theory techniques. We also show that this problem is intimately related with quasi-hermitian random matrix theory (QHRMT), which means that the ‘hamiltonian’ matrix is hermitian with respect to a non-trivial metric. This extends ordinary hermitian matrices, for which the metric is simply the unit matrix. The analytical results we obtain for the spectrum agree well with our numerical results. The latter also exhibit oscillations at the high-frequency band edge, which fit well the Airy kernel pattern. We also compute inverse participation ratios of the corresponding amplitude eigenvectors and demonstrate that they are all extended, in contrast with conventional disordered crystals. Finally, we compute the thermodynamic properties of the system from its spectrum of vibrations. In addition to matrix model analysis, we also study the vibrational spectra of various multi-segmented disordered pendula, as concrete realizations of highly connected mechanical systems. A universal feature of the density of vibration modes, common to both pendula and the matrix model, is that it tends to a non-zero constant at vanishing frequency.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nationwide Buildings Energy Research enabled through an integrated Data Intensive Scientific Workflow and Advanced Analysis Environment

Modern workflow systems enable scientists to run ensemble simulations at unprecedented scales and levels of complexity, allowing them to study system sizes previously impossible to achieve, due to the inherent resource requirements needed for the modeling work. However as a result of these new capabilities the science teams suddenly also face unprecedented data volumes that they are unable to analyze with their existing tools and methodologies in a timely fashion. In this paper we will describe the ongoing development work to create an integrated data intensive scientific workflow and analysis environment that offers researchers the ability to easily create and execute complex simulation studies and provides them with different scalable methods to analyze the resulting data volumes. The integration of simulation and analysis environments is hereby not only a question of ease of use, but supports fundamental functions in the correlated analysis of simulation input, execution details and derived results for multi-variant, complex studies. To this end the team extended and integrated the existing capabilities of the Velo data management and analysis infrastructure, the MeDICi data intensive workflow system and RHIPE the R for Hadoop version of the well-known statistics package, as well as developing a new visual analytics interface for the result exploitation by multi-domain users. The capabilities of the new environment are demonstrated on a use case that focusses on the Pacific Northwest National Laboratory (PNNL) building energy team, showing how they were able to take their previously local scale simulations to a nationwide level by utilizing data intensive computing techniques not only for their modeling work, but also for the subsequent analysis of their modeling results. As part of the PNNL research initiative PRIMA (Platform for Regional Integrated Modeling and Analysis) the team performed an initial 3 year study of building energy demands for the US Eastern Interconnect domain, which they are now planning to extend to predict the demand for the complete century. The initial study raised their data demands from a few GBs to 400GB for the 3year study and expected tens of TBs for the full century.

99 GENERAL AND MISCELLANEOUS↗

Runtime Tracing of the Community Earth System Model: Feasibility Study and Benefits

The Community Earth System Model (CESM) is one of US's leading earth system modeling frameworks, which has decades of development history and was embraced by a large, active user community. In this paper, we first review the software development history of CESM and we explain the general objectives of performance analysis. Then we present an offline global community land model simulation within the CESM framework to demonstrate the procedure of runtime tracing of CESM using the Vampir toolset. Finally, we explain the benefits of runtime tracing to the general earth system modeling community. We hope those considerations can be beneficial to many other modeling research programs involving legacy high-performance computing applications.

42 ENGINEERING↗

A microfluidic flow-cell for the study of the ultrafast dynamics of biological systems

The study of biochemical dynamics by ultrafast spectroscopic methods is often restricted by the limited amount of liquid sample available, while the high repetition rate of light sources can induce photodamage. In order to overcome these limitations, we designed a high flux, sub-ml, capillary flow-cell. While the 0.1 mm thin window of the 0.5 mm cross-section capillary ensures an optimal temporal resolution and a steady beam deviation, the cell-pump generates flows up to ~0.35 ml/s that are suitable to pump laser repetition rates up to ~14 kHz, assuming a focal spot-diameter of 100 μm. In addition, a decantation chamber efficiently removes bubbles and allows, via septum, for the addition of chemicals while preserving the closed atmosphere. The minimal useable amount of sample is ~250 μl.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Hydropower Advantages over Batteries in Energy Storage of Off-Grid Systems: A Case Study

Microgrids are decentralized power production systems, where the energy production and consumption are very close to each other. Microgrids generally exploit renewable energy sources, encountering a problem of storage, as the power production from solar and wind is intermittent. This research presents a new integrated methodology and discusses a comparison of batteries and pumped storage hydropower (PSH) as energy storage systems with the integration of wind and solar PV energy sources, which are the major upcoming technologies in the renewable energy sector. We implemented the simulator and optimizer model (HOMER), which develops energy availability usage to obtain optimized renewable energy integration in the microgrid, showing its economic added value. Two scenarios are run with this model—one considers batteries as an energy storage technology and the other considers PSH—in order to obtain the best economic and technical results for the analyzed microgrid. The economic analysis showed a lower net present cost (NPC) and levelized cost of energy (LCOE) for the microgrid with PSH. The results showed that the microgrid with the storage of PSH was economical, with an NPC of 45.8 M€ and an LCOE of 0.379 €/kWh, in comparison with the scenario with batteries, which had an NPC of 95.2 M€ and an LCOE of 0.786 €/kWh. The role of storage was understood by differentiating the data into different seasons, using a Python model. Furthermore, a sensitivity analysis was conducted by varying the capital cost multiplier of solar PV and wind turbines to obtain the best optimal economic solutions.

Guruprasad, Prajwal↗

Kinetic Modeling of Biological Systems

The dynamics of how its constituent components interact define the spatio-temporal response of a natural system to stimuli. Modeling the kinetics of the processes that represent a biophysical system has long been pursued with the aim of improving our understanding of the studied system. Due to the unique properties of biological systems, in addition to the usual difficulties faced in modeling the dynamics of physical or chemical systems, biological simulations encounter difficulties that result from intrinsic multiscale and stochastic nature of the biological processes. This chapter discusses the implications for simulation of models involving interacting species with very low copy numbers, which often occur in biological systems and give rise to significant relative fluctuations. The conditions necessitating the use of stochastic kinetic simulation methods and the mathematical foundations of the stochastic simulation algorithms are presented. How the well-organized structural hierarchies often seen in biological systems can lead to multiscale problems, and possible ways to address the encountered computational difficulties are discussed. We present the details of the existing kinetic simulation methods, and discuss their strengths and shortcomings. A list of the publicly available kinetic simulation tools and our reflections for future prospects are also provided.

59 BASIC BIOLOGICAL SCIENCES↗

Thermodynamic model of a thermal storage air conditioning system with dynamic behavior

A thermodynamic model was developed to predict transient behavior of a thermal storage system, using phase change materials (PCMs), for a novel electric vehicle climate conditioning application. The main objectives of the paper are to consider the system's dynamic behavior, such as a dynamic air flow rate into the vehicle's cabin, and to characterize the transient heat transfer process between the thermal storage unit and the vehicle's cabin, while still maintaining accurate solution to the complex phase change heat transfer. The system studied consists of a heat transfer fluid circulating between either of the on-board hot and cold thermal storage units, which we refer to as thermal batteries, and a liquid-air heat exchanger that provides heat exchange with the incoming air to the vehicle cabin. Each thermal battery is a shell-and-tube configuration where a heat transfer fluid flows through parallel tubes, which are surrounded by PCM within a larger shell. The system model incorporates computationally inexpensive semianalytic solution to the conjugated laminar forced convection and phase change problem within the battery and accounts for airside heat exchange using the Number of Transfer Units (NTUs) method for the liquid-air heat exchanger. Using this approach, we are able to obtain an accurate solution to the complex heat transfer problem within the battery while also incorporating the impact of the airside heat transfer on the overall system performance. The implemented model was benchmarked against a numerical study for a melting process and against full system experimental data for solidification using paraffin wax as the PCM. Through modeling, we demonstrate the importance of capturing the airside heat exchange impact on system performance, and we investigate system response to dynamic operating conditions, e.g., air recirculation. (C) 2013 Elsevier Ltd. All rights reserved.

Fleming, E↗

Interactions of Aqueous U(VI) with Soil Minerals in Slightly Alkaline Natural Systems

Uranium (U) is a common contaminant at numerous surface and subsurface sites around the world. This paper covers some important aspects of the aqueous hexavalent uranium [U(VI)] interactions with soil minerals that are present in contaminated soils and sediments. The retention of U via interactions with soil minerals has significant consequences for the prediction of its short – and long – term behavior in soils and geological systems. Studies of the nature and type of these interactions have provided the necessary evidence for assessing the geochemical behavior of U in natural systems under different physical, biogeochemical, hydrological, and reducing or oxidizing conditions. Over the last 20 years, aqueous U(VI):solid phase interactions have been studied by geochemists, soil chemists, soil mineralogists and soil microbiologists, and the progress in some areas is remarkable. Although a mechanistic description and understanding of the complex interactions involving U and soil minerals of natural systems is currently impossible, results from carefully designed and executed experiments with these materials have improved our understanding of the heterogeneous system’s behavior and U contaminant mobility and transport. There are, however, areas that need further exploration and study. Numerous research publications were reviewed in this paper to present important findings coming out of the research, to reveal the current level of the understanding of the U(VI) interactions with soil minerals, and to provide ideas for future needs and research directions.

54 ENVIRONMENTAL SCIENCES↗

Electron emission in a source-collector sheath system: A kinetic study

The classical source-collector sheath system describes a plasma that forms between a Maxwellian source and an absorbing wall. The plasma is assumed to be collisionless and without ionization. Two distinct areas are being formed: the collector sheath, an ion-rich region in contact with the absorbing boundary, and the source sheath, which is an electron-rich area near the Maxwellian source. In this work, we study a modified version of the classical source-collector sheath system, where the wall is no longer absorbing but emits electrons. As a result, we have two different types of collector sheath, one where a potential well is formed and one without a potential well. We examine the effect of electron emission for a range of conditions for the plasma and the emitted electrons. In the first part of this work, we study the problem analytically, and in the second, using our kinetic Vlasov code, Yggdrasil. The simulation results are in very good agreement with the predictions of our theoretical model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of Few-Nucleon Systems with the CEBAF Large Acceptance Spectrometer

The study of few-nucleon systems at intermediate energies is an important aspect of the nuclear-physics program carried out by the CLAS Collaboration at Jefferson Laboratory. Our investigations aim at understanding the nuclear dynamics at short distances, the transition from hadronic to partonic description of nuclei, and how nuclei can be described in the framework of Quantum Chromodynamics. Our data on photodisintegration of {sup 3}He and {sup 4}He at beam energies from 0.3 GeV to 1.5 GeV strongly favor theoretical calculations that include three-body mechanisms and indicate significant contributions of these mechanisms at large momentum transfer, especially in the range of photon energies from 0.6 GeV to 0.8 GeV. Our investigations of exclusive and inclusive electron scattering off nuclear targets have yielded the determination of the ratio of pp to pn correlated pairs in {sup 3}He and of the probabilities of short-range correlations in nuclei. We have studied the transition from hadronic to partonic dynamics in nuclear processes by searching for the onset of scaling of the invariant cross sections of photoinduced reactions on few-nucleon systems. Our data are consistent with scaling at momentum transfer as low as 1 (GeV/c){sup 2}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Impact of subgrid-scale radiative heating variability on the stratocumulus-to-trade cumulus transition in climate models

Subgrid-scale interactions between turbulence and radiation are potentially important for accurately reproducing marine low clouds in climate models. To better understand the impact of these interactions, the Weather Research and Forecasting (WRF) model is configured for large eddy simulation (LES) to study the stratocumulus-to-trade cumulus (Sc-to-Cu) transition. Using the GEWEX Atmospheric System Studies (GASS) composite Lagrangian transition case and the Atlantic Trade Wind Experiment (ATEX) case, it is shown that the lack of subgrid-scale turbulence-radiation interaction, as is the case in current generation climate models, accelerates the Sc-to-Cu transition. Our analysis suggests that in cloud-topped boundary layers subgrid-scale turbulence-radiation interactions contribute to stronger production of temperature variance, which in turn leads to stronger buoyancy production of turbulent kinetic energy and helps to maintain the Sc cover.

Environmental Molecular Sciences Laboratory↗

Onymous early‐life performance degradation analysis of recent photovoltaic module technologies

Abstract The cost of photovoltaic (PV) modules has declined by 85% since 2010. To achieve this reduction, manufacturers altered module designs and bill of materials; changes that could affect module durability and reliability. To determine if these changes have affected module durability, we measured the performance degradation of 834 fielded PV modules representing 13 module types from 7 manufacturers in 3 climates over 5 years. Degradation rates ( Rd ) are highly nonlinear over time, and seasonal variations are present in some module types. Mean and median degradation rate values of −0.62%/year and −0.58%/year, respectively, are consistent with rates measured for older modules. Of the 23 systems studied, 6 have degradation rates that will exceed the warranty limits in the future, whereas 13 systems demonstrate the potential of achieving lifetimes beyond 30 years, assuming Rd trends have stabilized.

14 SOLAR ENERGY↗

Ab initio modeling of 2D layered organohalide lead perovskites

A number of 2D layered perovskites A{sub 2}PbI{sub 4} and BPbI{sub 4}, with A and B mono- and divalent ammonium and imidazolium cations, have been modeled with different theoretical methods. The periodic structures have been optimized (both in monoclinic and in triclinic systems, corresponding to eclipsed and staggered arrangements of the inorganic layers) at the DFT level, with hybrid functionals, Gaussian-type orbitals and dispersion energy corrections. With the same methods, the various contributions to the solid stabilization energy have been discussed, separating electrostatic and dispersion energies, organic-organic intralayer interactions and H-bonding effects, when applicable. Then the electronic band gaps have been computed with plane waves, at the DFT level with scalar and full relativistic potentials, and including the correlation energy through the GW approximation. Spin orbit coupling and GW effects have been combined in an additive scheme, validated by comparing the computed gap with well known experimental and theoretical results for a model system. Finally, various contributions to the computed band gaps have been discussed on some of the studied systems, by varying some geometrical parameters and by substituting one cation in another’s place.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantum computation of nanosheets in a background magnetic field for external control of nanosystems

We ran quantum simulations on lattices of interacting fermions in a background magnetic field [1]. We created discretized Hamiltonian matrices for each system and pre-processed them so that they could be read by the quantum simulator implemented in IBM's Qiskit package [2]. The simulator uses the variational quantum eigensolver (VQE) algorithm [3] to approximate the ground state energy of the input Hamiltonian, which is then compared to the classically-calculated exact value. This classical evaluation is possible because the systems studied are still within the grasp of classical computers. We also investigated ways to simplify the system before the pre-processing step. We found that in almost all cases these simplifications made our quantum calculations converge to better answers using simpler starting conditions. We are exploring other ways to interface with IBM's quantum computing software so that we no longer need to explicitly define the Hamiltonian matrices for our systems, a problem which will itself soon become intractable.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fabrication of Tantalum and Hafnium Carbide Fibers via Forcespinning TM for Ultrahigh‐Temperature Applications

In this work, a novel method for producing ultrafine tantalum and hafnium carbide fibers using the Forcespinning TM technique via a nonhalide‐based sol‐gel process was investigated. An optimal solution viscosity range was systematically determined via rheological studies of neat PAN/DMF as a function of fiber formation. Subsequently, Forcespinning TM parameters were also systemically studied to determine the optimal rotational velocity and spinneret‐to‐collecting rod distance required for ideal fiber formation. TaC and HfC fibers were synthesized via Forcespinning TM utilizing a mixture of PAN and refractory transition metal alkoxides (i.e., tantalum (V) ethoxide and hafnium (IV) tert‐butoxide) in DMF solution based on optimal conditions determined from the neat PAN/DMF. In all instances after calcination, powder X‐ray diffraction (PXRD) and energy dispersive spectroscopy (EDS) indicated that TaC and HfC fibers were produced. TGA/DSC confirmed the chemical stability of the resulting fibers.

Lee, Harold O.↗

Low temperature London penetration depth and superfluid density in Fe-based superconductors

The superconducting gap symmetry of the Fe-based superconductors was studied by measurements and analysis of London penetration depth and super uid density. Tunnel diode resonator technique for these measurements was implemented in a dilution refrigerator allowing for the temperatures down to 50 mK. For the analysis of the super uid density, we used both experimental studies of Al-coated samples and original thermodynamic approach based on Rutgers relation. In three systems studied, we found that the superconducting gap at the optimal doping is best described in multi-gap full gap scenario. By performing experiments on samples with arti cially introduced disorder with heavy ion irradiation, we show that evolution of the superconducting transition temperature and of the super uid density are consistent with full-gap sign changing s superconducting state. The superconducting gap develops strong modulation both in the under-doped and the over-doped regimes. In the terminal hole-doped KFe{sub 2}As{sub 2}, both temperature dependence of the super uid density and its evolution with increase of the scattering rate are consistent with symmetry imposed vertical line nodes in the superconducting gap. By comparative studies of hole-doped (Ba,K)Fe{sub 2}As{sub 2} and electron-doped Ca10-3-8, we show that the superconducting gap modulation in the under-doped regime is intrinsic and is not induced by the coexisting static magnetic order.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Radiography Capabilities for Matter-Radiation Interactions in Extremes

The Matter-Radiation Interactions in Extremes (MaRIE) experimental facility will be used to discover and design the advanced materials needed to meet 21st century national security and energy security challenges. This new facility will provide the new tools scientists need to develop next-generation materials that will perform predictably and on-demand for currently unattainable lifetimes in extreme environments. The MaRIE facility is based on upgrades to the existing LANSCE 800-MeV proton linac and a new 12-GeV electron linac and associated X-ray FEL to provide simultaneous multiple probe beams, and new experimental areas. In addition to the high-energy photon probe beam, both electron and proton radiography capabilities will be available at the MaRIE facility. Recently, detailed radiography system studies have been performed to develop conceptual layouts of high-magnification electron and proton radiography systems that can meet the experimental requirements for the expected first experiments to be performed at the facility. A description of the radiography systems, their performance requirements, and a proposed facility layout are presented.

43 PARTICLE ACCELERATORS↗