Search NASA⌕ Search

SEARCH · Search NASA

Results for “communication interface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

The management of energy utilization in a spacecraft tracking station and its industrial applications

The mission of a tracking station within the NASA/Jet Propulsion Deep Space Network is characterized by a wide diversity of spacecraft types, communications ranges, and data accuracy requirements. In the present paper, the system architecture, communications techniques, and operators interfaces for a utility controller are described. The control equipment as designed and installed is meant to be a tool to study applications of automated control in the dynamic environment of a tracking station. It allows continuous experimenting with new technology without disruption of the tracking activities.

Reynolds, R.↗

A transportable executive system for use with remote sensing applications software

This report describes a transportable software executive system under development. This executive will facilitate user access to data and programs used in remote sensing applications and will provide the necessary system control, bookkeeping, operating system interface, man-machine communications and other services needed to make the computer an effective and economical tool for the remote sensing investigator.

Van Wie, P.↗

Unified Robot-Control System

Robot-joint motors integrated with control computer or computers. Robot controller uses only 1 microprocessor to control as many as 16 joint-actuating motors. Control system uses high-speed bus to communicate with joint-interface circuits, addressing scheme to write commands to several motors simultaneously, and efficient assembly-language servo code. Features enable control of 16 joints at 1-kHz servo rate. Suitable for control of motors in numerically-controlled manufacturing systems. Use of single joint-control processor results in few components, lower cost, and simpler architecture.

Szakaly, Zoltan F.↗

Systems utilization enhancement data system overview

An overview of the Systems Utilization Enhancement (SUE) data system is presented. The subsystems are described, including the telemetry processor, communications processor, digital maintenance and control subsystem, link console subsystem, digital recording subsystem, communications processor SUE system interface unit, data quality monitoring subsystem, analog parameter and event recorder, status SUE system interface unit, and portable maintenance subsystem. Hardware design considerations are discussed, including architecture, coupling, commonality, modularity. reliability, fault-tolerance, and growth.

Schmid, J. Andre↗

The Information Science Experiment System - The computer for science experiments in space

The concept of the Information Science Experiment System (ISES), potential experiments, and system requirements are reviewed. The ISES is conceived as a computer resource in space whose aim is to assist computer, earth, and space science experiments, to develop and demonstrate new information processing concepts, and to provide an experiment base for developing new information technology for use in space systems. The discussion covers system hardware and architecture, operating system software, the user interface, and the ground communication link.

Foudriat, Edwin C.↗

Toward a formal verification of a floating-point coprocessor and its composition with a central processing unit

Discussed here is work to formally specify and verify a floating point coprocessor based on the MC68881. The HOL verification system developed at Cambridge University was used. The coprocessor consists of two independent units: the bus interface unit used to communicate with the cpu and the arithmetic processing unit used to perform the actual calculation. Reasoning about the interaction and synchronization among processes using higher order logic is demonstrated.

Pan, Jing↗

Aeronautical satellite antenna steering using magnetic field sensors

Designers of aeronautical satellite terminals are often faced with the problem of steering a directive antenna from an airplane or helicopter. This problem is usually solved by using aircraft orientation information derived from inertial sensors on-board the aircraft in combination with satellite ephemeris information calculated from geographic coordinates. This procedure works well but relies heavily on avionics that are external to the terminal. For the majority of small aircraft and helicopters which will form the bulk of future aeronautical satcom users, such avionics either do not exist or are difficult for the satellite terminal to interface with. At the Communications Research Center (CRC), work has been undertaken to develop techniques that use the geomagnetic field and satellite antenna pointing vectors (both of which are stationary in a local geographical area) to track the position of a satellite relative to a moving platform such as an aircraft. The performance of this technique is examined and a mathematical steering transformation is developed within this paper. Details are given regarding the experimental program that will be undertaken to test the concepts proposed herein.

Sydor, John↗

Effect of Marangoni Convection Generated by Voids on Segregation During Low-G and 1-G Solidification

Solidification experiments, especially microgravity solidification experiments are often hampered by the evolution of unwanted voids or bubbles in the melt. Although these voids and/or bubbles are highly undesirable, there are currently no effective means of preventing their formation or eliminating their adverse effects, particularly, during low-g experiments. Marangoni Convection caused by these voids can drastically change the transport processes in the melt and, therefore, introduce enormous difficulties in interpreting the results of the space investigations. Recent microgravity experiments by Matthiesen, Andrews, and Fripp are all good examples of how the presence of voids and bubbles affect the outcome of costly space experiments and significantly increase the level of difficulty in interpreting their results. In this work we examine mixing caused by Marangoni convection generated by voids and bubbles in the melt during both 1-g and low-g solidification experiments. The objective of the research is to perform a detailed and comprehensive combined numerical-experimental study of Marangoni convection caused by voids during the solidification process and to show how it can affect segregation and growth conditions by modifying the flow, temperature, and species concentration fields in the melt. While Marangoni convection generated by bubbles and voids in the melt can lead to rapid mixing that would negate the benefits of microgravity processing, it could be exploited in some terrestrial processing to ensure effective communication between a melt/solid interface and a gas phase stoichiometry control zone. Thus we hope that this study will not only aid us in interpreting the results of microgravity solidification experiments hampered by voids and bubbles but to guide us in devising possible means of minimizing the adverse effects of Marangoni convection in future space experiments or of exploiting its beneficial mixing features in ground-based solidification.

Kassemi, M.↗

Compact, Low-Overhead, MIL-STD-1553B Controller

A compact and flexible controller has been developed to provide MIL-STD- 1553B Remote Terminal (RT) communications and supporting and related functions with minimal demand on the resources of the system in which the controller is to be installed. (MIL-STD-1553B is a military standard that encompasses a method of communication and electrical-interface requirements for digital electronic subsystems connected to a data bus. MIL-STD-1553B is commonly used in defense and space applications.) Many other MIL-STD-1553B RT controllers are complicated, and to enable them to function, it is necessary to provide software and to use such ancillary separate hardware devices as microprocessors and dual-port memories. The present controller functions without need for software and any ancillary hardware. In addition, it contains a flexible system interface and extensive support hardware while including on-chip error-checking and diagnostic support circuitry. This controller is implemented within part of a modern field-programmable gate array.

Katz, Richard↗

Fuel Cell/Electrochemical Cell Voltage Monitor

A concept has been developed for a new fuel cell individual-cell-voltage monitor that can be directly connected to a multi-cell fuel cell stack for direct substack power provisioning. It can also provide voltage isolation for applications in high-voltage fuel cell stacks. The technology consists of basic modules, each with an 8- to 16-cell input electrical measurement connection port. For each basic module, a power input connection would be provided for direct connection to a sub-stack of fuel cells in series within the larger stack. This power connection would allow for module power to be available in the range of 9-15 volts DC. The relatively low voltage differences that the module would encounter from the input electrical measurement connection port, coupled with the fact that the module's operating power is supplied by the same substack voltage input (and so will be at similar voltage), provides for elimination of high-commonmode voltage issues within each module. Within each module, there would be options for analog-to-digital conversion and data transfer schemes. Each module would also include a data-output/communication port. Each of these ports would be required to be either non-electrical (e.g., optically isolated) or electrically isolated. This is necessary to account for the fact that the plurality of modules attached to the stack will normally be at a range of voltages approaching the full range of the fuel cell stack operating voltages. A communications/ data bus could interface with the several basic modules. Options have been identified for command inputs from the spacecraft vehicle controller, and for output-status/data feeds to the vehicle.

Vasquez, Arturo↗

Deployable Fresnel Rings

Deployable Fresnel rings (DFRs) significantly enhance the realizable gain of an antenna. This innovation is intended to be used in combination with another antenna element, as the DFR itself acts as a focusing or microwave lens element for a primary antenna. This method is completely passive, and is also completely wireless in that it requires neither a cable, nor a connector from the antenna port of the primary antenna to the DFR. The technology improves upon the previous NASA technology called a Tri-Sector Deployable Array Antenna in at least three critical aspects. In contrast to the previous technology, this innovation requires no connector, cable, or other physical interface to the primary communication radio or sensor device. The achievable improvement in terms of antenna gain is significantly higher than has been achieved with the previous technology. Also, where previous embodiments of the Tri-Sector antenna have been constructed with combinations of conventional (e.g., printed circuit board) and conductive fabric materials, this innovation is realized using only conductive and non-conductive fabric (i.e., "e-textile") materials, with the possible exception of a spring-like deployment ring. Conceptually, a DFR operates by canceling the out-of-phase radiation at a plane by insertion of a conducting ring or rings of a specific size and distance from the source antenna, defined by Fresnel zones. Design of DFRs follow similar procedures to those outlined for conventional Fresnel zone rings. Gain enhancement using a single ring is verified experimentally and through computational simulation. The experimental test setup involves a microstrip patch antenna that is directly behind a single-ring DFR and is radiating towards a second microstrip patch antenna. The first patch antenna and DFR are shown. At 2.42 GHz, the DFR improves the transmit antenna gain by 8.6 dB, as shown in Figure 2, relative to the wireless link without the DFR. A figure illustrates the relative strength of power coupling between the first and second microstrip antennas with and without the DFR. Typically, a DFR is designed for use at a particular frequency; however, testing of a DFR indicated a relatively wide operational bandwidth of approximately 8.2%. Wider bandwidth operation and multi-band operation are anticipated by extending the known art of conventional Fresnel rings to the DFRs. Increasing the number of rings used to construct a DFR antenna increases the gain, with the upper bound limited often by the largest practical dimensions that can be tolerated for a given application. The maximum theoretical improvement in gain for a single ring is 9.5 dB. Experimental results are within 0.9 dB of this theoretical value. Adding rings increases gain, and theoretically, improvements of 10 to 13 dB above that of the primary antenna gain can be achieved with two- and three-ring versions.

Kennedy, Timothy F.↗

Astrobee Guest Science

At the end of 2017, Astrobee will launch three free-flying robots that will navigate the entire US segment of the ISS (International Space Station) and serve as a payload facility. These robots will provide guest science payloads with processor resources, space within the robot for physical attachment, power, communication, propulsion, and human interfaces.

robot↗

Tactile Display for EVA

As human spaceflight crews engage in more complex missions beyond low Earth orbit, their need for autonomy increases. ISS-like operations in which Earth-based mission control monitors life-critical systems and provides real time support for crew tasks will be limited by communication bandwidth and delays, forcing the crew to take on a subset of these responsibilities. This presents the biggest challenge during Extravehicular Activity (EVA)s, where the crew is already overloaded and their ability to interact with information systems is severely limited. Tactile displays, which present information using the sense of touch, expand the users' communication bandwidth. This untapped interface modality can be used for a wide range of interactions during EVA, including emergency alerts, non-emergency situational awareness, and simple instruction.

Aceves, Ricco↗

Biosensor Integration Development ExMC/Canadian Space Agency Collaboration

In support of the NASA Human Research Program Exploration Medical Capability (ExMC) Element, NASA Ames Research Center (ARC) established a collaborative effort with the Canadian Space Agency (CSA). The collaboration focuses on leveraging CSA capability in the areas of biosensors and decision support that will augment future development of such components for Exploration Missions. The CSA advancement of biosensors enables NASA to focus on the integration and data management associated with these types of components through the system currently under development by the Medical Data Architecture (MDA) project. This approach has enabled the establishment of a successful collaborative working relationship between ExMC and CSA.Applying lessons learned from the fiscal year 2016 (FY16) Human Exploration Research Analog (HERA) campaign, CSA and NASA ARC developed a solution to provide real-time feedback to researchers who monitor the collection of vital signs data from a wearable Astroskin garment. The advances in the interfaces included the development of an iPad application (by CSA) to wirelessly forward the vital signs data to the MDA system, which collected the vital signs data through a receiver developed by NASA ARC. The development of these interfaces aims to provide communications between the Astroskin and the MDA system such that data may be seamlessly collected, stored and retrieved by the MDA. The first steps towards this goal were demonstrated in FY16. In FY17, ExMC will complete the first in a series of test beds that establishes a system to automate collection and management of vital sign data from the Astroskin, and other sources of data, to provide information for a crewmember to make medical decisions. In addition, the MDA Test Bed 1 will enable CSA to evaluate and optimize biosensor advancement and facilitate decision support algorithm development.

Vital signs↗

Biosensor Integration Development ExMC/Canadian Space Agency Collaboration

In support of the NASA Human Research Program Exploration Medical Capability (ExMC) Element, NASA Ames Research Center (ARC) established a collaborative effort with the Canadian Space Agency (CSA). The collaboration focuses on leveraging CSA capability in the areas of biosensors and decision support that will augment future development of such components for Exploration Missions. The CSA advancement of biosensors enables NASA to focus on the integration and data management associated with these types of components through the system currently under development by the Medical Data Architecture (MDA) project. This approach has enabled the establishment of a successful collaborative working relationship between ExMC and CSA.Applying lessons learned from the fiscal year 2016 (FY16) Human Exploration Research Analog (HERA) campaign, CSA and NASA ARC developed a solution to provide real-time feedback to researchers who monitor the collection of vital signs data from a wearable Astroskin garment. The advances in the interfaces included the development of an iPad application (by CSA) to wirelessly forward the vital signs data to the MDA system, which collected the vital signs data through a receiver developed by NASA ARC. The development of these interfaces aims to provide communications between the Astroskin and the MDA system such that data may be seamlessly collected, stored and retrieved by the MDA. The first steps towards this goal were demonstrated in FY16. In FY17, ExMC will complete the first in a series of test beds that establishes a system to automate collection and management of vital sign data from the Astroskin, and other sources of data, to provide information for a crewmember to make medical decisions. In addition, the MDA Test Bed 1 will enable CSA to evaluate and optimize biosensor advancement and facilitate decision support algorithm development.

Astroskin↗

Prenatal 2g Exposure Alters Placental Expression of Stress-Related Genes

Extra-terrestrial colonization is of growing interest to space agencies and private entities, emphasizing the importance of research on reproduction and development in the absence of Earth's 1G. Maternal stressors can modify offspring development, exerting significant lifespan and crossgenerational changes through prenatal programming. The space environment is stressful, therefore exposure to altered gravity during pregnancy may impact later life outcomes in offspring. In ground-based studies, we exposed pregnant rats to continuous +G (above Earth gravity), and observed overweight and elevated anxiety in adult male (but not female) offspring, common phenotypes associated with prenatal maternal stress. Here we hypothesize that exposure to increased gravity during pregnancy elicits changes in the expression of stress-related genes in placenta that may mediate emergence of later life outcomes. While the placenta transports maternal factors to the fetus and produces endogenous fetal hormones, stress-induced changes at the placental-uterine interface may also alter communication between mother and fetus, facilitating prenatal transmission of unfavorable later life outcomes and cross-generational epigenetic alterations. Maternal stress elevates maternal glucocorticoids however placental 11b-hydroxysteroid dehydrogenase type 2 (HSD11B2) buffers fetal exposure by converting cortisol/corticosterone into inactive metabolites. Maternal stress during pregnancy down-regulates this enzyme and can induce epigenetic changes in placental and fetal tissues accounting for heightened adult HPA reactivity. Past studies have shown a placenta-specific increase in DNA methyltransferase (DNMT3a) mRNA in stressed mothers, an effect with implications for genome-wide epigenetic changes that may account for diverse phenotypic outcomes following maternal stress. Here we exposed groups of pregnant rats to one of five gravity loads (1, 1.5, 1.75 and 2G) and analyzed placental samples during late gestation. We predicted a systematic dose-response relationship between gravity load and the expression of the HSD11B2 and DNMT3 genes, thereby linking maternal exposure to altered gravity during pregancy with maternal stress.

Kalotia, Simranjit K.↗

Reproducibility in a multiprocessor system

Fixing a problem is usually greatly aided if the problem is reproducible. To ensure reproducibility of a multiprocessor system, the following aspects are proposed; a deterministic system start state, a single system clock, phase alignment of clocks in the system, system-wide synchronization events, reproducible execution of system components, deterministic chip interfaces, zero-impact communication with the system, precise stop of the system and a scan of the system state.

97 MATHEMATICS AND COMPUTING↗

NII Simulator 1.0

The software listed here is a simulator for SAIC P7500 VACIS non intrusive inspection system. The simulator provides messages similar to those provided by this piece of equipment.To facilitate testing of the Second Line of Defense systems and similar software products from commercial software vendors, this software simulation application has been developed to simulate the P7500 that the Second Line of Defense communications software system must interface with. The primary use of this simulator is for testing of both Sandia developed and DOE contractor developed software.

Jorgensen, Craig↗