SEARCH · Search NASA

Results for “collocation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

All sources NASA NTRS DOE OSTI

NASA NTRS1978

Mean gravity anomalies and sea surface heights derived from GEOS-3 altimeter data

Approximately 2000 GEOS-3 altimeter arcs were analyzed to improve knowledge of the geoid and gravity field. An adjustment procedure was used to fit the sea surface heights (geoid undulations) in an adjustment process that incorporated cross-over constraints. The error model used for the fit was a one or two parameter model which was designed to remove altimeter bias and orbit error. The undulations on the adjusted arcs were used to produce geoid maps in 20 regions. The adjusted data was used to derive 301 5 degree equal area anomalies and 9995 1 x 1 degree anomalies in areas where the altimeter data was most dense, using least squares collocation techniques. Also emphasized was the ability of the altimeter data to imply rapid anomaly changes of up to 240 mgals in adjacent 1 x 1 degree blocks.

Rapp, R. H.↗

NASA NTRS1977

GEOS-2 refraction program summary document

Data from an extensive array of collocated instrumentation at the Wallops Island test facility were intercompared in order to (1) determine the practical achievable accuracy limitations of various tropospheric and ionospheric correction techniques; (2) examine the theoretical bases and derivation of improved refraction correction techniques; and (3) estimate internal systematic and random error levels of the various tracking stations. The GEOS 2 satellite was used as the target vehicle. Data were obtained regarding the ionospheric and tropospheric propagation errors, the theoretical and data analysis of which was documented in some 30 separate reports over the last 6 years. An overview of project results is presented.

Mallinckrodt, A. J.↗

NASA NTRS1978

Mode I analysis of a cracked circular disk subject to a couple and a force

Mode I stress intensity coefficients were obtained for an edge-cracked disk (round compact specimen). Results for this plane elastostatic problem, obtained by a boundary collocation analysis are presented for A/D ratios of 0.35 to 1, where A is the crack length and D is the disk diameter. The results presented are for two complementary types of loading. By superposition of these results the stress intensity factor for any practical load line location of a pin-loaded round compact specimen can be obtained.

Gross, B.↗

NASA NTRS1976

Polynominal Interpolation Methods for Viscous Flow Calculations

Higher-order collocation procedures resulting in tridiagonal matrix systems are derived from polynomial spline interpolation and by Hermitian (Taylor series) finite-difference discretization. The similarities and special features of these different developments are discussed. The governing systems apply for both uniform and variable meshes. Hybrid schemes resulting from two different polynomial approximations for the first and second derivatives lead to a nonuniform mesh extension of the so-called compact or Pad? difference technique (Hermite 4). A variety of fourth-order methods are described and the Hermitian approach is extended to sixth-order (Hermite 6). The appropriate spline boundary conditions are derived for all procedures. For central finite differences, this leads to a two-point, second-order accurate generalization of the commonly used three-point end-difference formula. Solutions with several spline and Hermite procedures are presented for the boundary layer equations, with and without mass transfer, and for the incompressible viscous flow in a driven cavity. Divergence and nondivergence equations are considered for the cavity. Among the fourth-order techniques, it is shown that spline 4 has the smallest truncation error. The spline 4 procedure generally requires one-quarter the number of mesh points in a given coordinate direction as a central finite-difference calculation of equal accuracy. The Hermite 6 procedure leads to remarkably accurate boundary layer solutions.

Rubin, S. G.↗

NASA NTRS1979

Needed weather information where it belongs; in the cockpit

The availability of inflight weather data to the cockpit is discussed. The need for real-time information systems to warn of hazardous weather conditions is emphasized. It is suggested that the Weather Service severe weather radar network be collocated with the FAA radar to provide information for real-time decision making.

Gatlin, H. G.↗

NASA NTRS1979

Stress-intensity factors and crack-opening displacements for round compact specimens

A two dimensional, boundary collocation stress analysis was used to analyze various round compact specimens. The influence of the round external boundary and of pin-loaded holes on stress intensity factors and crack opening displacements was determined as a function of crack-length-to-specimen-width ratios. A wide-range equation for the stress intensity factors was developed. Equations for crack-surface displacements and load-point displacements were also developed. In addition, stress intensity factors were calculated from compliance methods to demonstrate that load-displacement records must be made at the loading points and not along the crack line for crack-length-to-specimen-width ratios less than about 0.4.

Newman, J. C., Jr.↗

NASA NTRS1980

Geothermal direct heat use: Market potential/penetration analysis for Federal Region 9

A preliminary study was made of the potential for geothermal direct heat use in Arizona, California, Hawaii, and Nevada (Federal Region 9). An analysis was made of each state to: (1) define the resource, based on the latest available data; (2) assess the potential market growth for geothermal energy; and (3) estimate the market penetration, projected to 2020. Findings of the study include the following: (1) Potentially economical hydrothermal resources exist in all four states of the Region: however, the resource data base is largely incomplete, particularly for low to moderate temperature resources. (2) In terms of beneficial heat, the total hydrothermal resource identified so far for the four states is on the order of 43 Quads, including an estimated 34 Quads of high temperature resources which are suitable for direct as well as electrical applications. (3) In California, Hawaii, and Nevada, the industrial market sector has somewhat greater potential for penetration than the residential/commercial sector. In Arizona, however, the situation is reversed, due to the collocation of two major metropolitan areas (Phoenix and Tucson) with potential geothermal resources.

Powell, W.↗

NASA NTRS1980

Stability of nonuniform rotor blades in hover using a mixed formulation

A mixed formulation for calculating static equilibrium and stability eigenvalues of nonuniform rotor blades in hover is presented. The static equilibrium equations are nonlinear and are solved by an accurate and efficient collocation method. The linearized perturbation equations are solved by a one step, second order integration scheme. The numerical results correlate very well with published results from a nearly identical stability analysis based on a displacement formulation. Slight differences in the results are traced to terms in the equations that relate moments to derivatives of rotations. With the present ordering scheme, in which terms of the order of squares of rotations are neglected with respect to unity, it is not possible to achieve completely equivalent models based on mixed and displacement formulations. The one step methods reveal that a second order Taylor expansion is necessary to achieve good convergence for nonuniform rotating blades. Numerical results for a hypothetical nonuniform blade, including the nonlinear static equilibrium solution, were obtained with no more effort or computer time than that required for a uniform blade.

Stephens, W. B.↗

NASA NTRS1979

Detailed gravity anomalies from Geos 3 satellite altimetry data

Detailed gravity anomalies are computed from a combination of Geos 3 satellite altimeter and terrestrial gravity data using least-squares principles. The mathematical model used is based on the Stokes' equation modified for a nonglobal solution. Using Geos 3 data in the calibration area, the effects of several anomaly parameter configurations and data densities/distributions on the anomalies and their accuracy estimates are studied. The accuracy estimates for 1 deg x 1 deg mean anomalies from low density altimetry data are of the order of 4 mgal. Comparison of these anomalies with the terrestrial data and also with Rapp's data derived using collocation techniques show rms differences of 7.2 and 4.9 mgal, respectively. Indications are that the anomaly accuracies can be improved to about 2 mgal with high density data. Estimation of 30 in. x 30 in. mean anomalies indicates accuracies of the order of 5 mgal. Proper verification of these results will be possible only when accurate ground truth data become available.

Gopalapillai, G. S.↗

NASA NTRS1980

Reformulation of Possio's kernel with application to unsteady wind tunnel interference

An efficient method for computing the Possio kernel has remained elusive up to the present time. In this paper the Possio is reformulated so that it can be computed accurately using existing high precision numerical quadrature techniques. Convergence to the correct values is demonstrated and optimization of the integration procedures is discussed. Since more general kernels such as those associated with unsteady flows in ventilated wind tunnels are analytic perturbations of the Possio free air kernel, a more accurate evaluation of their collocation matrices results with an exponential improvement in convergence. An application to predicting frequency response of an airfoil-trailing edge control system in a wind tunnel compared with that in free air is given showing strong interference effects.

Fromme, J. A.↗

NASA NTRS1980

Energy from wood waste - A case study

A joint study has been conducted by NASA and Army installations collocated in a dense forest in southwestern Mississippi in order to determine the technical and economic feasibility of using wood waste as a renewable energy source. The study has shown that, with proper forest management, the timber on government lands could eventually support the total energy requirements of 832 billion Btu/yr. Analysis of the current conversion technologies indicates that the direct combustion spreader stoker approach is the best demonstrated technology for this specific application. The economics of the individual powerplants reveal them as attractive alternatives to fossil fueled plants. Environmental aspects are also discussed.

Scola, R.↗

NASA NTRS1982

Unsteady Subsonic Loadings Due to Control-Surface Motion

RHOIV computer program predicts unsteady lifting-surface loadings caused by motions of leading edge and trailing-edge control surfaces having sealed gaps at hinge lines and side edges. Analysis is based on linear, subsonic, potential-flow theory using kernel function method. Linear combinations of pressure distributions are used that are continuous except at planform edges and hinge lines. Loading solution is obtained by downwash collocation for deflection or motion of main wing and control surfaces.

Rowe, W. S.↗

NASA NTRS1980

Experimental compliance calibration of the compact fracture toughness specimen

Compliances and stress intensity coefficients were determined over crack length to width ratios from 0.1 to 0.8. Displacements were measured at the load points, load line, and crack mouth. Special fixturing was devised to permit accurate measurement of load point displacement. The results are in agreement with the currently used results of boundary collocation analyses. The errors which occur in stress intensity coefficients or specimen energy input determinations made from load line displacement measurements rather than from load point measurements are emphasized.

Fisher, D. M.↗

NASA NTRS1981

The stability of pseudospectral-Chebyshev methods

The pseudospectral-Chebyshev methods are shown to be convergent in variable coefficient problems and, in some cases, hyperbolic problems. The analysis demonstrates that the rate of convergence is greater for finite difference methods or the finite element method. For a single first-order hyperbolic equation, the method is seen as remaining stable even when the coefficient changes sign, although in this case it is specified that care must be taken to have adequate spatial resolution. It is noted that this fact, combined with the fact that collocation methods are easy to apply in the nonlinear case, shows that the pseudospectral method is in general preferable to the Galerkin or Tau methods.

Gottlieb, D.↗

NASA NTRS1981

A class of stable, robust feedback controllers for large space structures

A two-level control system design is considered for large space structures, which consists of a primary and a secondary controller. The secondary or damping enhancement controller is shown to be stable and robust, even when time-invariant nonlinearities are present in the actuators and/or sensors. The use of Annular Momentum Control Devices (AMCD's) is also considered for secondary control. The primary attitude controller using collocated torque actuators and attitude and rate sensors is stable and robust. The effect of actuator/sensor dynamics on the stability of the primary and secondary controllers is considered. The AMCD's used for secondary control actuation can also be used for the primary controller.

Joshi, S. M.↗

NASA NTRS1981

The state of the atmosphere as inferred from the FGGE satellite observing systems during SOP-1

The statistical properties, and coverage, of satellite temperature sounding data are described. Tropical regions are observed every two days, extratropics from one to four times a day. Oceans are covered two to three times a day. Asynoptic coverage is comparable to the U.S. rawinsonde network twice daily coverage. Lack of ground truth for data sparse areas makes accuracy difficult to assess. The rms differences of layer mean temperatures obtained from collocating rawinsonde observations with satellite temperature profiles in space and time differ from rms differences of layer mean satellite temperature soundings. The FGGE satellite systems can infer the three dimensional motion field and improve the representation of the large scale state of the atmosphere.

Halem, M.↗

NASA NTRS1981

Edge delamination in angle-ply composite laminates, part 5

A theoretical method was developed for describing the edge delamination stress intensity characteristics in angle-ply composite laminates. The method is based on the theory of anisotropic elasticity. The edge delamination problem is formulated using Lekhnitskii's complex-variable stress potentials and an especially developed eigenfunction expansion method. The method predicts exact orders of the three-dimensional stress singularity in a delamination crack tip region. With the aid of boundary collocation, the method predicts the complete stress and displacement fields in a finite-dimensional, delaminated composite. Fracture mechanics parameters such as the mixed-mode stress intensity factors and associated energy release rates for edge delamination can be calculated explicity. Solutions are obtained for edge delaminated (theta/-theta theta/-theta) angle-ply composites under uniform axial extension. Effects of delamination lengths, fiber orientations, lamination and geometric variables are studied.

Wang, S. S.↗

NASA NTRS1979

Reduction of computer usage costs in predicting unsteady aerodynamic loadings caused by control surface motions: Computer program description

A digital computer program was developed to calculate unsteady loadings caused by motions of lifting surfaces with leading edge and trailing edge controls based on the subsonic kernel function approach. The pressure singularities at hinge line and side edges were extracted analytically as a preliminary step to solving the integral equation of collocation. The program calculates generalized aerodynamic forces for user supplied deflection modes. Optional intermediate output includes pressure at an array of points, and sectional generalized forces. From one to six controls on the half span can be accomodated.

Petrarca, J. R.↗