Search NASA⌕ Search

SEARCH · Search NASA

Results for “complex surfaces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Supercritical CO2 Cleaning System for Planetary Protection and Contamination Control Applications

Current spacecraft-compatible cleaning protocols involve a vapor degreaser, liquid sonication, and alcohol wiping. These methods are not very effective in removing live and dead microbes from spacecraft piece parts of slightly complicated geometry, such as tubing and loosely fitted nuts and bolts. Contamination control practices are traditionally focused on cleaning and monitoring of particulate and oily residual. Vapor degreaser and outgassing bakeout have not been proven to be effective in removing some less volatile, hydrophilic biomolecules of significant relevance to life detection. A precision cleaning technology was developed using supercritical CO2 (SCC). SCC is used as both solvent and carrier for removing organic and particulate contaminants. Supercritical fluid, like SCC, is characterized by physical and thermal properties that are between those of the pure liquid and gas phases. The fluid density is a function of the temperature and pressure. Its solvating power can be adjusted by changing the pressure or temperature, or adding a secondary solvent such as alcohol or water. Unlike a regular organic solvent, SCC has higher diffusivities, lower viscosity, and lower surface tension. It readily penetrates porous and fibrous solids and can reach hard-to-reach surfaces of the parts with complex geometry. Importantly, the CO2 solvent does not leave any residue. The results using this new cleaning device demonstrated that both supercritical CO2 with 5% water as a co-solvent can achieve cleanliness levels of 0.01 mg/cm2 or less for contaminants of a wide range of hydrophobicities. Experiments under the same conditions using compressed Martian air mix, which consists of 95% CO2, produced similar cleaning effectiveness on the hydrophobic compounds. The main components of the SCC cleaning system are a high-pressure cleaning vessel, a boil-off vessel located downstream from the cleaning vessel, a syringe-type high-pressure pump, a heat exchanger, and a back pressure regulator (BPR). After soaking the parts to be cleaned in the clean vessel for a period, the CO2 with contaminants is flushed out of the cleaning vessel using fresh CO2 in a first-in-first-out (FIFO) method. The contaminants are either precipitating out in the boil-off container or being trapped in a filter subsystem. The parts to be cleaned are secured in a basket inside and can be rotated up to 1,400 rpm by a magnetic drive. The fluid flows within the vessel generate tangential forces on the parts surfaces, enhancing the cleaning effectiveness and shortening the soaking time. During the FIFO flushing, the pump subsystem pushes fresh CO2 into the cleaning vessel at a constant flow rate between 0.01 and 200 mL/min, while the BPR regulates the pressure in the cleaning vessel to within 0.1 bar by controlling the needle position in an outlet valve. The fresh CO2 gas flows through the heat exchanger at a given temperature before entering the cleaning vessel. A platinum resistance thermometer (PRT) reads the cleaning vessel interior temperature that can be controlled to within 0.1 K. As a result, cleaning vessel temperature remains constant during the FIFO flushing. There is no change in solvent power during FIFO flushing since both temperature and pressure inside the cleaning vessel remain unchanged, thus minimizing contaminants left behind. During decompression, both temperature and pressure are strictly controlled to prevent bubbles from generating in the cleaning vessel that could stir up the contaminants that sank to the bottom by gravity.

Lin, Ying↗
NASA NTRS1991

Thermal control surfaces experiment flight system performance

The Thermal Control Surfaces Experiment (TCSE) is the most complex system, other than the LDEF, retrieved after long term space exposure. The TCSE is a microcosm of complex electro-optical payloads being developed and flow by NASA and the DoD including SDI. The objective of TCSE was to determine the effects of the near-Earth orbital environment and the LDEF induced environment on spacecraft thermal control surfaces. The TCSE was a comprehensive experiment that combined in-space measurements with extensive post flight analyses of thermal control surfaces to determine the effects of exposure to the low earth orbit space environment. The TCSE was the first space experiment to measure the optical properties of thermal control surfaces the way they are routinely measured in a lab. The performance of the TCSE confirms that low cost, complex experiment packages can be developed that perform well in space.

Wilkes, Donald R.↗
NASA NTRS2021

The Effects of Surface Fossil Magnetic Fields on Massive Star Evolution – III. the Case of τ Sco

τ Sco, a well-studied magnetic B-type star in the Upper Sco association, has a number of surprising characteristics. It rotates very slowly and shows nitrogen excess. Its surface magnetic field is much more complex than a purely dipolar configuration which is unusual for a magnetic massive star. We employ the CMFGEN radiative transfer code to determine the fundamental parameters and surface CNO and helium abundances. Then, we employ MESA and GENEC stellar evolution models accounting for the effects of surface magnetic fields. To reconcile τ Sco’s properties with single-star models, an increase is necessary in the efficiency of rotational mixing by a factor of 3–10 and in the efficiency of magnetic braking by a factor of 10. The spin-down could be explained by assuming a magnetic field decay scenario. However, the simultaneous chemical enrichment challenges the single-star scenario. Previous works indeed suggested a stellar merger origin for τ Sco. However, the merger scenario also faces similar challenges as our magnetic single-star models to explain τ Sco’s simultaneous slow rotation and nitrogen excess. In conclusion, the single-star channel seems less likely and versatile to explain these discrepancies, while the merger scenario and other potential binary-evolution channels still require further assessment as to whether they may self-consistently explain the observables of τ Sco.

stars: evolution↗
NASA NTRS2021

The Effects of Surface Fossil Magnetic Fields on Massive Star Evolution - III. The Case of τSco

τSco, a well-studied magnetic B-type star in the Upper Sco association, has a number of surprising characteristics. It rotates very slowly and shows nitrogen excess. Its surface magnetic field is much more complex than a purely dipolar configuration which is unusual for a magnetic massive star. We employ the CMFGEN radiative transfer code to determine the fundamental parameters and surface CNO and helium abundances. Then, we employ MESA and GENEC stellar evolution models accounting for the effects of surface magnetic fields. To reconcileτSco’s properties with single-star models, an increase is necessary in the efficiency of rotational mixing by a factor of 3–10 and in the efficiency of magnetic braking by a factor of 10. The spin-down could be explained by assuming a magnetic field decay scenario. However, the simultaneous chemical enrichment challenges the single-star scenario. Previous works indeed suggested a stellar merger origin forτSco. However, the merger scenario also faces similar challenges as our magnetic single-star models to explainτSco’s simultaneous slow rotation and nitrogen excess. In conclusion, the single-star channel seems less likely and versatile to explain these discrepancies, while the merger scenario and other potential binary-evolution channels still require further assessment as to whether they may self-consistently explain the observables of τSco.

Z Keszthelyi↗
NASA NTRS1992

Gravitational microlensing - The effect of a single lens and the impact of sparse sampling

Topics in gravitational microlensing are examined. One issue is that even in cases in which the surface mass density is quite low, microlensing events cannot be considered as caused by individual stars. Whenever a high-magnification event occurs, the quasar has crossed a caustic. These caustics, however, are complex structures even for low surface-mass densities. This is illustrated by removing a single low-mass star from an ensemble of microlenses. The magnification patterns and light curves are compared with and without this star. The differences are striking and much more complex than expected. The effect of sparse sampling on the perception of microlensed light curves is examined, and attention is given to the influence of poor time coverage on simulated light curves. A regular monitoring program for microlensing candidates (especially 2237 + 0305) with a dedicated telescope is needed to make observations in different wavebands each night.

Wambsganss, Joachim↗
NASA NTRS1998

Surface Emissivity Derived From Multispectral Satellite Data

Surface emissivity is critical for remote sensing of surface skin temperature and infrared cloud properties when the observed radiance is influenced by the surface radiation. It is also necessary to correctly compute the longwave flux from a surface at a given skin temperature. Surface emissivity is difficult to determine because skin temperature is an ill-defined parameter. The surface-emitted radiation may arise from a range of surface depths depending on many factors including soil moisture, vegetation, surface porosity, and heat capacity. Emissivity can be measured in the laboratory for pure surfaces. Transfer of laboratory measurements to actual Earth surfaces, however, is fraught with uncertainties because of their complex nature. This paper describes a new empirical approach for estimating surface skin temperature from a combination of brightness temperatures measured at different infrared wavelengths with satellite imagers. The method uses data from the new Geostationary Operational Environmental Satellite (GOES) imager to determine multispectral emissivities from the skin temperatures derived over the ARM Southern Great Plains domain.

Minnis, P.↗
NASA NTRS2002

A Unified Overset Grid Generation Graphical Interface and New Concepts on Automatic Gridding Around Surface Discontinuities

For many years, generation of overset grids for complex configurations has required the use of a number of different independently developed software utilities. Results created by each step were then visualized using a separate visualization tool before moving on to the next. A new software tool called OVERGRID was developed which allows the user to perform all the grid generation steps and visualization under one environment. OVERGRID provides grid diagnostic functions such as surface tangent and normal checks as well as grid manipulation functions such as extraction, extrapolation, concatenation, redistribution, smoothing, and projection. Moreover, it also contains hyperbolic surface and volume grid generation modules that are specifically suited for overset grid generation. It is the first time that such a unified interface existed for the creation of overset grids for complex geometries. New concepts on automatic overset surface grid generation around surface discontinuities will also be briefly presented. Special control curves on the surface such as intersection curves, sharp edges, open boundaries, are called seam curves. The seam curves are first automatically extracted from a multiple panel network description of the surface. Points where three or more seam curves meet are automatically identified and are called seam corners. Seam corner surface grids are automatically generated using a singular axis topology. Hyperbolic surface grids are then grown from the seam curves that are automatically trimmed away from the seam corners.

Chan, William M.↗
NASA NTRS2011

The Use of ATLAS Data to Quantify Surface Radiative Budgets in Four US Cities

The additional heating of the air over the city is the result of the replacement of naturally vegetated surfaces with those composed of asphalt, concrete, rooftops and other manmade materials. The temperatures of these artificial surfaces can be 20 to 40 C higher than vegetated surfaces. This produces a dome of elevated air temperatures 5 to 8 C greater over the city, compared to the air temperatures over adjacent rural areas. This effect is called the "urban heat island". Urban landscapes are a complex mixture of vegetated and non-vegetated surfaces. It is difficult to take enough temperature measurements over a large city area to. The use of remotely sensed data from airborne scanners is ideal to characterize the complexity of urban albedo and radiant surface temperatures. The National Aeronautics and Space Administration (NASA) Airborne Thermal and Land Applications Sensor (ATLAS) operates in the visual and IR bands was used to collect data from Salt Lake City, UT, Sacramento, CA, Baton Rouge, LA. And San Juan, Puerto Rico with the main objective of investigating the Urban Heat Island (UHI). In this presentation we will examine the techniques of analyzing remotely sensed data for measuring the effect of various urban surfaces on their contribution to the urban heat island effect.

Luvall, Jeffrey↗
NASA NTRS1978

A semiclassical approach to collisional ionization with application to the Ar-He system

A semiclassical approach based on the propagation of classical trajectories on potential surfaces analytically continued into the complex plane, together with a discretization procedure, has been developed for the problem of collisional ionization. Based on Franck-Condon considerations the formalism is reduced to that of the two-state approximation. Preionization loss and tunnelling beyond turning points have not been considered. Calculated partial ionization cross sections for the Ar-He system show good agreement with a fully quantum mechanical treatment.

Lam, K.-S.↗
NASA NTRS1981

Ascent and eruption of basaltic magma on the earth and moon

The ascent and emplacement of basaltic magma on the earth and moon is modeled by the application of geological and physical observations and constraints. Relatively simple mathematical models of the motion of gas/liquid mixtures are shown to be adequate in the treatment of basaltic eruptions, provided that allowance is made for the coalescence of gas bubbles and that realistic geological and petrochemical constraints are applied to the numerical values of variables. Because gas exsolution from magmas on the earth and moon commonly occur at depths of less than 2 km, it is generally convenient to consider separately the rise of bubble-free magmatic liquid at depth in a planetary crust and the more complex motions occurring near the surface with gas exsolution.

Wilson, L.↗
NASA NTRS1983

Silicon sheet with molecular beam epitaxy for high efficiency solar cells

The capabilities of the new technique of Molecular Beam Epitaxy (MBE) are applied to the growth of high efficiency silicon solar cells. Because MBE can provide well controlled doping profiles of any desired arbitrary design, including doping profiles of such complexity as built-in surface fields or tandem junction cells, it would appear to be the ideal method for development of high efficiency solar cells. It was proposed that UCLA grow and characterize silicon films and p-n junctions of MBE to determine whether the high crystal quality needed for solar cells could be achieved.

Allen, F. G.↗
NASA NTRS1985

Some negative results in N-sided patches

To ease surface definition in situations of complex topology, patches with other than four sides and with guaranted continuity of at least slope with adjacent patches are needed. There are known techniques in the literature for three- and five-sided patches of reasonably economy, and known transfinite methods for many sides. Some of the conditions that a six-sided patch must satisfy and how certain simpler approaches are not effective are shown.

Sabin, M.↗
NASA NTRS1984

Achondrite ALHA77005 - Alteration of chromite and olivine

The olivine crystals of the 77005 achondrite are brown except for colorless shock lamellae, mottled patches, and grains adjacent to pools of impact melt. Sporadic dark alteration patches in brown olivine and Cr-rich spinel gave the following average electron-microprobe analyses: (olivine) P2O5 0.9, SiO2 57.9, TiO2 0, Al2O3 0.7, Cr2O3 0.4, V2O3 0, Fe2O3 (assumed oxidation state) 17.0, MgO 1.6, CaO 0.2, Na2O 0, K2O 1.8, SO3 (assumed oxidation state) 9.2, Cl 0.1, sum 89.8 wt pct; (spinel) P2O5 3.5, SiO2 2.1, TiO2 2.2, Al2O3 2.1, Cr2O3 13.4, V2O3 0.8, Fe2O3 40.7, MgO 0.9, CaO 0.1, Na2O 0, K2O 2.0, SO3 11.1, Cl 0.1, sum 79.0 wt pct. Ion-microprobe analyses revealed H in both. Rare orange patches in brown olivine from another area gave SiO2 33-35, FeO 30-28, MgO 28-32, sum 93 wt pct. Thermal metamorphism under dry oxidizing conditions is discussed as a possible alternative to shock-induced oxidation for generation of the brown olivine (McSween and Stoeffler, 1980). Because alteration patches transgress shock lamellae, and because sulfatic alteration occurs in fusion crusts of Antarctic meteorites (Gibson et al., 1983), alteration of the 77005 achondrite at the Antarctic surface is preferred to a complex series of processes needed for preterrestrial alteration.

Smith, J. V.↗
NASA NTRS1986

Biological consequences of a recurrent eddy off Point Conception, California

The biological effects on three different time scales (100-day mesoscale, annual, and several-year) of a mesoscale anticyclonic eddy consistently found in shipboard surveys and satellite-sensed data several hundred kilometers southwest of Point Conception, CA, are described. A detailed shipboard study of the eddy in January 1981 found a complex system of fronts in surface chlorophyll at the northern edge of the eddy; microplankton and zooplankton distributions were strongly affected by entrainment processes at the surface and, apparently, at depth. Concurrent satellite coastal zone color scanner ocean color images show agreement with the general surface characteristics of the eddy chlorophyll field but do not reflect features deeper than about 25 m, including the contribution of the deep chlorophyll maximum to the integrated chlorophyll values. Satellite data for the period October 1980 through October 1981 and shipboard data from California Cooperative Oceanic Fisheries Investigations (CalCOFI) for December 1980 to July 1981 show the continued presence of the eddy in the sea surface temperature and color field and in the distributions of surface chlorophyll and zooplankton displacement volume. A review of the CalCOFI survey results from 1949 to the present time demonstrates the recurrent nature of the eddy system on a year-to-year basis. The eddy system appears to have a significant effect on the distribution of both oceanic and nearshore organisms. Offshore transport of coastal species occurs in the form of large entrained plumes or filaments.

Haury, Loren R.↗
NASA NTRS1987

Experimental aerothermodynamic research of hypersonic aircraft

The 2-D and 3-D advance computer codes being developed for use in the design of such hypersonic aircraft as the National Aero-Space Plane require comparison of the computational results with a broad spectrum of experimental data to fully assess the validity of the codes. This is particularly true for complex flow fields with control surfaces present and for flows with separation, such as leeside flow. Therefore, the objective is to provide a hypersonic experimental data base required for validation of advanced computational fluid dynamics (CFD) computer codes and for development of more thorough understanding of the flow physics necessary for these codes. This is being done by implementing a comprehensive test program for a generic all-body hypersonic aircraft model in the NASA/Ames 3.5 foot Hypersonic Wind Tunnel over a broad range of test conditions to obtain pertinent surface and flowfield data. Results from the flow visualization portion of the investigation are presented.

Cleary, Joseph W.↗