Search NASA⌕ Search

SEARCH · Search NASA

Results for “Transonic wind tunnel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

High Reynolds number tests of a C-141A aircraft semispan model to investigate shock-induced separation

Results from a high Reynolds number transonic wind tunnel investigation are presented. Wing chordwise pressure distributions were measured over a matrix of Mach numbers and angles-of-attack for which shock-induced separations are known to exist. The range of Reynolds number covered by these data nearly spanned the gap between previously available wind tunnel and flight test data. The results are compared with both flight and low Reynolds number data, and show that use of the semispan test technique produced good correlation with the prior data at both ends of the Reynolds number range, but indicated strong sensitivity to details of the test setup.

Blackerby, W. T.↗
NASA NTRS1975

Transonic aerodynamic characteristics of a wing/body combination incorporating jet flaps

A 0.25-scale semispan wing/body model with two types of jet flaps was tested in the Ames 11- by 11-Foot Transonic Wind Tunnel. The objective of that testing was to measure the static aerodynamic forces and moments and wing pressure distributions on six configurations differentiated by wing camber, jet flap type, and jet flap angle. Maximum thrust coefficients were limited to 0.12. Angle of attack was varied from -4 deg to 15 deg for Mach numbers between 0.6 and 0.95 at a constant unit Reynolds number of 18.0 million/m (5.5 million/ft). More refined designs and considerably more testing will be required to establish the practicability of the total-exhausting jet flap concept.

Holmberg, J. L.↗
NASA NTRS1976

Utilization of the AEDC three-dimensional potential flow computer program

A potential flow computer program which has been in use for several years, was discussed. This program has been used primarily as a tool for flow-field analysis in support of test activities in transonic wind tunnels. Analyses have been made over a Mach number range from 0 to 0.9 for a variety of configurations from aircraft to wind tunnels, with excellent agreement between calculated flow fields and measured wind tunnel data. Analytical and experimental data for seven different flow analysis problems are presented in this paper.

Palko, R. L.↗
NASA NTRS1976

Transonic stability and control characteristics of a 0.015 scale model 69-0 of the space shuttle orbiter with forebody RSI modification in the NASA/LaRC 8 foot TPT (LA72)

Tests were conducted in the NASA/LaRC 8 foot transonic wind tunnel from March 26 through 31, 1976. The model was a 0.015 scale SSV Orbiter with forebody modifications to simulate slight reductions in the reusable surface insulation (RSI) thickness. Six component aerodynamic force and moment data were obtained at Mach numbers from 0.35 to 1.20 over an angle of attack range from -2 deg to 20 deg at sideslip angles of 0 deg and 5 deg.

Ball, J. W.↗
NASA NTRS1977

Investigation of Inlet Concepts for Maneuver Improvement at Transonic Speeds

A 15 percent scale lightweight fighter type inlet forebody was tested in the Ames 14 foot transonic wind tunnel at Mach numbers of 0.7, 0.9, and 1.04. The inlet was a two dimensional horizontal ramp system designed for a Mach number of 2.2. Four inlet devices designed to prevent or delay cowl-lip boundary layer separation or to improve the inlet internal flow characteristics at high angles of attack were investigated. The devices used to control cowl-lip separation consisted of cowl leading edge flaps, slotted flaps, and tangential blowing. To improve the internal flow characteristics, discrete jet nozzle flows were directed downstream and parallel to the duct surface in the subsonic diffuser to energize the wall boundary layer. The discrete jets used in the subsonic diffuser were also tested in combination with each of the cowl leading edge devices. Test measurements included engine-face total pressure recovery, steady state distortion, dynamic distortion, duct boundary layer profiles, and duct-surface static pressures.

Latham, E.↗
NASA NTRS1977

Measurements of surface-pressure and wake-flow fluctuations in the flow field of a whitcomb supercritical airfoil

Measurements of surface pressure and wake flow fluctuations were made as part of a transonic wind tunnel investigation into the nature of a supercritical airfoil flow field. Emphasis was on a range of high subsonic Mach numbers and moderate lift coefficients corresponding to the development of drag divergence and buffeting. Fluctuation data were analyzed statistically for intensity, frequency content, and spatial coherence. Variations in these parameters were correlated with changes in the mean airfoil flow field.

Roos, F. W.↗
NASA NTRS1976

Computation of wave drag for transonic flow

The paper develops a method for calculating wave drag for two-dimensional transonic flow, with particular application to the prediction of the drag rise Mach number of a supercritical wing section. The method is based on a transonic similarity model which is defined by a normalized small perturbation equation and represents shock waves by the addition of an artificial viscosity term in the region of supersonic flow to the partial differential equation. The drag formula obtained allows the computer simulation of transonic wind tunnel data taking account of boundary layer and wall effects.

Garabedian, P. R.↗
NASA NTRS1977

Aerodynamic characteristics of an F-8 aircraft configuration with a variable camber wing at Mach numbers from 0.70 to 1.15

A 0.1-scale model of an F-8 aircraft was tested in the Ames 14-Foot Transonic Wind Tunnel at Mach numbers from 0.7 to 1.15. Angle of attack was varied from -2 deg. to 22 deg. at sideslip angles of 0 deg and -5 deg. Reynolds number, dictated by the atmospheric stagnation pressure, varied with Mach number from 3.4 to 4.0 million based on mean aerodynamic chord. The model was configured with a wing designed to simulate the downward deflection of the leading and trailing edges of an advanced-technology-conformal-variable camber wing. This wing was also equipped with conventional (simple hinge) flaps. In addition, the model was tested with the basic F-8 wing to provide a reference for extrapolating to flight data. In general, at all Mach numbers the use of conformal flap deflections at both the leading edge and trailing edge resulted in slightly higher maximum lift coefficients and lower drag coefficients than with the use of simple hinge flaps. There were also found to be small improvements in the pitching-moment characteristics with the use of conformal flaps.

Boltz, F. W.↗
NASA NTRS1977

Two-dimensional oscillating airfoil test apparatus

A two-dimensional oscillating airfoil test apparatus is presented as a method of measuring unsteady aerodynamic forces on an airfoil or rotor blade section. The oscillating airfoil test rig, which was built for use in NASA Ames Research Center's 11x11-foot Transonic Wind Tunnel (speed range M = 0.4 - 1.4), allows determination of unsteady loadings and detailed pressure distributions on representative airfoil sections undergoing simulated pitching and flapping motions. The design details of the motion generating system and supporting structure are presented.

Gibson, F. L.↗
NASA NTRS1977

Instrumentation complex for Langley Research Center's National Transonic Facility

The instrumentation discussed in the present paper was developed to ensure reliable operation for a 2.5-meter cryogenic high-Reynolds-number fan-driven transonic wind tunnel. It will incorporate four CPU's and associated analog and digital input/output equipment, necessary for acquiring research data, controlling the tunnel parameters, and monitoring the process conditions. Connected in a multipoint distributed network, the CPU's will support data base management and processing; research measurement data acquisition and display; process monitoring; and communication control. The design will allow essential processes to continue, in the case of major hardware failures, by switching input/output equipment to alternate CPU's and by eliminating nonessential functions. It will also permit software modularization by CPU activity and thereby reduce complexity and development time.

Russell, C. H.↗
NASA NTRS1978

A parametric experimental study of the slotted-wall boundary condition

An experimental study of slotted upper and lower walls in a two dimensional transonic wind tunnel with solid sidewalls is reported. Results are presented for several slot spacings and slot openness ratios. The experimental data were pressure measurements which were made on an airfoil model and on a sidewall near one of the slotted walls. The slotted-wall boundary condition coefficient, which related the pressure and streamline curvature near the wall, was determined from the wall pressure measurements. The measured wall-induced interference was correlated with the experimental values for the boundary condition coefficient. This correlation was compared with theory.

Everhart, J. L.↗
NASA NTRS1978

A new two-dimensional oscillating wing apparatus for unsteady aerodynamics research

An apparatus for experimental research into unsteady transonic flows is described. The apparatus, as installed in the NASA-Ames 11 by 11 Foot Transonic Wind Tunnel, can impart full two-degree-of-freedom motions at reduced frequencies to 0.3, oscillatory amplitudes to tn-2 degs, mean angles to 12 degs, Mach numbers to 1.4 and Reynolds numbers to 12x10. The test wing is fully instrumented for dynamic waveform measurements and the data can be acquired, processed, and displayed in real-time with a new computational data acquisition system. Following a description of the apparatus, sample data from a recently completed test program is presented.

Davis, S. S.↗
NASA NTRS1977

Two-dimensional oscillating airfoil test apparatus

A two dimensional oscillating airfoil test apparatus is presented as a method of measuring unsteady aerodynamic forces on an airfoil or rotor blade section. The oscillating airfoil test rig, which is being built for use in an 11 X 11-foot transonic wind tunnel (speed range M = 0.4 - 1.4), will allow determination of unsteady loadings and detailed pressure distributions on representative airfoil sections undergoing simulated pitching and flapping motions. The design details of the motion generating system and supporting structure are presented. This apparatus is now in the construction phase.

Gibson, F. L.↗
NASA NTRS1980

Application of numerical optimization to the design of wings with specified pressure distributions

A practical procedure for the optimum design of transonic wings is demonstrated. The procedure uses an optimization program based on the method of feasible directions coupled with an aerodynamic analysis program which solves the three-dimensional potential equation for subsonic through transonic flow. Two new wings for the A-7 aircraft were designed by using the optimization procedure to achieve specified surface pressure distributions. The new wings, along with the existing A-7 wing, were tested in the Ames 11 ft transonic wind tunnel. The experimental data show that all of the performance goals were met. However, comparisons of the wind tunnel results with the theoretical predictions indicate some differences at conditions for which strong shock waves occur.

Haney, H. P.↗
NASA NTRS1980

Experimental unsteady aerodynamics of conventional and supercritical airfoils

Experimental data on the unsteady aerodynamics of oscillating airfoils in transonic flow are presented. Two 0.5 m-chord airfoil models - an NACA 64A010 and an NLR 7301 - were tested in the NASA-Ames 11 by 11 foot Transonic Wind Tunnel at Mach numbers to 0.85, at chord Reynolds numbers to 12 million and at mean angles of attack to 4 deg. The airfoils were subjected to both pitching and plunging motions at reduced frequencies to 0.3 (physical frequencies to 53 Hz). The new hardware and the extensive use of computer-experiment integration developed for this test are described. The geometrical configuration of the model and the test arrangement are described in detail. Mean and first harmonic data are presented in both tabular and graphical form to aid in comparisons with other data and with numerical computations.

Davis, S. S.↗
NASA NTRS1981

Aerodynamic measurements concerned with a turret model

An experimental investigation was carried out in the 14 by 14 ft Ames transonic wind tunnel on a turret model. The aerodynamic parameters measured were steady and unsteady pressures (static and total fluid pressures), local mean velocities, and local mean densities at selected locations along the optical beam path for the azimuth look angles of 90, 120, and 150 degrees from the turret. The test stream Mach numbers considered are 0.55, 0.65 and 0.75, and the Reynolds number per meter is in the range of 10 million. The results indicate that severe optical degradation can be expected at aft look azimuth, angles, this degradation in optical performance increases as the azimuth angle is increased. The ratio of rms static pressure to the local mean static pressure peaks in the range of 0.07 to 0.12 and the ratio of rms total pressure to the local mean total pressure peaks in the range of 0.02 to 0.04. These values depend on the Mach number and the aft look azimuth angle. The scale lengths obtained from correlation considerations are also presented.

Raman, K. R.↗
NASA NTRS1980

Cryogenic Technology, part 2

Proceedings of a conference on the cryogenic technology developed in support of a transonic wind tunnel are given. Papers address tunnel instrumentation and mode/sting technology.

Source record↗