SEARCH · Search NASA

Results for “VELOCITY PROFILE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Experimental investigation of shock-cell noise reduction for dual-stream nozzles in simulated flight

Six scale-model nozzles were tested in an anechoic facility to evauate the effectiveness of convergent-divergent (C-D) terminations in reducing shock-cell noise of unsuppressed and mechanically suppressed coannular plug nozzles. One hundred fifty-three acoustic test points with inverted velocity profiles were conducted under static and simulated flight conditions. Diagnostic flow visualization with a shadowgraph and velocity measurements with a laser velocimeter were performed on selected plumes. Shock-cells were identified on the plug and downstream of the plug of the unsuppressed convergent coannular nozzle with truncated plug. Broadband peak frequencies predicted with the two shock-cell structures were correlated with the observed spectra using the measured shock-cell spacings. Relative to a convergent circular nozzle, the perceived noise level (PNL) data at an observer angle of 60 deg relative to inlet, indicated a reduction of (1) 6.5 dB and 9.2 dB with unsuppressed C-D coannular nozzle with truncated plug and (2) 7.7 dB and 8.3 dB with suppressed C-D coannular nozzle under static and simulated flight conditions, espectively. The unsuppressed C-D coannular nozzle with truncated plug, operating at the C-D design condition, had shock-cells downstream of the plug with no shock-cells on the plug. The downstream shock-cells were eliminated by replacing the truncated plug with a smooth extension to obtain an additional 2.4 dB and 3 dB front quadrant PNL reduction, under static and simulated flight conditions, respectively. Other results are discussed.

Janardan, B. A.↗

NASA NTRS1995

Analysis of developing laminar flows in circular pipes using a higher-order finite-difference technique

A higher-order finite-difference technique is developed to calculate the developing-flow field of steady incompressible laminar flows in the entrance regions of circular pipes. Navier-Stokes equations governing the motion of such a flow field are solved by using this new finite-difference scheme. This new technique can increase the accuracy of the finite-difference approximation, while also providing the option of using unevenly spaced clustered nodes for computation such that relatively fine grids can be adopted for regions with large velocity gradients. The velocity profile at the entrance of the pipe is assumed to be uniform for the computation. The velocity distribution and the surface pressure drop of the developing flow then are calculated and compared to existing experimental measurements reported in the literature. Computational results obtained are found to be in good agreement with existing experimental correlations and therefore, the reliability of the new technique has been successfully tested.

Gladden, Herbert J.↗

NASA NTRS2014

Flow-Field Investigation of Gear-Flap Interaction on a Gulfstream Aircraft Model

Off-surface flow measurements of a high-fidelity 18% scale Gulfstream aircraft model in landing configuration with the main landing gear deployed are presented. Particle Image Velocimetry (PIV) and Laser Velocimetry (LV) were used to measure instantaneous velocities in the immediate vicinity of the main landing gear and its wake and near the inboard tip of the flap. These measurements were made during the third entry of a series of tests conducted in the NASA Langley Research Center (LaRC) 14- by 22-Foot Subsonic Tunnel (14 x 22) to obtain a comprehensive set of aeroacoustic measurements consisting of both aerodynamic and acoustic data. The majority of the off-body measurements were obtained at a freestream Mach number of 0.2, angle of attack of 3 degrees, and flap deflection angle of 39 degrees with the landing gear on. A limited amount of data was acquired with the landing gear off. LV was used to measure the velocity field in two planes upstream of the landing gear and to measure two velocity profiles in the landing gear wake. Stereo and 2-D PIV were used to measure the velocity field over a region extending from upstream of the landing gear to downstream of the flap trailing edge. Using a special traverse system installed under the tunnel floor, the velocity field was measured at 92 locations to obtain a comprehensive picture of the pertinent flow features and characteristics. The results clearly show distinct structures in the wake that can be associated with specific components on the landing gear and give insight into how the wake is entrained by the vortex at the inboard tip of the flap.

Yao, Chung-Sheng↗

NASA NTRS1951

On stability and turbulence of fluid flows

This investigation is divided into two parts, the treatment of the stability problem of fluid flows on the one hand, and that of the turbulent motion on the other. The first part summarizes all previous investigations under a unified point of view, that is, sets up as generally as possible the conditions under which a profile possesses unstable or stable characteristics, and indicates the methods for solution of the stability equation for any arbitrary velocity profile and for calculation of the critical Reynolds number for unstable profiles. In the second part, under certain greatly idealizing assumptions, differential equations for the turbulent motions are derived and from them qualitative information about several properties of the turbulent velocity distribution is obtained.

FLOW, TURBULENT↗

DOE OSTI2025

Tropical Cyclone Super Resolution using conditional diffusion denoising probabilistic model from mesoscale simulation to LES

Accurate modeling of tropical cyclone wind fields is essential for the design, risk assessment, and operational planning of offshore energy infrastructure. While mesoscale simulations are widely used thanks to their computational efficiency, they lack the necessary resolution to capture key features such as wind shear and veer profiles as well as the distribution turbulent kinetic energy (TKE). High-fidelity large-eddy simulation (LES) models on the other hand, can resolve turbulent structures and provide a more accurate representation of the complex wind field, albeit at a higher computational cost. To address this modeling gap, we introduce a two-part generative framework to enhance the resolution and physics-capturing ability of mesoscale simulations. First, a reduced-order model based on Karhunen–Loève (KL) decomposition is used to extract dominant spatial modes from one-dimensional mean wind profiles. A multilayer perceptron (MLP) is trained to map mesoscale mode weights to their LES counterparts, enabling accurate reconstruction of vertical velocity profiles. Second, a conditional Diffusion Denoising Probabilistic Model (DDPM) is developed to super-resolve coarse and low-fidelity mesoscale velocity fields, recovering fine-scale turbulence structures and stress distributions. The framework is evaluated across different tropical cyclone intensity categories defined by the Saffir–Simpson scale and demonstrates strong performance in both interpolation and extrapolation tasks. The generated fields accurately reproduce spatial coherence, stress distributions, and spectral energy characteristics observed in LES data. By bridging the fidelity gap between mesoscale and LES outputs, this approach offers a scalable, data-driven solution for enhancing the representation of tropical cyclone wind fields, enabling more robust offshore energy infrastructure systems design in tropical-cyclone-prone areas.

17 WIND ENERGY↗

DOE OSTI2025

Linear Reciprocating Tribometer for In Situ Neutron Reflectometry of Soft Matter

Neutron reflectometry is a technique for measuring structure near planar interfaces that has been previously used to non-destructively characterize the polymer density of hydrated, dilute, and soft materials. Previous investigations have conducted neutron reflectometry measurements of liquids, gels, emulsion, and polymer solutions at rest, in compression, and subject to shear stress. However, correlating structure with tribological properties of soft materials presents significant experimental challenges for prior instruments due to wall slip, sample thickness, and structural heterogeneity (e.g., depth-wise gradients). A linear reciprocating tribometer offers several advantages for in situ neutron reflectometry studies, including uniform velocity profiles, constant shear stress over large regions of interest, and independent control of normal force and sliding velocity during measurements. This work outlines basic considerations for the design of a custom linear reciprocating tribometer that operates in a neutron beamline and includes commissioning measurements. The tribometer is designed to compress soft and hydrated materials against linearly reciprocating silicon disks. The three key design considerations for this tribometer are (1) safety, (2) neutron transmission, and (3) sample positioning. This instrument design will enable in situ studies of soft matter and illuminate the role of interfacial structure on tribological phenomena.

42 ENGINEERING↗

NASA NTRS1988

Subharmonic resonance in a mixing layer

The subharmonic resonance phenomenon in a spatially evolving mixing layer is studied using direct simulations of the 2-D Navier-Stokes equations. The computational domain extends to + or - infinity in the cross-stream direction with U(1) = 1.25 and U(2) = 0.25 imposed at + infinity and - infinity respectively. The domain is finite in the streamwise direction with inflow and outflow boundary conditions imposed at x/delta sub omega = 0 and 100, respectively. A hyperbolic-tangent mean velocity profile is assumed at the inlet and the Reynolds number based on the inlet vorticity thickness and velocity difference is Re = 600. It is observed that the phase angle between the fundamental and its subharmonic plays a key role in the spatial development of these modes. Contour plots of vorticity show that varying the phase will have a dramatic effect on the dynamics of the vortices. Pairing or shredding is observed depending on the phase. Fourier decomposition of the time traces show that the fundamental grows, saturates and decays with the downstream distance. The subharmonic has a similar behavior. However, the level at which the modes will saturate is affected by the phase. At 0 deg phase, it was found that as the fundamental saturates, the growth rate of the subharmonic is enhanced. At 90 deg phase, it was found that as the fundamental saturates, the growth rate of the subharmonic is inhibited. In the later case, the growth rate of the subharmonic recovers after saturation of the fundamental. These results are in qualitative agreement with experimental data.

Mansour, N. N.↗

NASA NTRS1948

Ice Protection of Turbojet Engines by Inertia Separation of Water II : Single-offset-duct System

Investigation of a single-offset-duct system designed to prevent entrance of water into a turbojet engine was conducted on a half-scale nacelle model. An investigation was made to determine ram-pressure recovery and radial velocity profiles at the compressor section and icing characteristics of such a duct system. At a design inlet velocity of 0.77, the maximum ram-pressure recovery attained with effective water-separating inlet was 77 percent, which is considerably less than attainable with a direct-ram inlet. Continuous heating of the accessory-housing surface would be required for inlets that have a small ice storage space.

NOSE SHAPE - DUCTED BODIES↗

NASA NTRS1993

Wind tunnel testing and research

The topics covered include the following: a test of a Space Shuttle model with various base enhancements intended to help reduce the drag of the Shuttle in the landing configuration; further tests conducted using a Shuttle model to explore base drag improvement techniques; testing of parafoils having different airfoil shapes and line lengths; a study of ground effects on a Shuttle model; and three dimensional velocity profiles in the wake aft of the Space Shuttle were determined to study the effects of wake velocities on the Orbiter drag chute.

Nicks, Oran W.↗

NASA NTRS2014

GRAIL Refinements to Lunar Seismic Structure

Joint interpretation of disparate geophysical datasets helps reduce drawbacks that can result from analyzing them individually. The Apollo seismic network was situated on the lunar nearside surface in a roughly equilateral triangle having sides approximately 1000 km long, with stations 12/14 nearly co-located at one corner. Due to this limited geographical extent, near-surface ray coverage from moonquakes is low, but increases with depth. In comparison, gravity surveys and their resulting gravity anomaly maps have traditionally offered optimal resolution at crustal depths. Gravimetric maps and seismic data sets are therefore well suited to joint inversion, since the complementary information reduces inherent model ambiguity. Previous joint inversions of the Apollo seismic data (seismic phase arrival times) and Clementine- or Lunar Prospector-derived gravity data (mass and moment of inertia) attempted to recover the subsurface structure of the Moon by focusing on hypothetical lunar compositions that explored the density/velocity relationship. These efforts typically searched for the best fitting thermodynamically calculated velocity/density model, and allowed variables like core size, velocity, and/or composition to vary freely. Seismic velocity profiles derived from the Apollo seismic data through travel time inversion vary both in the depth of the crust and mantle layers, and the seismic velocities and densities assigned to those layers. The lunar mass and moment of inertia likewise only constrain gross variations in the density profile beyond that of a uniform density sphere. As a result, composition and structure models previously obtained by jointly inverting these data retain the original uncertainties inherent in the input data sets. We perform a joint inversion of Apollo seismic delay times and gravity data collected by the GRAIL lunar gravity mission, in order to recover seismic velocity and density as a function of latitude, longitude, and depth within the Moon. We relate density (p) to seismic velocity (v) using a depth-dependent linear relationship. The corresponding coefficient (B) can reflect a variety of material properties, including temperature and composition. The inversion seeks to recover the set of p, v, and B perturbations that minimize (in a least-squares sense) the difference between the observed and calculated data.

Weber, Renee C.↗

NASA NTRS1975

Supercritical airfoil flowfield measurements

Detailed measurements in the transonic flowfield about a Whitcomb-type supercritical airfoil profile are presented including surface pressure distributions, far wake surveys, spark schlieren photographs, and a series of vector velocity profiles in the boundary layer and in the near wake. A flowfield composite for the transonic drag rise condition is constructed from these data. The boundary layer measurements are compared with current correlation and computation schemes, and the importance of viscous thickening effects is demonstrated by the results of wave drag rise calculations for the thickened and unthickened profiles.

Hurley, F. X.↗

NASA NTRS1979

Jovian cloud structure and velocity fields

A global view of Jovian small-scale morphologies and zonal velocity profiles has been discussed previously. In the present paper, a regional comparison is made of the structures and velocity fields (meridional and zonal velocities) in the Jovian atmosphere as observed by Voyager I imaging system. The cloud structures discussed are fairly independent of the visual wavelength. The analysis shows that although both Jovian hemispheres exhibit similar patterns of diminishing and alternating eastward and westward jets as one progresses polewards, there is a pronounced asymmetry in the structural appearance of the two hemispheres.

Mitchell, J. L.↗

NASA NTRS1997

Accuracy Study of a 2-Component Point Doppler Velocimeter (PDV)

A two-component Point Doppler Velocimeter (PDV) which has recently been developed is described, and a series of velocity measurements which have been obtained to quantify the accuracy of the PDV system are summarized. This PDV system uses molecular iodine vapor cells as frequency discriminating filters to determine the Doppler shift of laser light which is scattered off of seed particles in a flow. The majority of results which have been obtained to date are for the mean velocity of a rotating wheel, although preliminary data are described for fully-developed turbulent pipe flow. Accuracy of the present wheel velocity data is approximately +/- 1 % of full scale, while linearity of a single channel is on the order of +/- 0.5 % (i.e., +/- 0.6 m/sec and +/- 0.3 m/sec, out of 57 m/sec, respectively). The observed linearity of these results is on the order of the accuracy to which the speed of the rotating wheel has been set for individual data readings. The absolute accuracy of the rotating wheel data is shown to be consistent with the level of repeatability of the cell calibrations. The preliminary turbulent pipe flow data show consistent turbulence intensity values, and mean axial velocity profiles generally agree with pitot probe data. However, there is at present an offset error in the radial velocity which is on the order of 5-10 % of the mean axial velocity.

Kuhlman, John↗

NASA NTRS2005

Sub-Grid Modeling of Electrokinetic Effects in Micro Flows

Advances in micro-fabrication processes have generated tremendous interests in miniaturizing chemical and biomedical analyses into integrated microsystems (Lab-on-Chip devices). To successfully design and operate the micro fluidics system, it is essential to understand the fundamental fluid flow phenomena when channel sizes are shrink to micron or even nano dimensions. One important phenomenon is the electro kinetic effect in micro/nano channels due to the existence of the electrical double layer (EDL) near a solid-liquid interface. Not only EDL is responsible for electro-osmosis pumping when an electric field parallel to the surface is imposed, EDL also causes extra flow resistance (the electro-viscous effect) and flow anomaly (such as early transition from laminar to turbulent flow) observed in pressure-driven microchannel flows. Modeling and simulation of electro-kinetic effects on micro flows poses significant numerical challenge due to the fact that the sizes of the double layer (10 nm up to microns) are very thin compared to channel width (can be up to 100 s of m). Since the typical thickness of the double layer is extremely small compared to the channel width, it would be computationally very costly to capture the velocity profile inside the double layer by placing sufficient number of grid cells in the layer to resolve the velocity changes, especially in complex, 3-d geometries. Existing approaches using "slip" wall velocity and augmented double layer are difficult to use when the flow geometry is complicated, e.g. flow in a T-junction, X-junction, etc. In order to overcome the difficulties arising from those two approaches, we have developed a sub-grid integration method to properly account for the physics of the double layer. The integration approach can be used on simple or complicated flow geometries. Resolution of the double layer is not needed in this approach, and the effects of the double layer can be accounted for at the same time. With this approach, the numeric grid size can be much larger than the thickness of double layer. Presented in this report are a description of the approach, methodology for implementation and several validation simulations for micro flows.

Chen, C. P.↗

NASA NTRS2013

GRAIL Refinements to Lunar Seismic Structure

Joint interpretation of disparate geophysical datasets helps to reduce drawbacks that can result from analyzing them individually. The Apollo seismic network was situated on the lunar nearside surface in a roughly equilateral triangle having sides approximately 1000 km long, with stations 12/14 nearly co‐located at one corner. Due to this limited geographical extent, near‐surface ray coverage from moonquakes is low, but increases with depth. In comparison, gravity surveys and their resulting gravity anomaly maps have traditionally offered optimal resolution at crustal depths. Gravimetric maps and seismic data sets are therefore well suited to joint inversion, since the complementary information reduces inherent model ambiguity. Previous joint inversions of the Apollo seismic data (seismic phase arrival times) and Clementine‐ or Lunar Prospector‐derived gravity data (mass and moment of inertia) attempted to recover the subsurface structure of the Moon by focusing on hypothetical lunar compositions that explore the density/velocity relationship. These efforts typically search for the best fitting thermodynamically calculated velocity/density model, allowing variables like core size, velocity, and/or composition to vary freely. Seismic velocity profiles previously derived from the Apollo seismic data through inversion of travel times vary both in the depth of the crust and mantle layers, and the seismic velocities and densities assigned to those layers. The lunar mass and moment of inertia likewise only constrain gross variations in the density profile beyond that of a uniform density sphere. As a result, composition and structure models previously obtained by jointly inverting these data retain the original uncertainties inherent in the input data sets. We will perform a joint inversion of Apollo seismic delay times and gravity data collected by the GRAIL lunar gravity mission, in order to recover seismic velocities and density as a function of latitude, longitude, and depth within the Moon. We will relate density to seismic velocity using a linear relationship that is allowed to be depth‐dependent. The corresponding coefficient (B) can reflect a variety of material properties that vary with depth, including temperature and composition. The inversion seeks to recover the set of density, velocity, and B‐coefficient perturbations that minimize (in a least‐squares sense) the difference between the observed and calculated data.

Weber, Renee C.↗

DOE OSTI2025

Sound Velocity of Hematite up to 13 GPa

We performed acoustic measurements on polycrystalline hematite using ultrasonic interferometric techniques in a Kawai-type multi-anvil apparatus. The elastic moduli and their pressure derivatives were determined by fitting the experimental data to third-order finite strain equations, yielding: 𝐾 𝑆,0 = 214.8 (20) GPa, 𝐺 0 = 92.0 (2) GPa, 𝐾$^{′}_{S,0}$ = 5.70 (1), and 𝐺$^{′}_{0}$ = 0.88 (4). Modeling of the velocity profiles of hematite along hot and cold slab geotherms shows that compressional (V P ) and shear (V S ) wave velocities are 22%–24% and 53%–55% lower, respectively, compared to the Preliminary Reference Earth Model at the top of the lower mantle. Furthermore, these findings likely offer a potential explanation for the low-velocity anomalies associated with slab graveyards at the base of the lower mantle.

36 MATERIALS SCIENCE↗

NASA NTRS1999

Experimental Studies of the Interaction Between a Parallel Shear Flow and a Directionally-Solidifying Front

It has long been recognized that flow in the melt can have a profound influence on the dynamics of a solidifying interface and hence the quality of the solid material. In particular, flow affects the heat and mass transfer, and causes spatial and temporal variations in the flow and melt composition. This results in a crystal with nonuniform physical properties. Flow can be generated by buoyancy, expansion or contraction upon phase change, and thermo-soluto capillary effects. In general, these flows can not be avoided and can have an adverse effect on the stability of the crystal structures. This motivates crystal growth experiments in a microgravity environment, where buoyancy-driven convection is significantly suppressed. However, transient accelerations (g-jitter) caused by the acceleration of the spacecraft can affect the melt, while convection generated from the effects other than buoyancy remain important. Rather than bemoan the presence of convection as a source of interfacial instability, Hurle in the 1960s suggested that flow in the melt, either forced or natural convection, might be used to stabilize the interface. Delves considered the imposition of both a parabolic velocity profile and a Blasius boundary layer flow over the interface. He concluded that fast stirring could stabilize the interface to perturbations whose wave vector is in the direction of the fluid velocity. Forth and Wheeler considered the effect of the asymptotic suction boundary layer profile. They showed that the effect of the shear flow was to generate travelling waves parallel to the flow with a speed proportional to the Reynolds number. There have been few quantitative, experimental works reporting on the coupling effect of fluid flow and morphological instabilities. Huang studied plane Couette flow over cells and dendrites. It was found that this flow could greatly enhance the planar stability and even induce the cell-planar transition. A rotating impeller was buried inside the sample cell, driven by an outside rotating magnet, in order to generate the flow. However, it appears that this was not a well-controlled flow and may also have been unsteady. In the present experimental study, we want to study how a forced parallel shear flow in a Hele-Shaw cell interacts with the directionally solidifying crystal interface. The comparison of experimental data show that the parallel shear flow in a Hele-Shaw cell has a strong stabilizing effect on the planar interface by damping the existing initial perturbations. The flow also shows a stabilizing effect on the cellular interface by slightly reducing the exponential growth rate of cells. The left-right symmetry of cells is broken by the flow with cells tilting toward the incoming flow direction. The tilting angle increases with the velocity ratio. The experimental results are explained through the parallel flow effect on lateral solute transport. The phenomenon of cells tilting against the flow is consistent with the numerical result of Dantzig and Chao.

Zhang, Meng↗

NASA NTRS1975

Theoretical and experimental study of a new method for prediction of profile drag of airfoil sections

Theoretical and experimental studies are described which were conducted for the purpose of developing a new generalized method for the prediction of profile drag of single component airfoil sections with sharp trailing edges. This method aims at solution for the flow in the wake from the airfoil trailing edge to the large distance in the downstream direction; the profile drag of the given airfoil section can then easily be obtained from the momentum balance once the shape of velocity profile at a large distance from the airfoil trailing edge has been computed. Computer program subroutines have been developed for the computation of the profile drag and flow in the airfoil wake on CDC6600 computer. The required inputs to the computer program consist of free stream conditions and the characteristics of the boundary layers at the airfoil trailing edge or at the point of incipient separation in the neighborhood of airfoil trailing edge. The method described is quite generalized and hence can be extended to the solution of the profile drag for multi-component airfoil sections.

Goradia, S. H.↗