Search NASA⌕ Search

SEARCH · Search NASA

Results for “deconvolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Lithiation of Magnetite (Fe 3 O 4 ): Analysis Using Isothermal Microcalorimetry and Operando X-ray Absorption Spectroscopy

Conversion electrodes, such as magnetite (Fe 3 O 4 ), offer high theoretical capacities (>900 mAh/g) because of multiple electron transfer per metal center. Capacity retention for conversion electrodes has been a challenge in part because of the formation of an insulating surface electrolyte interphase (SEI). This paper provides the first detailed analysis of the lithiation of Fe 3 O 4 using isothermal microcalorimetry (IMC). The measured heat flow was compared with heat contributions predicted from heats of formation for the Faradaic reaction, cell polarization, and entropic contributions. The total measured energy output of the cell (7260 J/g Fe 3 O 4 ) exceeded the heat of reaction predicted for full lithiation of Fe 3 O 4 (5508 J/g). During initial lithiation (3.0–0.86 V), the heat flow was successfully modeled using polarization and entropic contributions. Heat flow at lower voltage (0.86–0.03 V) exceeded the predicted values for iron oxide reduction, consistent with heat generation attributable to electrolyte decomposition and surface electrolyte interphase (SEI). Operando X-ray absorption spectroscopy (XAS) indicated that the oxidation state of the Fe centers deviated from predicted values beginning at ~0.86 V, supportive of SEI onset in this voltage range. Finally and thus, these combined results from electrochemistry, IMC, and XAS indicate parasitic reactions consistent with SEI formation at a moderate voltage and illustrate an approach for deconvoluting Faradaic and non-Faradaic contributions to heat, which should be broadly applicable to the study of energy-storage materials and systems.

25 ENERGY STORAGE↗

Profiling of Histone Post-Translational Modifications in Mouse Brain with High-Resolution Top-Down Mass Spectrometry

Histones play central roles in most chromosomal functions and both their basic biology and roles in disease have been the subject of intense study. Since multiple PTMs along the entire protein sequence are potential regulators of histones, a top-down approach, where intact proteins are analyzed, is ultimately required for complete characterization of proteoforms. However, significant challenges remain for top-down histone analysis primarily because of deficiencies in separation/resolving power and effective identification algorithms. Here, we used state of the art mass spectrometry and a bioinformatics workflow for targeted data analysis and visualization. The workflow uses ProMex for intact mass deconvolution, MSPathFinder as search engine, and LcMsSpectator as a data visualization tool. ProMex sums across retention time to maximize sensitivity and accuracy for low abundance species in MS1deconvolution. MSPathFinder searches the MS2 data against protein sequence databases with user-defined modifications. LcMsSpectator presents the results from ProMex and MSPathFinder in a format that allows quick manual evaluation of critical attributes for high-confidence identifications. When complemented with the open-modification tool TopPIC, this workflow enabled identification of novel histone PTMs including tyrosine bromination on histone H4 and H2A, H3 glutathionylation, and mapping of conventional PTMs along the entire protein for many histone subunits.

Environmental Molecular Sciences Laboratory↗

Synthesis of CO 2 -Based Block Copolymers via Chain Transfer Polymerization Using Macroinitiators: Activity, Blocking Efficiency, and Nanostructure

Immortal copolymerization of epoxides/CO 2 using macro-chain-transfer agent (macro-CTA) is a useful method to prepare CO 2 -based block copolymers for manufacturing high value-added materials. Despite a variety of CO 2 -based block copolymers that have been reported using distinct macro-CTAs, issues including catalytic activity and blocking efficiency for the immortal polymerization remain superficially understood. Here, we systematically studied the reaction activity and blocking efficiency by using various macro-CTAs (including PPG, PEG, and PS) in the presence of two classical catalyst systems ((BDI)ZnOAc and SalenCoTFA/PPN-TFA). By analysis of the gel permeation chromatograms via mathematical deconvolution, it comes to a conclusion that the size, nature, and ratio of [macro-CTA]/[Cat.] strongly influence the catalytic activity of the reaction and blocking efficiency for the resultant block copolymers. As a result, thin film self-assembly of PS/PPC block copolymers was investigated, and the results were analyzed by SEM to ascertain the impact of blocking efficiency on nanoassembly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonaggregating Doped Polymers Based on Poly(3,4-Propylenedioxythiophene)

Electrical doping of organic semiconductors is critical for their use in electrical devices. However, many high-performance semiconductors exhibit drastically reduced solubilities when doped in solution, making it difficult to deconvolute the roles of doping and morphological changes on their electrical properties. We report the synthesis of a semiconducting polymer based on poly(3,4-propylenedioxythiophene) (ProDOT) substituted with oligo(ethylene glycol) (EG) side chains that is designed to solvate dopant molecules. When doped with F 4 TCNQ in solution, the polymer P(ProDOT-EG) undergoes efficient charge transfer while remaining soluble with no indication of aggregation. The electrical conductivity of thin films cast from heavily doped solutions is ~1 S/cm; optical spectroscopy reveals that the doping efficiency is reduced upon formation of the solid film. Diffusion of F 4 TCNQ from the vapor phase into films of neutral P(ProDOT-EG) yields comparable conductivities to films cast from doped solutions. Absorption spectroscopy and X-ray diffraction of doped films reveal that the doping efficiency and nature of charge carriers (polaron or bipolaron) are strongly affected by the processing route. The lack of the localized polaron signature for films doped by infiltration of the dopant from the vapor phase indicates that morphology has a large role in determining the nature of the charge carriers in semiconducting polymers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Constraining Data Mining with Physical Models: Voltage- and Oxygen Pressure-Dependent Transport in Multiferroic Nanostructures

Development of new generation electronic devices requires understanding and controlling the electronic transport in ferroic, magnetic, and optical materials, which is hampered by two factors. First, the complications of working at the nanoscale, where interfaces, grain boundaries, defects, and so forth, dictate the macroscopic characteristics. Second, the convolution of the response signals stemming from the fact that several physical processes may be activated simultaneously. Here, we present a method of solving these challenges via a combination of atomic force microscopy and data mining analysis techniques. Rational selection of the latter allows application of physical constraints and enables direct interpretation of the statistically significant behaviors in the framework of the chosen physical model, thus distilling physical meaning out of raw data. We demonstrate our approach with an example of deconvolution of complex transport behavior in a bismuth ferrite–cobalt ferrite nanocomposite in ambient and ultrahigh vacuum environments. Measured signal is apportioned into four electronic transport patterns, showing different dependence on partial oxygen and water vapor pressure. These patterns are described in terms of Ohmic conductance and Schottky emission models in the light of surface electrochemistry. Finally and furthermore, deep data analysis allows extraction of local dopant concentrations and barrier heights empowering our understanding of the underlying dynamic mechanisms of resistive switching.

36 MATERIALS SCIENCE↗

Atom Identification in Bilayer Moiré Materials with Gomb-Net

Moiré patterns in van der Waals bilayer materials complicate the analysis of atomic-resolution images, hindering the atomic-scale insight typically attainable with scanning transmission electron microscopy. Here, we report a method to detect the positions and identities of atoms in each of the individual layers that compose twisted bilayer heterostructures. We developed a deep learning model, Gomb-Net, which identifies the coordinates and atomic species in each layer, deconvoluting the moiré pattern. This enables layer-specific mapping of atomic positions and dopant distributions, unlike other commonly used segmentation models which struggle with moiré-induced complexity. Using this approach, we explored the Se atom substitutional site distribution in a twisted fractional Janus WS 2 -WS 2(1–x) Se 2x heterostructure and found that layer-specific implantation sites are unaffected by the moiré pattern’s local energetic or electronic modulation. In conclusion, this advancement enables atom identification within material regimes where it was not possible before, opening new insights into previously inaccessible material physics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultrafast Dynamics of Excitonic Complexes in Electrolyte-Gated Monolayer MoS 2

Understanding and controlling ultrafast excitons and trion dynamics in monolayer transition metal dichalcogenides (TMDs) is critical for optoelectronic and photonic applications. These dynamics depend strongly on carrier density, but most studies use fluence-dependence to modulate electron-hole populations rather than direct electrostatic gating that is more relevant to optoelectronic devices. We utilize electrolyte gating to tune the ground-state carrier density of monolayer MoS 2 and probe excitonic dynamics using transient absorption spectroscopy, thereby modifying absorption through bandgap renormalization, screening, phase-space filling, and exciton-trion crossover. Spectral deconvolution reveals distinct but coupled exciton and trion dynamics. Excitons form independently of voltage but relax faster with increasing carrier density, consistent with Auger-like processes, while trions decay more rapidly through multiple channels. At higher voltages, trion relaxation shifts from a sub-picosecond cooling to slower trapping-assisted processes. Furthermore, our results provide missing insights into the interplay between excitons and trions in monolayer MoS 2 , relevant for TMD-based optoelectronics.

chalcogenides↗

Probing the Atomic-Scale Structure of Amorphous Aluminum Oxide Grown by Atomic Layer Deposition

Atomic layer deposition (ALD) is a well-established technique for depositing nanoscale coatings with pristine control of film thickness and composition. The trimethylaluminum (TMA) and water (H 2 O) ALD chemistry is inarguably the most widely used and yet to date, we have little information about the atomic-scale structure of the amorphous aluminum oxide (AlO x ) formed by this chemistry. This lack of understanding hinders our ability to establish process-structure-property relationships and ultimately limits technological advancements employing AlOx made via ALD. In this work, we employ synchrotron high-energy X-ray diffraction (HE-XRD) coupled with pair distribution function (PDF) analysis to characterize the atomic structure of amorphous AlO x ALD coatings. We combine ex situ and in operando HE-XRD measurements on ALD AlO x and fit these experimental data using stochastic structural modeling to reveal variations in the Al-O bond length, Al and O coordination environment, and extent of Al vacancies as a function of growth conditions. In particular, the local atomic structure of ALD AlO x is found to change with the substrate and number of ALD cycles. The observed trends are consistent with the formation of bulk Al 2 O 3 surrounded by an O-rich surface layer. We deconvolute these data to reveal atomic-scale structural information for both the bulk and surface phases. Overall, this work demonstrates the usefulness of HE-XRD and PDF analysis in improving our understanding of the structure of amorphous ALD thin films and provides a pathway to evaluate how process changes impact the structure and properties of ALD films.

36 MATERIALS SCIENCE↗

Nonpassivated Silicon Anode Surface

A stable solid electrolyte interphase (SEI) has been proven to be a key enabler to most advanced battery chemistries, where the reactivity between the electrolyte and the anode operating beyond the electrolyte stability limits must be kinetically suppressed by such SEIs. The graphite anode used in state-of-the-art Li-ion batteries presents the most representative SEI example. Because of similar operation potentials between graphite and silicon (Si), a similar passivation mechanism has been thought to apply on the Si anode when using the same carbonate-based electrolytes. Herein, we found that the chemical formation process of a proto-SEI on Si is closely entangled with incessant SEI decomposition, detachment, and reparation, which lead to continuous lithium consumption. Using a special galvanostatic protocol designed to observe the SEI formation prior to Si lithiation, we were able to deconvolute the electrochemical formation of such dynamic SEI from the morphology and mechanical complexities of Si and showed that a pristine Si anode could not be fully passivated in carbonate-based electrolytes.

25 ENERGY STORAGE↗

Probing the Reactivity of the Active Material of a Li-Ion Silicon Anode with Common Battery Solvents

Calculations and modeling have shown that replacing the traditional graphite anode with silicon can greatly improve the energy density of lithium-ion batteries. However, the large volume change of silicon particles and high reactivity of lithiated silicon when in contact with the electrolyte lead to rapid capacity fading during charging/discharging processes. In this report, we use specific lithium silicides (LS) as model compounds to systematically study the reaction between lithiated Si and different electrolyte solvents, which provides a powerful platform to deconvolute and evaluate the degradation of various organic solvents in contact with the active lithiated Si-electrode surface after lithiation. Nuclear Magnetic Resonance (NMR) characterization results show that a cyclic carbonate such as ethylene carbonate is chemically less stable than a linear carbonate such as ethylmethyl carbonate, fluoroethylene carbonate, and triglyme as they are found to be more stable when mixed with LS model compounds. Furthermore, guided by the experimental results, two ethylene carbonate (EC)-free electrolytes are studied, and the electrochemical results show improvements with graphite-free Si electrodes relative to the traditional ethylene-carbonate-based electrolytes. More importantly, the study contributes to our understanding of the significant fundamental chemical and electrochemical stability differences between silicon and traditional graphite lithium-ion battery (LIB) anodes and suggests a focused development of electrolytes with specific chemical stability vs lithiated silicon which can passivate the surface more effectively.

25 ENERGY STORAGE↗

Chemical Interplay of Silicon and Graphite in a Composite Electrode in SEI Formation

In this study, we investigated the effect of the Si/graphite weight ratio in half-cells on the solid electrolyte interphase (SEI) layer's chemistry. The nominal concentrations of active materials were (wt % Si/wt % Gr) 15/73, 30/58, 60/28, and 80/0. The electrolyte in the cells consisted of either 1.2 M LiPF 6 in ethylene carbonate/ethyl methyl carbonate (3:7 by wt) or 1.2 M LiPF 6 in ethylene carbonate:ethyl methyl carbonate (3:7 by wt) + 10 wt % fluoroethylene carbonate. These coin cells were cycled five times at the C/10 rate. As expected, the addition of silicon to the electrode significantly increased the measured capacity. Examination of the aged composite material showed that the electrolyte influenced the concentration of chemical environments on the surface. Depth profiling revealed that these concentrations of surface environments changed with sputtering time. A statistics-of-mixtures model was used to deconvolute how silicon and graphite interacted during the formation of these species and how the interaction changed with depth.

25 ENERGY STORAGE↗

Understanding the Electrochemical Performance of FeS 2 Conversion Cathodes

Conversion cathodes represent a viable route to improve rechargeable Li + battery energy densities, but their poor electrochemical stability and power density have impeded their practical implementation. Here, we explore the impact cell fabrication, electrolyte interaction, and current density have on the electrochemical performance of FeS 2 /Li cells by deconvoluting the contributions of the various conversion and intercalation reactions to the overall capacity. By varying the slurry composition and applied pressure, we determine that the capacity loss is primarily due to the large volume changes during (de)lithiation, leading to a degradation of the conductive matrix. Through the application of an external pressure, the loss is minimized by maintaining the conductive matrix. Further, we determine that polysulfide loss can be minimized by increasing the current density (>C/10), thus reducing the sulfur formation period. Analysis of the kinetics determines that the conversion reactions are rate-limiting, specifically the formation of metallic iron at rates above C/8. While focused on FeS 2 , our findings on the influence of pressure, electrolyte interaction, and kinetics are broadly applicable to other conversion cathode systems.

Pressure↗

Enhanced Interfacial Bonding of Graft Copolymers

To understand how thermoplastic welding strength can be tuned through chemical modifications and macromolecular topology, we combined coarse-grained molecular dynamics (MD) simulations with experimental validation. Our simulations examined the diffusion dynamics of both linear and graft polymers across representative interfaces, revealing that diffusion-controlled interdigitation follows a power law, with the exponent decreasing from 0.34 to 0.11 as grafting density increases from 7.5 to 196% (with side chains grafted to both sides of a monomer unit). The addition of side chains enhances welding efficiency, as dense bottlebrush polymers with high grafting density reach maximum rupture strength faster than linear polymers. However, their saturated rupture strength is lower. This observation is subsequently corroborated by experimental lap-shear tests comparing linear polyethylene with octene grafted polyethylene elastomers. Our MD simulations show that unlike linear polymers, where backbone entanglements dominate, the grafted side chains introduce mechanisms in addition to entanglement dilution. The rapid interdigitation of side chains creates a dense mesh of entropic van der Waals contacts, which can also enhance the film welding. Furthermore, our MD simulations reveal a brittle rupture behavior in linear and comb-like (mildly grafted) polymers, while bottlebrush (densely grafted) polymers display elastomeric behavior with a pronounced stress plateau prior to fracture. Our simulations deconvolute the influence of polymer topology on deformation behavior. The rate of polymer deformation becomes lower than the applied strain rate prior to rupture, and the onset of this deviation is progressively delayed from linear to bottlebrush polymers. This trend highlights the critical role of molecular architecture in governing the mechanical response. In conclusion, these results provide deeper insight into the underlying welding mechanisms of topological polymers and present a potential approach for mitigating the interface anisotropy that is inherent in advanced manufacturing techniques such as fused filament fabrication.

graft copolymers↗

Morphology and Transport of Multivalent Cation-Exchanged Ionomer Membranes Using Perfluorosulfonic Acid–Ce Z+ as a Model System

Perfluorosulfonic acids (PFSAs) are commonly used as solid polymer electrolyte membranes (PEMs) in electrochemical energy devices, where they are vulnerable to attack by radical species during operation. A popular strategy to combat this problem is to introduce radical scavengers like cerium (Ce) ions that neutralize these species before they attack the PFSA. Such cation doping creates a multi-ion system, in which understanding the mechanisms of cation solvation and transport becomes important for the effective design and utilization of PFSA–cation systems. Ce ions also provide a representative model system for multication-exchanged ionomers in electrochemical systems. In this study, hydration and conductivity measurements, along with X-ray fluorescence and scattering, are employed to elucidate how Ce ion exchange alters PFSA’s ionic solvation, as well as nano- and mesoscale morphologies, which ultimately control its ion transport properties. A molecular transport model is used to deconvolute the impact of Ce ions on the local solvation structure of water in the membrane from mesoscale changes of the transport pathways. The combined experimental and theoretical analysis reveals a nonlinear decrease in conductivity driven by cation solvation at the molecular level and morphological changes at longer length scales. Migration–diffusion coupling, its nonlinear dependence on ion exchange and hydration, and its overall implications for ionomer performance are also discussed. Finally, these findings have the potential to be translated into other mixed cation–ionomer systems for a wide range of energy and environmental devices.

36 MATERIALS SCIENCE↗

Influence of the Molecular Structure on the Electrocatalytic Hydrogenation of Carbonyl Groups and H 2 Evolution on Pd

We investigated the electrocatalytic hydrogenation (ECH) of model aldehydes and ketones over carbon supported Pd in aqueous phase. We propose reaction mechanisms based on kinetic measurements and on spectroscopic and electrochemical characterization of the working catalyst. The reaction rates of ECH and of the H 2 evolution reaction (HER) vary with the applied electric potential following trends that strongly depend on the organic substrate. The intrinsic rates of hydrogenation and H 2 evolution are influenced, in opposing ways, by the sorption of the reacting organic substrate. Strong interactions, i.e., higher standard free energies of adsorption of the organic compound, induce high hydrogenation rates but decrease the overall currents. The fast hydrogenation kinetics produces a hydrogen-depleted environment that kinetically hinders the HER and the bulk phase transition of Pd to a H-rich bulk Pd hydride, which is triggered by the applied potential in the absence of reacting organic compounds. As consequence of strong organic-metal interactions, hydrogenation dominates at low overpotential. However, the coverages of organic substrates on the metal surface decrease and the rates of H 2 evolution surpass those of hydrogenation with increasingly negative electric potential. We determined the range of electric potential favoring hydrogenation on Pd and quantitatively deconvoluted the effects of the sorption of the organic compound, and of the rates of proton coupled electron transfers, on the kinetics of both ECH and HER. The results indicate that electrocatalysis offers hydrogenation pathways for polar molecules that are different and, in some cases, faster than those dominating in the absence of an external electric potential.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metal Identity and Coordination Environment Modulate Single-Atom Catalyst Stability During Electrocatalysis

A major hurdle to the implementation of single-atom catalysts (SACs) in real-world systems is a poor understanding of their stability under operating conditions, which is particularly relevant due to the high surface free energy of SACs. Here, we evaluated the aggregation behavior of a suite of SACs varied by metal identity (Fe, Co, Ni, and Cu) during electrocatalytic nitrate reduction using in situ X-ray absorption spectroscopy. The metal center had significant influence on reconstruction, where under identical applied reductive potentials, SACs underwent varying levels of reconstruction, ranging from no discernible change to complete reduction into metallic nanoparticles. Such in situ experiments revealed Cu SACs to be the most susceptible to aggregation, prompting a deeper investigation into how coordination environment (O-, B-, and N-graphene) affected Cu SAC aggregation. We further conducted density functional theory calculations to elucidate the relationship between Cu SAC structure and stability. This work deconvolutes the relationship between SAC architecture and stability, which is essential to evaluate and explain for the realization of SACs for electrocatalysis.

36 MATERIALS SCIENCE↗

Cobalt Oxide on N-Doped Carbon for 1-Butene Oligomerization to Produce Linear Octenes

Cobalt oxide supported on N-doped carbon catalysts were investigated for 1-butene oligomerization. The materials were synthesized by treating activated carbon with nitric acid and subsequently with NH3 at 200, 400, 600, and 800 °C, followed by impregnation with cobalt. The 1-butene oligomerization selectivity increased with ammonia treatment temperature of the carbon support. The oligomerization selectivity of cobalt oxide on N-doped carbon synthesized at 800 °C (800A-CoOx/N-C) is 2.6 times higher than previously reported cobalt oxide on N-doped carbon synthesized with NH 4 OH (2A-CoOx/N-C). Over 70% of the butene dimers were linear C8 olefins for all catalysts. The oligomerization selectivity increased with 1-butene conversion. The catalysts were characterized by elemental analysis, N2 adsorption, X-ray diffraction (XRD), X-ray absorption spectroscopy (XAS), and X-ray photoelectron spectroscopy (XPS). The nitrogen content of the catalysts increases with ammonia treatment temperature as confirmed by elemental analysis. The surface content of pyridinic nitrogen with a binding energy of 398.4 ± 0.1 eV increased with ammonia treatment temperature as evidenced by deconvolution of N 1s XPS spectra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Robust, Scalable Platform for the Electrochemical Conversion of CO 2 to Formate: Identifying Pathways to Higher Energy Efficiencies

This work demonstrated a robust, scalable cell architecture for electroreduction of CO 2 (CO 2 R). An up to 90% faradaic efficiency for the conversion of CO 2 R to formate at 500 mA/cm 2 was realized at a 25 cm2 gas diffusion electrode (GDE) with a carbon-supported SnO 2 electrocatalyst. Furthermore, a 1.27 mm thick catholyte was used between the bipolar membrane and cathode GDE, which could be further reduced to tens of micrometers upon refinement. The deconvolution of the potential drop from each individual component/process guides the pathways to higher energy efficiencies of CO 2 R at this platform. Significant changes in the agglomerate size and aspect ratio on the electrode before and after an 11 h test were revealed by nano-CT, suggesting reduced CO 2 accessibility from electrode degradation. The versatility of this CO 2 R testing platform enables the ability to assess materials, components, and interactions at scales more in line with future devices.

30 DIRECT ENERGY CONVERSION↗