Search NASA⌕ Search

SEARCH · Search NASA

Results for “distribution line modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Venus gravity field - Pioneer Venus Orbiter navigation results

The gravity field of Venus has been modeled by a spherical harmonic expansion of the potential to degree and order seven. The estimates of these coeficients were obtained by combining information from 43 short arcs (4 hr) of line-of-sight Doppler data centered at periapsis. The data arcs were distributed in longitude and time over more than two circulations of Venus by the Pioneer Venus Orbiter subperiapsis point which was confined to the band of latitudes from 14 deg N to 17 deg N. Convergence of the solution has been assured by iterating upon the initial estimate. All estimates were performed with zero a priori information on the gravity coefficients. Since the altitude of periapsis for most of the orbits was within the sensible Venusian atmosphere, drag effects on the estimated harmonics have been removed using an exponential atmosphere density model. Estimates of the mass parameter (GM) of Venus using this dataset are also evaluated.

Williams, B. G.↗
NASA NTRS1984

Heat transfer distributions around nominal ice accretion shapes formed on a cylinder in the NASA Lewis icing research tunnel

Local heat transfer coefficients were obtained on irregular cylindrical shapes which typify the accretion of ice on circular cylinders in cross flow. The ice shapes were grown on a 5.1 cm (2.0 in.) diameter cylinder in the NASA Lewis Icing Research Tunnel. The shapes were 2, 5, and 15 min accumulations of glaze ice and 15 min accumulation of rime ice. Heat transfer coefficients were also measured around the cylinder with no ice accretion. These icing shapes were averaged axially to obtain a nominal shape of constant cross section for the heat transfer tests. Heat transfer coefficients around the perimeter of each shape were measured with electrically heated copper strips embedded in the surface of the model which was cast from polyurethane foam. Each strip contained a thermocouple to measure the local surface temperature. The models were run in a 15.2 x 68.6 cm (6 x 27 in.) wind tunnel at several velocities. Background turbulence in the wind tunnel was less than 0.5 percent. The models were also run with a turbulence producing grid which gave about 3.5 percent turbulence at the model location with the model removed. The effect of roughness was also simulated with sand grains glued to the surface. Results are presented as Nusselt number versus angle from the stagnation line for the smooth and rough models for both high and low levels of free stream turblence. Roughness of the surface in the region prior to flow separation plays a major role in determining the heat transfer distribution.

Vanfossen, G. J.↗
NASA NTRS2017

Computational Design and Analysis of a Transonic Natural Laminar Flow Wing for a Wind Tunnel Model

A natural laminar flow (NLF) wind tunnel model has been designed and analyzed for a wind tunnel test in the National Transonic Facility (NTF) at the NASA Langley Research Center. The NLF design method is built into the CDISC design module and uses a Navier-Stokes flow solver, a boundary layer profile solver, and stability analysis and transition prediction software. The NLF design method alters the pressure distribution to support laminar flow on the upper surface of wings with high sweep and flight Reynolds numbers. The method addresses transition due to attachment line contamination/transition, Gortler vortices, and crossflow and Tollmien-Schlichting modal instabilities. The design method is applied to the wing of the Common Research Model (CRM) at transonic flight conditions. Computational analysis predicts significant extents of laminar flow on the wing upper surface, which results in drag savings. A 5.2 percent scale semispan model of the CRM NLF wing will be built and tested in the NTF. This test will aim to validate the NLF design method, as well as characterize the laminar flow testing capabilities in the wind tunnel facility.

Lynde, Michelle N.↗
NASA NTRS1974

Stability of partially lined combustors with distributed combustion

An integral method for theoretical evaluation of the stability of confined flows with mass sources is presented. This method is applied to evaluate the effect of partial length acoustic liners on liquid propellant combustors with distributed combustion sources. The combustor is modeled as a right circular cylinder terminated by a multiorifice (constant Mach number) nozzle. The spatial spread of combustion in the chamber is represented by an arbitrary number of pressure sensitive planar mass sources. On the cylindrical periphery of the chamber is an acoustic absorber of arbitrary length, position, and damping capability. Integral equations are developed from the partial differential equations describing the nonsteady flow and are solved iteratively. Results are given in terms of linear neutral stability plots using a pressure sensitive combustion response. Calculations indicate that increasing the axial spread of combustion increases the stability of the combustor and the effectiveness of the absorber. The most effective linear placement appears at the location of greatest combustion concentration.

Baer, M. R.↗
NASA NTRS1977

The galactic halo question: New size constraints from galactic gamma-ray data

The SAS-2 gamma-ray data is analyzed making use of recent CO line emission and other data for determining the large-scale distribution of galactic gas. A nonuniform distribution of cosmic rays in the galaxy is implied. This fact rules out large trapping halo models and extragalactic origin models. Detailed models of diffusion halos of various sizes perpendicular to the galactic plane are considered. In such models, the scale perpendicular to the plane has a strong effect in determining the radial distribution of cosmic rays. Such radial distributions are calculated for cylindrical coordinate models. The implied gamma-ray longitude distributions are then calculated and compared with the SAS-2 data for goodness-of-fit. Assuming the sources to be supernova remnants or pulsars, cosmic ray nucleon halo models with scale heights greater than 3 kpc are found to provide a poor fit to the gamma-ray longitude data (probability of 6% or less). Thin halo, or source dominated diffusion models are found to provide a good fit to the gamma-ray data, with an upper limit scale height of approximately 3 kpc.

Stecker, F. W.↗
NASA NTRS1984

The 3000 A bump in quasars

New observations of the 3000 A bump in quasars are presented and some simple considerations regarding its physical origin are addressed. Absolute spectrophotometry of 30 quasars with redshifts between 0.53 and 0.70 was obtained with the multichannel spectrometer on the 5 m Hale telescope with a rest wavelength coverage of 2000-5000 A. The continuum observations are well represented by a single power law plus a smooth, broad bump and superposed Fe II multiplets. The strength of the bump correlates fairly well with that of H-beta but poorly with those of the Mg II and Fe II lines. Models consisting of a power law and optically thick hydrogen continua with temperatures of about 12,000 K, and Balmer-edge optical depths equal to three fit the observed energy distributions well. The physical conditions and continuum emission of a dense slab of hydrogen heated by gamma rays are analyzed.

Oke, J. B.↗
NASA NTRS1985

Frequency response of a jet engine test facility air supply system

The frequency response of a laboratory scale model of a portion of the air supply system of an engine test facility is obtained both experimentally and using one-dimensional, small-signal, distributed parameter theory. The effects of line terminations and mean flow are considered. Good agreement between experiment and theory is obtained. Predictions are extended to a full scale test facility air supply system operating under several possible test conditions.

Franke, M. E.↗
NASA NTRS1985

Predicted interplanetary distribution of Lyman-alpha intensity and polarization

Techniques to reduce the uncertainties in model calculations of the interplanetary distribution of Lyman-alpha polarization and intensity are identified. In particular, the applications of a scheme for mapping the degree of linear polarization from a spacecraft at various locations in the Solar System is discussed. A sample calculation of the sky distribution of both intensity and polarization is presented, on the basis of a variety of models for neutral hydrogen. It is found that the polarization distribution over the sky is significantly different from the intensity distribution, and that the maximum degree of polarization of the Lyman-alpha line increases with heliocentric distance from the spacecraft from 0 to about 18 percent at a distance of 20 AU. A schematic drawing is provided in order to illustrate the mapping scheme.

Ajello, J. M.↗
NASA NTRS1985

Young stellar objects and their circumstellar dust - An overview

The basic observational classes of young stellar objects are briefly reviewed and some of the theoretical and observational problems in premain sequence stellar evolution are discussed. The evidence which indicates that the infrared excesses in recently formed stars are primarily due to thermal emission from circumstellar dust is summarized. Various indirect lines of evidence on the spatial distribution of the circumstellar dust are examined, and it is concluded that the concentration of the dust in a large disk structure is the most viable model at this time.

Rydgren, A. E.↗
NASA NTRS1987

Forbidden coronal iron line images of Puppis A - Cloud evaporation or shocked cloud?

Calibrated CCD images of the eastern X-ray knot in Puppis A, made in the forbidden red and green coronal Fe lines, are discussed. They show the high-temperature gas to have a rich morphology, with the scale of some features approaching the 2.6 arcsec resolution of the data. The pictures have been compared with an Einstein HRI soft X-ray image; there is close correspondence in the position and size of structures seen in the optical forbidden lines and in the X-rays. Located near the shock front a cloud of about 0.4 pc x 0.9 pc dimension shines brilliantly in the 5303 A line. To test the hypothesis that the cloud might be evaporating into the remnant interior, the 5303 A and 6374 A intensity distributions expected for a steady state, one-fluid evaporatig model have been computed.

Teske, Richard G.↗
NASA NTRS1988

Unresolved velocity structure in diffuse interstellar clouds

Recent high-resolution observations of interstellar absorption lines of CH and CN toward Zeta Oph obtained by Crane et al. (1986), and Palazzi et al. (1988), exhibit line widths that suggest thermal line broadening at high temperature, T about 1200 K. Observations of CO line emission at 2.6 mm toward Zeta Oph (Langer et al.,1987) indicate that the molecular gas resides in four distinct velocity components that span less than 3 km/s in Doppler velocity. Simulated CH and CN absorption line profiles are compared for high-temperature (T = 1200 K) thermal broadening and for a combination of low-temperature (T = 50 K) thermal plus turbulent broadening. It is shown that the two broadening models reproduce existing observations comparably well and are virtually indistinguishable at a lambda/Delta-lambda ratio of about 100,000. The observed differences in the CH and CN line widths may reflect slightly different distributions of those molecules along the line of sight. The simulations use very recent, improved laboratory spectroscopic data on CH (Bernath). Some related consequences of such unresolved velocity structure on the ultraviolet absorption lines of CO are examined. Indirect diagnostics of temperature in the Zeta Oph cloud favor low-temperature thermal plus turbulent broadening, and the implied rate of dissipation of turbulence is in harmony with estimates of the global input of mechanical energy into to interstellar medium.

Black, John H.↗
NASA NTRS1991

Theoretical description of spectral line profiles of parent molecules in cometary comae

The present overview of cometary spectral-line profiles obtainable through advancements in high-resolution spectroscopic studies, which allow the retrieval of coma kinematic properties from velocity-resolved spectral-line profiles, incorporates the most important gas dynamic processes into an outflow model which is tailored to the interpretation of spectroscopic observations of parent molecules. The model is then used to study the influence on parent-molecule spectral line profile formation of the field-of-view, the expansion velocity, the kinetic temperature, and the anisotropic outflow distributions.

Hu, Hong-Yao↗
NASA NTRS1994

Ultraviolet illuminated molecular cloud boundaries: Extended (C II) 158 micrometer emission toward L1630

The construction of a large scale map of the 158 micrometer C+ line toward the L1630/Orion B molecular cloud, covering an approximately 35' by 45' area which includes the NGC 2024 H II region, zeta-Ori, the reflection nebula NGC 2023, and the Horsehead nebula, is reported. Emission in the C II line is very widespread. The line was detected at levels in excess of a few 0.0001 erg/sq cm/s/sr over almost the entire mapped region. Extended emission associated with the NGC 2024 H II region and its envelope accounts for more than half of the C II flux. Over this approximately 1.5 by 2.5 pc region, the amount of gas phase carbon in the form of C+ is comparable to the amount of carbon in CO. This result, together with the C II distribution implies that C II emission arises on the surface of clumps throughout the cloud rather than in a single layer at the H II region boundary. Away from the H II region, most of the C II emission comes from the western edge of the L1630 cloud and probably results from excitation by external OB stars. The overall extent of the C II emission is comparable to that of millimeter molecular lines but the distributions are different in detail. The difference in C II and molecular line distributions, in particular, the larger extent of the C II emission west of NGC 2024 implies large variations in the ratio of the C II and J = 1 towards 0 intensities. Models of photon dominated regions can explain the relation between C II and CO intensities only if the cloud edges and cloud interior are considered separately. A method for using C II and radio continuum emission to characterize the relationship between OB stars and photon dominated regions is proposed.

Jaffe, D. T.↗
NASA NTRS1995

Driven acoustic oscillations within a vertical magnetic field

The effects of a vertical magnetic field on p-mode frequencies, line widths, and eigenfunctions, are examined. A solar model, consisting of a neutrally stable polytropic interior matched to an isothermal chromosphere, is applied. The p-modes are produced by a spatially distributed driver. The atmosphere is threaded by a constant vertical magnetic field. The frequency shifts due to the vertical magnetic field are found to be much smaller than the shifts caused by horizontal fields of similar strength. A large vertical field of 2000 G produces shifts of several nHz. It is found that the frequency shifts decrease with increasing frequency and increase with field strength. The coupling of the acoustic fast mode to the escaping slow modes is inefficient. Constant vertical magnetic field models are therefore incapable of explaining the high level of absorption observed in sunspots and plage.

Hindman, Bradley W.↗
NASA NTRS1995

Observations of the solar wind speed near the sun

Two-antenna scintillation (IPS) observations can provide accurate measurements of the velocity with which electron density fluctuations drift past the line of sight. We will present recent IPS measurements made with the EISCAT and VLBA arrays. It is common, particularly during declining activity. for the line of sight to pass through plasma with a wide range of speed. Therefore it is important to account for the line of sight integration. It is clear from ULYSSES measurements that the speed is bimodal in nature, i.e., either 'fast' or 'slow.' Thus it is not necessary to model a continuous velocity distribution - one need only locate the 'fast-slow' interface. In addition one must consider the possibility that the density fluctuations are moving with respect to the flow of particles. Alfven waves propagating through field-aligned density fluctuations can mimic a sound wave in this respect, so the apparent IPS velocity can be the flow speed plus the Alfven speed. In modeling the IPS it is important that the scattering be 'weak,' because the weak scattering model requires only 1 spatial parameter instead of 3. Furthermore the effect of multiple velocities in much more distinct in weak scattering. EISCAT can only operate near 933 MHz, which limits the observations to outside of 17R(solar mass). The VLBA is the only facility with the combination of high frequency operation and long baselines required to observe inside of 15R(solar mass). A simple bimodal model has been successfully used to interpret our IPS observations near the sun. Farther out interaction regions have built up significantly and a two speed model is no longer valid. An apparent deceleration in the fast polar wind is sometimes evident when compared to the ULYSSES observation. The density variance delta N(exp 2)e in the fast wind appears to decrease from equator to pole.

Grall, R. R.↗
NASA NTRS2016

NuSTAR, SWIFT, and GROND Observations of the Flairing MeV Blazar PMN J0641-0320

MeV blazars are a sub-population of the blazar family, exhibiting larger-than-average jet powers, accretion luminosities, and black hole masses. Because of their extremely hard X-ray continua, these objects are best studied in the X-ray domain. Here, we report on the discovery by the Fermi Large Area Telescope and subsequent follow-up observations with NuSTAR, Swift, and GROND of a new member of the MeV blazar family: PMN J0641-0320. Our optical spectroscopy provides confirmation that this is a flat-spectrum radio quasar located at a redshift of z = 1.196. Its very hard NuSTAR spectrum (power-law photon index of approx.1 up to approx. 80 keV) indicates that the emission is produced via inverse Compton scattering off of photons coming from outside the jet. The overall spectral energy distribution of PMN J0641-0320 is typical of powerful blazars and, using a simple one-zone leptonic emission model, we infer that the emission region is located either inside the broad line region or within the dusty torus.

galaxies: active quasars: general↗
NASA NTRS2008

Distribution automation applications of fiber optics

Motivations for interest and research in distribution automation are discussed. The communication requirements of distribution automation are examined, and shown to exceed the capabilities of power line carrier, radio and telephone systems. A fiber-optic-based communication system is described that is co-located with the distribution system and that ould satisfy the data rate and reliability requirements. A cost comparison shows that it could be constructed at a cost that is similar to that of a power line carrier system. The requirements for fiber optic sensors for distribution automation are discussed. The design of a data link suitable for opticallypowered electronic sensing is presented. Empirical results are given. A modeling technique that has been used to understand the reflections of guided light from a variety of surfaces is described. An optical positionindicator design is discussed. Systems aspects of distribution automation are discussed, in particular the lack of interface, communications and data standards. The economics of distribution automation are examined

Friend, H.↗
NASA NTRS1984

Three-dimensional finite-element analysis of chevron-notched fracture specimens

Stress-intensity factors and load-line displacements were calculated for chevron-notched bar and rod fracture specimens using a three-dimensional finite-element analysis. Both specimens were subjected to simulated wedge loading (either uniform applied displacement or uniform applied load). The chevron-notch sides and crack front were assumed to be straight. Crack-length-to-specimen width ratios (a/w) ranged from 0.4 to 0.7. The width-to-thickness ratio (w/B) was 1.45 or 2. The bar specimens had a height-to-width ratio of 0.435 or 0.5. Finite-element models were composed of singularity elements around the crack front and 8-noded isoparametric elements elsewhere. The models had about 11,000 degrees of freedom. Stress-intensity factors were calculated by using a nodal-force method for distribution along the crack front and by using a compliance method for average values. The stress intensity factors and load-line displacements are presented and compared with experimental solutions from the literature. The stress intensity factors and load-line displacements were about 2.5 and 5 percent lower than the reported experimental values, respectively.

Raju, I. S.↗