Search NASA⌕ Search

SEARCH · Search NASA

Results for “binary devices”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Polymer Nanoparticle Superlattices for Organic Photovoltaic Applications

In this Perspective, we discuss the possibility of constructing binary nanoparticle superlattices for organic photovoltaic applications and some of the interesting new photophysics emerging from preliminary studies. We summarize recent advances in nanoparticle preparation and photophysical characterization and some of the very interesting observed departures from thin-film photoluminescence dynamics. We conclude by discussing some of the challenges ahead and the possibility of new emergent physics in the assembly of polymer nanoparticles into functional devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

O3BNN-R: An Out-Of-Order Architecture for High-Performance and Regularized BNN Inference

Binarized Neural Networks (BNN) have drawn tremendous attention due to significantly reduced computational complexity and memory demand. They have especially shown great potential in cost- and power-restricted domains, such as IoT and smart edge-devices, where reaching a certain accuracy bar is often sufficient, and real-time is highly desired.In this work, we demonstrate that the highly-condensed BNN model can be shrunk significantly further by dynamically pruning irregular redundant edges. Based on two new observations on BNN-specific properties, an out-of-order (OoO) architecture – O3BNN-R, can curtail edge evaluation in cases where the binary output of a neuron can be determined early. Similar to Instruction-Level-Parallelism(ILP), these fine-grained, irregular, runtime pruning opportunities are traditionally presumed to be difficult to exploit. In order to increase the pruning opportunities, we also optimize the training process by adding 2 regularization items in the loss function (1) for pooling pruning and (2) for threshold pruning. We evaluate our design on an FPGA platform using three well-known networks, including VggNet-16, AlexNet for ImageNet, and a VGG-like network for Cifar-10.

Geng, Tong↗

Beyond Binary: Automated PLC Memory Forensics through RGB Image Analysis and Deep Learning

The introduction of Industry 4.0 and the evolution of industrial control systems (ICS) to adopt Internet-based technologies enhanced productivity, but have inadvertently increased their vulnerability to cyber-based malicious attacks. When an ICS system is compromised, security analysts need to identify the root cause quickly to start the recovery process and develop mitigation strategies to safeguard against future instances. Memory forensics is critical in the analysis process to ascertain what occurred. To date, approaches to analyze the persistent memory in ICS devices are limited, and almost nonexistent for volatile memory. This paper proposes an automated methodology, COMA, for PLC memory dump analysis using computer vision and deep learning techniques. Specifically, COMA converts the sequences of bytes in a PLC memory dump to RGB pixels and creates a deep learning model that learns the underlying patterns and features of pre-labeled forensic artifacts in images and segments them into distinct regions. COMA then uses the trained model to automatically segment new memory images and extract forensic artifacts. We evaluate COMA on a Schneider Electric Modicon M221 PLC involving two cyber-based attack scenarios: (i) code injection and (ii) code modification. The empirical results show that COMA can successfully detect attack artifacts in memory dumps in both scenarios.

Asmar Awad, Rima↗

First photometric study of the very short period K-type contact binary 1SWASP J064501.21+342154.9

The first high precision CCD photometric light curves of 1SWASP J064501.21+342154.9 were obtained in 2013 February along with several new times of minimum light. The multi-color light curves were analyzed using the Wilson-Devinney code. Photometric solutions reveal that the system is a W-type shallow contact binary with a mass ratio of q = 2.110 ± 0.007 and a degree of contact of f = 15.3% ± 2.1%. A third light contributing about 2% of the total luminosity in the I band was found. It may come from a cool tertiary component. A small spot found on the surface of the binary indicates that the solar-like activities are at a low level at present.

79 ASTRONOMY AND ASTROPHYSICS↗

Ternary Blended Fullerene‐Free Polymer Solar Cells with 16.5% Efficiency Enabled with a Higher‐LUMO‐Level Acceptor to Improve Film Morphology

Abstract Ternary approaches to solar cell design utilizing a small bandgap nonfullerene acceptor as the near infrared absorber to increase the short‐circuit current density always decreases the open‐circuit voltage. Herein, a highly efficient polymer solar cell with an impressive efficiency of 16.28 ± 0.20% enabled by an effective voltage‐increased ternary blended fullerene‐free material approach is reported. In this approach, the structural similarity between the host and the higher‐LUMO‐level guest enables the two acceptors to be synergized, obtaining increased open‐circuit voltage and fill factor and a small increase of short‐circuit current density. The same beneficial effects are demonstrated by using two host binary systems. The homogeneous fine film morphologies and the π–π stacking patterns of the host blend are well maintained, while larger donor and acceptor phases and increased lamellar crystallinity, increased charge mobilities, and reduced monomolecular recombination can be achieved upon addition of the guest nonfullerene acceptor. The increased charge mobilities and reduced monomolecular recombination not only contribute to the improved fill factor but also enable the best devices to be fabricated with a relatively thicker ternary blended active layer (110 vs 100 nm). This, combined with the absorption from the added guest acceptor, contribute to the increased short‐circuit current.

Li, Kun↗

Regulating crystallization to maintain balanced carrier mobility via ternary strategy in blade-coated flexible organic solar cells

Regulating the crystallization of donor and acceptor to maintain balanced carrier mobility is of great importance to fabricate efficient organic solar cells (OSCs). Herein, the balanced crystallinity between donor and acceptor was finely controlled in blade-coated OSCs. By adding high crystalline FOIC into PBDB-T:ITIC system, a balanced carrier mobility was achieved, resulting in the much improved fill factor. The optimized ternary device exhibits an increased current density, due to the enhanced light-harvesting efficiency with complementary absorption and the morphology change. Morphology characterization demonstrated that the ternary film exhibits a highly balanced crystallinity between the donor and acceptor on account of the formation of acceptor alloy. Moreover, the ternary film not only possesses a small domain size, but also exhibits a high domain purity as compared to both binary films. Encouragingly, a highest power conversion efficiency (PCE) of 10.68% was obtained for the blade-coated ternary OSCs. In addition, the blade-coated flexible large-area (105 mm 2 ) OSC based on PBDB-T:ITIC:FOIC ternary system also exhibits a high PCE of 9.81%, showing great potential in the high-throughput fabrication of OSCs.

14 SOLAR ENERGY↗

Robust Large Gap Two-Dimensional Topological Insulators in Hydrogenated III–V Buckled Honeycombs

A large gap two-dimensional (2D) topological insulator (TI), also known as a quantum spin Hall (QSH) insulator, is highly desirable for low-power-consuming electronic devices owing to its spin-polarized backscattering-free edge conducting channels. Although many freestanding films have been predicted to harbor the QSH phase, band topology of a film can be modified substantially when it is placed or grown on a substrate, making the materials realization of a 2D TI challenging. In this work we report a first-principles study of possible QSH phases in 75 binary combinations of group III (B, Al, Ga, In, and Tl) and group V (N, P, As, Sb, and Bi) elements in the 2D buckled honeycomb structure, including hydrogenation on one or both sides of the films to simulate substrate effects. A total of six compounds (GaBi, InBi, TlBi, TlAs, TlSb, and TlN) are identified to be nontrivial in unhydrogenated case; whereas for hydrogenated case, only four (GaBi, InBi, TlBi, and TlSb) remains nontrivial. The band gap is found to be as large as 855 meV for the hydrogenated TlBi film, making this class of III–V materials suitable for room temperature applications. TlBi remains topologically nontrivial with a large band gap at various hydrogen coverages, suggesting the robustness of its band topology against bonding effects of substrates.

2D topological insulators↗

Elastic Scattering of Mo-Mo, Mo-S and S-S Atomic Pairs in the Relative Kinetic Energy Range of 2–200 eV

The interatomic binary potentials of Mo-Mo, Mo-S and S-S, approved by Molecular Dynamics, were used to calculate elastic phase shifts and cross sections of the atomic pairs in the relative kinetic energy range of 2–200 eV. It is expected the obtained differential and integral cross sections to be of help to describe sputtering of MoS{sub 2} nanometer layers in design of perspective devices of nanoelectronics and photonics.

74 ATOMIC AND MOLECULAR PHYSICS↗

Exploring the physics of cesium lead halide perovskite quantum dots via Bayesian inference of the photoluminescence spectra in automated experiment

The unique optoelectronic properties of metal halide perovskite quantum dots (QDs) make them promising candidates for applications in light-emitting diodes (LEDs), scintillators, and other photonic devices. The automated micropipetting synthesis platform equipped with an optical reader enables the opportunity for high throughput synthesis and photoluminescent (PL) characterization of metal halide perovskite QDs for the first time. Here, we explore the compositional dependence of the PL behavior and stability of the combinatorial library of cesium lead halide (CsPbX 3 ) perovskites QDs via the automated platform. To study the stability of synthesized QDs in the binary and ternary configurations, we study the time-dependent PL properties using previously developed machine learning analysis. Additionally, to systematically explore the PL behavior in the ternary CsPbX 3 QDs system, we introduce the Bayesian inference framework that allows the probabilistic fit of multiple models to the PL data and establishes both optimal model and model parameter robustly. Furthermore, these behaviors can be used as a control parameter for the navigation of the multidimensional compositional spaces in automated synthesis. Furthermore, this analysis shows the nonuniformity of the PL peak behavior in the ternary CsPbX 3 QDs system. Further, the analysis confirms narrow size distribution and good quality of CsPbBr 3 QDs alloyed with low concentrations of iodide and chloride. We note that Bayesian Inference fit parameters can be further used as a control signal for navigation of the chemical spaces in automated synthesis.

36 MATERIALS SCIENCE↗

Asymptotic Behavior of Memristive Circuits

The interest in memristors has risen due to their possible application both as memory units and as computational devices in combination with CMOS. This is in part due to their nonlinear dynamics, and a strong dependence on the circuit topology. We provide evidence that also purely memristive circuits can be employed for computational purposes. In the present paper we show that a polynomial Lyapunov function in the memory parameters exists for the case of DC controlled memristors. Such a Lyapunov function can be asymptotically approximated with binary variables, and mapped to quadratic combinatorial optimization problems. This also shows a direct parallel between memristive circuits and the Hopfield-Little model. In the case of Erdos-Renyi random circuits, we show numerically that the distribution of the matrix elements of the projectors can be roughly approximated with a Gaussian distribution, and that it scales with the inverse square root of the number of elements. This provides an approximated but direct connection with the physics of disordered system and, in particular, of mean field spin glasses. Using this and the fact that the interaction is controlled by a projector operator on the loop space of the circuit. We estimate the number of stationary points of the approximate Lyapunov function and provide a scaling formula as an upper bound in terms of the circuit topology only.

97 MATHEMATICS AND COMPUTING↗

AGGREGATE: dAta-driven modelinG preservinG contRollable dEr for outaGe mAnagemenT and rEsiliency (Final Report)

The AGGREGATE project team successfully developed and validated various modules for outage management. Brief summaries of each module are provided to showcase their strength for outage management and restoration for a distribution system with a high penetration of connected distribution energy resources (DERs). In recent years, inverter-based DERs have been widely deployed in distribution system. A most of behind-the-meter (BTM) solar power generation is not visible to the utility. The data-driven DER and load estimation modules are using machine learning (ML) and artificial intelligence (AI) to manage this issue, which provides an opportunity for distribution system operators (DSOs) to operate systems and make decisions in real-time for a distribution system with a high penetration of DERs deployed. Also, the estimated DER and true load can be further leveraged in network aggregation and cold-load pick up estimation for reducing the computing complexity and providing for fast restoration. After load demand and DER power generations have been estimated, the information will support topology and state estimation (SE). The topology estimation module demonstrated the viability of mixed integer linear programming (MILP) formulation to estimate the most likely operational radial topology and outage sections using power flow measurements, historical/estimated load and DERs data and smart meter ping measurements. Formulation includes continuous (power flow, load and DERs data) and binary measurements (smart meter ping measurements) in a single formulation. Errors in continuous data and binary data are modeled as normal distribution and Bernoulli distribution, respectively. In the future distribution grid, the power injection from controllable DERs will be essential for efficient and resilient grid operation. However, determining the optimal DER injections and restoration actions is dependent on knowledge of the system states. State estimation (SE), already the cornerstone of transmission energy management systems, will become commonplace in distribution management systems as more measurements become available from deployment of automated metering infrastructure (AMI). Observability analysis is the first step in SE, as it determines the sufficiency of the available measurements for accurately estimating the current system states. A new type of pseudo-measurement called a Correlational Measurement (CM) is introduced in this module, to enhance the observability of the system to enable more accurate SE. CMs encapsulate knowledge of correlation between demand patterns for similar classes of loads as well as injection patterns for same-technology renewable DERs. During grid contingency scenarios, DERs have been traditionally disconnected, without any fault ride-through capabilities. However, with new regulations and better technology, it is feasible for these resources to contribute to the grid’s restoration after an adverse event and hence enhance resilience. The controllability module proposes a two-step restoration scheme for the power system restoration process by leveraging additional degrees of freedom in power electronics interfaced DERs for mitigating voltage problems. In a resilience mode without the utility system, the distribution grid relies on DERs to serve critical load. In such a severe event with multiple faults on the distribution feeders, actuation of various protective devices (PDs) divides the distribution system into electrical islands. The undetected actuated PDs due to fault current contributions from DERs can delay the restoration process, thereby reducing the system resilience. The Advanced Outage Management (AOM) and the Advanced Feeder Restoration (AFR) modules developed in this project provide improved system resilience with multiple DERs. AOM identifies the faulted sections and actuated PDs in a distribution system with DERs by incorporating smart meter data. The most credible outage scenario including fault locations, PD actuations, and fault indicator (FI) failures is identified by a set of binary integer linear programming incorporating hypotheses. The AFR module serves to restore a distribution system with available energy resources taking into consideration the availability of utility sources and DERs. By partitioning the system into islands, critical load will be served with the available generation resources within islands based on the solution of a MILP. When the utility systems become available, the optimal path will be determined by a spanning tree search algorithm that reconnects these islands back to substations and restores the remaining load. The transmission and distribution (T&D) co-simulation module was used to validate the effect of a control action performed on the distribution side assets as it propagates to the transmission side. This ensures that the control action performed results in a feasible operating point on both the transmission and the distribution system. In addition to validation, the team used the T&D co-simulation module to demonstrate how distribution system assets can be used to mitigate issues on the transmission system. Specifically, the team demonstrated that appropriate switching operations on the distribution side can alleviate the line overload condition on the transmission side without causing new operational constraint violations.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Final Technical Report -- Bridging the PSI Knowledge Gap: A Multiscale Approach

The Plasma Surface Interactions (PSI) Science Center formed by the grant undertook a multidisciplinary set of studies on the complex interface between the plasma and solid states of matter. The strategy of the center was to combine and integrate the experimental, diagnostic and modeling toolkits from multiple institutions towards specific PSI problems. In this way the Center could tackle integrated science issues which were not addressable by single institutions, as well as evolve the underlying science of the PSI in a more general way than just for fusion applications. The overall strategy proved very successful. The research result and highlights of the MIT portion of the Center are primarily described. A particular highlight is the study of tungsten nano-tendril growth in the presence of helium plasmas. The Center research provided valuable new insights to the mechanisms controlling the nano-tendrils by developing coupled modeling and in situ diagnostic methods which could be directly compared. For example, the role of helium accumulation in tungsten distortion in the surface was followed with unique in situ helium concentration diagnostics developed. These depth-profiled, time-resolved helium concentration measurements continue to challenge the numerical models of nano-tendrils. The Center team also combined its expertise on tungsten nano-tendrils to demonstrate for the first time the growth of the tendrils in a fusion environment on the Alcator C-Mod fusion experiment, thus having significant impact on the broader fusion research effort. A new form of isolated nano-tendril “columns” were identified which are now being used to understand the underlying mechanisms controlling the tendril growth. The Center also advanced PSI science on a broader front with a particular emphasis on developing a wide range of in situ PSI diagnostic tools at the DIONISOS facility at MIT. For example the strong suppression of sputtering by the certain combination of light-species plasmas and metals was experimentally studied with independent measurement methods across the Center. This surprising result challenges the universal use of the binary-collision approximation in sputtering predictions and continues to be the subject of study. In order to address this issue MIT developed a new in situ erosion measurement technique based on ion beam analysis which can be used at elevated material temperatures. This exciting new technique is now being used to study material erosion in high performance plasma thrusters for space exploration and is being adopted to fusion experimental devices. This is an indicator of the positive synergies that arise from such a Center, with the research having impact beyond the initial area of study. The Center also served successfully as an organizing force for communication to the science community. The MIT members of the Center provided many high-profile overview presentations at prestigious international conferences and national workshops. The research resulted in three student theses and 24 peer-reviewed publications. PSI research continues to be identified as a critical area for fusion energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A new-speckle interferometry system for the MAMA detector

We have developed a new system for making speckle observations with the multianode microchannel array (MAMA) detector. This system is a true photon-counting imaging device which records the arrival time of every detected photon and allows for reconstruction of image features near the diffraction limit of the telescope. We present a description of the system and summary of observational results obtained at the Lick Observatory 1-m reflector in 1991 September. The diffraction limit of the 1-m telescope at 5029 A is about 0.125 arcsec and we have successfully resolved the catalogued interferometric binary HD 202582 with a separation of 0.157 +/- 0.031 arcsec. A pair of stars in the open cluster Chi Persei separated by 2.65 +/- 0.22 arcsec with approximate V magnitudes 8.6 and 11.5 has also been successfully analyzed with the speckle technique.

Horch, E.↗

Photometric study and period analysis of the contact binary XZ Leonis

We present multi-color CCD photometry of the neglected contact binary XZ Leo. Completely covered VRI band light curves and four times of minimum light were obtained. Combining the photometric and previously published radial-velocity data, a revised photometric analysis was carried out for the binary system by applying the Wilson–Devinney code. With a hot spot placed on the massive primary component near the neck region of the common envelope, the light curves were satisfactorily modeled. The photometric solution combined with the radial-velocity solution reveals that XZ Leo is an A-type contact binary with a degree of contact of 24(±1)%. The absolute parameters of the components were determined to be M{sub 1} = 1.74(±0.06)M{sub ⊙}, M{sub 2} = 0.61(±0.02)M{sub ⊙}, R{sub 1} = 1.69(±0.01)R{sub ⊙}, R{sub 2} = 1.07(±0.01)R{sub ⊙}, L{sub 1} = 6.73(±0.08) L{sub ⊙}, and L{sub 2} = 2.40(±0.04)L{sub ⊙}. Based on all the available data, the long-term orbital period behavior of the system was investigated. It indicates that the binary system was undergoing a continuous orbital period increase in the past three decades with a rate of dP/dt =+6.12×10{sup −8} days yr{sup −1}, which suggests a probable mass transfer from the secondary to the primary component at a rate of dM/dt=3.92×10{sup −8}M{sub ⊙} yr{sup −1}. The binary system is expected to evolve into the broken-contact stage in 1.56×10{sup 6} years. This could be evidence supporting the thermal relaxation oscillation theory.

79 ASTRONOMY AND ASTROPHYSICS↗

THE PERIOD VARIATION OF AND A SPOT MODEL FOR THE ECLIPSING BINARY AR BOOTIS

New CCD photometric observations of the eclipsing system AR Boo were obtained from 2006 February to 2008 April. The star's photometric properties are derived from detailed studies of the period variability and of all available light curves. We find that over about 56 yr the orbital period of the system has varied due to a combination of an upward parabola and a sinusoid rather than in a monotonic fashion. Mass transfer from the less massive primary to the more massive secondary component is likely responsible for at least a significant part of the secular period change. The cyclical variation with a period of 7.57 yr and a semi-amplitude of 0.0015 d can be produced either by a light-travel-time effect due to an unseen companion with a scaled mass of M {sub 3}sin i {sub 3} = 0.081 M {sub sun} or by a magnetic period modulation in the secondary star. Historical light curves of AR Boo, as well as our own, display season-to-season light variability, which are best modeled by including both a cool spot and a hot one on the secondary star. We think that the spots express magnetic dynamo-related activity and offer limited support for preferring the magnetic interpretation of the 7.57 yr cycle over the third-body interpretation. Our solutions confirm that AR Boo belongs to the W-subtype contact binary class, consisting of a hotter, less massive primary star with a spectral type of G9 and a companion of spectral type K1.

79 ASTRONOMY AND ASTROPHYSICS↗

Electronegativity estimation of electronic polarizabilities of semiconductors

On the basis of the viewpoint of structure-property relationship in solid state matters, we proposed some useful relations to quantitatively calculate the electronic polarizabilities of binary and ternary chalcopyrite semiconductors, by using electronegativity and principal quantum number. The calculated electronic polarizabilities are in good agreement with reported values in the literature. Both electronegativity and principal quantum number can effectively reflect the detailed chemical bonding behaviors of constituent atoms in these semiconductors, which determines the magnitude of their electronic polarizabilities. The present work provides a useful guide to compositionally design novel semiconductor materials, and further explore advanced electro-optic devices.

36 MATERIALS SCIENCE↗

Reversible tuning of the surface state in a pseudobinary Bi2(Te-Se)3 topological insulator

We use angle-resolved photoemission spectroscopy to study a nontrivial surface state in a pseudobinary Bi2Te2.8Se0.2 topological insulator. We show that, unlike previously studied binaries, this is an intrinsic topological insulator with the conduction bulk band residing well above the chemical potential. Our data indicate that under a good vacuum condition there are no significant aging effects for more than two weeks after cleaving. We also demonstrate that the shift of the Kramers point at low temperature is caused by UV-assisted absorption of molecular hydrogen. Our findings pave the way for applications of these materials in devices and present an easy scheme to tune their properties.

36 MATERIALS SCIENCE↗

QSPIN: A High Level Java API for Quantum Computing Experimentation

QSPIN is a high level Java language API for experimentation in QC models used in the calculation of Ising spin glass ground states and related quadratic unconstrained binary optimization (QUBO) problems. The Java API is intended to facilitate research in advanced QC algorithms such as hybrid quantum-classical solvers, automatic selection of constraint and optimization parameters, and techniques for the correction and mitigation of model and solution errors. QSPIN includes high level solver objects tailored to the D-Wave quantum annealing architecture that implement hybrid quantum-classical algorithms [Booth et al.] for solving large problems on small quantum devices, elimination of variables via roof duality, and classical computing optimization methods such as GPU accelerated simulated annealing and tabu search for comparison. A test suite of documented NP-complete applications ranging from graph coloring, covering, and partitioning to integer programming and scheduling are provided to demonstrate current capabilities.

Quantu↗