Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomic fabrication”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Micro-Mechanically Guided High-Throughput Alloy Design Exploration Towards Metastability-Induced H Embrittlement Resistance

We develop a high-throughput approach for studying H embrittlement (HE)-resistance in alloys, which is based on combinatorial compositional screening of metastability effects by in situ scanning electron microscopy H-analyses. The project objective included: (i) technique development of high-throughput screening (HTS) for HE-resistance, (ii) discovery of new metallic materials with superior HE-resistance, (iii) Multiscale verification of HE-resistance of the new alloys and H-barrier layers, from atomic scale to an engineering scale. The investigation focused on a model system that enables exploration of different metastable states in Fe-based complex-concentrated alloys. Composition spread islands with hundreds of varying compositions are fabricated on a single substrate using a combinatorial co-sputtering technique. To screen these alloys, we developed and employed a home-built SEM-based integrated analysis system capable of characterizing H-permeability, H-trapping, H-influence on mechanical properties, and other material properties, as well as atomistic to continuum simulations to study the underlying physics.

08 HYDROGEN↗
DOE OSTI2024

Sequential infiltration of two-photon polymerized 3D photonic crystals for mid-IR spectroscopic applications

Photonic crystals (PhCs) are spatially organized structures with lattice parameters equivalent to the operational wavelength of light. PhCs have been subject to extensive research efforts in the last two decades and are known for controlling light propagation with applications in sensing and time-delayed communication due to the slow-light phenomenon. Despite their exceptional properties, PhCs are difficult to fabricate using planar micromachining techniques due to their periodic structures. Techniques like two-photon stereolithography have been discussed for PhC fabrication in the literature, but the inherent disadvantage of poor refractive index (RI) contrast results in limited application. In this work, we present sequential infiltration synthesis performed on two-photon stereolithographically printed 3D PhCs for infiltration with zinc oxide to increase the RI of 3D PhCs. Further, finite element analysis was performed over a range of RI contrast values to study the change in photonic bandgap (PBG) with RI contrast. The transmission spectra were recorded on 3D PhCs before and after infiltration to demonstrate the change experimentally. An increase in the PBG width and absorbance is seen postinfiltration due to enhanced RI. This work presents the first, to our knowledge, sequentially infiltrated enhanced 3D PhC fabricated with two-photon stereolithography.

3D printing↗
DOE OSTI2026

Oxygen Distribution and Segregation at Grain Boundaries in Nb and Ta-Encapsulated Nb Thin Films for Superconducting Qubits

We report on atomic-scale analyses of oxygen distribution and segregation at grain boundaries (GBs) of Nb and Ta-encapsulated Nb (Ta/Nb) thin films for superconducting qubits using atom probe tomography (APT) and transmission electron microscopy (TEM). We observe oxygen segregation at grain boundaries (GBs) relative to the oxygen concentration within the grains for both Nb and Ta-capped Nb thin films and find that a higher oxygen concentration in the interior of Nb grains leads to greater oxygen segregation levels at GBs. This finding reveals that the formation of a local equilibrium of oxygen concentration between GBs and grain interiors of Nb is the primary driving force of the oxygen segregation behaviors in Nb and Ta-capped Nb. The enrichment factors (CGB/Cgrain) for oxygen segregation at GBs in Nb and Ta-capped Nb range from 2.4 ± 0.3 to 2.7 ± 0.4. The current results also highlight that controlling oxygen impurities in Nb during film deposition and fabrication processing is important to concomitantly reducing the level of oxygen segregation at GBs in Nb. Finally, we find that increases in the oxygen concentration in both Nb grains and GBs correlate with a suppression in the critical temperature for superconductivity (Tc). Together, our comparative chemical and charge transport property analyses provide atomic-scale insights into a potential mechanism, contributing to the decoherence in superconducting qubits.

Lee, Jaeyel [Fermilab] (ORCID:0000000185429612)↗
DOE OSTI2021

DOE Plasma Science Center - Predictive Control of Plasma Kinetics: Multi-Phase and Bounded Systems (Final Report DE-SC0001939)

Low temperature plasmas (LTPs) are the plasmas of electron-volt (eV) physics and eV technologies. LTPs have characteristic electron temperatures of a few eV and fractional ionizations that are typically small. Since LTPs have electron temperatures commensurate with the threshold energies of excited states in neutral atoms and molecules, power transfer from electrons to these atoms and molecules efficiently produces activated species (e.g., radicals, excited states, photons). Acceleration of ions in the sheaths of LTPs to energies of tens to hundreds of eV enable activation of surface modifying processes – sputtering, etching, deposition. With such properties, LTPs are often and beneficially used in technological devices, ranging from etching and deposition in microelectronics and solar cell fabrication, to hardening of surgical instruments. LTPs harbor fundamental science issues that are intellectually challenging and rewarding. At the same time, there are enormous societal benefits that are enabled by LTPs. The entire present-day and future information technology infrastructure owes its very existence to LTPs. Renewable energy sources, such as solar cell arrays, could not be economically produced in the absence of deposition and etching by LTPs. In acknowledgment of the importance of LTPs, the DOE Office of Fusion Energy Sciences supported the Plasma Science Center for Predictive Control of Plasma Kinetics: Multi-Phase and Bounded Systems from August 2009 to July 2021, consisting of an initial 5-year grant, 3 funded extensions and 2 no-cost extensions. This is the final report of the Center in which the productivity of the Center is discussed in terms of publications, impact and personnel. High-lights of the research performed in the Center are provided.

36 MATERIALS SCIENCE↗
DOE OSTI2020

α-U and ω-UZr 2 in neutron irradiated U-10Zr annular metallic fuel

Here, to develop metallic fuel with ultra-high burnup of 30%-40%, an annular U-10Zr fuel with 55% smear density was fabricated through a casting route and irradiated at the Advanced Test Reactor at Idaho National Laboratory. The annular fuel design also serves as a demonstration of the feasibility to replace sodium bond with a helium bond to benefit the geological disposal of irradiated fuel, cut the cost of fuel fabrication, and boost the overall metallic fuel economy. This paper reports the results from transmission electron microscopy (TEM) based post-irradiation examination of this fuel type irradiated to a burnup of 3.3% fissions per initial heave metal atoms for initial screening purpose. After irradiation, the initial U-10Zr separated into an a-U annular region and an UZr 2+x center region with nanoscale spinodal decomposed microstructure. Because of the provided large amount of coherent interface areas, the fission gas atoms and vacancies generated in UZr 2+x phase are possibly pinned at the interface areas, leading to 20 times smaller fission gas bubbles than those in the neighboring a-U. The large bubbles in a-U become connected and merged into large pores that provide fast release paths for fission gas which prevents further fuel swelling. The fuel center still has open space to accommodate further fuel swelling from solid fission products at higher burnup. Other neutron irradiation induced phase and microstructure change are also characterized and compared with traditional solid fuel designs.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Electropolymerized-molecularly imprinted polymers (E-MIPS) as sensing elements for the detection of dengue infection

Here, a straightforward in situ detection method for dengue infection was demonstrated through the molecular imprinting of a dengue nonstructural protein 1 (NS1) epitope into an electropolymerized molecularly imprinted polyterthiophene (E-MIP) film sensor. The key enabling step in the sensor fabrication is based on an epitope imprinting strategy, in which short peptide sequences derived from the original target molecules were employed as the main template for detection and analysis. The formation of the E-MIP sensor films was facilitated using cyclic voltammetry (CV) and monitored in situ by electrochemical quartz crystal microbalance (EC-QCM). Surface properties were analyzed using different techniques including atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and polarization modulation-infrared reflection-adsorption (PM-IRRAS). The standard calibration curve (R = 0.9830) was generated for the detection of the epitope, Ac-VHTWTEQYKFQ-NH 2 , with a linear range of 0.2 to 30 μg/mL and detection limit of 0.073 μg/mL. A separate calibration curve (R = 0.9786) was obtained using spiked buffered solutions of dengue NS1 protein, which resulted in a linear range of 0.2 to 10 μg/mL and a detection limit of 0.056 μg/mL. The fabricated E-MIP sensor exhibited long-term stability, high sensitivity, and good selectivity towards the targeted molecules. These results indicated that the formation of the exact and stable cavity imprints in terms of size, shape, and functionalities was successful. In our future work, we aim to use our E-MIP sensors for NS1 detection in real-life samples such as serum and blood.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Dislocation-Assisted Quasi-Two-Dimensional Semiconducting Nanochannels Embedded in Perovskite Thin Films

Defect engineering in perovskite thin films has attracted extensive attention recently due to the films’ atomic-scale modification, allowing for remarkable flexibility to design novel nanostructures for next generation nanodevices. However, the defect-assisted three-dimensional nanostructures in thin film matrices usually has large misfit strain and thus causes unstable thin film structures. In contrast, defect-assisted one- or two-dimensional nanostructures embedded in thin films can sustain large misfit strains without relaxation, which make them suitable for defect engineering in perovskite thin films. Here, we reported the fabrication and characterization of edge-type misfit dislocation-assisted two-dimensional BiMnO x nanochannels embedded in SrTiO 3 /La 0.7 Sr 0.3 MnO 3 /TbScO 3 perovskite thin films. The nanochannels are epitaxially grown from the surrounding films without noticeable misfit strain. Diode-like current rectification was spatially observed at nanochannels due to the formation of Schottky junctions between BiMnO x nanochannels and conducting La 0.7 Sr 0.3 MnO 3 thin films. Such atomically scaled heterostructures constitute more flexible ultimate functional units for nanoscale electronic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Atoms to fibers: Identifying novel processing methods in the synthesis of pitch-based carbon fibers

Understanding and optimizing the key mechanisms used in the synthesis of pitch-based carbon fibers (CFs) are challenging, because unlike polyacrylonitrile-based CFs, the feedstock for pitch-based CFs is chemically hetero- geneous, resulting in complex fabrication leading to inconsistency in the final properties. In this work, we use molecular dynamics simulations to explore the processing and chemical phase space through a framework of CF models to identify their effects on elastic performance. The results are in excellent agreement with experiments. We find that density, followed by alignment, and functionality of the molecular constituents dictate the CF mechanical properties more strongly than their size and shape. Last, we propose a previously unexplored fabrication route for high-modulus CFs. Unlike graphitization, this results in increased sp 3 fraction, achieved via generating high-density CFs. In addition, the high sp 3 fraction leads to the fabrication of CFs with isometric compressive and tensile moduli, enabling their potential applications for compressive loading.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

PbI 2 Nanocrystal Growth by Atomic Layer Deposition from Pb(tmhd) 2 and HI

Atomic layer deposition (ALD) allows for fine control over the thickness, stoichiometry, and structural defects of materials. ALD provides a suitable route to deposit lead halides, which can further be converted to perovskites for photovoltaics, photoemission, and photodetection, among other applications. Deposition of lead halides by ALD has already begun to be explored; however, the precursors used in published processes are highly hazardous, require expensive fabrication processes, or contain impurities that can jeopardize the optoelectronic properties of metal halide perovskites after conversion. In this work, we deposited lead iodide (PbI 2 ) by a facile ALD process involving only two readily accessible and low-cost precursors. PbI 2 nanocrystals were grown on soda-lime glass (SLG), silicon dioxide support grids, and silicon wafer substrates and provided the groundwork for further investigation into developing lead halide perovskite processes by ALD. Further, the ALD-grown PbI 2 was characterized by annular dark-field scanning transmission electron microscopy (ADF-STEM), atomic force microscopy (AFM), high resolution transmission electron microscopy (HRTEM), X-ray fluorescence (XRF), and X-ray photoemission spectroscopy (XPS), among other methods. This work presents the first step to synthesize lead halide perovskites with atomic control for applications such as interfacial layers in photovoltaics and for deposition in microcavities for lasing.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Fine-Tuning of Pt Dispersion on Al 2 O 3 and Understanding the Nature of Active Pt Sites for Efficient CO and NH 3 Oxidation Reactions

Fine-tuning the dispersion of active metal species on widely used supports is a research hotspot in the catalysis community, which is vital for achieving a balance between the atomic utilization efficiency and the intrinsic activity of active sites. In this work, using bayerite Al(OH) 3 as support directly or after precalcination at 200 or 550 °C, Pt/Al 2 O 3 catalysts with distinct Pt dispersions from single atoms to clusters (ca. 2 nm) were prepared and evaluated for CO and NH 3 removal. Richer surface hydroxyl groups on AlO x (OH) y support were proved to better facilitate the dispersion of Pt. However, Pt/Al 2 O 3 with relatively lower Pt dispersion could exhibit better activity in CO/NH 3 oxidation reactions. Further reaction mechanism study revealed that the Pt sites on Pt/Al 2 O 3 with lower Pt dispersion could be activated to Pt 0 species much easier under the CO oxidation condition, on which a higher CO adsorption capacity and more efficient O 2 activation were achieved simultaneously. Compared to Pt single atoms, PtO x clusters could also better activate NH 3 into –NH 2 and –HNO species. The higher CO adsorption capacity and the more efficient NH 3 /O 2 activation ability on Pt/Al 2 O 3 with relatively lower Pt dispersion well explained its higher CO/NH 3 oxidation activity. This study emphasizes the importance of avoiding a singular pursuit of single-atom catalyst synthesis and instead focusing on achieving the most effective Pt species on Al 2 O 3 support for targeted reactions. Finally, this approach avoids unnecessary limitations and enables a more practical and efficient strategy for Pt catalyst fabrication in emission control applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Effect of substrate temperature on the growth of Nb$_3$Sn film on Nb by multilayer sputtering

Nb3Sn films were fabricated by multilayer sequential sputtering on Nb substrates at substrate temperatures ranging from room temperature to 250 °C. The film material properties were characterized by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, atomic force microscopy, and transmission electron microscopy. The films’ superconducting properties were studied by four-point probe resistivity measurements from room temperature to below the superconducting critical temperature Tc. The highest Tc was17.76 K, when the multilayers were deposited at room temperature. A superconducting Nb3Sn thin film with a smoother surface morphology but a lower Tc of 17.58 K was obtained on the film deposited at a substrate temperature of 250 °C.

Sayeed, Md. Nizam↗
DOE OSTI2022

A Review on the State of the Art of Machine Learning and Satellite Imaging: Detecting Scene Changes in Selected Nuclear Fuel Cycle Datasets

The timely detection of clandestine nuclear facilities is one of the greatest challenges faced by the International Atomic Energy Agency’s (IAEA). Idaho National Laboratory is currently applying machine learning (ML) to existing satellite imagery (SI) datasets to find facilities within the nuclear fuel life cycle, with primary focus placed on identifying critical predecessor (i.e., fuel fabrication and fuel enrichment) and successor (i.e., nuclear power plants) facilities. This could provide a satellite image methodology that the IAEA could leverage to discover clandestine facilities. The work presented in this paper describes the evolution of a workflow developed by this team for object detection related to critical infrastructure by expanding that workflow for the purpose of identifying nuclear fuel cycle components and automating dependency assessments. This will be done using two methods housed within a single pipeline. The first method involves implementing a DenseNet161 convolutional neural network to classify the images and explain the results using Local Interpretable Model-Agnostic Explanations (LIME). The second method implements You Only Look Once version 5 (YoloV5), to detect objects within images, provide a probability for the detection, and provide a bounding box that corresponds to the object of interest. The results of this work are anticipated to provide a clear picture of this portion of the nuclear fuel cycle and perform as a stand-alone tool for image assessment that can be expanded to additional fuel cycle components and implemented in international safeguards and national security domains. This capability addresses the IAEA’s need to detect undeclared nuclear materials and activities within a state while encompassing the entire nuclear fuel cycle.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Fe-single-atom catalyst nanocages linked by bacterial cellulose-derived carbon nanofiber aerogel for Li-S batteries

Li-S battery (LSB) is promising for achieving high capacity. Still, its development is hindered by the complex redox process with sluggish kinetics and particularly the resulting lithium polysulfides (LiPS) shuttle effects. Single-atom catalysts (SACs), with their maximized atom utilization, could effectively chemisorb soluble LiPSs and expedite the sulfide conversion reaction kinetics. Here we report incorporating Fe single metal atom catalyst (Fe-SAC) in the sulfur cathode design and its electrocatalytic effects. Fe-doped ZIF-8 nanocages were introduced into a cheap biomass bacteria cellulose. A pyrolysis process converted them into an aerogel structure with Fe-SAC-functionalized N-doped carbon nanocages linked by a carbon nanofiber network (FeSA-NC@CBC), which was applied as a scaffold to fabricate freestanding and binder-free sulfur cathodes. He we conducted electrochemical measurements to reveal Fe-SAC functions including lowering energy barriers for S 8 reduction to liquid-phase LiPSs and further to solid-phase Li 2 S 2 /Li 2 S and accelerating Li 2 S 2 /Li 2 S nucleation and deposition, as corroborated by our theoretical calculation results. Benefiting from the synergistic effects of highly active Fe-SAC and three-dimensional conductive network, the sulfide reaction kinetics is improved, which can diminish LiPS shuttle effects and therefore improve LBS rate performance and cycling stability. Accordingly, the fabricated FeSA-NC@CBC composite cathode delivers an excellent rate capability at 2C with a reversible capacity of 840 mAh/g and a long-term cyclic stability of 800 mAh/g at 1C after 500 cycles.

25 ENERGY STORAGE↗
DOE OSTI2020

X-ray verification of sol-gel resist shrinkage in substrate-conformal imprint lithography for a replicated blazed reflection grating

Surface-relief gratings fabricated through nanoimprint lithography (NIL) are prone to topographic distortion induced by resist shrinkage. Characterizing the impact of this effect on blazed diffraction efficiency is particularly important for applications in astrophysical spectroscopy at soft x-ray wavelengths ( λ ≈ 0.5 − 5 nm) that call for the mass-production of large-area grating replicas with sub-micron, sawtooth surface-relief profiles. A variant of NIL that lends itself well for this task is substrate-conformal imprint lithography (SCIL), which uses a flexible, composite stamp formed from a rigid master template to imprint nanoscale features in an inorganic resist that cures thermodynamically through a silica sol-gel process. While SCIL enables the production of several hundred imprints before stamp degradation and avoids many of the detriments associated with large-area imprinting in NIL, the sol-gel resist suffers shrinkage dependent on the post-imprint cure temperature. Through atomic force microscopy and diffraction-efficiency testing at beamline 6.3.2 of the Advanced Light Source, the impact of this effect on blaze response is constrained for a ∼160-nm-period grating replica cured at 90 ° C. Results demonstrate a ∼2 ° reduction in blaze angle relative to the master grating, which was fabricated by anisotropic wet etching in 〈311〉-oriented silicon to yield a facet angle close to 30 ° .

McCoy, Jake A. (ORCID:0000000216057517)↗
DOE OSTI2020

Robustness of Optical Response for Self-Assembled Plasmonic Metamaterials with Morphological Disorder and Surface Roughness

Bottom-up fabrication of metallized biotemplated nanostructures to form specific plasmonic nanoresonators holds promise as a means of achieving large-scale optical metamaterials. However, in contrast to top-down methods, the stochastic growth of self-assembled nanoresonators is prone to significant disorder and surface roughness, which naturally raise an important question about the robustness of their resonant properties in terms of structural imperfections. An aggregated-random-sphere model is developed to mimic the nucleated growth of metallized DNA origami assembly, leading to meta-atoms with realistic, experimentally observed morphological disorder and surface roughness. Using the well-known split-ring-resonator (SRR) motif as an example, the resonant properties of meta-atoms under different levels of roughness are investigated and a strong tolerance of optical response against morphological disorder is revealed. It is found that in SRRs, even with dramatic roughness introduced, the expected resonances are still observed, despite broadening line shapes compared to ideal smooth structure. Only for extreme disorder, which causes drastic segmentation of SRRs, does the resonant response disappear. Finally, the demonstrations are very encouraging for the prospects of bottom-up fabrication toward versatile functional metamaterials and metadevices.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Single-atom materials boosting wearable orthogonal uric acid detection

Abstract Uric acid (UA) is a vital biomarker for the diagnosis and management of various health conditions, including cardiovascular diseases, gout, kidney disorders, metabolic syndrome, and wound healing. Despite significant advances in wearable sensor technology, challenges persist in developing wearable sensors that are capable of maintaining high sensitivity, selectivity, and stability. In this study, we present an epidermal sensing platform enhanced with single-atom materials (SAMs) designed for flexible and orthogonal electrochemical detection of UA. We designed and synthesized an SAM with Fe-N 5 active sites to boost the electrochemical sensing signals, integrating it with laser-engraved graphene (LEG) to fabricate a wearable SAM-based UA patch sensor. This design provides superior UA detection performance compared to sensors based on conventional nanomaterials. In addition, we enhanced the detection accuracy and range by using an orthogonal approach that combines direct oxidation through differential pulse voltammetry (DPV) along with parallel biocatalytic amperometric detection. The resulting SAM-based UA orthogonal sensor patch demonstrated exceptional performance in wearable applications through tests measuring sweat UA levels in subjects before and after consuming a purine-rich diet. Graphical Abstract

Ding, Shichao↗
DOE OSTI2023

Bias-pulsed atomic layer etching of 4H-silicon carbide producing subangstrom surface roughness

A new approach to atomic layer etching (ALE) has been demonstrated, and its application to 4H-SiC is reported here. By pulsing only the DC bias for an Ar/Cl2 inductively coupled plasma-reactive ion etching system, the etch cycle duration is reduced by more than an order of magnitude relative to conventional ALE processes. Gas flows are not changed throughout the ALE process. With this process protocol, we achieved an etch rate of 2.48±0.09 Å/cycle with 6 s cycles, an RMS surface roughness (Rq) of 0.83±0.08 Å, and an ALE synergy value of S = 99%. The parameters explored within this ALE process demonstrate effective subangstrom smoothening of 4H-SiC surfaces and is well-suited for a variety of classical and quantum device nanofabrication.

42 ENGINEERING↗
DOE OSTI2023

From Deposition to Encapsulation: Roll-to-roll manufacturing of organic light emitting devices for lighting (Final Report)

Organic light emitting devices (OLEDs) are promising solid state light sources due to their high efficiency, high color quality and flexible form factors. The key to enable low cost OLED lighting, is to rapidly fabricate thin film organic layers on a continuous flexible roll, called R2R processing. This project aims to investigate the feasibility of mass production of OLED lighting using the R2R process, from deposition to encapsulation. A high efficiency white OLED is fabricated on 10 cm-wide substrate rolls in a pilot R2R tool comprising of two different organic deposition: vacuum thermal evaporation (VTE) and organic vapor phase deposition (OVPD). A high quality encapsulation process to package OLEDs is demonstrated using an atomic layer deposition tool integrated to the R2R system without air exposure. The method to achieve ultrahigh deposition rates required by R2R processing is demonstrated by OVPD. Uniform organic semiconductor thin films grown by OVPD at rates as high as 50 Å/s are achieved. A comprehensive numerical model that is capable of simulating complex, multilayer WOLED structures is developed to provide an alternative to experimental iterations of OLED design and tests. A cost estimate on the R2R production of WOLEDs for lighting is developed. Assuming a WOLED luminance of 10 klm/m 2 , the cost of a WOLED light engine is anticipated to be $\$ 12.5$ /klm. With incremental reduction in material and driver costs and improved luminance, the cost of WOLED lighting can be reduced to $\$ 6.3$ /klm in the near term. These findings suggest OLED lighting can be volume manufactured by R2R vapor deposition methods with much reduced costs compared to current batch processing methods, potentially positioning WOLEDs for use in numerous premium lighting applications.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗