Search NASA⌕ Search

SEARCH · Search NASA

Results for “TELEVISION CAMERAS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Electronic heterodyne recording of interference patterns

An electronic heterodyne technique is being investigated for video (i.e., television rate and format) recording of interference patterns. In the heterodyne technique electro-optic modulation is used to introduce a sinusoidal phase shift between the beams of an interferometer. For phase modulation frequencies between 0.1 and 15 MHz an image dissector camera may be used to scan the resulting temporally modulated interference pattern. Heterodyne detection of the camera output is used to selectively record the interference pattern. An advantage of such synchronous recording is that it permits recording of low-contrast fringes in high ambient light conditions. The application of this technique to the recording of holograms is discussed.

Merat, F. L.↗

Mariner 9 television calibration - Revisited

Mariner 9 TV data from the 1971-1972 encounter with Mars, which contain good synoptic coverage of of the planet as well as the highest-resolution images thus far obtained for the south polar region, can lead to more accurate photometric analysis if subjected to improved processing methods. While calibration errors are rather greater than those of the Viking Orbiter cameras, both calibration data and processing software applicable to an improvement program have become available through the USGS's Planetary Image Cartography System.

Herkenhoff, Ken E.↗

Apollo 15 mission. Temporary loss of command module television picture

An investigation was made into the temporary loss of command module color television picture by the ground station converter at Mission Control Center. Results show the picture loss was caused by a false synchronization pulse that resulted from the inability of the black level clipping circuit to respond adequately to the video signal when bright sunlight suddenly entered the camera's field of view.

Source record↗

Payload operation television system

The TV system assembled is intended for laboratory experimentation which would develop operational techniques and lead to the design of space-borne TV equipment whose purpose would be to assist the astronaut-operator aboard a space station to load payload components. The TV system assembled for this program is a black and white, monocular, high performance system. The equipment consists principally of a good quality TV camera capable of high resolving power; a TV monitor; a sync generator for driving camera and monitor; and two pan/tilt units which are remotely controlled by the operator. One pan/tilt unit provides control of the pointing of the camera, the other similarly controls the position of a simulated payload.

Source record↗

Mariner 9 - Image processing and products.

The purpose of this paper is to describe the system for the display, processing, and production of image-data products created to support the Mariner 9 Television Experiment. Of necessity, the system was large in order to respond to the needs of a large team of scientists with a broad scope of experimental objectives. The desire to generate processed data products as rapidly as possible, coupled with the complexities introduced by the nature of the vidicon camera, greatly increased the scale of the ground-image processing effort. This paper describes the systems that carried out the processes and delivered the products necessary for real-time and near-real-time analyses. References are made to the computer algorithms used for the different levels of decalibration and analysis.

Levinthal, E. C.↗

Oak Ridge Site Specific Advisory Board Adapts To Engage - 16459

Environmental Management (EM) Site Specific Advisory Boards (SSABs) are representative of their communities and exist for the purpose of advising DOE EM. As such they are the conduits between the public and the DOE EM. To remain relevant to the community they cannot exist in a vacuum and the public needs to be aware of the Boards' function, purpose, and progress and have opportunities for input. Since the SSABs generally deal with fairly complex issues related to environmental cleanup, and the members of the Boards represent a diversity of background, there are many challenges associated with informing and eliciting input from Board members as well as informing and engaging the public. To that end, Oak Ridge SSAB (ORSSAB) has instituted changes to facilitate Board and public engagement. As the ORSSAB has matured and the work has become routine, it has become a challenge to keep members interested and invested. So the Board asks its members to provide input on how to make the process better. Through our annual member surveys and facilitated meetings, we query the board for ideas, and the results of these surveys and meetings are discussed at the annual planning meetings. Agreed changes are instituted in the following year. Recently the ORSSAB has instituted positive changes in the meeting structure, locations, and content. There are fewer formal meetings and these meetings are shorter. The board has also incorporated field trips to specific sites prior to presentations on those areas to further enhance membership understanding of the problems at hand, site conditions, and enormity and scope of the work to be undertaken. Changes of meeting location have occurred. Instead of the standard meeting room, the ORSSAB has met at local restaurants (in private rooms) where food service is available, and the atmosphere is more relaxed and informal. This gives members an opportunity to interact with each other rather than sitting in designated places at a formal meeting with video cameras rolling. Not only are the members more at ease, the presenters are more relaxed in their response to questions. Open discussion sessions have also been added to the meeting agendas. The ORSSAB participates in both public outreach and public engagement. Public outreach activities have included: presentations to local citizens groups; televising meetings on public access cable channels in three local communities; publishing The Advocate, a quarterly newsletter; and recently setting up and maintaining a Facebook page. Activities related to public engagement included the Board's participation at a DOE-sponsored community budget workshop. The ORSSAB strives for value and relevancy, attempting to convey a clear message to the community and to DOE. It also strives to inform its membership in a way that allows for clarity of understanding, and above all it tries to be enjoyable to its membership. The ORSSAB listens to its membership and has evolved its process to allow for effective advocacy. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Planetary investigation utilizing an imaging spectrometer system based upon charge injection technology

An intrinsic silicon charge injection device (CID) television sensor array has been used in conjunction with a CaMoO4 colinear tunable acousto optic filter, a 61 inch reflector, a sophisticated computer system, and a digital color TV scan converter/computer to produce near IR images of Saturn and Jupiter with 10A spectral resolution and approximately 3 inch spatial resolution. The CID camera has successfully obtained digitized 100 x 100 array images with 5 minutes of exposure time, and slow-scanned readout to a computer. Details of the equipment setup, innovations, problems, experience, data and final equipment performance limits are given.

Wattson, R. B.↗

Wide-Angle, Wide-Band Camera for Remote Imaging

Improved ultraviolet-to-infrared camera design combines high resolution and relatively wide field of view in remote-imaging system. Although design intended for satellite-borne system to give information on such Earth features as vegetation, pollution, and land formation mineral deposits, optical principle also useful in ground-based or airborne high-resolution television for imaging objects at great distances.

Atcheson, P. D.↗

Television applications of interline-transfer CCD arrays

The design features and characteristics of interline transfer (ILT) CCD arrays with 190 x 244 and 380 x 488 image elements are reviewed, with emphasis on optional operating modes and system application considerations. It was shown that the observed horizontal resolution for a TV system using an ILT image sensor can approach the aperture response limit determined by photosensor site width, resulting in enhanced resolution for moving images. Preferred camera configurations and read out clocking modes for maximum resolution and low light sensitivity are discussed, including a very low light level intensifier CCD concept. Several camera designs utilizing ILT-CCD arrays are described. These cameras demonstrate feasibility in applications where small size, low-power/low-voltage operation, high sensitivity and extreme ruggedness are either desired or mandatory system requirements.

Hoagland, K. A.↗

Prototype color field sequential television lens assembly

The design, development, and evaluation of a prototype modular lens assembly with a self-contained field sequential color wheel is presented. The design of a color wheel of maximum efficiency, the selection of spectral filters, and the design of a quiet, efficient wheel drive system are included. Design tradeoffs considered for each aspect of the modular assembly are discussed. Emphasis is placed on achieving a design which can be attached directly to an unmodified camera, thus permitting use of the assembly in evaluating various candidate camera and sensor designs. A technique is described which permits maintaining high optical efficiency with an unmodified camera. A motor synchronization system is developed which requires only the vertical synchronization signal as a reference frequency input. Equations and tradeoff curves are developed to permit optimizing the filter wheel aperture shapes for a variety of different design conditions.

Source record↗

Application of narrow-band television to industrial and commercial communications

The development of narrow-band systems for use in space systems is presented. Applications of the technology to future spacecraft requirements are discussed along with narrow-band television's influence in stimulating development within the industry. The transferral of the technology into industrial and commercial communications is described. Major areas included are: (1) medicine; (2) education; (3) remote sensing for traffic control; and (5) weather observation. Applications in data processing, image enhancement, and information retrieval are provided by the combination of the TV camera and the computer.

Embrey, B. C., Jr.↗

Mariner 9 - Image processing and products.

The purpose of this paper is to describe the system for the display, processing, and production of image data products created to support the Mariner 9 Television Experiment. Of necessity, the system was large in order to respond to the needs of a large team of scientists with a broad scope of experimental objectives. The desire to generate processed data products as rapidly as possible to take advantage of adaptive planning during the mission, coupled with the complexities introduced by the nature of the vidicon camera, greatly increased the scale of the ground image processing effort. This paper describes the systems that carried out the processes and delivered the products necessary for real-time and near-real-time analyses. References are made to the computer algorithms used for the different levels of decalibration and analysis.

Levinthal, E. C.↗

A microprocessor application in the MTV telemetry data processor

An engineering model of the Telemetry Data Processor monitoring and display system used by the Maneuverable Television (MTV) employed in remote inspections of the Space Shuttle has been developed, incorporating the MC 6809 microprocessor. The system acquires analog and digital signals from the MTV flyer and converts them into engineering units, formatting them in several pages according to their function. Upon request, a data page can be superimposed on the video signal from the MTV camera. In addition, the system monitors key parameters for out-of-limit conditions and flashes caution and warning messages on the selected page.

Spahn, C. J.↗

The control network of Mars: April 1991

The modern geodetic control network of Mars was first established based on Mariner 9 images with 1-2 km/pixel resolutions and covered almost the entire Martian surface. The introduction of higher resolution (10-200 meter/pixel) Viking Orbiter images greatly improved the accuracy and density of points in the control network. Analysis of the Viking Lander radio tracking data led to more accurate measurements of Mars' rotation period, spin axis direction, and the lander coordinates relative to the inertial reference frame. The prime meridian on Mars was defined by the Geodesy/Cartography Group of the Mariner 9 Television Team as the crater Airy-0, located about 5 degrees south of the equator. The Viking 1 Lander site was identified on a high resolution Viking frame. The control point measurements form the basis of a least squares solution determined by analytical triangulation after the pixel measurements are corrected for geometric distortions and converted to millimeter coordinates in the camera focal plane. Photogrammetric strips encircling Mars at the equator and at 60 degree north south were used to strengthen the overall net and improve the accuracy of the coordinates of points. In addition, photogrammetric strips along 0, 90, 180, and 270 degrees longitude to the Viking 1 Lander site have all significantly strengthened the control network. Most recently, photogrammetric strips were added to the net along 30 degrees north latitude between 0 and 180 degrees, and along 30 degrees between 180 and 360 degrees. The Viking 1 Lander site and Airy-0 are linked through photogrammetric strips occurring along the 0 degree meridian from Airy-0 to 65 degrees north, from that point through the Viking 1 Lander site to the equator, and along the equator to 180 degrees longitude. The Viking 1 lander site is thus a well calibrated area with coordinates of points accurate to approximately 200 meters relative to the J2000 inertial coordinate system. This will be a useful calibration region for upcoming missions. The current status of the control network calculations is presented.

Davies, Merton E.↗

An acoustic charge transport imager for high definition television applications

The primary goal of this research is to develop a solid-state television (HDTV) imager chip operating at a frame rate of about 170 frames/sec at 2 Megapixels/frame. This imager will offer an order of magnitude improvements in speed over CCD designs and will allow for monolithic imagers operating from the IR to UV. The technical approach of the project focuses on the development of the three basic components of the imager and their subsequent integration. The camera chip can be divided into three distinct functions: (1) image capture via an array of avalanche photodiodes (APD's); (2) charge collection, storage, and overflow control via a charge transfer transistor device (CTD); and (3) charge readout via an array of acoustic charge transport (ACT) channels. The use of APD's allows for front end gain at low noise and low operating voltages while the ACT readout enables concomitant high speed and high charge transfer efficiency. Currently work is progressing towards the optimization of each of these component devices. In addition to the development of each of the three distinct components, work towards their integration and manufacturability is also progressing. The component designs are considered not only to meet individual specifications but to provide overall system level performance suitable for HDTV operation upon integration. The ultimate manufacturability and reliability of the chip constrains the design as well. The progress made during this period is described in detail.

Hunt, W. D.↗

STS-73 Flight Day 6

On this sixth day of the STS-73 sixteen day mission, the crew Cmdr. Kenneth Bowersox, Pilot Kent Rominger, Payload Specialists Albert Sacco and Fred Leslie, and Mission Specialists Kathryn Thornton, Catherine 'Cady' Coleman, and Michael Lopez-Alegria are shown performing several of the spaceborne experiments onboard the United States Microgravity Lab-2 (USML-2). The experiments shown include the Protein Crystal Growth (PCG) experiment, the Astroculture(tm)(ASC) experiment, the Drop Physics Module (DPM) experiment, and the Surface Tension Driven Convection Experiment (STDCE). The High-Packed Digital Television (HI-PAC) system is further tested and an in-orbit interview with Lopez-Alegria by NBC Nightside is conducted. The entire flightcrew salutes the 5th game of the World Series between the Atlanta Braves and Cleveland Indians by pretending to throw out the first ball of the game through a downlink to the stadium. Earth views taken from the payload bay cameras include some cloud cover, oceans, land masses, and the Nile River and the Red Sea.

Source record↗

Radiation sensitivity of silicon imaging sensors on missions to the outer planets.

Review of the results of an investigation of the magnitude of the degradation effects of radiation on the operating characteristics of camera tubes using silicon diode arrays in the space environment, and discussion of the radiation damage mechanisms concerned. The effects produced by bombardment of bare-silicon-diode arrays or vidicon tubes with 85-kV X rays, Cobalt 60 gamma rays, 1 MeV and 11 MeV electrons, 3 MeV and 142 MeV protons, and reactor neutrons are presented. Interference effects produced by radiation bombardment during operation of television tubes are investigated, and limiting fluxes of electrons and protons are given.

Brucker, G. J.↗

Space Shuttle glow observations

Photographic and television observations made during the third flight of the Space Shuttle in March 1982 reveal the presence of a diffuse optical emission surrounding surfaces of the vehicle exposed to the atmosphere in the ram direction. The line of sight intensity of this emission is comparable to that of airglow emissions seen at the limb of the earth and competes with the brightness of stars seen within the field of view of the photographic and TV cameras. The glow emission appears to be a manifestation of an atmosphere-vehicle interaction. Light from vehicle thruster operations was also seen, as well as the optical emissions resulting from the operation of a 100 mA electron beam.

Banks, P. M.↗