Search NASA⌕ Search

SEARCH · Search NASA

Results for “angular distribution model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Interstellar Scattering Towards the Galactic Center as Probed by OH/IR Stars

Angular broadening measurements are reported of 20 OH/IR stars near the galactic center. This class of sources is known to have bright, intrinsically compact (less than or equal to 20 mas) maser components within their circumstellar shells. VLBA antennas and the VLA were used to perform a MKII spectral line VLBI experiment. The rapid drop in correlated flux with increasing baseline, especially for sources closest to the galactic center, is attributed to interstellar scattering. Angular diameters were measured for 13 of our sources. Lower limits were obtained for the remaining seven. With the data, together with additional data taken from the literature, the distribution was determined of interstellar scattering toward the galactic center. A region was found of pronounced scattering nearly centered on SgrA*. Two interpretations are considered for the enhanced scattering. One hypothesis is that the scattering is due to a clump of enhanced turbulence, such as those that lie along lines of sight to other known objects, that has no physical relationship to the galactic center. The other model considers the location of the enhanced scattering to arise in the galactic center itself. The physical implications of the models yield information on the nature of interstellar scattering.

Vanlangevelde, Huib Jan↗
NASA NTRS1983

X-ray studies of BL Lacertae objects with the Einstein Observatory - Confrontation with the synchrotron self-Compton predictions

X-ray flux densities measured with the Einstein Observatory are presented for a set of LB Lac objects with available VLBI angular sizes. The static, single-component synchrotron self-Compton formalism is used to predict the X-ray flux densities. Ratios of 10 to the -6th to the 10 to the -8th are found for the observed to predicted flux densities and it is concluded that such a model, at least in its simplest form, does not explain the X-ray emission from these objects as a class. The hypothesis that the compact source is in relativistic motion allows a simple resolution of the discrepancy. The results agree qualitatively with a broad distribution of bulk Lorentz factors Gamma with a fairly low typical value of Gamma approximately equal to and with a quasi-isotropic distribution of the direction of ejection relative to our line of sight.

Madejski, G. M.↗
NASA NTRS1987

Linear and nonlinear dynamic instability of rotating polytropes

A three-dimensional hydrodynamic computer program is used to study the growth of nonaxisymmetric structures in rapidly rotating, self-gravitating polytropes. Models with polytropic index n = 0.8, 1.0, 1.3, 1.5, and 1.8 are studied. The initially axisymmetric equilibria are constructed by the Ostriker-Mark self-consistent-field method. The nonaxisymmetric pattern that develops out of low-amplitude random noise is a two-armed spiral with a well-defined pattern speed and growth rate which closely match properties of the toroidal mode predicted from the linear, second-order tensor-virial equation. A Fourier analysis of each polytrope's azimuthal density distribution shows that, even in the linear amplitude regime, higher-order angular patterns also develop exponentially in time. The higher-order patterns ultimately move in synchronization with the broad two-armed spiral, creating a narrow two-armed spiral. As the polytropic index is decreased, a more open and centrally more barlike pattern develops.

Williams, Harold A.↗
NASA NTRS2003

Expected Improvements in VLBI Measurements of the Earth's Orientation

Measurements of the Earth s orientation since the 1970s using space geodetic techniques have provided a continually expanding and improving data set for studies of the Earth s structure and the distribution of mass and angular momentum. The accuracy of current one-day measurements is better than 100 microarcsec for the motion of the pole with respect to the celestial and terrestrial reference frames and better than 3 microsec for the rotation around the pole. VLBI uniquely provides the three Earth orientation parameters (nutation and UTI) that relate the Earth to the extragalactic celestial reference frame. The accuracy and resolution of the VLBI Earth orientation time series can be expected to improve substantially in the near future because of refinements in the realization of the celestial reference frame, improved modeling of the troposphere and non-linear station motions, larger observing networks, optimized scheduling, deployment of disk-based Mark V recorders, full use of Mark IV capabilities, and e-VLBI. More radical future technical developments will be discussed.

Ma, Chopo↗
NASA NTRS2013

Characterization of the Gaseous Companion k Andromedae B* New Keck and LBTI High-contrast Observations

Context. We previously reported the direct detection of a low mass companion at a projected separation of 55+/-2 astronomical units around the B9 type star kappa Andromedae. The properties of the system (mass ratio, separation) make it a benchmark for the understanding of the formation and evolution of gas giant planets and brown dwarfs on wide-orbits. Aims. We present new angular differential imaging (ADI) images of the system at 2.146 (K(sub s)), 3.776 (L'), 4.052 (NB 4.05) and 4.78 micrometers (M') obtained with Keck/NIRC2 and LBTI/LMIRCam, as well as more accurate near-infrared photometry of the star with the MIMIR instrument. We aim to determine the near-infrared spectral energy distribution (SED) of the companion and use it to characterize the object. Methods. We used analysis methods adapted to ADI to extract the companion flux. We compared the photometry of the object to reference young/old objects and to a set of seven PHOENIX-based atmospheric models of cool objects accounting for the formation of dust. We used evolutionary models to derive mass estimates considering a wide range of plausible initial conditions. Finally, we used dedicated formation models to discuss the possible origin of the companion. Results. We derive a more accurate J = 15.86 +/- 0.21, H = 14.95 +/- 0.13, K(sub s) = 14.32 +/- 0.09 mag for kappa And b. We redetect the companion in all our high contrast observations. We confirm previous contrasts obtained at K(sub s) and L' band. We derive NB 4.05 = 13.0 +/- 0.2 and M' = 13.3 +/- 0.3 mag and estimate Log(base 10)(L/solar luminosity) = −3.76 +/- 0.06. Atmospheric models yield T(sub eff) = 1900(+100/−200) K. They do not set constrains on the surface gravity. "Hot-start" evolutionary models predict masses of 14(+25/−2) Jupiter mass based on the luminosity and temperature estimates, and considering a conservative age range for the system (30(+120/−10) million years). "warm-start" evolutionary tracks constrain the mass to M greater than or equal to 11 Jupiter mass. Conclusions. The mass of kappa Andromedae b mostly falls in the brown-dwarf regime, due to remaining uncertainties in age and mass-luminosity models. According to the formation models, disk instability in a primordial disk could account for the position and a wide range of plausible masses of kappa and b.

spectral energy distribution (SED)↗
NASA NTRS2016

Polarimetry and Flux Distribution in the Debris Disk Around HD 32297

We present high-contrast angular differential imaging (ADI) observations of the debris disk around HD32297 in H-band, as well as the first polarimetric images for this system in polarized differential imaging (PDI) mode with Subaru/HICIAO. In ADI, we detect the nearly edge-on disk at > or = 5(sigma) levels from approx. 0.45" to approx.1.7" (50-192AU) from the star and recover the spine deviation from the midplane already found in previous works. We also find for the first time imaging and surface brightness (SB) indications for the presence of a gapped structure on both sides of the disk at distances of approx. 0.75" (NE side) and approx. 0.65" (SW side). Global forward-modeling work delivers a best-fit model disk and well-fitting parameter intervals that essentially match previous results, with high-forward scattering grains and a ring located at 110AU. However, this single ring model cannot account for the gapped structure seen in our SB profiles. We create simple double ring models and achieve a satisfactory fit with two rings located at 60 and 95AU, respectively, low-forward scattering grains and very sharp inner slopes. In polarized light we retrieve the disk extending from approx. 0.25-1.6", although the central region is quite noisy and high S/N are only found in the range approx. 0.75-1.2". The disk is polarized in the azimuthal direction, as expected, and the departure from the midplane is also clearly observed. Evidence for a gapped scenario is not found in the PDI data. We obtain a linear polarization degree of the grains that increases from approx. 10% at 0.55" to approx. 25% at 1.6". The maximum is found at scattering angles of 90, either from the main components of the disk or from dust grains blown out to larger radii.

high-contrast angular differential imaging (ADI)↗
NASA NTRS1997

U-Groove Aluminum Weld Strength Improvement

Though butt-welds are among the most preferred joining methods in aerostructures, their strength dependence on inelastic mechanics is generally the least understood. This study investigated experimental strain distributions across a thick aluminum U-grooved weld and identified two weld process considerations for improving the multipass weld strength. One is the source of peaking in which the extreme thermal expansion and contraction gradient of the fusion heat input across the groove tab thickness produces severe angular distortion that induces bending under uniaxial loading. The other is the filler strain hardening decreasing with increasing filler pass sequences, producing the weakest welds on the last weld pass side. Both phenomena are governed by weld pass sequences. Many industrial welding schedules unknowingly compound these effects, which reduce the weld strength. A depeaking index model was developed to select filler pass thickness, pass numbers, and sequences to improve depeaking in the welding process. The result was to select the number and sequence of weld passes to reverse the peaking angle such as to combine the strongest weld pass side with the peaking induced bending tension component side to provide a more uniform stress and stronger weld under axial tensile loading.

Verderaime, V.↗
NASA NTRS2020

Measuring the Masses of Magnetic White Dwarfs: A NuSTAR Legacy Survey

The hard X-ray spectrum of magnetic cataclysmic variables can be modelled to provide a measurement of white dwarf mass. This method is complementary to radial velocity measurements, which depend on the (typically rather uncertain) binary inclination. Here we present results from a Legacy Survey of 19 magnetic cataclysmic variables with NuSTAR.We fit accretion column models to their 20–78 keV spectra and derive the white dwarf masses, finding a weighted average M(sub WD) = 0.77 ± 0.02 M(sub ⨀), with a standard deviation σ = 0.10 M(sub ⨀), when we include the masses derived from previous NuSTAR observations of seven additional magnetic cataclysmic variables. We find that the mass distribution of accreting magnetic white dwarfs is consistent with that of white dwarfs in non-magnetic cataclysmic variables. Both peak at a higher mass than the distributions of isolated white dwarfs and post-common-envelope binaries. We speculate as to why this might be the case, proposing that consequential angular momentum losses may play a role in accreting magnetic white dwarfs and/or that our knowledge of how the white dwarf mass changes over accretion–nova cycles may also be incomplete.

Novae↗
NASA NTRS1992

Structure in the COBE differential microwave radiometer first-year maps

Results of the first year of data from the differential microwave radiometers on the Cosmic Background Explorer are presented. Statistically significant structure that is well described as scale-invariant fluctuations with a Gaussian distribution is shown. The rms sky variation, smoothed to a total 10-deg FWHM Gaussian, is 30 +/-5 micro-K for Galactic latitude greater than 20-deg data with the dipole anisotropy removed. The rms cosmic quadrupole amplitude is 13 +/-4 micro-K. The angular autocorrelation of the signal in each radiometer channel and cross-correlation between channels are consistent and give a primordial fluctuation power-law spectrum with index of 1.1 +/-0.5, and an rms-quadrupole-normalized amplitude of 16 +/-4 micro-K. These features are in accord with the Harrison-Zel'dovich spectrum predicted by models of inflationary cosmology.

Smoot, G. F.↗
NASA NTRS1991

Regolith-structure modeling

Early lunar missions have provided a basic understanding of the physical and strength properties of lunar regolith, which have been shown to differ from those of dry terrestrial granular soils. Lunar regolith is predominantly a fine sand of which nearly 40 percent can be characterized as silt with a particle size smaller than 100 micrometers. The top 10 to 20 cm of the regolith can be characterized as being in a loose to medium-loose state. The density of the regolith, however, rapidly increases below a depth of 20 cm. The highly irregular and angular shapes of the regolith particles tend to interlock and create relatively strong mechanical bonds that give the particulate mass substantial cohesive properties and smaller amounts of tensile strength properties. In addition, the friction angle of lunar regolith at medium to high densities is quite high and often exceeds 55 degrees. These known properties of lunar regolith have been matched in a terrestrially-manufactured analog known as Minnesota Lunar Simulant. A variety of experiments were conducted using this simulant to both verify existing information and generate new information on the physical and constitutive properties of lunar regolith. These experiments include maximum and minimum density determinations, specific mass of solids, grain-size distribution, conventional triaxial compression and extension, isotropic compression, one-dimensional compression, direct shear, and direct tension. Direct shear experiments were conducted under atmospheric and vacuum conditions. Results of the physical and strength experiments compare closely to results obtained from lunar missions. Results of simulant strength experiments performed in vacuum indicated no observable difference from results obtained in air. A test bed currently under study is one involving a regolith shield covering a first-generation human habitat module. It is understood that regolith in depths ranging from 3 to 5 meters is required for radiation shielding for habitation and workspace. The habitat module is treated as a rigid cylindrical tube with a smooth exterior. By making the cylinder rigid, a complex interaction problem is reduced to a situation where we can consider the support regolith and the shielding regolith as behaving independently of the structural properties of the cylindrical structure. Medium-dense lunar simulant was placed around a scaled model of the habitat module to provide a radiation shield. This embankment-type shield was constructed in relatively thin but fine layers by compacting, by mechanical vibratory means, layer upon layer of simulant placed adjacent to the horizontally-aligned cylinder. The slope angles were constructed at 55 degrees. The model described above was studied in a geotechnical centrifuge, which allows for the scaling of model dimensions to prototype dimensions by increasing the acceleration of gravity on the model. The deformation response can be scaled up to prototype dimensions to provide an assessment of the deformation patterns of the lunar structure. The actual process of local and/or global growth of instabilities or skip planes can also be observed.

Ko, Hon-Yim↗
NASA NTRS1973

Some aspects of cosmic synchrotron sources

Synchrotron emission is considered from individual particles which have small pitch angles and the general properties of synchrotron sources which mainly contain such particles, as well as the emissivities and degrees of circular polarization for specific source distributions. The limitation of synchrotron source models for optical pulsars and compact extragalactic objects are discussed, and it is shown that several existing models for the pulsar NP 0532 are inconsistent with the measured time variations and polarizations of the optical emission. Discussion is made also of whether the low frequency falloffs in the extragalactic objects PKS 2134 + 004, OQ 208, and NGC 1068 is due to emission from particles with small pitch angles or absorption by a thermal plasma or synchrotron self-absorption. It is concluded that the absorption interpretations cannot account for the turnover in the spectrum of PKS 2134 + 004. Measurements of polarization, angular structure, and X-ray flux are also described.

Epstein, R. I.↗
NASA NTRS1972

Impulsive model for reactive collisions

A simple classical mechanical model of the reactive scattering of a structureless atom A and a quasi-diatomic BC is developed which takes full advantage of energy, linear and angular momentum conservation relations but introduces a minimum of further assumptions. These are as follows: (1) the vibrational degree of freedom of the reactant (BC) and product (AB) molecules is suppressed, so the change in vibrational energy is simply a parameter; (2) straight-line trajectories are assumed outside of a reaction shell; (3) within this zone, momentum transfer occurs impulsively (essentially instantaneously) following mass transfer; (4) the impulse, which may be either positive or negative, is directed along the BC axis, which may, however, assume all orientations with respect to the incident relative velocity. The model yields differential and total cross sections and product rotational energy distributions for a given collision exoergicity Q, or for any known distribution over Q. Numerical results are presented for several prototype reactions whose dynamics have been well-studied.

Marron, M. T.↗
NASA NTRS1975

Plasma phenomena at magnetic neutral points

A model of the plasma focus is considered, in which large axial electric fields are induced by the imploding current sheet during the final few nanoseconds of the collapse phase. This field provides a mechanism for creation of a beam of electrons of highly suprathermal energies. For this beam, the bremsstrahlung radiation is calculated, which is expected either from electron-deuteron collisions in the focused plasma itself or from the beam as it reaches the walls of the device. Comparison with experimental results indicates that the walls are the more likely source of these hard X-rays and also find qualitative agreement of the expected angular distribution of X-rays with experiment.

Sturrock, P. A.↗
NASA NTRSDate not supplied

Deflection of Solar Energetic Protons by an Ion Thruster

While Galactic Cosmic Rays (GCR) represent a long-term cancer risk to deep space human missions, Solar Energetic Particles (SEP) represent a significant acute radiation hazard to human spaceflight. This work investigates wave-particle interactions caused by the incidence of a beam of energetic protons, representing a notional SEP event, onto a cloud of ions representing a notional ion thruster plume. The resulting electromagnetic ion/ion instability is developed to investigate the degree to which energetic protons can be scattered out of the initial beam. This work includes investigations of deflection rate dependences on incident SEP energy and flux, ion thruster power and orientation relative to SEP incidence, plume ion species, and background plasma. Also investigated are the spectrum and angular distribution of electromagnetic radiation resulting from the wave-particle interactions. The primary objective of this investigation is to develop a technique for active mitigation of SEP radiation threats to spacecraft and crew, by exploring the wave-particle interaction of a SEP event with the plasma plume expelled from an ion thruster. Since the cost in expended fuel restricts this technique to intermittent use during interplanetary flights, effective prediction of when a SEP event might impact the mission is still important, and the observation of conditions that might lead to SEP events, human-in-the-loop space weather analyses, and development of SEP prediction models remain essential to crew safety, spacecraft function, and mission success.

Interplanetary Space Flight↗
NASA NTRS1981

High latitude H I shells in the Galaxy. I

A search has been made for H I shells in the 21-cm maps made by Heiles and Habing (1974) for absolute values of galactic latitude greater than 10 deg. A filter in the velocity dimension was used to enhance shell features over background gas. Positions, expansion velocities, column densities, and angular extents were measured for the 50 shells that were discovered. Incorporating distance estimates, masses and kinetic energies were estimated for the shells. A striking result was the failure of swept-up matter in a standard model for gas in the disk (density at the midplane approximately 1/cu cm; exponential scale height approximately 130 pc) to reproduce the observed shell column densities. While measured shell densities may be insufficiently corrected for background gas, the magnitude of this effect is too large to be explained by such a discrepancy alone. This may suggest that the shells seen in this survey occur in regions of relatively high density. The distribution of H I shells was compared with the distribution of other large-scale features in the Galaxy: H I shell structures are found to correlate with the positions of radio continuum loops I, II, and III, and to show little relation to the distribution of O and B stars.

Hu, E. M.↗
NASA NTRS1998

Polar Wind Measurements with TIDE/PSI and HYDRA on the Polar Spacecraft

The Thermal Ion Dynamics Experiment (TIDE) on the POLAR spacecraft has allowed sampling of the three-dimensional ion distributions with excellent energy, angular, and mass resolution. The companion Plasma Source Instrument, when operated, allows sufficient diminution of the electric potential to observe the polar wind at very high altitudes. In this presentation, we will describe the results of polar wind characteristics H+, He+, and 0+ as observed by TIDE at 5000 km and 8 RE altitudes. The relationship of the polar wind parameters with the solar zenith angle and with the day-night distance in the Solar Magnetic coordinate system will also be presented. We will compare these measurements with recent simulations of the photoelectron-driven polar wind using a couple fluid-semikinetic model. In addition, we will compare these polar wind observations with low-energy electrons sampled by the HYDRA experiment on POLAR to examine possible effects of the polar rain and photoelectrons and hopefully explain the large ion outflow velocity variations at POLAR apogee.

Su, Y. J.↗
NASA NTRS2016

The Strata-l Experiment on Microgravity Regolith Segregation

The Strata-1 experiment studies the segregation of small-body regolith through long-duration exposure of simulant materials to the microgravity environment on the International Space Station (ISS). Many asteroids feature low bulk densities, which implies high values of porosity and a mechanical structure composed of loosely bound particles, (i.e. the "rubble pile" model), a prime example of a granular medium. Even the higher-density, mechanically coherent asteroids feature a significant surface layer of loose regolith. These bodies will evolve in response to very small perturbations such as micrometeoroid impacts, planetary flybys, and the YORP effect. A detailed understanding of asteroid mechanical evolution is needed in order to predict the surface characteristics of as-of-yet unvisited bodies, to understand the larger context of samples from sample return missions, and to mitigate risks for both manned and unmanned missions to asteroidal bodies. Due to observation of rocky regions on asteorids such as Eros and Itokawa, it has been hypothesized that grain size distribution with depth on an asteroid may be inhomogeneous: specifically, that large boulders have been mobilized to the surface. In terrestrial environments, this size-dependent sorting to the surface of the sample is called the Brazil Nut Effect. The microgravity and acceleration environment on the ISS is similar that of a small asteroid. Thus, Strata-1 investigates size segregation of regolith in an environment analogous to that of small bodies. Strata-1 consists of four regolith simulants in evacuated tubes, as shown in Figure 1 (Top and Middle). The simulants are (1) a crushed and sieved ordinary chondrite meteorite to simulate an asteroidal surface, (2) a carbonaceous chondrite simulant with a mixture of fine and course particles, and two simplified silicate glass simulants; (3) one with angular and (4) another with spherical particles. These materials were chosen to span a range of granular complexity. The materials were sorted into three size species pre-launch, and maintained during launch and return by a device called the Entrapulator. The hypothesis under test is that the particles that constitute a granular medium in a micro-gravity environment, subjected to a known vibration environemnt, will segregate in accordance to modeled predictions. Strata-1 is currently operating on ISS, with cameras capturing images of simulant motion throughout the one year mission. Vibration data is recorded and downlinked, and the simulants will be analyzed after return to Earth.

Fries, M.↗
NASA NTRS2017

Evaluation of the VIIRS BRDF, Albedo and NBAR Products Suite and an Assessment of Continuity with the Long Term MODIS Record

Bidirectional Reflectance Distribution Function (BRDF) model parameters, Albedo quantities, and Nadir BRDF Adjusted Reflectance (NBAR) products derived from the Visible Infrared Imaging Radiometer Suite (VIIRS), on the Suomi-NPP (National Polar-orbiting Partnership) satellite are evaluated with spatially representative in situ tower albedometer measurements and through comparison with the MODerate Resolution Imaging Spectroradiometer (MODIS) long term record. White Sky Albedo (WSA), Black Sky Albedo (BSA), NBAR, and Quality Assurance (QA) results show that the VIIRS algorithm is performing well at the global scale and is able to provide global data products comparable with the heritage MODIS (with an absolute bias of 0.0069 for shortwave broadband WSA) despite the spectral, angular, and effective spatial resolution differences between the two sensors. Both VIIRS and MODIS albedo are shown to agree well with in situ albedo measurements at a number of spatially representative sites. This evaluation provides confidence that the high quality, daily VIIRS BRDF model parameters, Albedo, and NBAR products will be able to provide the long term continuity required by the modeling and monitoring communities.

VIIRS↗