Search NASA⌕ Search

SEARCH · Search NASA

Results for “driver”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Quasiperiodic behavior in beam-driven strong Langmuir turbulence

The evolution of unmagnetized beam-driven strong Langmuir turbulence is studied in two dimensions by numerically integrating the Zakharov equations for systems pumped by monochromatic and broadband negative-damping drivers with nonzero central wavenumber. Long-time statistically steady states are reached for which the dependence of the evolution on the driver wavenumber, growth rate, and bandwidth is examined in detail. For monochromatic drivers, a quasiperiodic cycle is found to develop if the driver wavenumber is sufficiently large. The characteristic frequency of the quasiperiodic cycle and the average system energy are both approximately proportional to the growth rate. Broadening of the driver in wavenumber tends to degrade the system-wide coherence of the cycle, but its main features appear to survive on the scale of the coherence length of the driver.

Robinson, P. A.↗

System for memorizing maximum values

The invention discloses a system capable of memorizing maximum sensed values. The system includes conditioning circuitry which receives the analog output signal from a sensor transducer. The conditioning circuitry rectifies and filters the analog signal and provides an input signal to a digital driver, which may be either linear or logarithmic. The driver converts the analog signal to discrete digital values, which in turn triggers an output signal on one of a plurality of driver output lines n. The particular output lines selected is dependent on the converted digital value. A microfuse memory device connects across the driver output lines, with n segments. Each segment is associated with one driver output line, and includes a microfuse that is blown when a signal appears on the associated driver output line.

Bozeman, Richard J., Jr.↗

Experimental investigation of nozzle/plume aerodynamics at hypersonic speeds

Work continued on the improvement of 16-Inch Shock Tunnel. This comprised studies of ways of improving driver gas ignition, an improved driver gas mixing system, an axial translation system for the driver tube, improved diaphragm materials (carbon steel vs. stainless steel), a copper liner for the part of the driven tube near the nozzle, the use of a buffer gas between the driver and driven gases, the use of N2O in the driven tube, the use of a converging driven tube, operation of the facility as a non-reflected shock tunnel and expansion tube, operation with heated hydrogen or helium driver gas, the use of detonations in the driver and the construction of an enlarged test section. Maintenance and developmental work continued on the scramjet combustor continued. New software which greatly speeds up data analysis has been written and brought on line. In particular, software which provides very rapid generation of model surface heat flux profiles has been brought on line. A considerable amount of theoretical work was performed in connection with upgrading the 16 Inch Shock Tunnel Facility. A one-dimensional Godunov code for very high velocities and any equation of state is intended to add viscous effects in studying the operation of the Shock Tunnel and also of two-stage light gas guns.

Bogdanoff, David W.↗

System for Memorizing Maximum Values

The invention discloses a system capable of memorizing maximum sensed values. The system includes conditioning circuitry which receives the analog output signal from a sensor transducer. The conditioning circuitry rectifies and filters the analog signal and provides an input signal to a digital driver, which may be either liner or logarithmic. The driver converts the analog signal to discrete digital values, which in turn triggers an output signal on one of a plurality of driver output lines n. The particular output lines selected is dependent on the converted digital value. A microfuse memory device connects across the driver output lines, with n segments. Each segment is associated with one driver output line, and includes a microfuse that is blown when a signal appears on the associated driver output line.

Bozeman, Richard J., Jr.↗

There is More to the Autopilot Button than Meets the Eye

Following a series of crashes in which semiautonomous cars collided with high-visibility emergency vehicles, this article looks at the human factors challenges of partially automated driving. I review recent research that investigates the capabilities of driver assist systems, the limits of human attention and vigilance, the impact of automation use on driver fatigue, and driver understanding of all of the above. I review the efforts being made to align driver understanding with system reality: instructions and warnings, point-of-sale driver training, automation training standards, and vehicle design. I conclude that several important safety concepts, revealed by research, have yet to be effectively communicated to drivers who will need them to operate these cars safely.

automation↗

South Pole Lunar Lighting Studies for Driving Exploration on the Lunar Surface

NASA’s Artemis lunar missions will face new exploration challenges due to inherently low sun angles in the lunar south pole region. Whereas the Apollo missions were afforded sunlight for approximately 8 to 50-degrees above the horizon, sunlight for the next lunar missions will only be 1 to 2-degrees about the horizon. With this low angle, long shadows and high contrasts of light and dark areas will be faced by the crew and remote teleop operators while exploring the lunar surface. With this in mind, NASA developed an integrated virtual Lighting and Navigation Simulation to understand these challenges. Two studies have been conducted in this Lunar South Pole environment to evaluate the effects of natural and artificial lighting on driving and navigating a lunar rover across the surface. Early NASA studies, such as this, are used to aid in developing techniques and explore concepts of operations to promote mission success and crew safety. In the Phase One development evaluation, six astronauts were teleported to ten different lighting conditions. For each location, drivers were to drive to an imaginary target approximately 200-meters straight ahead and provide subjective feedback on their ability to drive under the given lighting conditions. Phase Two, a more operational study, four astronauts and a remote operator tested five different Artemis lunar mission scenarios. Results indicated sun direction at such low angles, especially when driving a high speed, can severely impact the crew’s ability to safely drive the rover. In the up-sun situation, with the sun directly in the driver’s eyes and compounded long shadows, the consistent preference among drivers was to initiate a tacking strategy of approximately +/- 20 to 30-degrees to improve visibility. This maneuver does require more time and rover energetics. Conversely, driving down-sun required the crew to tack as well to avoid the shadow of rover blocking the terrain. Less appreciated is how the surrounding landscape is lit. Traveling into shadowed areas, especially while facing a lit terrain beyond the shadowed area, drivers enter at their own risk due to pupil contraction making artificial lights useless. Additionally, the constant transitioning between dark and light areas are mentally taxing to the crew and natural navigational references such as the stars are invisible and therefore unusable. Slope and depth magnitude are very difficult hazards to judge when approaching a shadowed crater. This naturally leads to slower driving speeds than originally anticipated. As for observing scientifically interesting features, assessing them accurately varies greatly by the lighting condition. In most cases, the task can be completed, but the strategy is to use the sun to one’s advantage. Crew workload distribution in the cockpit for driving operations was split amongst crew. The driver primarily focused attention on visual terrain (80%) but referenced displays approximately 20% of the time, while the co-pilot/navigator generally provided directional cues to the driver. These natural lighting conditions present significant challenges for safe rover operations; however, early studies having given investigators a “first-look” into understanding of how operating on the South Lunar Pole can be accomplished.

LTv↗

On the complex state of the interplanetary medium of 28-29 July 1977

Observations of plasma and magnetic field variations in the near-Earth solar wind are discussed. Both a corotating stream and a driven shock are present. The driver gas seems to be enveloped in the rising speed phase of this stream; this appearance is attributed to a convoluted surface separating the two plasma domains. The magnetic field in the post shock flow (0030-1230 UT of July 29) has a large and geoeffective southward component at times; the energy coupling coefficient reaches approximately 5.4 x 10 to the 19th power ergs/s. In the driver gas (1230 UT of July 29 to 0110 of July 30) the magnetic field is dominantly northward. The density and dynamic pressure decrease by almost two orders of magnitude (100 to 2 cm/3) from just behind the interplanetary shock to approximately 3 hours into the driver gas flow. The dominant magnetic field variation in the driver gas is modeled by a cloud-like structure. Significant plasma parameter variations within the driver gas are attributed to structure in the parent solar mass ejection event and to interplanetary kinematics.

King, J. H.↗

Experimental investigation of nozzle/plume aerodynamics at hypersonic speeds

An extensive program to improve the operation of the Ames 16 Inch Shock Tunnel was carried out. This included reduction of driver slosh wave amplitudes and detonation risk by the use of premixed He/O2 gas, longer wait times between the last gas load and driver gas ignition, an improved gas loading sequence, the use of four instead of one ignition wire, and the use of lower ignition wire voltages. Successful operation of the tunnel at pressures of 2000-6000 psi and enthalpies up to 12,000 J/gm was achieved. A new diaphragm breaking technique, self break on the driver combustion pressure rise, was tested and found to produce clean breaks over the full pressure range of the tunnel. Improvements were made to the driver gas loading manifold and a preliminary design was made of a gas mixing system which mixes all three gases on the fly just before injection into the driver. Other improvements as well as tests are discussed.

Bogdanoff, David W.↗

The Balsa bullet: A high speed, low-cost general aviation aircraft for Aeroworld

The Balsa Bullet is a high speed, low cost six passenger general aviation aircraft. It will cruise at a speed of 55 ft/s with a maximum speed of 75 ft/s for distances in excess of 27000 feet. This range and speed combination provide The Balsa Bullet with the capability to service any two existing airports in Aeroworld in an efficient and timely manner. Overall, three major design drivers have been identified by the design team. The first is to provide a low cost airplane to the Aeroworld market. Maintaining the low cost objective will not simply meet the mission objective, but will also make the Bullet an economically viable option for a wide number of consumers. The Balsa Bullet has a total manufacturing cost of $1000 with a price to the consumer of only $2562. The second major driver is high speed performance. Once again this driver exists not only to meet the mission objective given Long Shot Aeronautics but it provides a desirable feature to the consumer, pride in owning the fastest aircraft in Aeroworld. The third design driver identified is the capability to service any runway in Aeroworld necessitating the ability to takeoff within 28 ft, the length of the shortest runways in Aeroworld. These design drivers provide three great reasons for the general public to purchase a Bullet.

Eastland, Kevin↗

Review Of Existing Facilities: Shock Tunnels, Part of AIAA Short Course On Aerothermodynamic Facilities and Applications

This review is divided into two main sections. The first section described the various types of shock tunnel facilities - reflected shock tunnels, non-reflected shock tunnels and expansion tubes/tunnels. Driver technology is then described, followed by a discussion of the performance obtainable from various driver-driven combinations. A survey of a number of facilities is then presented. The second part of the review deals with details of the operation of the facilities. Operation of combustion drivers, electrically heated drivers and piston compression drivers is discussed in some detail. Main diaphragm break techniques are discussed, with particular attention being paid to maintaining the integrity of the diaphragm petals. Secondary diaphragm techniques are discussed. Phenomena which limit test time are discussed and a number of techniques to increase test time are presented. Contamination of the flow with material ablated from the wall is discussed along with the relative suitability of various materials for lining the tubes and nozzle. Finally, boundary layer effects in shock tunnels and expansion tubes are discussed.

Bogdanoff, David W.↗

Physical Analysis and Scaling of a Jet and Vortex Actuator

Our previous studies have shown that the Jet and Vortex Actuator generates free-jet, wall-jet, and near- wall vortex flow fields. That is, the actuator can be operated in different modes by simply varying the driving frequency and/or amplitude. For this study, variations are made in the actuator plate and wide-slot widths and sine/asymmetrical actuator plate input forcing (drivers) to further study the actuator induced flow fields. Laser sheet flow visualization, particle- image velocimetry, and laser velocimetry are used to measure and characterize the actuator induced flow fields. Laser velocimetry measurements indicate that the vortex strength increases with the driver repetition rate for a fixed actuator geometry (wide slot and plate width). For a given driver repetition rate, the vortex strength increases as the plate width decreases provided the wide-slot to plate-width ratio is fixed. Using an asymmetric plate driver, a stronger vortex is generated for the same actuator geometry and a given driver repetition rate. The nondimensional scaling provides the approximate ranges for operating the actuator in the free jet, wall jet, or vortex flow regimes. Finally, phase-locked velocity measurements from particle image velocimetry indicate that the vortex structure is stationary, confirming previous computations. Both the computations and the particle image velocimetry measurements (expectantly) show unsteadiness near the wide-slot opening, which is indicative of mass ejection from the actuator.

Lachowicz, Jason T.↗

Active noise control using noise source having adaptive resonant frequency tuning through variable ring loading

A noise source for an aircraft engine active noise cancellation system in which the resonant frequency of noise radiating structure is tuned to permit noise cancellation over a wide range of frequencies. The resonant frequency of the noise radiating structure is tuned by a plurality of drivers arranged to contact the noise radiating structure. Excitation of the drivers causes expansion or contraction of the drivers, thereby varying the edge loading applied to the noise radiating structure. The drivers are actuated by a controller which receives input of a feedback signal proportional to displacement of the noise radiating element and a signal corresponding to the blade passage frequency of the engine's fan. In response, the controller determines a control signal which is sent to the drivers, causing them to expand or contract. The noise radiating structure may be either the outer shroud of the engine or a ring mounted flush with an inner wall of the shroud or disposed in the interior of the shroud.

Pla, Frederic G.↗

Advanced Infant Car Seat Would Increase Highway Safety

An advanced infant car seat has been proposed to increase highway safety by reducing the incidence of crying, fussy behavior, and other child-related distractions that divert an adult driver s attention from driving. In addition to a conventional infant car seat with safety restraints, the proposed advanced infant car seat would include a number of components and subsystems that would function together as a comprehensive infant-care system that would keep its occupant safe, comfortable, and entertained, and would enable the driver to monitor the baby without having to either stop the car or turn around to face the infant during driving. The system would include a vibrator with bulb switch to operate; the switch would double as a squeeze toy that would make its own specific sound. A music subsystem would include loudspeakers built into the seat plus digital and analog circuitry that would utilize plug-in memory modules to synthesize music or a variety of other sounds. The music subsystem would include a built-in sound generator that could synthesize white noise or a human heartbeat to calm the baby to sleep. A second bulb switch could be used to control the music subsystem and would double as a squeeze toy that would make a distinct sound. An anti-noise sound-suppression system would isolate the baby from potentially disturbing ambient external noises. This subsystem would include small microphones, placed near the baby s ears, to detect ambient noise. The outputs of the microphone would be amplified and fed to the loudspeakers at appropriate amplitude and in a phase opposite that of the detected ambient noise, such that the net ambient sound arriving at the baby s ears would be almost completely cancelled. A video-camera subsystem would enable the driver to monitor the baby visually while continuing to face forward. One or more portable miniature video cameras could be embedded in the side of the infant car seat (see figure) or in a flip-down handle. The outputs of the video cameras would be transmitted by radio or infrared to a portable, miniature receiver/video monitor unit that would be attached to the dashboard of the car. The video-camera subsystem can also be used within transmission/reception range when the seat was removed from the car. The system would include a biotelemetric and tracking subsystem, which would include a Global Positioning System receiver for measuring its location. This subsystem would transmit the location of the infant car seat (even if the seat were not in a car) along with such biometric data as the baby s heart rate, perspiration rate, urinary status, temperature, and rate of breathing. Upon detecting any anomalies in the biometric data, this subsystem would send a warning to a paging device installed in the car or carried by the driver, so that the driver could pull the car off the road to attend to the baby. A motion detector in this subsystem would send a warning if the infant car seat were to be moved or otherwise disturbed unexpectedly while the infant was seated in it: this warning function, in combination with the position- tracking function, could help in finding a baby who had been kidnapped with the seat. Removable rechargeable batteries would enable uninterrupted functioning of all parts of the system while transporting the baby to and from the car. The batteries could be recharged via the cigarette-lighter outlet in the car or by use of an external AC-powered charger.

Dabney, Richard↗

MEMS-Based Piezoelectric/Electrostatic Inchworm Actuator

A proposed inchworm actuator, to be designed and fabricated according to the principles of microelectromechanical systems (MEMS), would effect linear motion characterized by steps as small as nanometers and an overall range of travel of hundreds of microns. Potential applications for actuators like this one include precise positioning of optical components and active suppression of noise and vibration in scientific instruments, conveyance of wafers in the semiconductor industry, precise positioning for machine tools, and positioning and actuation of micro-surgical instruments. The inchworm motion would be generated by a combination of piezoelectric driving and electrostatic clamping. The actuator (see figure), would include a pair of holders (used for electrostatic clamping), a slider (the part that would engage in the desired linear motion), a driver, a piezoelectric stack under the driver, and a pair of polymer beams centrally clamped to the flexure beam via a T bar. The holders would be held stationary. One end of the piezoelectric stack would be held stationary; the other end would be connected to the bottom of the driver, which would be free to move up and down. All of these components except the piezoelectric stack and the polymer beams would be micromachined from a 500- m-thick silicon wafer by deep reactive-ion etching. The inchworm motion would be perpendicular to the broad faces of the wafer (perpendicular to the plane of the figure). The combination of the polymer beams and the centrally clamped flexure beam would spring-bias the slider into a position such that, in the absence of electrostatic clamping, the gap between the slider on the one hand and both the driver and the holder on the other hand would be no more than a few microns. This arrangement would make it possible to electrostatically pull the slider into contact with either the holders or the driver at a clamping force of the order of 1 N by applying a reasonably small voltage (of the order of 100 V).

Yang, Eui-Hyeok↗

Environment Modeling Using Runtime Values for JPF-Android

Software applications are developed to be executed in a specific environment. This environment includes external native libraries to add functionality to the application and drivers to fire the application execution. For testing and verification, the environment of an application is simplified abstracted using models or stubs. Empty stubs, returning default values, are simple to generate automatically, but they do not perform well when the application expects specific return values. Symbolic execution is used to find input parameters for drivers and return values for library stubs, but it struggles to detect the values of complex objects. In this work-in-progress paper, we explore an approach to generate drivers and stubs based on values collected during runtime instead of using default values. Entry-points and methods that need to be modeled are instrumented to log their parameters and return values. The instrumented applications are then executed using a driver and instrumented libraries. The values collected during runtime are used to generate driver and stub values on- the-fly that improve coverage during verification by enabling the execution of code that previously crashed or was missed. We are implementing this approach to improve the environment model of JPF-Android, our model checking and analysis tool for Android applications.

Verification↗

Measurement of Test Time in the NASA Ames EAST Expansion Cone Facility in Entry 63 and Possible Techniques for Increasing Test Time

The Ames EAST facility and its modes of operation (expansion tube, expansion cone) are described. A buffer section may or may not be used between the driver and the driven tube. Previous expansion tube (without the cone) entries are reviewed. Test times of 4 to 5 microsec were achieved at shock speeds up to 11 km/s. The test conditions and results of the present entry (entry 63) (with the cone) are given. Test times were found to correlate roughly with the density ratio across the buffer gas - driven gas or driver - driven gas interface. Tests with a 12 inch long conical driver without a buffer yielded three runs with test times of ~8 km/s and 3 runs with test times of 4 to 6 microsecs. With a buffer, test times for 4 runs of ~9 microsecs and for 2 runs of 3 to 6 microsecs were obtained. Adding argon to the buffer was found not to improve the test time. Tests with a 30 inch long driver without a buffer yielded test times of 14+, ~10, 7.5 (2 runs) and 5.5 (2 runs) microsecs. Based on one shot, data for the 30 inch driver suggests that test times up to ~14 microseconds could be obtained. The repeatability of that shot, of course, must be established. Suggestions are given to increase test times further.

Electric arc shock tube↗

Jupiter entry simulation with the ANAA shock tube

An annular arc accelerator (ANAA) shock tube has been built which produces shock velocities and pressures that simulate entry into the atmosphere of Jupiter. The ANAA driver deposits the energy of an arc discharge into a flowing gas, which then expands and cools without any delay for the opening of a diaphragm. A flow transducer, trigger system, and spark gap switches have been developed to coordinate the flow from a high-pressure helium driver with the discharge from a 300-kJ capacitor bank. Shock velocities up to 47 km/sec have been produced in 1.0 torr of hydrogen with the ANAA shock tube, compared with 35 km/sec velocity produced in a conical arc driver with three times the available energy. Attenuation with the ANAA shock tube is comparable to that of a conical arc driver shock tube, and initial spectroscopic measurements indicate that an impurity-free test slug is formed behind the shock wave.

Leibowitz, L. P.↗

Effects of automobile steering characteristics on driver/vehicle system performance in discrete maneuvers

A series of discrete maneuver tasks were used to evaluate the effects of steering gain and directional mode dynamic parameters on driver/vehicle responses. The importance and ranking of these parameters were evaluated through changes in subjective driver ratings and performance measures obtained from transient maneuvers such as a double lane change, an emergency lane change, and an unexpected obstacle. The unexpected obstacle maneuver proved more sensitive to individual driver differences than to vehicle differences. Results were based on full scale tests with an experienced test driver evaluating many different dynamic configurations plus seventeen ordinary drivers evaluating six key configurations.

Klein, R. H.↗