Search NASA⌕ Search

SEARCH · Search NASA

Results for “contrast”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

Contrast Between 1992 and 1997 High Latitude Spring Haloe Observations of Lower Stratospheric HCl

HCl measurements from HALOE in the northern hemisphere during mid-May 1997 revealed vortex fragments in which the chlorine reservoir partitioning was strongly pushed toward HCl (approx. 90% HCl, approx. 10% ClONO2), similar to partitioning previously observed in the Antarctic vortex region. In contrast, observations of ClONO2 and HCl in the northern polar spring, 1992, and in other years, show these species established the balance typical for gas phase photochemical reactions in this region (approx. 60% HCl, approx. 40% ClONO2). Annually, chlorine reservoirs in the winter lower stratosphere polar vortex are converted to chlorine radicals via heterogeneous reactions on particle surfaces at very cold temperatures (less than about 200 K). As temperatures warm in spring, the heterogeneous processes become insignificant compared with gas phase reactions, and the chlorine reservoirs are reformed. Measurements through the northern winter/spring in 1992 show rapid formation of ClONO2, followed by steady loss of ClONO2 and increasing HCl. Although ClONO2 measurements are not available for 1997, the HCl increase in 1997 is observed to be much more rapid and the eventual HCl mixing ratio is about 50% greater than that of 1992. The observations are examined through comparison with the Goddard three-dimensional chemistry and transport model. This model utilizes winds and temperatures from the Goddard Earth Observing System Data Assimilation System and a complete integration scheme for stratospheric photochemistry. Analysis of the evolution of HCl and ClONO2 shows that the observed difference in the overall rate of HCl formation is explained by the sensitivity of the gas-phase chemistry to the ozone mixing ratio and the temperature. The results show that the model accurately simulates HCl and ClONO2 evolution during these two winters. Model validity is further supported by comparisons with O3 and reactive nitrogen species NO and NO2. This analysis provides a sensitive test of the lower stratospheric chlorine photochemistry, particularly because the analysis considers constituent evolution at a time when the HCl and ClONO2 are far from a photochemical stationary state.

Douglass, A. R.↗
NASA NTRS1999

The Effect of Penetration Depth on Thermal Contrast of NDT by Thermography

Nondestructive evaluation by Thermography (TNDE) is generally classified into two categories, the passive approach and the active approach. The passive approach is usually performed by measuring the natural temperature difference between the ambient and the material or structure to be tested. The active approach, on the other hand, requires the application of an external energy source to stimulate the material for inspection. A laser, a heater, a hot air blower, a high power thermal pulse, mechanical, or electromagnetic energy may provide the energy sources. For the external heating method to inspect materials for defects and imperfection at ambient temperature, a very short burst of heat can be introduced to one of the surfaces or slow heating of the side opposite to the side being observed. Due to the interruption of the heat flow through the defects, the thermal images will reveal the defective area by contrasting against the surrounding good materials. This technique is called transient Thermography, pulse video Thermography, or thermal wave imaging. As an empirical rule, the radius of the smallest defect should be at least one to two times larger than its depth under the surface. Thermography is being used to inspect void, debond, impact damage, and porosity in composite materials. It has been shown that most of the defects and imperfection can be detected. However, the current method of inspection using thermographic technique is more of an art than a practical scientific and engineering approach. The success rate of determining the defect location and defect type is largely depend on the experience of the person who operates thermography system and performs the inspection. The operator has to try different type of heat source, different duration of its application time, as well as experimenting with the thermal image acquisition time and interval during the inspection process. Further-more, the complexity of the lay-up and structure of composites makes it more difficult to determine the optimal operating condition for revealing the defects. In order to develop an optimal thermography inspection procedure, we must understand the thermal behavior inside the material subjected to transient heat in order to interpret the thermal images correctly. Fabrication of finite element models of characteristic defects in composite materials subjected to transient heat will enable the development of appropriate procedure for thermography inspection. Design of phantom defects could be modeled and behavior characterized prior to physically building these test parts. Since production of phantom test parts can be very time consuming and laborious, it is important to design good representative defects.

Chu, Tsuchin Philip↗
NASA NTRS2001

Fractionation Trends Among IVA Iron Meteorites: Contrasts with IIIAB Trends

A neutron-activation study of 49 group-IVA irons shows much lower negative slopes on Ir-Au and Ir-As diagrams than observed in the larger magmatic group IIIAB. This difference seems to reflect the tendency of D(sub Ir), D(sub Au), and D(sub As) to increase with increasing S content. Contents of S and other volatiles are much lower in IVA irons than IIIAB irons. We show that both groups can be fit with Dx values that depend quadratically on S, with initial IVA S contents about 6X lower than those in IIIAB. The IVA scatter fields show a spread in Au or As at constant Ir that appears to reflect variations in the fraction of trapped melt between 0% and 30%. Copper shows an S-shaped trend that may reflect moderate positive and negative changes in D(sub Cu) as the magma evolved or, less likely, sampling variations in a broad band reflecting fractionation and trapping of melt. Gibeon, the largest IVA iron with a mass greater than 30 tons, shows an appreciable range in compositions consistent either with differences in the degree of magma crystallization or with differences in the content of trapped melt. A striking difference between IVA and IIIAB is observed in the Ir/Au ratios in the most Ir-rich irons in the groups; that in IVA is 40% lower than the IIIAB ratio, and lower than those in other iron-meteorite groups, The IVA Ir/Au ratio is about half the ratios in the chondrite groups. We examined three possible explanations of this anomaly: (1) the high-Ir irons contain large amounts of trapped melt: or (2) half of the IVA core (i.e., the first 50% to crystallize) is missing from the terrestrial set of IVA irons; or (3) the IVA magma formed by incomplete melting of the metal in the chondritic precursor material, with the metal that remained in the mantle having high Ir and low Au contents. Plausibility arguments favor the third possibility. The third scenario is the most plausible, but the second cannot be ruled out. We review recent evidence regarding the cooling rates in group IVA. In contrast to recent interpretations, we note several lines of evidence that indicate constant cooling rates independent of composition, as expected if all IVA meteorites were in the same core when cooling between 900 and 650 K occurred.

Wasson, J. T.↗
NASA NTRS1995

Image Discrimination Predictions of a Single Channel Model with Contrast Gain Control

Image discrimination models predict the number of just-noticeable-differences between two images. We report the predictions of a single channel model with contrast masking for a range of standard discrimination experiments. Despite its computational simplicity, this model has performed as well as a multiple channel model in an object detection task.

Ahumada, Albert J., Jr.↗
NASA NTRS2002

Laser Image Contrast Enhancement System

An optical image enhancement system provides improved image contrast in imaging of a target in high temperature surroundings such as a furnace. The optical system includes a source of vertically polarized light such as laser and a beam splitter for receiving the light and directing the light toward the target. A retardation plate is affixed to a target-facing surface of the beam splitter and a vertical polarizer is disposed along a common optical path with the beam splitter between the retardation plate and the target. A horizontal polarizer disposed in the common optical path, receives light passing through a surface of the beam splitter opposed to the target-facing surface. An image detector is disposed at one end of the optical path. A band pass filter having a band pass filter characteristic matching the frequency of the vertically polarized light source is disposed in the path between the horizontal polarizer and the image detector. The use of circular polarization, together with cross polarizers, enables the reflected light to be passed to the detector while blocking thermal radiation.

Robert L Kurtz↗
NASA NTRS2003

30-Year Satellite Record Reveals Contrasting Arctic and Antarctic Decadal Sea Ice Variability

A 30-year satellite record of sea ice extents derived mostly from satellite microwave radiometer observations reveals that the Arctic sea ice extent decreased by 0.30+0.03 x 10(exp 6) square kilometers per 10 yr from 1972 through 2002, but by 0.36 plus or minus 0.05 x 10(exp 6) square kilometers per 10yr from 1979 through 2002, indicating an acceleration of 20% in the rate of decrease. In contrast, the Antarctic sea ice extent decreased dramatically over the period 1973-1977, then gradually increased. Over the full 30-year period, the Antarctic ice extent decreased by 0.15 plus or minus 0.08 x 10(exp 6) square kilometers per 10 yr. The trend reversal is attributed to a large positive anomaly in Antarctic sea ice extent in the early 1970's, an anomaly that apparently began in the late 1960's, as observed in early visible and infrared satellite images.

Cavalieri, D. J.↗
NASA NTRS2005

Dependence of Surface Contrast on Emission Angle in Cassini ISS 938-nm Images of Titan

Titan, the largest of Saturn s moons, is one of the most difficult solid surfaces in the Solar System to study. It is shrouded in a thick atmosphere with fine haze particles extending up to 500 km. [1] The atmosphere itself is rich in methane, which allows clear viewing of the surface only through narrow "windows" in the methane spectrum. Even in these methane windows, the haze absorbs and scatters light, blurring surface features and reducing the contrast of images. The haze optical depth is high at visible wavelengths, and decreases at longer (infrared) wavelengths. [2]

Fussner, S.↗
NASA NTRS2006

Noninvasive 3D Visualization of Defects and Crack Propagation in Layered Foam Structures by Phase Contrast Microimaging

Applications of polymeric foams in our modern society continue to grow because of their light weight, high strength, excellent thermal and mechanical insulation, and the ease of engineering. Among others, closed-cell foam has been structurally used for thermally insulating the shuttle external tank. However, internal defects of the foams were difficult to observe non-invasively due to limited sensitivity to the low-density structures possessed by traditional imaging tools such as computed X-ray tomography By combining phase contrast X-ray imaging with pressure loading, we succeeded in precisely mapping intact cellular structure and defects inside the bulk of layered foam and visualizing its subsequent response to the pressure in three-dimensional space. The work demonstrated a powerfir1 approach for yielding insight into underlying problems in lightweight cellular materials otherwise unobtainable.

Hu, Z. W.↗
NASA NTRS2006

Contrasts in Sea Ice Formation and Production in the Arctic Seasonal and Perennial Ice Zones

Four years (1997-2000) of RADARSAT Geophysical Processor System (RGPS) data are used to contrast the sea ice deformation and production regionally, and in the seasonal (SIZ) and perennial (PIZ) ice zones. Ice production is of seasonal ice in openings during the winter. 3-day estimates of these quantities are provided within Lagrangian elements initially 10 km on a side. A distinct seasonal cycle is seen in both zones with these estimates highest in the late fall and with seasonal minimums in the mid-winter. Regional divergence over the winter could be up to 30%. Spatially, the highest deformation is in the SIZ north of coastal Alaska. Both ice deformation and production are higher in the SIZ: deformation-related ice production in the SIZ (approx.0.5 m) is 1.5-2.3 times that of the PIZ (approx.0.3 m) - this is connected to ice strength and thickness. Atmospheric forcing and boundary layer structure contribute to only the seasonal and interannual variability. Seasonal ice growth in ice fractures accounts for approx.25-40% of the total ice production of the Arctic Ocean. By itself, this deformation-ice production relationship could be considered a negative feedback when thickness is perturbed. However, the overall effect on ice production in the face of increasing seasonal and thinner/weaker ice coverage could be modified by: local destabilization of the water column promoting overturning of warmer water due to increased brine rejection; and, the upwelling of the pynocline associated with increased occurrence of large shear motion in sea ice.

Kwok, R.↗
NASA NTRS2006

Contrasts in Sea Ice Deformation and Production in the Arctic Seasonal and Perennial Ice Zones

Four years (1997-2000) of RADARSAT Geophysical Processor System (RGPS) data are used to contrast the sea ice deformation and production regionally, and in the seasonal (SIZ) and perennial (PIZ) ice zones. Ice production is of seasonal ice in openings during the winter. Three-day estimates of these quantities are provided within Lagrangian elements initially 10 km on a side. A distinct seasonal cycle is seen in both zones with these estimates highest in the late fall and with seasonal minimums in the midwinter. Regional divergence over the winter could be up to 30%. Spatially, the highest deformation is seen in the SIZ north of coastal Alaska. Both ice deformation and production are higher in the SIZ: deformation-related ice production in the SIZ (approx.0.5 m) is 1.5-2.3 times that of the PIZ (approx.0.3 m): this is connected to ice strength and thickness. Atmospheric forcing and boundary layer structure contribute to only the seasonal and interannual variability. Seasonal ice growth in ice fractures accounts for approx.25-40% of the total ice production of the Arctic Ocean. Uncertainties in these estimates are discussed. By itself, this deformation-ice production relationship could be considered a negative feedback when thickness is perturbed. However, the overall effect on ice production in the face of increasing seasonal and thinner/weaker ice coverage could be modified by local destabilization of the water column promoting overturning of warmer water due to increased brine rejection; and the upwelling of the pynocline associated with increased occurrence of large shear motion in sea ice. Divergence is shown to be negligibly correlated to cyclonic motion in summer and winter in both ice zones.

Arctic Ocean↗
NASA NTRS2005

An Off-Axis Four-Quadrant Phase Mask (FQPM) Coronagraph for Palomar: High-Contrast Near Bright Stars Imager

Direct detection of planets around nearby stars requires the development of high-contrast imaging techniques because of the high difference between their respective fluxes. This led us to test a new coronagraphic approach based on the use of phase mask instead of dark occulting ones. Combined with high-level wavefront correction on an unobscured off-axis section of a large telescope, this method allows imaging very close to the star. Calculations indicate that for a given ground-based on-axis telescope, use of such an off-axis coronagraph provides a near-neighbor detection capability superior to that of a traditional coronagraph utilizing the full telescope aperture. Setting up a laboratory experiment working in near infrared allowed us to demonstrate the principle of the method, and a rejection of 2000:1 has already been achieved.

coronagraphy↗
NASA NTRS1997

Beat frequency ultrasonic microsphere contrast agent detection system

A system for and method of detecting and measuring concentrations of an ultrasonically-reflective microsphere contrast agent involving detecting non-linear sum and difference beat frequencies produced by the microspheres when two impinging signals with non-identical frequencies are combined by mixing. These beat frequencies can be used for a variety of applications such as detecting the presence of and measuring the flow rates of biological fluids and industrial liquids, including determining the concentration level of microspheres in the myocardium.

Pretlow, III, Robert A.↗
NASA NTRS2007

A Contrast in Use of Metrics in Earth Science Data Systems

In recent years there has been a surge in the number of systems for processing, archiving and distributing remotely sensed data. Such systems, working independently as well as in collaboration, have been contributing greatly to the advances in the scientific understanding of the Earth system, as well as utilization of the data for nationally and internationally important applications. Among such systems, we consider those that are developed by or under the sponsorship of NASA to fulfill one of its strategic objectives: "Study Earth from space to advance scientific understanding and meet societal needs." NASA's Earth science data systems are of varying size and complexity depending on the requirements they are intended to meet. Some data systems are regarded as NASA's "Core Capabilities" that provide the basic infrastructure for processing, archiving and distributing a set of data products to a large and diverse user community in a robust and reliable manner. Other data systems constitute "Community Capabilities". These provide specialized and innovative services to data users and/or research products offering new scientific insight. Such data systems are generally supported by NASA through peer reviewed competition. Examples of Core Capabilities are 1. Earth Observing Data and Information System (EOSDIS) with its Distributed Active Archive Centers (DAACs), Science Investigator-led Processing Systems (SIPSs), and the EOS Clearing House (ECHO); 2. Tropical Rainfall Measurement Mission (TRMM) Science Data and Information System (TSDIS); 3. Ocean Data Processing System (ODPS); and 4. CloudSat Data Processing Center. Examples of Community Capabilities are projects under the Research, Education and Applications Solutions Network (REASON), and Advancing Collaborative Connections for Earth System Science (ACCESS) Programs. In managing these data system capabilities, it is necessary to have well-established goals and to measure progress relative to them. Progress is measured through "metrics", which can be a combination of quantitative as well as qualitative assessments. The specific metrics of interest depend on the user of the metrics as well as the type of data system. The users of metrics can be data system managers, program managers, funding agency or the public. Data system managers need metrics for assessing and improving the performance of the system and for future planning. Program managers need metrics to assess progress and the value of the data systems sponsored by them. Also, there is a difference in the metrics needed for core capabilities that tend to be more complex, larger and longer-term compared to community capabilities and the community capabilities that tend to be simpler, smaller and shorter-term. Even among community capabilities there are differences; hence the same set of metrics does not apply to all. Some provide data products to users, some provide services that enable better utilization of data or interoperability among other systems, and some are a part of a larger project where provision of data or services is only a minor activity. There is also a contrast between metrics used for internal and external purposes. Examples of internal purposes are: ensuring that the system meets its requirements, and planning for evolution and growth. Examples of external purposes are: providing to sponsors indicators of success of the systems, demonstrating the contributions of the system to overall program success, etc. This paper will consider EOSDIS, REASON and ACCESS programs to show the various types of metrics needed and how they need to be tailored to the types of data systems while maintaining the overall management goals of measuring progress and contributions made by the data systems.

Ramapriyan, Hampapuram↗
NASA NTRS2007

Contrasts Between Precipitation over Mediterranean Sea and Adjacent Continental Areas Based on Decadal Scale Satellite Estimates

Most knowledge concerning the last century's climatology and climate dynamics of precipitation over the Mediterranean Sea basin is based on observations taken from rain gauges surrounding the sea itself. In turn, most of the observations come from Southern Europe, with many fewer measurements taken from widely scattered sites situated over North Africa, the Middle East, and the Balkans. This aspect of research on the Mediterranean Sea basin is apparent in a recent compilation of studies presented in book form concerning climate variability of the Mediterranean region [Lionello, P., P. Malanotte-Rizzoli, and R. Boscolo (eds.), 2006: Mediterranean Climate Variability. Elsevier, Amsterdam, 9 chapters.] In light of this missing link to over-water observations, this study (in conjunction with four companion studies by Z. Haddad, A. Mugnai, T. Nakazawa, and G. Stephens) will contrast the nature of precipitation variability directly over the Mediterranean Sea to precipitation variability over the surrounding land areas based on three decades of satellite-based precipitation estimates which have stood up well to validation scrutiny. The satellite observations are drawn from the Global Precipitation Climatology Project (GPCP) dataset extending back to 1979 and the TRMM Merged Algorithm 3b42 dataset extending back to 1998. Both datasets are mostly produced from microwave measurements, excepting the period from 1979 to mid-1987 when only infrared satellite measurements were available for the GPCP estimates. The purpose of this study is to emphasize how the salient properties of precipitation variability over land and sea across a hierarchy of space and time scales, and the salient differences in these properties, might be used in guiding short-term climate models to better predictions of future climate states under different regional temperature-change scenarios.

Smith, Eric A.↗
NASA NTRS2009

Spaceflight Systems Training: A Comparison and Contrasting of Techniques for Training Ground Operators and Onboard Crewmembers

When developing techniques and products for instruction on manned spaceflight systems, training organizations are often faced with two very different customers: ground operators and onboard crewmembers. Frequently, instructional development focuses on one of these customers with the assumption that the other s needs will be met by default. Experience teaches us that differing approaches are required when developing training tailored to the specific needs of each customer. As a rule, ground operators require focused instruction on specific areas of expertise. Their knowledge should be of the details of the hardware, software, and operational techniques associated with that system. They often benefit from historical knowledge of how their system has operated over its lifetime. Since several different ground operators may be interfacing with the same system, each individual operator must understand the agreed-to principles by which that system will be run. In contrast, onboard crewmembers require a more broad, hands-on awareness of their operational environment. Their training should be developed with an understanding of the physical environment in which they live and work and the day-to-day tasks they are most likely to perform. Rarely do they require a deep understanding of the details of a system; it is often sufficient to teach them just enough to maintain situational awareness and perform basic tasks associated with maintenance and operation of onboard systems. Crewmembers may also develop unique onboard operational techniques that differ from preceding crews. They should be taught what flexibility they have in systems operations and how their specific habits can be communicated to ground support personnel. This paper will explore the techniques that can be employed when developing training for these unique customers. We will explore the history of International Space Station training development and how past efforts can guide us in creating training for users of future manned spaceflight efforts.

Balmain, Clinton↗
NASA NTRS2005

A Case Study in High Contrast Coronagraph for Planet Discovery: The Eclipse Concept and Support Laboratory Experience

Eclipse is a proposed NASA Discovery mission to perform a sensitive imaging survey of nearby planetary systems, including a survey for jovian-sized planets orbiting Sun-like stars to distances of 15 pc. We outline the science objectives of the Eclipse mission and review recent developments in the key enabling technologies. Eclipse is a space telescope concept for high-contrast visible-wavelength imaging and spectrophotometry. Its design incorporates a telescope with an unobscured aperture of 1.8 meters, a coronographic camera for suppression of diffracted light, and precise active wavefront correction for the suppression of scattered background light. For reference, Eclipse is designed to reduce the diffracted and scattered starlight between 0.33 and 1.5 arcseconds from the star by three orders of magnitude compared to any HST instrument. The Eclipse mission provides precursor science exploration and technology experience in support of NASA's Terrestrial Planet Finder (TPF) program.

coronagraphic imaging testbed↗
NASA NTRS2010

Electrical Capacitance Volume Tomography with High-Contrast Dielectrics

The Electrical Capacitance Volume Tomography (ECVT) system has been designed to complement the tools created to sense the presence of water in nonconductive spacecraft materials, by helping to not only find the approximate location of moisture but also its quantity and depth. The ECVT system has been created for use with a new image reconstruction algorithm capable of imaging high-contrast dielectric distributions. Rather than relying solely on mutual capacitance readings as is done in traditional electrical capacitance tomography applications, this method reconstructs high-resolution images using only the self-capacitance measurements. The image reconstruction method assumes that the material under inspection consists of a binary dielectric distribution, with either a high relative dielectric value representing the water or a low dielectric value for the background material. By constraining the unknown dielectric material to one of two values, the inverse math problem that must be solved to generate the image is no longer ill-determined. The image resolution becomes limited only by the accuracy and resolution of the measurement circuitry. Images were reconstructed using this method with both synthetic and real data acquired using an aluminum structure inserted at different positions within the sensing region. The cuboid geometry of the system has two parallel planes of 16 conductors arranged in a 4 4 pattern. The electrode geometry consists of parallel planes of copper conductors, connected through custom-built switch electronics, to a commercially available capacitance to digital converter. The figure shows two 4 4 arrays of electrodes milled from square sections of copper-clad circuit-board material and mounted on two pieces of glass-filled plastic backing, which were cut to approximately square shapes, 10 cm on a side. Each electrode is placed on 2.0-cm centers. The parallel arrays were mounted with the electrode arrays approximately 3 cm apart. The open ends were surrounded by a metal guard to reduce the sensitivity of the electrodes to outside interference and to help maintain the spacing between the arrays. Other uses for this innovation potentially include quantifying the amount of commodity remaining in the fuel and oxidizer tanks while on-orbit without having to fire spacecraft engines. Another orbit application is moisture sensing in plant-growth experiments because microgravity causes moisture in soil to distribute itself in unusual ways. At the moment, the hardware and image reconstruction technique may only be of interest to people involved in nondestructive evaluation. The reconstructed image takes almost a full week to reproduce with existing computer power. However, because computer power and speeds follows Moore s Law, execution times are likely to become acceptable within the next five to eight years. The code was written in Mathematica for dedicated use with the ECVT system. In its present form, it is not suitable to be used directly as a consumer product. However, the code could be likely improved by rewriting it in a compiled language such as C or Fortran.

Nurge, Mark↗