Search NASA⌕ Search

SEARCH · Search NASA

Results for “Uplink”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Two-way coherent Doppler error due to solar corona

Two-way coherent Doppler errors resulting from phase scintillations induced on the uplink by the solar corona are considered. It is shown that this error can be estimated by taking statistics on the differential Doppler measurements. Typical estimates for the error are given for four Sun-Earth-probe angles and for integration times ranging from 1 second to 1 minute. These results are based on data collected during the 1985 Voyager 2 conjunction.

Kinman, P. W.↗
NASA NTRS1989

Microwave time delays for the X/S-band feed system at X-band

The X-band time delays for the X/S feed system of the 34-meter high efficiency antenna are required to refine current X-band downlink (8450 plus or minus 50 MHz) calibrations and prepare for the Magellan uplink (7190 plus or minus 45 MHz). The time delays of elements in the X-band feed system are obtained mostly via computer calculation and partly via measurement. The methods used and results obtained are presented. There is good agreement with theory.

Chen, J.↗
NASA NTRS1989

The DSS-14 C-band exciter

The development and implementation of a C-band exciter for use with the Block IV Receiver-Exciter Subsystem at Deep Space Station 14 (DSS-14) has been completed. The exciter supplements the standard capabilities of the Block IV system by providing a drive signal for the C-band transmitter while generating coherent translation frequencies for C-band (5-GHz) to S-band (2.2- to 2.3-GHz) Doppler extraction, C-band to L-band (1.6-GHz) zero delay measurements, and a level calibrated L-band test signal. Exciter functions are described, and a general explanation and description of the C-band uplink controller is presented.

Rowan, D. R.↗
NASA NTRS1988

A new multi-mission data system for space flight support through the 1990's

The Space Flight Operations Center (SFOC) is described with attention given to historical and technical aspects. The SFOC is designed to support each new JPL mission with all of its mission-unique processing as a ready adaptation of some set of baseline capabilities. Another goal of the SFOC is to allow the migration of current older JPL missions from their current systems that use aging and costly hardware and software to newer systems with similar functionality. Upon its completion, the planned support includes both downlink and uplink processing for a projected six mission set.

Gainsborough, A. J.↗
NASA NTRS1988

Data system overview

The data system architecture design philosophy for 'SFOC', which is a large-scale distributed system for support of current and future space missions at the JPL, stresses 'design for change' standardization that will permit software-reuse, periodic hardware-changeout, and network-configuration evolution. Multimission capabilities are supported through a buildup of the baseline system with a minimum of special-purpose adaptations. SFOC can accommodate multiple users representing multiple disciplines, and is capable of furnishing near-real time and nonrealtime support to end-users for downlink (telemetry) and uplink (command) functions.

Kahr, Joseph R.↗
NASA NTRS1989

GOES I/M image navigation and registration

Image Navigation and Registration (INR) is the system that will be used on future Geostationary Operational Environmental Satellite (GOES) missions to locate and register radiometric imagery data. It consists of a semiclosed loop system with a ground-based segment that generates coefficients to perform image motion compensation (IMC). The IMC coefficients are uplinked to the satellite-based segment, where they are used to adjust the displacement of the imagery data due to movement of the imaging instrument line-of-sight. The flight dynamics aspects of the INR system is discussed in terms of the attitude and orbit determination, attitude pointing, and attitude and orbit control needed to perform INR. The modeling used in the determination of orbit and attitude is discussed, along with the method of on-orbit control used in the INR system, and various factors that affect stability. Also discussed are potential error sources inherent in the INR system and the operational methods of compensating for these errors.

Fiorello, J. L., Jr.↗
NASA NTRS1989

Impact of tether cutting on onboard navigation during the Tethered Satellite Mission-1

The first Tethered Satellite System mission (TSS-1) is manifested for Shuttle Flight STS-44 in January of 1991. The TSS mission presents a new challenge to engineers, requiring advanced guidance, navigation and control concepts. Current NASA flight rules require that the navigational state of the Orbiter at deorbit burn be known to an accuracy of 20 nautical miles. Response of the Shuttle crew to this contingency may involve cutting the tether prior to a complete retrieval. The degradation of the navigational state accuracy as modelled by Shuttle navigation system is examined. Responses to the loss of communication scenario are proposed for two cases. The first case examines navigational performance during a nominal attitude profile. The second case is identical to the first, with the inclusion of modelled tether electrodynamical forces. Comparisons of trajectories propagated from the onboard navigational state vector and a reference ephemeris state vector were performed, with the tether cut simulated at various points during the mission. Additionally, updates to the onboard navigational state via ground uplinks were provided prior to the assumed loss of communication. Through these comparisons, the onboard navigation state error was determined. Alternative responses result from efforts to minimize this error during the various phases of TSS-1 deployment. These results demonstrated existing NASA flight rules could be violated by cutting the tether, and suggests reponses to a loss of communications contingency to maintain a more accurate navigational state.

Pirker, Dana M.↗
NASA NTRS1989

Analytical derivation and verification of zero-gyro control for the IUE satellite

The International Ultraviolet Explorer (IUE) satellite was launched January 26, 1978 into a geosynchronous orbit over South America. From its stationary position, the telescope maintains continuous communication with the control centers at NASA's Goddard Space Flight Center in Greenbelt, Maryland, and at the European Space Agency's (ESA's) Villagranca del Castillo Satellite Tracking Station in Spain. Since its launch in 1978, the satellite has gradually lost four of the original six gyroscopes in the Inertial Reference Assembly (IRA). In August 1985, the fourth of the original six gyros failed and a two-gyro system developed by NASA-GSFC was uplinked to the satellite and is currently in use. A one-gyro system also developed by NASA-GSFC is ready for use in case of another gyro failure. In the event that the sixth gyro should also fail, a zero-gyro system is being developed. The goal of this system is to provide interial target pointing without the use of gyroscopes. The satellite has sun sensors to provide attitude information about two of the three axes. It relies upon the exchange of reaction wheel momenta to determine angular position and rate of the third axis.

Bowles, Tiffany↗
NASA NTRS1989

Flight software development for the isothermal dendritic growth experiment

The Isothermal Dendritic Growth Experiment (IDGE) is a microgravity materials science experiment scheduled to fly in the cargo bay of the shuttle on the United States Microgravity Payload (USMP) carrier. The experiment will be operated by real-time control software which will not only monitor and control onboard experiment hardware, but will also communicate, via downlink data and uplink commands, with the Payload Operations Control Center (POCC) at NASA George C. Marshall Space Flight Center (MSFC). The software development approach being used to implement this system began with software functional requirements specification. This was accomplished using the Yourdon/DeMarco methodology as supplemented by the Ward/Mellor real-time extensions. The requirements specification in combination with software prototyping was then used to generate a detailed design consisting of structure charts, module prologues, and Program Design Language (PDL) specifications. This detailed design will next be used to code the software, followed finally by testing against the functional requirements. The result will be a modular real-time control software system with traceability through every phase of the development process.

Levinson, Laurie H.↗
NASA NTRS1990

Preliminary error budget for an optical ranging system: Range, range rate, and differenced range observables

Future missions to the outer solar system or human exploration of Mars may use telemetry systems based on optical rather than radio transmitters. Pulsed laser transmission can be used to deliver telemetry rates of about 100 kbits/sec with an efficiency of several bits for each detected photon. Navigational observables that can be derived from timing pulsed laser signals are discussed. Error budgets are presented based on nominal ground stations and spacecraft-transceiver designs. Assuming a pulsed optical uplink signal, two-way range accuracy may approach the few centimeter level imposed by the troposphere uncertainty. Angular information can be achieved from differenced one-way range using two ground stations with the accuracy limited by the length of the available baseline and by clock synchronization and troposphere errors. A method of synchronizing the ground station clocks using optical ranging measurements is presented. This could allow differenced range accuracy to reach the few centimeter troposphere limit.

Folkner, W. M.↗
NASA NTRS1990

Performance of three-way data types during Voyager's encounter with Neptune

Voyager's flyby of Neptune in August of 1989 was the most distant planetary encounter ever achieved. Round trip light travel time was more than eight hours, exceeding view periods at two of the three tracking station sites. Consequently, the majority of radiometric tracking was accomplished by transmitting the uplink from one station, and receiving the downlink at a different station. This procedure defines three-way data. Dependence on three-way data for orbit determination is one distinguishing element of Voyager's successful encounter with Neptune. This paper addresses the performance of three-way range and Doppler data supporting pre-encounter orbit determination and post-encounter orbit reconstruction. Also, calibrations which reduce systematic errors inherent to three-way data are described and analyzed.

Roth, D. C.↗
NASA NTRS1990

On-board ephemeris representation for Topex/Poseidon

The Topex/Poseidon satellite requires real-time on-board knowledge of the satellite and TDRS ephemeris for attitude determination and control and High-Gain Antenna (HGA) pointing. The ephemeris representation concept for the MMS (Multimission Modular Spacecraft) satellites has shown that compressing the predicted ephemeris in a Fourier Power Series (FPS) before uplinking in conjunction with the On-Board Computer (OBC) ephemeris reconstruction algorithms is an efficient technique for ephemeris representation. As an MMS-based satellite, Topex/Poseidon has inherited the Landsat ephemeris representation concept including a daily FPS upload. This paper presents the Topex/Poseidon concept, analysis, and results including the conclusion that the ephemeris representation duration could be extended to 10 days or more and convenient weekly uploading is adopted without an increase in OBC memory requirements.

Salama, Ahmed H.↗
NASA NTRS1991

Burst-Compression And -Expansion For TDMA Communication

Burst-compression and -expansion technique enables interconnection of users transmitting and receiving data at rates asynchronous with respect to clocks within ground terminals of satellite-switched, time-division-multiple-access (TDMA) communication network. Matrix switch aboard satellite routes bursts of data from source users received on uplink antennas to downlink antennas illuminating ground areas containing destination users. TDMA ground terminal compresses streams of data from source users into rapid bursts for transmission and reexpands bursts of received data into slower streams of data for delivery to destination users. Greater flexibility in interconnecting widely dispersed users achieved by use of hopping beams.

Budinger, James M.↗
NASA NTRS1990

Assessing information transfer in full mission flight simulations

Considerable attention must be given to the important topic of aircrew situation awareness in any discussion of aviation safety and flight deck design. Reliable means of assessing this important aspect of crew behavior without simultaneously interfering with the behavior are difficult to develop. Unobtrusive measurement of crew situation awareness is particularly important in the conduct of full mission simulations where considerable effort and cost is expended to achieve a high degree of operational fidelity. An unobtrusive method of assessing situational awareness is described here which employs a topical analysis of intra-crew communications. The communications were taken from videotapes of crew behavior prior to, during, and following an encounter with a microburst/windshear event. The simulation scenario re-created an actual encounter with an event during an approach into Denver Stapleton Airport. The analyses were conducted on twelve experienced airline crews with the objective of determining the effect on situation awareness of uplinking ground-based information of the crew during the approach. The topical analysis of crew communication was conducted on all references to weather or weather-related topics. The general weather topic was further divided into weather subtopical references such as surface winds, windshear, precipitation, etc., thereby allowing for an assessment of the relative frequency of subtopic reference during the scenario. Reliable differences were found between the relative frequency of subtopic references when comparing the communications of crews receiving a cockpit display of ground-based information to the communications of a control group. The findings support the utility of this method of assessing situation awareness and information value in full mission simulations. A limiting factor in the use of this measure is that crews vary in the amount of intra-crew communications that may take place due to individual differences and other factors associated with crew coordination. This factor must be taken into consideration when employing this measure. Viewgraphs are given.

Lee, Alfred T.↗
NASA NTRS1990

Science observations with the IUE using the one-gyro mode

The International Ultraviolet Explorer (IUE) attitude control system originally included an inertial reference package containing six gyroscopes for three axis stabilization. The science instrument includes a prime and redundant Field Error Sensor (FES) camera for target acquisition and offset guiding. Since launch, four of the six gyroscopes have failed. The current attitude control system utilizes the remaining two gyros and a Fine Sun Sensor (FSS) for three axis stabilization. When the next gyro fails, a new attitude control system will be uplinked which will rely on the remaining gyro and the FSS for general three axis stabilization. In addition to the FSS, the FES cameras will be required to assist in maintaining fine attitude control during target acquisition. This has required thoroughly determining the characteristics of the FES cameras and the spectrograph aperture plate as well as devising new target acquisition procedures. The results of this work are presented.

Imhoff, C.↗
NASA NTRS1991

Design concepts and performance of NASA X-band (7162 MHz/8415 MHz) transponder for deep-space spacecraft applications

The design concepts and measured performance characteristics are summarized of an X band (7162 MHz/8415 MHz) breadboard deep space transponder (DSP) for future spacecraft applications, with the first use scheduled for the Comet Rendezvous Asteroid Flyby (CRAF) and Cassini missions in 1995 and 1996, respectively. The DST consists of a double conversion, superheterodyne, automatic phase tracking receiver, and an X band (8415 MHz) exciter to drive redundant downlink power amplifiers. The receiver acquires and coherently phase tracks the modulated or unmodulated X band (7162 MHz) uplink carrier signal. The exciter phase modulates the X band (8415 MHz) downlink signal with composite telemetry and ranging signals. The receiver measured tracking threshold, automatic gain control, static phase error, and phase jitter characteristics of the breadboard DST are in good agreement with the expected performance. The measured results show a receiver tracking threshold of -158 dBm and a dynamic signal range of 88 dB.

Mysoor, N. R.↗
NASA NTRS1990

Investigation of Air Transportation Technology at Ohio University, 1989-1990

The activities of the participants in the Joint University Program (JUP) at Ohio University are briefly surveyed. During 1989 to 1990, five topics received emphasis. A spectrum-efficient weather data uplink system was designed, constructed, and flight tested. An integrated Global Positioning System/Inertial Navigation System (GPS/INS) study continued, utilizing the Redundant strapdown Inertial Measurement Unit (IMU) on loan from NASA. The Ridge Regression theory was refined and applied to air navigation scenarios. System Identification theory was applied to GPS data to point the way to better understanding of the effects of Selective Availability on civilian users of this navigation system. An analysis of thought-related (electroencephalographic) signals for application to control of computer systems that could have significance in aiding paraplegics or for hands-off systems control in industrial or air traffic control areas was carried out.

Lilley, Robert W.↗
NASA NTRS1991

A parallel-pipelined architecture for a multi carrier demodulator

Analog devices have been used for processing the information on board the satellites. Presently, digital devices are being used because they are economical and flexible as compared to their analog counterparts. Several schemes of digital transmission can be used depending on the data rate requirement of the user. An economical scheme of transmission for small earth stations uses single channel per carrier/frequency division multiple access (SCPC/FDMA) on the uplink and time division multiplexing (TDM) on the downlink. This is a typical communication service offered to low data rate users in commercial mass market. These channels usually pertain to either voice or data transmission. An efficient digital demodulator architecture is provided for a large number of law data rate users. A demodulator primarily consists of carrier, clock, and data recovery modules. This design uses principles of parallel processing, pipelining, and time sharing schemes to process large numbers of voice or data channels. It maintains the optimum throughput which is derived from the designed architecture and from the use of high speed components. The design is optimized for reduced power and area requirements. This is essential for satellite applications. The design is also flexible in processing a group of a varying number of channels. The algorithms that are used are verified by the use of a computer aided software engineering (CASE) tool called the Block Oriented System Simulator. The data flow, control circuitry, and interface of the hardware design is simulated in C language. Also, a multiprocessor approach is provided to map, model, and simulate the demodulation algorithms mainly from a speed view point. A hypercude based architecture implementation is provided for such a scheme of operation. The hypercube structure and the demodulation models on hypercubes are simulated in Ada.

Kwatra, S. C.↗