Search NASA⌕ Search

SEARCH · Search NASA

Results for “coronal loop”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Forerunners - Outer rims of solar coronal transients

The large loop or blob-like transient events viewed in the white-light corona are rimmed by broad regions where the density is slightly enhanced above the pretransient corona. Every one of the Skylab events studied for which sufficiently good Skylab coronagraph coverage is available shows this effect. The upper boundaries of these 'forerunners' blend gradually into the background corona 1-2 solar radii above the transient's leading edges. In any single event, the coronal mass enhancement represented by the forerunner comprises up to 25% of the total excess mass present in the coronagraph's field of view and includes a much larger volume of the corona than previously attributed to the underlying transient. A forerunner without an accompanying transient has not yet been seen. Clearly, forerunners must be reckoned with in any proposed models of discrete outward coronal mass motions, because they indicate the presence of disturbed corona far ahead of the denser portions of the event.

Jackson, B. V.↗

Numerical simulations of flares on M dwarf stars. I - Hydrodynamics and coronal X-ray emission

Flare-loop models are utilized to simulate the time evolution and physical characteristics of stellar X-ray flares by varying the values of flare-energy input and loop parameters. The hydrodynamic evolution is studied in terms of changes in the parameters of the mass, energy, and momentum equations within an area bounded by the chromosphere and the corona. The zone supports a magnetically confined loop for which processes are described including the expansion of heated coronal gas, chromospheric evaporation, and plasma compression at loop footpoints. The intensities, time profiles, and average coronal temperatures of X-ray flares are derived from the simulations and compared to observational evidence. Because the amount of evaporated material does not vary linearly with flare-energy input, large loops are required to produce the energy measured from stellar flares.

Cheng, Chung-Chieh↗

Evidence for Magnetic Reconnection in Three Homologous Solar Flares Observed by RHESSI

We present RHESSI observF5oss of three homologous flares, which occurred between April 14 and 16, 2002. We find that the RHESSI images of all three flares at energies between 6 and 25 keV had some common features: (1) A. separate coronal source up to approx. 30 deg. above the flare loop appeared in the early impulsive phase and stayed stationary for several minutes. (2) Before the flare loop moved upward; previously reported by others, the flare loop-top centroid moved downward for 2-4 minutes during the early impulsive phase of the Ears: falling by 13 - 30% of its initial height with a speed between 8 and 23 km/s. We conclude that these features are associated with the formation and development of a current sheet between the loop-top and the coronal source. In the April 14-15 flare, we find that the hard X-ray flux (greater than 25 keV) is correlated with the rate at which the flare loop moves upward, indicating that the faster the loop grows, the faster the reconnection rate, and therefore, the greater the flux of accelerated electrons. Subject headings: Sun: L'iaies-Sun: X-1-ay-s -

Sui, Lin-Hui↗

Decameter radio and white light observations of the 21 August 1973 coronal transient

The forces driving the ejecta of the coronal transient of August 21, 1973 are estimated using physical parameters derived by joint radio and white light observations. The radio emission associated with the transient was continuum in nature, and lasted for almost 5 hours. Simultaneous radio and white light measurements show that the radio source was cospatial with one of the secondary white light loops. Assuming a coronal temperature of 1,500,000 K, the results yield an approximate equality of the gas and magnetic pressures at 2.0 solar radii. It is concluded that for this transient, the gas is strongly influenced by changes in the magnetic field.

Gergely, T. E.↗

Electron-heated flare models - Alive and well

Recent results of quantitative tests of the thick-target electron-heated model (Brown, 1973) are reviewed. The spatial structure of the hard X-ray emission in the 3.5-30 keV range was examined, and it is shown that initially the emission is dominated by footpoint emission caused by the impact of the electron beam on the dense chromospheric layers of the loop, while later the emission comes primarily from the upper coronal parts of the loop. Another diagnostic examined was the shape of the Ca XIX soft X-ray line spectrum.

Emslie, A. Gordon↗

Gamma-ray and millimeter-wave emissions from the 1991 June X-class solar flares

We have studied the spectacular 1991 June X-class flares using gamma-ray data from the Charged Particle Detectors (CPDs) of the Burst and Transient Source Experiment (BATSE) on the Compton Gamma Ray Observatory (CGRO) and 80 GHz millimeter data from Nobeyama, Japan. The CPDs were the only CGRO instrument that did not saturate during the extremely intense 1991 June 4 flare. We have shown that for this flare the CPDs respond to MeV photons, most of which are due to bremsstrahlung produced by relativistic electrons at the Sun. We have further shown that the gamma-ray and millimeter observations agree numerically if the 80 GHz radiation is gyrosynchrotron radiation produced by trapped electrons and the gamma rays are thick-target bremsstrahlung due to electrons precipitating out of the trap. The requirement that the trapping time obtained from the numerical comparison be consistent with the observed time profiles implies a magnetic field between about 200 and 300 G and an electron spectral index between about 3 to 5. By comparing the CPD observations with both the 80 GHz data and nuclear line data from the Energetic Gamma Ray Experiment Telescope (EGRET) and the Oriented Scintillation Spectroscopy Experiment (OSSE) on CGRO for the flares of June 4, 6, 9, and 11, we found that the ratio of the CPD counts to both the millimeter flux densities and the nuclear line fluences decreases with decreasing flare heliocentric angle. All of these flares were produced in the same active region. We interpreted this result in terms of a loop model in which the gyrosynchrotron emission is produced in the coronal portion of the loop where the electrons are kept isotropic by pitch angle scattering due to plasma turbulence, while the bremsstrahlung is produced by precipitating electrons that interact anisotropically. We found that the trapping time in the coronal portion is time dependent, reaching a minimum of about 10 s at the peak of the CPD count rate. We suggested the damping of the turbulence as a possible reason for the variation of the trapping time. turbulence as a possible reason for the variation of the trapping time.

Ramaty, Reuven↗

Physical conditions in the solar atmosphere above an active region

From a series of EUV spectra obtained at several heights above the limb in a solar active region, the volume emission measure is derived as a function of the electron temperature in the temperature range 70,000-1,500,000 K and the electron density at two locations. The emission measure from the coronal material (temperature greater than 700,000 K) is nearly the same everywhere and represents most of the material in the line of sight, while the emission measure from the transition region material (temperature between 70,000 and 250,000 K) fluctuates by two orders of magnitude from position to position above the active region. This is in agreement with the picture of this active region as consisting of a number of well-defined loops or lower portions of loops at transition region temperatures that are inhomogeneously distributed in much larger and more diffuse loop structures at coronal temperatures. The coronal data are in reasonable agreement with simple coronal models. Emission measures near 1,000,000 K evaluated using different ions differ by a factor of 4, suggesting difficulties with the atomic physics data.

Mariska, J. T.↗

Particle propagation, wave growth and energy dissipation in a flaring flux tube

Wave amplification by downgoing particles in a common flare model is investigated. The flare is assumed to occur at the top of a coronal magnetic flux loop, and results in the heating of plasma in the flaring region. The hot electrons propagate down the legs of the flux tube towards increasing magnetic field. It is simple to demonstrate that the velocity distributions which result in this model are unstable to both beam instabilities and cyclotron maser action. An explanation is presented for the propagation effects on the distribution, and the properties of the resulting amplified waves are explored, concentrating on cyclotron maser action, which has properties (emission in the z mode below the local gyrofrequency) quite different from maser action by other distributions considered in the context of solar flares. The z mode waves will be damped in the coronal plasma surrounding the flaring flux tube and lead to heating there. This process may be important in the overall energy budget of the flare. The downgoing maser is compared with the loss cone maser, which is more likely to produce observable bursts.

White, S. M.↗

Study of optical properties of X-ray sources

A series of optical and X-ray observations of Sco X-1 and Cyg X-2 by UHURU satellite is reported. Results for Sco X-1 show a definite correlation between optical and X-ray intensity and thus indicate a common emitting region with the source being quiet and having no short term fluctuations bigger than 10%. Spectra reveal the presence of a high excitation complex at wavelength 4650 due to N III-C III. Spectra of a faint 15-mag red object NW of the radio position indicate that Cyg X-1 is associated with a bright B supergiant star. The flux from the edges of the Cygnus Loop in the coronal line at wavelength 5303 was measured to be less than five times ten to the minus nine power erg/sq cm/sterad/sec (0.017 R) in a 3-A band centered on the line. This indicates substantial broadening of the line profile by mass motion or that the temperature is somewhat higher than the present estimate from X-ray data.

Vandenbout, P. A.↗

XUV results from Skylab

The extreme ultraviolet spectroheliograph of the Skylab-ATM experiment S082A recorded 1000 exposures during the mission, covering the wavelength range from 171 to 335 A or from 315 to 630 A. Each exposure recorded a spectrum of solar images with spatial resolution reaching 2 arc sec. Among the features observed were the chromospheric network, filaments, active regions, XUV bright points, the limb, spicules, prominences, coronal holes, and loops. During the mission, a number of flares were photographed; the images showed the changing form of a flare in different lines from the chromosphere to the corona as well as how this form changed during the course of the flare. The spectral images of a number of eruptive prominences were also recorded.

Tousey, R.↗

Collisional damping of surface waves in the solar corona

The damping of surface waves by viscosity and heat conduction is evaluated. For the solar corona, it is found that surface waves dissipate efficiently only if their periods are shorter than a few tens of seconds and only if the background magnetic field is less than about 10 Gauss. Heating of quiet coronal regions is possible if the coronal waves have short periods, but they cannot heat regions of strong magnetic field, such as coronal active region loops.

Gordon, B. E.↗

Simultaneous observations of hard X-ray and microwave burst sources in a limb flare

Observations of a flare which occurred just behind the west solar limb on 1981 August 3 are reported. A hard X-ray source (20-30 keV) and a microwave source at 5 GHz were observed simultaneously using the Very Large Array and the hard X-ray telescope aboard the Hinotori spacecraft. Both sources were located in the corona, apparently near the tops of two independent coronal arcades or loops. The source may be composed of many thin filaments unresolved by the VLA observations.

Takakura, T.↗

Solar gradual hard X-ray bursts - Observations and an interpretation

A recent study of solar gradual hard X-ray bursts is summarized. The data are interpreted in terms of a model involving the acceleration and trapping of electrons in post flare loop systems following coronal mass ejections. A controversy about the classification of the metric continuum that typically accompanies gradual hard X-ray events is addressed.

Cliver, E. W.↗

High resolution VLA-Nancay observations of the sun

The Very Large Array (VLA) and the Nancay Radioheliograph (NR) can be used in the 1990s to provide unique observations of the quiescent and active corona. The combined data can specify the evolution and magnetic structure at a variety of heights in the quiescent corona, from compact to extended structures such as loops, streamers and coronal holes. The scientific potential of simultaneous VLA-NR research is illustrated by observations of solar noise storms with hitherto unavailable resolution in space (VLA) and time (NR). Unique information will also be provided for other types of solar bursts, leading to an improved understanding of solar activity during the coming maximum.

Kerdraon, A.↗

A bubblelike coronal mass ejection flux rope in the solar wind

A resolution to the question of whether coronal mass ejections are loops or bubbles is proposed and applied to the geometrical analysis of a solar wind event detected at 1 AU by ISEE 1 and 3. The discontinuity orientations, the size determined by time of passage, and the magnetic cloud signature are fit into the topology of a flux rope loop distorted by expansion into a thick rope with comparable dimensions in both the ecliptic and meridional planes. The looped rope fills a bubblelike cavity, thus preserving both types of proposed coronal mass ejection geometries. Other interesting features of the data include an apparent separation by the rope core of bidirectionally streaming protons in the leading section from electrons in the trailing section, possible vortical flow within the magnetic cloud, and a well-defined filamentary structure behind the shock.

Crooker, N. U.↗

Formation, levitation, and stability of prominences in the magnetized solar atmosphere

The dynamic formation of prominences in the initial magnetothermal equilibrium and their stability to sideward displacements are investigated focusing on the structure of the 2D solar atmosphere in the presence of coronal arcades or loops. A model based on 2D magnetohydrodynamic equations takes into account gravity, compressible flows, heating, radiation, anisotropic thermal conduction, and coupling to a deep chromosphere. It is found that prominences in simple arcades characterized by magnetic field with significant curvature at the apex are unstable to a lateral displacement.

Drake, J. F.↗

Coronal heating by the resonant absorption of Alfven waves - Importance of the global mode and scaling laws

Numerical simulations of the MHD equations for a fully compressible, low-beta, resistive plasma are used to study the resonance absorption process for the heating of coronal active region loops. Comparisons with more approximate analytic models show that the major predictions of the analytic theories are, to a large extent, confirmed by the numerical computations. The simulations demonstrate that the dissipation occurs primarily in a thin resonance layer. Some of the analytically predicted features verified by the simulations are (a) the position of the resonance layer within the initial inhomogeneity; (b) the importance of the global mode for a large range of loop densities; (c) the dependence of the resonance layer thickness and the steady-state heating rate on the dissipation coefficient; and (d) the time required for the resonance layer to form. In contrast with some previous analytic and simulation results, the time for the loop to reach a steady state is found to be the phase-mixing time rather than a dissipation time. This disagreement is shown to result from neglect of the existence of the global mode in some of the earlier analyses. The resonant absorption process is also shown to behave similar to a classical driven harmonic oscillator.

Steinolfson, Richard S.↗

Coronal magnetic field diagnostics via the Hanle effect of Lyman series lines

The magnetic field plays a major role in the physics of the solar corona. However, there are no direct measurements of this physical parameter. We describe a method that can provide the most direct determination of the vector magnetic field in the extended corona (i.e., at heliocentric heights between 1.2 R(solar radius) and 2.0 R(solar radius)). The method is based on polarimetric observations of UV lines of the Lyman series, that is, Lyman alpha (Ly-alpha), lambda 1216 A, Lyman beta (Ly-beta), lambda 1025 A, and Lyman gamma (Ly-gamma), lambda 972 A. These lines have a collisional and a resonantly scattered component. Linear polarization is induced in the resonant component by the anisotropy in the chromospheric radiation field that illuminates the corona. Magnetic fields can be suitably determined through the effects that they induce on this resonance polarization (Hanle effect). The Hanle effect of the Ly-alpha is sensitive to field strengths in the 10 - 100 gauss range. The resonance polarization of Ly-beta and Ly-gamma is sensitive, through the Hanle effect, to fields with strengths between 3 - 30 gauss, and 0.3 - 6 gauss, respectively. We describe a new method for separating the resonant from the collisional component of the Ly-beta and Ly-gamma; the method is based on the approximation, valid within 10%, that the collisional component of the Ly-alpha is negligible, in typical coronal conditions. From the intensity and the polarization of the resonant components of these Lyman lines, the strength and direction of coronal fields can be determined. We model the sensitivity of Hanle-effect diagnostics for different coronal structures (e.g., coronal holes and loops).

Fineschi, S.↗