Search NASA⌕ Search

SEARCH · Search NASA

Results for “discrete surface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Preliminary Scale-Resolving Simulations of Laminar-To-Turbulent Transition in Swept-Wing Flow

Swept wings and control surfaces are common elements of modern aircraft, and it has been shown both experimentally and theoretically that laminar-to-turbulent transition of the three-dimensional boundary layer that develops over them is highly sensitive to surface roughness. Numerous studies have been conducted on the effect of discrete roughness elements or distributed roughness elements on swept flow transition, however so far limited computational effort has been dedicated to the study of transition over swept wings with randomly distributed micron-sized roughness. In the present work, we set up to reproduce the extensive experimental data base generated by Dagenhart et al for the infinite swept wing NLF(2)-0415. To this purpose, we perform scale-resolving simulations of flow transition over smooth and rough surfaces using a high-order space-time spectral-element Discontinuous-Galerkin solver. Different types of surface roughnesses are implemented by elastically deforming the original mesh. The study shows that the experimental results cannot be accounted for by a perfectly smooth wing and reveals a strong sensitivity of the transition process to the representation of the surface roughness. The crossflow patterns and transition location approach those measured for some of the surface profiles, however a correlation between the wavenumber spectrum of the surface, grid resolution and boundary layer stability is yet to be established.

Denison, Marie↗
NASA NTRSDate not supplied

Economical Third-Order Methods for Accurate Surface Heating Predictions on Simplex Element Meshes

A node-centered edge-based finite volume discretization of the compressible Navier-Stokes equations is presented with the heat flux reformulated as a first order system. A dissipation vector is derived for the reformulated system, such that the heat flux can be upgraded to O(h^3) on simplex element meshes in the same fashion as the inviscid fluxes. The method of manufactured solutions is used to demonstrate this uniform order property in heat flux. This new system is shown to efficiently produce accurate surface heating predictions on hypersonic hemisphere flow using an anisotropic simplex element mesh, achieving O(h^3) accuracy at relatively low computational cost compared to similar methods.

Computational Fluid Dynamics↗
NASA NTRS1993

Radiative transfer for a three-dimensional raining cloud

Satellite-sensor-based microwave brightness temperatures for a three-dimensional raining cloud over a reflecting surface are computed by using a radiative transfer model based on the discrete-ordinates solution procedure. The three-dimensional model applied to a plane layer is validated by comparison with results from a one-dimensional model that is available in the literature. Results examining the effects of cloud height, rainfall rate, surface reflectance, rainfall footprint area, and satellite viewing position on one- and three-dimensional brightness temperature calculations are reported. The numerical experiments indicate that, under certain conditions, three-dimensional effects are significant in the analysis of satellite-sensor-based rainfall retrieval algorithms. The results point to the need to consider carefully three-dimensional effects as well as surface reflectance effects when interpreting satellite-measured radiation data.

Haferman, J. L.↗
NASA NTRS2021

Digital Elevation Models: Terminology and Definitions

Abstract:Digital elevation models (DEMs) provide fundamental depictions of the three-dimensionalshape of the Earth’s surface and are useful to a wide range of disciplines. Ideally, DEMs record theinterface between the atmosphere and the lithosphere using a discrete two-dimensional grid, withcomplexities introduced by the intervening hydrosphere, cryosphere, biosphere, and anthroposphere.The treatment of DEM surfaces, affected by these intervening spheres, depends on their intendeduse, and the characteristics of the sensors that were used to create them. DEM is a general term,and more specific terms such as digital surface model (DSM) or digital terrain model (DTM) recordthe treatment of the intermediate surfaces. Several global DEMs generated with optical (visible andnear-infrared) sensors and synthetic aperture radar (SAR), as well as single/multi-beam sonars andproducts of satellite altimetry, share the common characteristic of a georectified, gridded storagestructure. Nevertheless, not all DEMs share the same vertical datum, not all use the same conventionfor the area on the ground represented by each pixel in the DEM, and some of them have variable dataspacings depending on the latitude. This paper highlights the importance of knowing, understandingand reflecting on the sensor and DEM characteristics and consolidates terminology and definitions ofkey concepts to facilitate a common understanding among the growing community of DEM users,who do not necessarily share the same background

Peter L Guth↗
DOE OSTI2022

High-Silicon Steel Strip by Single-Step Shear Deformation Processing

It is well known that Fe-Si alloys with Si content higher than in conventional electrical sheet steels (>3.2% Si) can make a significant impact in improving the efficiency of electrical motors if they are available in sheet/foil (strip) forms at suitable cost. While the magnetic and electrical attributes (e.g., resistivity, core loss) of these high-Si Fe alloys, of relevance to electrical motor core laminations, are known to be exceptional, the alloys have limited workability, making them difficult to produce consistently in sheet/foil (strip) forms. Current processing techniques such as rolling, while adequate for producing conventional electrical steel sheet, do have important disadvantages - large energy consumption and emissions, limitations in processing of low-workability alloys (e.g., high-Si content steels), large-scale plant infrastructure, and less than adequate capability to engineer sheet metals with specific microstructures (e.g., fine-grained) and crystallographic textures (e.g., shear textures). It is therefore of interest to have an alternative commercial process that can produce sheet/foil (strip) from high-Si Fe alloys and which can also overcome some of the deficiencies of current multistage strip processes. The goal of the present project was design and demonstration of a new energy-efficient pilot process for producing high-Si electrical steel strip of commercial widths and thickness, and with superior electrical and magnetic properties than current electrical steels (Fe-3.2% Si as benchmark). The applications domain for these steels is electrical motor core laminations. We have addressed this goal by accomplishment of the following specific objectives and tasks: a) Development of an Fe-4Si-4Cr alloy with electrical resistivity >80 μΩ-cm, induction flux density >1.48 T at 5000 A/m and core loss 35% lower than the benchmark 3.2% Si alloy. The alloy which meets DOE target specifications for motor core attributes was designed with the Si content controlled for the electrical properties and the Cr content tailored to meet material/process workability requirements. b) A unique machining-based deformation processing system was designed and scaled-up to produce strip of commercial width (25 mm to 150 mm) and thickness (up to 0.5 mm) from the Fe-4Si-4Cr alloy and other alloys of varied workability including copper, Al6061-T6 and naval brass. The key attributes of the machining-based strip production are deformation processing by concentrated simple-shear; single-step production of strip from ingot using compact machine infrastructure; strip surface finish of Ra 0.35 to 1 micrometer that is comparable/superior to that of rolled strip; discrete production of strip that can potentially be done at point of use; and controllability of strip mechanical/formability properties by deformation control. c) The electrical, magnetic, surface quality, mechanical, formability, and metallurgical properties/attributes of the machining-based strip were established by direct ASTM standard or equivalent measurement techniques. d) Punching characteristics of the strip in terms of load, edge quality and macro defects were similar to those of conventional 3.2% Si electrical steels. These punching characteristics are critical from a manufacturability perspective for motor/transformer core applications. e) A modeling framework for energy analysis of multistage rolling and the machining-based deformation processing has been established. Application of this modeling to the two strip-processes showed that the machining-based process requires significantly lower specific energy for processing, ~ 25% of that for rolling. The modeling framework can be adapted for a range of sheet-metal forming, bulk metal forming, and machining processes. It can be used to identify key parameters controlling process specific energy. f) A comparative analysis of advantages and disadvantages of machining-based processing against rolling for strip production. The single stage machining-based processing, with compact infrastructure, represents a new manufacturing paradigm for sheet and foil manufacturing that can potentially also be applied to advanced titanium, aluminum, copper and magnesium alloys. The goals and objectives were accomplished by a cross-disciplinary project team comprising of personnel from Purdue University; M4 Sciences LLC, a small-business focused on advanced manufacturing technology development; the Pacific Northwest National Labs; and tool manufacturers. The team is currently in advanced discussions with multiple entities for future process development for commercialization.

36 MATERIALS SCIENCE↗
NASA NTRSDate not supplied

Thermal Band Observations of the May 2022 Total Lunar Eclipse by the Landsat Thermal Infrared Sensors

The Thermal Infrared Sensor (TIRS) instruments on board Landsat 8 and Landsat 9 provide routine thermal band image measurements of the Earth for the Landsat program. Although these observatories are specifically designed for mapping the Earth’s surface from their 705-km altitude orbits, they were recently utilized to image the Moon during the total lunar eclipse of May 2022. The full Moon is frequently used as a calibration target for Landsat. However, the imaging of the lunar eclipse provided a unique opportunity to gather accurate temporal thermal band data over the full lunar disc as solar illumination is removed. This campaign required a large effort by the Landsat Flight Operations teams to coordinate acquisitions and technical constraints on both observatories to capture the long temporal extent of the eclipse. The result of this effort was a series of resolved thermal images of the Moon at discrete times as the Earth’s shadow swept across the lunar surface through the start, partial, and total phases of the eclipse. This sequence of images showed an overall drop in surface temperature from approximately 370 K to 180 K in about 300 minutes as solar insolation was removed. Furthermore, the spatial distribution of cooling rates from this unique event provided information about different material properties (density and thermal inertia) across the lunar surface and showed a clear distinction among mare, highlands, and impact craters.

Matthew Montanaro↗
NASA NTRS1972

Electrostatic-probe measurements of plasma parameters for two reentry flight experiments at 25000 feet per second

Unique plasma diagnostic measurements at high altitudes from two geometrically similar blunt body reentry spacecraft using electrostatic probe rakes are presented. The probes measured the positive ion density profiles (shape and magnitude) during the two flights. The probe measurements were made at eight discrete points (1 cm to 7 cm) from the vehicle surface in the aft flow field of the spacecraft over the altitude range of 85.3 to 53.3 km (280,000 to 175,000 ft) with measured densities of 10 to the 8th power to 10 to the 12th power electrons/cu cm, respectively. Maximum reentry velocity for each spacecraft was approximately 7620 meters/second (25,000 ft/sec). In the first flight experiment, water was periodically injected into a flow field which was contaminated by ablation products from the spacecraft nose region. The nonablative nose of the second spacecraft thereby minimized flow field contamination. Comparisons of the probe measured density profiles with theoretical calculations are presented with discussion as to the probable cause of significant disagreement. Also discussed are the correlation of probe measurements with vehicle angle of attack motions and the good high altitude agreement between electron densities inferred from the probe measurements, VHF antenna measurements, and microwave reflectometer diagnostic measurements.

Jones, W. L., Jr.↗
NASA NTRS1972

Space shuttle ascent flight turbulence response

A totally reusable space shuttle configuration has been analyzed during ascent flight to determine its response to atmospheric turbulence. Responses in the form of booster and orbiter body accelerations and booster wing root shear, bending moment and turque were obtained due to random and quasi-square-wave discrete turbulence. The configuration was also analyzed with booster aerodynamic surfaces removed to simulate an expendable booster. Symmetric and antisymmetric analyses were performed. Propellant sloshing, gust penetration, and automatic control system effects were included. It was found that the symmetric responses were generally higher than the antisymmetric ones. The stability augmentation system tended to lower the booster accelerations in the symmetric case, while increasing the orbiter accelerations.

Source record↗
NASA NTRS1976

Extended applications of the vortex lattice method

The application of the vortex lattice method to problems not usually dealt with by this technique is considered. It is shown that if the discrete vortex lattice is considered as an approximation to surface-distributed vorticity, then the concept of the generalized principal part of an integral yields a residual term to the vortex-induced velocity that renders the vortex lattice method valid for supersonic flow. Special schemes for simulating non-zero thickness lifting surfaces and fusiform bodies with vortex lattice elements are presented. Thickness effects of wing-like components are simulated by a double vortex lattice layer, and fusiform bodies are represented by a vortex grid arranged on a series of concentric cylindrical surfaces. Numerical considerations peculiar to the application of these techniques are briefly discussed.

Miranda, L. R.↗
NASA NTRS1978

A semiclassical approach to collisional ionization with application to the Ar-He system

A semiclassical approach based on the propagation of classical trajectories on potential surfaces analytically continued into the complex plane, together with a discretization procedure, has been developed for the problem of collisional ionization. Based on Franck-Condon considerations the formalism is reduced to that of the two-state approximation. Preionization loss and tunnelling beyond turning points have not been considered. Calculated partial ionization cross sections for the Ar-He system show good agreement with a fully quantum mechanical treatment.

Lam, K.-S.↗
NASA NTRS1979

Utility of a finite element solution algorithm for initial-value problems

The Galerkin criterion within a finite element Weighted Residuals formulation is employed to establish an implicit solution algorithm for an initial-value partial differential equation. Numerical solutions of a transient parabolic and a hyperbolic equation, obtained using linear, quadratic and two cubic finite element basis functions, are employed to quantize accuracy and confirm and refine theoretical convergence rate estimates. The linear basis algorithm for the hyperbolic equation displays excellent accuracy on a coarse computational grid and a high-order convergence rate with discretization refinement. Good accuracy and a strong convergence rate in surface flux are determined for a nonhomogeneous Neumann boundary constraint applied to a parabolic equation. The results amply demonstrate the impact of the nondiagonal finite element initial-value matrix structure on solution accuracy and/or convergence rate.

Baker, A. J.↗
NASA NTRS1982

Generalized Roche potential for misaligned binary systems - Properties of the critical lobe

The paper considers the Roche potential for binary systems where the stellar rotation axis is not aligned with the orbital revolution axis. It is shown that, as the degree of misalignment varies, internal Lagrangian points and external Lagrangian points may switch their roles. A systematic method to identify the internal Lagrangian point and to calculate the volume of the critical lobe is developed, and numerical results for a wide range of parameters of binary systems with circular orbits are presented. For binary systems with large enough misalignment, discrete changes occur in the topological structure of the equipotential surfaces as the orbital phase varies. The volume of the critical lobe has minima, as a function of orbital phase, at the two instances when the secondary crosses the equatorial plane of the primary. In semidetached systems, mass transfer may be confined to the vicinity of these two instances.

Avni, Y.↗
NASA NTRS1991

Fundamental and practical limitations of FUV/EUV photon-counting image detectors

In EUV and FUV space-astronomy applications, the best contemporary detector designs are based on the use of microchannel plates due to their ability to deliver photon-counting performance with high efficiency. The major unresolved issue is the choice of position-readout system for the individual photoevents. Electrical event-readout systems are divided into two classes: the discrete wire anodes that perform coordinate digitization by wire-group selection, and the continuous centroid-position encoders for which coordinates are digitized in the associated electronics. The centroid-position encoder techniques are discussed in terms of how they overcome the four chief limitations of the discrete-wire readouts - their limited format size, their flat focal surface, their fundamental hex-channel vs squared-pixel moire pattern, and their image undersampling. With these limitations overcome, microchannel based image systems can deliver the performance demanded by the forthcoming generation of applications in space astronomy.

Lampton, M.↗
NASA NTRS1992

A deep image of the diffuse soft X-ray background at the Galactic plane

A deep Einstein IPC image of the Galactic plane provides important information about the Galactic diffuse X-ray background. Free from contamination by sources with fluxes greater than about 4 x 10 exp -14 ergs/sq cm s and by X-rays from beyond the Galactic plane, the intensity and spectrum of the background at the Galactic plane are measured for the first time in the 0.16-3.5 keV band. The spectrum can be characterized by a thermal hot gas model with a temperature of about 4,000,000 K, and the M-band Galactic flux is about 3 x 10 exp -8 ergs/sq cm s sr. This background is enhanced in the M band at the Galactic plane, but it is keV regime. If discrete sources are to be responsible for the background, their surface density must be much greater than one source per resolution element of the IPC (i.e., about 0.4 sources/sq arcmin) because of the lack of a correlation among observed X-ray on scales comparable to the instrument resolution. This density constraint, together with a model study of the Galactic emission, leads to the conclusion that no known stellar population could be responsible for the bulk of the emission.

Wang, Qingde↗
NASA NTRS1996

Adaptive grid methods for RLV environment assessment and nozzle analysis

Rapid access to highly accurate data about complex configurations is needed for multi-disciplinary optimization and design. In order to efficiently meet these requirements a closer coupling between the analysis algorithms and the discretization process is needed. In some cases, such as free surface, temporally varying geometries, and fluid structure interaction, the need is unavoidable. In other cases the need is to rapidly generate and modify high quality grids. Techniques such as unstructured and/or solution-adaptive methods can be used to speed the grid generation process and to automatically cluster mesh points in regions of interest. Global features of the flow can be significantly affected by isolated regions of inadequately resolved flow. These regions may not exhibit high gradients and can be difficult to detect. Thus excessive resolution in certain regions does not necessarily increase the accuracy of the overall solution. Several approaches have been employed for both structured and unstructured grid adaption. The most widely used involve grid point redistribution, local grid point enrichment/derefinement or local modification of the actual flow solver. However, the success of any one of these methods ultimately depends on the feature detection algorithm used to determine solution domain regions which require a fine mesh for their accurate representation. Typically, weight functions are constructed to mimic the local truncation error and may require substantial user input. Most problems of engineering interest involve multi-block grids and widely disparate length scales. Hence, it is desirable that the adaptive grid feature detection algorithm be developed to recognize flow structures of different type as well as differing intensity, and adequately address scaling and normalization across blocks. These weight functions can then be used to construct blending functions for algebraic redistribution, interpolation functions for unstructured grid generation, forcing functions to attract/repel points in an elliptic system, or to trigger local refinement, based upon application of an equidistribution principle. The popularity of solution-adaptive techniques is growing in tandem with unstructured methods. The difficultly of precisely controlling mesh densities and orientations with current unstructured grid generation systems has driven the use of solution-adaptive meshing. Use of derivatives of density or pressure are widely used for construction of such weight functions, and have been proven very successful for inviscid flows with shocks. However, less success has been realized for flowfields with viscous layers, vortices or shocks of disparate strength. It is difficult to maintain the appropriate mesh point spacing in the various regions which require a fine spacing for adequate resolution. Mesh points often migrate from important regions due to refinement of dominant features. An example of this is the well know tendency of adaptive methods to increase the resolution of shocks in the flowfield around airfoils, but in the incorrect location due to inadequate resolution of the stagnation region. This problem has been the motivation for this research.

Thornburg, Hugh J.↗
NASA NTRS2001

Efficient Cache use for Stencil Operations on Structured Discretization Grids

We derive tight bounds on the cache misses for evaluation of explicit stencil operators on structured grids. Our lower bound is based on the isoperimetrical property of the discrete octahedron. Our upper bound is based on a good surface to volume ratio of a parallelepiped spanned by a reduced basis of the interference lattice of a grid. Measurements show that our algorithm typically reduces the number of cache misses by a factor of three, relative to a compiler optimized code. We show that stencil calculations on grids whose interference lattice have a short vector feature abnormally high numbers of cache misses. We call such grids unfavorable and suggest to avoid these in computations by appropriate padding. By direct measurements on a MIPS R10000 processor we show a good correlation between abnormally high numbers of cache misses and unfavorable three-dimensional grids.

Frumkin, Michael↗
NASA NTRS2024

Real-Time Temperature Field State Observer and Digital Replica to Support Cyber-Physical Testing

Cyber-physical testing is a class of experimental methods in which a system is partitioned into physical and numerical components to study its overall behavior. Transfer systems are typically needed to capture relevant interactions by enforcing appropriate interface conditions between the physical and numerical portions. While cyber-physical testing is often performed using lumped-parameter systems, thermomechanical cyber-physical testing requires the use of thermal actuators as transfer systems to apply a thermal condition over a spatially distributed region or surface. Thus, the interactions between the numerical and physical components are of a distributed nature, i.e., a field rather than point values. In this paper, we develop and experimentally validate a state observer for temperature fields to enable thermomechanical cyber-physical testing. The state observer provides continuous estimates of temperature over a surface of the thermal actuator using only temperature measurements at discrete locations. The estimated temperature field is then leveraged to account for localized mechanical defects in the interface condition. The method consists of building a digital replica of one portion of the control plant. By imposing defects in the digital replica it is used to generate and output the response of a thermal load pattern that represents that of a physical system with mechanical defects.

Manuel Salmeron↗