Search NASA⌕ Search

SEARCH · Search NASA

Results for “angle diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Cathode Upcycling for Direct Recycling of Lithium‐Ion Batteries Using a Precipitation Approach

With the increased production of electric vehicles to reduce carbon emissions, the lithium-ion battery market to supply those vehicles has grown dramatically. To enhance battery sustainability and circularity, direct recycling methods aim to recover intact cathode materials. However, end-of-life cathode materials are typically 15–20 years old and often have lower energy density compared to current cathode materials. To address this challenge, a rapid precipitation process is developed to boost energy density by converting low Ni-compositions, LiNi 0.33 Co 0.33 Mn 0.33 O 2 (NMC111), into higher Ni-compositions (NMC622). This process forms a Ni-rich coating on cathode particles that diffuses into the core upon high-temperature relithiation, increasing compositional homogeneity. The upcycling process leverages existing infrastructure, offering low capital cost and minimal additional chemical input. Through ex situ tomographic transmission X-ray microscopy (TXM), 3D Ni:Co elemental mixing is quantified, confirming that elemental content evens at the secondary particle level with a mean NMC622 composition upon relithiation. However, elemental gradients remain in the single crystalline primary particles. Ex situ high-resolution and in situ wide-angle X-ray diffraction reveals concurrent structural changes during the relithiation process. These findings provide key insights into the structural and chemical mechanisms of elemental diffusion to obtain further improvements of increased capacity and retention through compositional conversion of cathode materials.

Cathode Upcycling↗

The role of nanoparticle rigidity on the diffusion of linear polystyrene in a polymer nanocomposite

The impact of the inclusion of a nanoparticle in a polymer matrix on the dynamics of the polymer chains is an area of recent interest. In this article, we describe the role of nanoparticle rigidity or softness on the impact of the presence of that nanoparticle on the diffusive behavior of linear polymer chains. The neutron reflectivity results clearly show that the inclusion of 10 nm soft nanoparticles in a polymer matrix (R g ~ 20 nm) increases the diffusion coefficient of the linear polymer chain. Surprisingly, thermal analysis shows that these nanocomposites exhibit an increase in their glass transition temperature, which is incommensurate with an increase in free volume. Therefore, it appears that this effect is more complex than a simple plasticizing effect. Results from small-angle neutron scattering of the nanoparticles in solution show a structure that consists of a gel like core with a corona of free chain ends and loops. Furthermore, the increase in linear polymer diffusion may be related to an increase in constraint release mechanisms in the reptation of the polymer chain, in a similar manner to that which has been reported for the diffusion of linear polymer chains in the presence of star polymers.

36 MATERIALS SCIENCE↗

Note: Electrochemical etching of cylindrical nanoprobes using a vibrating electrolyte

An electrochemical etching process using a vibrating electrolyte of potassium hydroxide to prepare tungsten cylindrical nanotips is developed. The vibrating electrolyte eases the effects of a diffusion layer and extends the etching area, which aid in the production of cylindrical nanotips. Larger amplitudes and a vibration frequency of 35 Hz are recommended for producing cylindrical nanotips. Nanotips with a tip radius of approximately 43 nm and a conical angle of arctan 0.0216 are obtained.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Characteristic energy range of electron scattering due to plasmaspheric hiss

In this paper, we investigate the characteristic energy range of electron flux decay due to the interaction with plasmaspheric hiss in the Earth's inner magnetosphere. The Van Allen Probes have measured the energetic electron flux decay profiles in the Earth's outer radiation belt during a quiet period following the geomagnetic storm that occurred on 7 November 2015. The observed energy of significant electron decay increases with decreasing L shell and is well correlated with the energy band corresponding to the first adiabatic invariant μ = 4–200 MeV/G. The electron diffusion coefficients due to hiss scattering are calculated at L = 2–6, and the modeled energy band of effective pitch angle scattering is also well correlated with the constant μ lines and is consistent with the observed energy range of electron decay. Using the previously developed statistical plasmaspheric hiss model during modestly disturbed periods, we perform a 2-D Fokker-Planck simulation of the electron phase space density evolution at L = 3.5 and demonstrate that plasmaspheric hiss causes the significant decay of 100 keV–1 MeV electrons with the largest decay rate occurring at around 340 keV, forming anisotropic pitch angle distributions at lower energies and more flattened distributions at higher energies. Finally, our study provides reasonable estimates of the electron populations that can be most significantly affected by plasmaspheric hiss and the consequent electron decay profiles.

79 ASTRONOMY AND ASTROPHYSICS↗

Quantum multi-programming for Grover’s search

Quantum multi-programming is a method utilizing contemporary noisy intermediate-scale quantum computers by executing multiple quantum circuits concurrently. Despite early research on it, the research remains on quantum gates or small-size quantum algorithms without correlation. In this paper, we propose a quantum multi-programming (QMP algorithm for Grover's search. Our algorithm decomposes Grover's algorithm by the partial diffusion operator and executes the decomposed circuits in parallel by QMP. We proved that this new algorithm increases the rotation angle of the Grover operator which, as a result, increases the success probability. The new algorithm is implemented on IBM quantum computers and compared with the canonical Grover's algorithm and other variations of Grover's algorithms. So, the empirical tests validate that our new algorithm outperforms other variations of Grover's algorithms as well as the canonical Grover's algorithm.

97 MATHEMATICS AND COMPUTING↗

Sn-InAs Nanowire Shadow-Defined Josephson Junctions

Hybrid superconductor–semiconductor platforms are foundational to advancing quantum information technologies, motivating the integration of materials with clean interfaces, robust superconductivity, and scalable architectures. Here, in this work, we report the synthesis and analysis of inclined InAs nanowires, conformally coated with β-Sn shells. These nanowires extend in opposite in-plane directions, forming a self-aligned, criss-cross network. This enables the deterministic formation of nanowire-shadow Josephson junctions through angle-controlled, low-temperature Sn deposition. Structural characterization shows uniform polycrystalline β-Sn shells forming a sharp, diffusion-free interface with InAs. Low-temperature transport measurements reveal a hard induced superconducting gap ≈ 600 μeV, switching currents up to ≈ 500 nA, and parallel magnetic field resilience beyond 1T. These results establish β-Sn/InAs nanowire networks as a promising platform for superconducting qubits, low-noise microwave devices, and the exploration of exotic superconducting phases including triplet pairing and topological superconductivity.

B-Sn↗

Restructuring of the Lewis Acid Sites in Y-Modified Dealuminated Beta-Zeolite by Hydrothermal Treatment

Yttrium-modified dealuminated Betazeolite (Y-BEA) represents a type of Lewis acid zeolite that has gained attention for its potential to efficiently catalyze the conversion of biomass-derived oxygenates. The structure of the Y active sites and their dynamics during biomass conversion reactions, which normally involve substantial amounts of water, necessitate thorough investigation for the rational design of more active and stable catalysts. Here, we conducted a study where a series of Y-BEA catalysts with different yttrium loadings (1–7 wt.%) were subjected to hydrothermal treatment (450 °C, 20% water) and investigated for their structural and catalytic activity changes through a combination of multiple characterizations and kinetic measurements. The number of acid sites of Y-BEA decreased without a change in acid strength following the hydrothermal treatment, which was confirmed by the results of acid site titration, infrared spectroscopy of probe molecules, and kinetic measurements for probe reactions (acetone aldol condensation). Structural analysis using X-ray diffraction (XRD), specific surface area measurement, X-ray absorption spectroscopy (XAS), and X-ray photoelectron spectroscopy (XPS) demonstrated that both the zeolite structure and the isolation status of the Y site remain intact after hydrothermal treatment. Further, the Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS) spectra, thermogravimetric analysis (TGA), and operando 1 H and 29 Si magic-angle spinning (MAS) nuclear magnetic resonance (NMR) revealed the dehydroxylation of Y-BEA induced by hydration-rearrangement-condensation restructuring during the high-temperature steam treatment. Dehydroxylation affects the structure of Y sites by reducing their vicinal silanol sites. In conclusion, this conversion of Lewis acidic Y sites into nonacidic sites is the primary factor behind the change in acid site quantity and catalytic activity on Y-BEA.

36 MATERIALS SCIENCE↗

Molecular Dynamics Simulations of Highly Charged Green Fluorescent Proteins

A recent experimental study showed that green fluorescent protein (GFP) that has been mutated to have ultra-high positive or negative net charges, retain their native structure and fluorescent properties while gaining resistance to aggregation under denaturing conditions. These proteins also provide an ideal test case for studying the effects of surface charge on protein structure and dynamics. They have performed classical molecular dynamics (MD) simulations on the near-neutral wildtype GFP and mutants with net charges of -29 and +35. They analyzed the resulting trajectories to quantify differences in structure and dynamics between the three GFPs. This analyses shows that all three proteins are stable over the MD trajectory, with the near-neutral wild type GFP exhibiting somewhat more flexibility than the positive or negative GFP mutants, as measured by the order parameter and changes in phi-psi angles. There are more dramatic differences in the properties of the water and counter ions surrounding the proteins. The water diffusion constant near the protein surface is closer to the value for bulk water in the positively charged GFP than in the other two proteins. Additionally, the positively charged GFP shows a much greater clustering of the counter ions (CL-) near its surface than corresponding counter ions (Na+) near the negatively charged mutant.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An Experimental and Theoretical Examination of Air Ingress Rates During Small- and Medium-Break Air Ingress Accidents

Here, air ingress measurements using the 1/20th-scaled Helium Air Ingress gas Reactor Experiment (HAIRE) facility show key geometric variables of interest and their effect on air ingress in small- and medium-sized breaks in High Temperature Gas cooled Reactors. These variables include but are not limited to break diameter, break angle, and break wall thickness. Differing wall thicknesses for the same break diameter can have order-of-magnitude changes to the air ingress rate, which is a key figure of merit in the air ingress accident scenario. Additionally, different break sizes can change the importance of the angle in the break scenario. With smaller breaks, the flow will not transition from intermittent flow, to countercurrent flow, to diffusive flow as the break rotates from vertically upward toward vertically downward. This would lead to less variability with smaller breaks, which in turn would make the accident scenario more predictable for smaller-sized breaks.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A NEW COSMIC RAY TRANSPORT THEORY IN PARTIALLY TURBULENT SPACE PLASMAS: EXTENDING THE QUASILINEAR APPROACH

A new transport theory of cosmic rays in magnetized space plasmas with axisymmetric incompressible magnetic turbulence is developed extending the quasilinear approximation to the particle orbit. Arbitrary gyrophase deviations from the unperturbed spiral orbits in the uniform magnetic field are allowed. For quasi-stationary and spatially homogeneous magnetic turbulence, we derive the small Larmor radius approximation gyrophase-averaged cosmic ray Fokker-Planck coefficients. The generalized Fokker-Planck coefficients correctly reduce to their known quasilinear values in the corresponding limit. New forms of the quasilinear Fokker-Planck coefficients in axisymmetric turbulence are derived which no longer involve infinite sums of products of Bessel functions, which facilitate their numerical computation for specified turbulence field correlation tensors. The Fokker-Planck coefficients for arbitrary phase orbits of the cosmic ray particles provide strict upper limits for the perpendicular and pitch-angle Fokker-Planck coefficients, which in turn yield strict upper and lower limits for the perpendicular and parallel spatial diffusion coefficients, respectively, describing the spatial diffusion of the isotropic part of the cosmic ray phase space density. For the associated mean free paths, we find for this general case that the product of the minimum parallel mean free path with the sum of the maximum perpendicular mean free paths equals R{sup 2}{sub L}, where R{sub L} denotes the cosmic ray gyroradius.

79 ASTRONOMY AND ASTROPHYSICS↗

Structure and interdiffusion of epitaxial ZnO/ZnMgO nanolayered thin films

Interdiffusion was studied in Zn{sub 1-x}Mg{sub x}O:Al/ZnO expitaxial superlattices with periods of 15 and 25 nm grown on basal-plane sapphire by dc reactive sputtering. Interdiffusion coefficients were determined by analyzing low angle x-ray reflectivity peak intensity decreases during isothermal annealing, using analytical interdiffusion expressions. The results were corroborated with diffusion data obtained from secondary ion mass spectrometry compositional depth profiles. An initial fast diffusion stage was observed for, e.g., the first few hours at 500 deg. C, followed by slower diffusion at longer times.

36 MATERIALS SCIENCE↗

Hand Calculations for Nuclear Criticality Safety – Primer Revision

The document “ Hand Calculation Methods for Criticality Safety – A Primer, ” was published by the authors (Los Alamos National Laboratory report LA-14244-M) in December 2006 to provide an overview of the most common hand calculation methods used for criticality safety analysis. Hand calculation methods can be used as a starting point for more advanced calculations, and in many circumstances, they can provide sensitivity and perturbation information quicker than using a criticality code, such as KENO or MCNP. This report has been revised to augment existing basis information and example problems for each of the methods discussed: 1-group and modified 1- group diffusion theory, core-density conversions, buckling conversions, limiting surface density method, density analog method, surface density method, and solid angle method. This primer discusses the applicability of the various methods, illustrates how they are used, and provides an interpretation of the example problem results. The example problems provided are simple, practical problems, and the reference data to solve each example problem is provided. This paper will provide an overview of the Primer revision and how it can be useful for new Nuclear Criticality Safety practitioners.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Hand Calculations for Nuclear Criticality Safety — Primer Revision [Abstract]

The document “ Hand Calculation Methods for Criticality Safety –A Primer, ” was published by the authors (Los Alamos National Laboratory report LA-14244-M) in December 2006 to provide an overview of the most common hand calculation methods used for criticality safety analysis. Hand calculation methods can be used as a starting point for more advanced calculations, and in many circumstances, they can provide sensitivity and perturbation information quicker than using a criticality code, such as KENO or MCNP. This report has been revised to augment existing basis information and example problems for each of the methods discussed: 1-group and modified 1-group diffusion theory, core-density conversions, buckling conversions, limiting surface density method, density analog method, surface density method, and solid angle method. This primer discusses the applicability of the various methods, illustrates how they are used, and provides an interpretation of the example problem results. The example problems provided are simple, practical problems, and the reference data to solve each example problem is provided. This paper will provide an overview of the Primer revision and how it can be useful for new Nuclear Criticality Safety practitioners.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

High-fidelity Pebble Bed Reactor Depletion Based on Pebble Tracking Transport in Griffin

The pebble tracking transport (PTT) method is a high-fidelity, heterogeneous deterministic transport technique for pebble bed reactor analysis. It discretizes the broad-group neutron transport equation in space and angle with the discontinuous finite element and the discrete ordinates method, and utilizes various solving techniques, including mesh sweeping and diffusion acceleration, to provide pebble- wise reaction rates. This work presents the extension of the PTT method to enable fuel depletion capability in the Griffin code. We discuss the implementation details of the PTT-based high-fidelity depletion where isotope inventory of all individual pebbles is tracked through pre-determined pebble flow paths in the core. The implementation is verified with a generic pebble bed reactor model. Some preliminary equilibrium core results are included. Future works are also discussed.

97 - MATHEMATICS AND COMPUTING↗

Intra-beam scattering and its application to ERL

Treatment of Coulomb collisions within the beam requires consideration of both large and small angle scattering. Such collisions lead to the Touschek effect and Intrabeam Scattering (IBS). The Touschek effect refers to particle loss as a result of a single collision, where only transfer from the transverse direction into longitudinal plays a role. It is important to consider this effect for ERL design to have an appropriate choice of collimation system. The IBS is a diffusion process which leads to changes of beam distribution but does not necessarily result in a beam loss. Evaluation of IBS in ERLs, where beam distribution is non-Gaussian, requires special treatment. Here we describe the IBS and Touschek effects with application to ERLs.

43 PARTICLE ACCELERATORS↗

Interaction of lysozyme protein with different sized silica nanoparticles and their resultant structures

The interaction of model protein-lysozyme with three different sized anionic silica nanoparticles has been studied by UV-vis spectroscopy, dynamic light scattering (DLS) and small-angle neutron scattering (SANS). The surface area and curvature of the nanoparticles change with size, which significantly influence their interaction with protein. The lysozyme adsorbs on the surface of the nanoparticles due to electrostatic attraction and leads to the phase transformation from one phase (clear) to two-phase (turbid) of the nanoparticle-protein system. The dominance of lysozyme induced short-range attraction over long-range electrostatic repulsion between nanoparticles is responsible for phase transformation and modeled by the two-Yukawa potential. The magnitude of the attractive interaction increases with the size of the nanoparticles as a result the phase transformation commences relatively at lower concentration of lysozyme. The structure of the nanoparticle-protein system in two-phase is characterized by the diffusion limited aggregate type of mass fractal morphology.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of cold drawing ratio on γ′ precipitation in Inconel X-750

Inconel X-750 is a Ni-based precipitation-hardened superalloy having large tensile and fracture strengths. In the study, X-750 wires were cold drawn to different extents. Small angle neutron scattering was employed to quantitatively measure the size and volume fraction of the γ′ phase as a function of the cold drawing ratio (DR) and aging temperature. The presence and size of γ′ precipitates were confirmed by transmission electron microscopy. The drawing ratio had an important effect on the volume fraction of the γ′ precipitates. However, the size of the precipitates was independent on the drawing ratio. The specimen with the minimum drawing ratio (DR0) produced the largest volume fraction of γ′ as compared with large drawing ratio (DR) specimens such as DR17 and DR42. The small volume fraction of the γ′ phase for a sizeable drawing ratio was associated with the large amount of nucleation sites for secondary carbides, M{sub 23}C{sub 6}, and the fast diffusion path, i.e., dislocation, needed to form M{sub 23}C{sub 6}. A Cr depletion zone around the secondary carbides raised the solubility of γ′. Therefore, the significant drawing ratio contributing to the large volume fraction of the secondary carbides decreased the volume fraction of the γ′ precipitates in Inconel X-750. - Highlights: • The volume fraction of secondary carbides increased with the drawing ratio. • The volume fraction of γ′ decreased as the drawing ratio increased. • The drawing ratio affected the γ′ volume fraction with no variation of the γ' size. • The volume fraction of γ′ was affected by the secondary carbide volume fraction.

36 MATERIALS SCIENCE↗