SEARCH · Search NASA

Results for “early solar system processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

All sources NASA NTRS DOE OSTI

NASA NTRS2002

Comet Grains: Their IR Emission and Their Relation to ISM Grains

Comets and the chodritic, porous interplanetary dust particles (CP IDPs) that they shed in their comae are reservoirs of primitive solar nebula materials. The high porosity and fragility of cometary grains and CP IDPs, and anomalously high deuterium contents of highly fragile, pyroxene-rich Cluster IDPs imply these aggregate particles contain significant abundances of grains from the interstellar medium (ISM). IR spectra of comets (3 - 40 micron) reveal the presence of a warm (nearIR) featureless emission modeled by amorphous carbon grains. Broad and narrow resonances near 10 and 20 microns are modeled by warm chondritic (50% Fe and 50% Mg) amorphous silicates and cooler Mg-rich crystalline silicate minerals, respectively. Cometary amorphous silicates resonances are well matched by IR spectra of CP IDPs dominated by GEMS (0.1 micron silicate spherules) that are thought to be the interstellar Fe-bearing amorphous silicates produced in AGB stars. Acid-etched ultramicrotomed CP IDP samples, however, show that both the carbon phase (amorphous and aliphatic) and the Mg-rich amorphous silicate phase in GEMS are not optically absorbing. Rather, it is Fe and FeS nanoparticles embedded in the GEMS that makes the CP IDPs dark. Therefore, CP IDPs suggest significant processing has occurred in the ISM. ISM processing probably includes in He' ion bombardment in supernovae shocks. Laboratory experiments show He+ ion bombardment amorphizes crystalline silicates, increases porosity, and reduces Fe into nanoparticles. Cometary crystalline silicate resonances are well matched by IR spectra of laboratory submicron Mg-rich olivine crystals and pyroxene crystals. Discovery of a Mg-pure olivine crystal in a Cluster IDP with isotopically anomalous oxygen indicates that a small fraction of crystalline silicates may have survived their journey from AGB stars through the ISM to the early solar nebula. The ISM does not have enough crystalline silicates (<5%) , however, to account for the deduced abundance of crystalline silicates in comet dust. An insufficient source of ISM Mg-rich crystals leads to the inference that most Mg-rich crystals in comets are primitive grains processed in the early solar nebula prior to their incorporation into comets. Mg-rich crystals may condense in the hot (approx. 1450 K), inner zones of the early solar nebula and then travel large radial distances out to the comet-forming zone. On the other hand, Mg-rich silicate crystals may be ISM amorphous silicates annealed at approx. 1000 K and radially distributed out to the comet-forming zone or annealed in nebular shocks at approx. 5 - 10 AU. Determining the relative abundance of amorphous and crystalline silicates in comets probes the relative contributions of ISM grains and primitive grains to small, icy bodies in the solar system. The life cycle of dust from its stardust origins through the ISM to its incorporation into comets is discussed.

Wooden, Diane H.↗

NASA NTRS1983

Radio metric orbit determination for the Giotto mission to Comet Halley

An international fleet of five spacecraft will fly past Comet Halley as it travels through the inner solar system in early 1986. This paper discusses orbit determination problems associated with the Giotto spacecraft, sponsored by the European Space Agency. The large number of spin axis precession maneuvers required to maintain the desired spacecraft attitude creates a new kind of radio metric orbit determination problem for this mission. This paper investigates the accuracy with which the Giotto spacecraft orbit can be determined relative to the earth or the sun, and establishes the sensitivity of this accuracy to the selection of the parameters to be estimated, the form of estimator used, the number of tracking stations employed, the length of the data arc, the selection of data types processed, and the levels of various error sources.

Wood, L. J.↗

NASA NTRSDate not supplied

Noble Gases in Samples Returned From Asteroids Ryugu and Bennu

Introduction: The asteroid sample return missions, JAXA’s Hayabusa2 [1] and NASA’s OSIRIS-REx [2], fromC-rich asteroids Ryugu and Bennu offer unique opportunities to sample pristine early solar system material, unaffected by terrestrial weathering and contamination, and with a known geological context. The comparison with most primi-tive members of carbonaceous –and inner solar system ordinary and enstatite– chondrite classes allows us to (i) assess the variation (or the lack of thereof) of the distribution of the most volatile elements throughout the entire early solar system, (ii) determine the effects of parent body thermal and aqueous alteration, and (iii) learn about the dynamic evolution and history of the various parent bodies, as sampled by both return missions and meteorite delivery. Here we will present noble gas data obtained from newly received particles from Ryugu and Bennu. Samples & Analysis: We received nine particles allocated by JAXA, with masses of 0.5-1.7 mg mass: four col-lected during Hayabusa2’s first touchdown (chamber A) and five from a small artificial crater (chamber C). We received three particles from Bennu of 0.07, 0.89 and 0.94 mg mass (OREX-800032-102/3/4). All particles were processed, allocated, weighed, and transferred into our UHV sample chamber within pure N2, to prevent any contact with air. We examined all He-Xe isotopes with our custom-built mass spectrometer “Albatros” ([3,4]). Gases were extracted individually from each particle by melting induced by a 1064 μm Nd:YAG IR laser in 2–4 heating steps. Large amounts of water and other reactive volatiles were released, consistent with the presence of abundant volatiles from both Ryugu and Bennu. Residues of Ryugu particles remaining after lasering, subsequently exposed to air, were additionally extracted in a crucible to verify complete gas extraction. Only the particle that still showed a “crystalline” structure after lasering contained detectable Ryugu noble gases, whereas all other particles turned immediately into glassy spheres by laser heating and lacked any gas. Results & Discussion: Ryugu and Bennu matter contains noble gases similar to the most pristine, unheated aqueously altered meteorites, e.g., CM or CI chondrites [5,6]. Remarkably, all four chamber A samples that originated from Ryugu’s surface show solar wind (SW) Ne (trapped (20Ne/22Ne)tr ~12–13), whereas all five chamber C samples do not ((20Ne/22Ne)tr ~9.0–10.7 consistent with the presence of non-solar trapped Ne components such as Q and HL). This demonstrates that JAXA’s sampling strategy succeeded: Chamber C samples analyzed in this work originated from areas shielded from SW, slightly below the surface, that was sampled after the impactor excavated material. The three Bennu particles populate the same range as the Ryugu particles in Ne isotope space with one particle containing SW suggesting that it was part of the uppermost surface layer of Bennu during sampling, while Ne in the smallest sample can be explained best by mixing Ne from presolar diamonds and SiC or graphite, and that in the third one by mixing of, e.g., Q and HL. Using cosmic ray production rates given by [7] yields preliminary exposure ages for Ryugu particles in the same range as determined in [7]. There is, as expected, also no systematic difference between samples from chambers A and C because both sample sets were likely collected within the uppermost layer of Ryugu, which were not shielded from cosmic rays. The concentration of cosmogenic (cos) Ne in the Bennu particle, where Necos was resolvable, is in the same range as found for Ryugu, suggesting roughly similar exposure time to cosmic rays for 5–8 Ma for all particles examined here. The Xe isotopic compositions of all particles are consistent with those of phase Q, with small additions of Xe-HL from presolar diamonds and excess 129Xe* from short-lived 129I decay. The comparably high 129Xe*/129XeQ ratio is similar in all samples, suggesting similar initial I concentrations and closure to Xe loss –or the incorporation of a well-mixed Xe reservoir. The Bennu material was in brief contact with air in the capsule, after atmospheric entry and before storage in pure N2 in a clean room. Both, the –most diagnostic– Xe isotopes and the Ar/Xe vs. Kr/Xe systematics prove that the noble gases are not affected by terrestrial contamination, in contrast to many CI, CY, and CM chondrites found on Earth [5,6], illustrating the importance of sample return. He-Xe concentrations in all particles unaffected bySW are comparable to but at the upper end of ranges reported [5-7]. In accordance with the strong aqueous alteration experienced on the parent bodies of Ryugu and Bennu [1,2], all samples lack the Ar-rich and water-susceptible noble gas components found in less aqueously altered CMs or CRs [e.g., 5,8] and all COs.

Henner Busemann↗

NASA NTRS2009

Early History of the Moon: Zircon Perspective

The Moon is believed to have formed from debris produced by a giant impact of a Mars sized body with the Earth (at around 4.51 Ga), forming a primitive body with a thick global layer of melt referred to as the Lunar Magma Ocean (LMO). The crystallization of LMO created internal stratification of the Moon forming main geochemical reservoirs. The surface features on the Moon were shaped by the subsequent collision with several large impactors during a short period of time (3.9-4.0 Ga). This process known as the Late Heavy Bombardment is supported by models of planetary motion, suggesting that rapid migration of giant planets could have triggered a massive delivery of planetesimals from the asteroid belt into the inner Solar System at about 3.9 Ga. Although, general chronology of LMO and LHB is well established using both long lived (U-Pb, Rb-Sr, Sm-147-Nd-143 and Ar-Ar) and extinct (Hf-182-W-182 and 146Sm-142Nd) isotope systems, some of these systems such as Ar-Ar are known to reset easily during secondary thermal overprints. As a result important details in the timing of LMO and LHB remain unresolved. In addition, the relative weakness of these systems under high T conditions can potentially bias the chronological information towards later events in the history of the Moon.

Grange, M.L.↗

NASA NTRS1998

Mineralogic and Petrologic Studies of Meteorites and Lunar Samples

In the period named, P.I. Wood and his Research Associate M.I. Petaev published or submitted for publication the following papers and abstracts, which address the subjects: Simulation of melting-crystallization relationships in chondritic and achondritic igneous systems. METEOMOD: A numerical model for the calculation of melting-crystalyization relationships in meteoritic igneous systems. Secondary Ca-Fe-rich minerals in the Bali-like and Allende-like oxidized CV3 chondrites and Allende dark inclusions. Silica minerals in the Gibeon IVA iron meteorite. Drusy vugs in the Albion iron meteorite: Mineralogy and textures. Search for exsolved ferromagnesian olivines: A meteoritic survey. Cr-bearing minerals in the Gibeon IVA iron: Indicators of sulfur and oxygen fugacities in the parent body. Lunar Planet. Computer modelling of ordinary chondrite melting. Drusy vugs in the Albion iron meteorite: Early speculation on the origin. Also Processing of chondritic and planetary material in spiral density waves in the nebula. Chondrite formation by turbulence and shock in the solar nebula.

Wood, John A.↗

NASA NTRS2005

Liquid Hydrocarbons on Titan's Surface? How Cassini ISS Observations Fit into the Story (So Far)

Titan is the only satellite in our Solar System with a substantial atmosphere, the origins and evolution of which are still not well understood. Its primary (greater than 90%) component is nitrogen, with a few percent methane and lesser amounts of other species. Methane and ethane are stable in the liquid state under the temperature and pressure conditions in Titan s lower atmosphere and at the surface; indeed, clouds, likely composed of methane, have been detected. Photochemical processes acting in the atmosphere convert methane into more complex hydrocarbons, creating Titan s haze and destroying methane over relatively short timescales. Therefore, it has been hypothesized that Titan s surface has reservoirs of liquid methane which serve to resupply the atmosphere. Early observations of Titan s surface revealed albedo patterns which have been interpreted as dark hydrocarbon liquids occupying topographically low regions between higher-standing exposures of bright, water-ice bedrock, although this is far from being the only explanation for the observed albedo contrast. Observations made by the Imaging Science Subsystem during Cassini's approach to Saturn and its first encounters with Titan show the bright and dark regions in greater detail but have yet to resolve the question of whether there are liquids on the surface.

Turtle, E. P.↗

NASA NTRS2006

Eta Carinae and the Homunculus: An Astrophysical Laboratory

High spatial resolution spectroscopy with HST/STIS between 1998.0 and 2004.2 has provided much exciting information about the central binary system and the physics of its N-rich, C,O-poor ejecta. Stellar He I profiles, noticeably blue-shifted relative to P Cygni H and Fe II line profiles, originate from the ionized wind region between two massive companions. Changes in profiles of He I singlet and triplet lines provide clues to the excitation mechanisms involved as the hot, UV companion moves in its highly eccentric orbit. For 90% of the 5.54-year period, the spectra of nearby Weigelt blobs and the Little Homunculus include highly excited emission lines of Ar, Ne, and Fe. During the few month-long spectroscopic minimum, these systems are deprived of Lyman continuum. Recombination, plus cooling, occurs. In the skirt region between the bipolar Homunculus, a neutral emission region, devoid of hydrogen emission, glows in Ti II, Fe I, Sr II, Sc II, etc. We find the ejecta to have Ti/Ni abundances nearly 100 times solar, not due to nuclear processing, but due to lack of oxygen. Many metals normally tied up in interstellar dust remain in gaseous phase. Much information is being obtained on the physical processes in these warm N-rich gases, whose excitation varies with time in a predictable pattern. Indeed recent GRB high dispersion spectra include signatures of circumGRB warm gases. This indicates that the early, primordial massive stars have warm massive ejecta reminiscent to that around Eta Carinae.

Gull, Theodore R.↗

NASA NTRSDate not supplied

Ultrapure Water System at JSC for High Purity Cleaning of Flight Hardware, Astromaterial Handling Tools and Solar Wind Samples

Use of Ultrapure Water (UPW) for cleaning of astromaterial sample handling tools and containers was driven by the discontinuation of Freon 113 as a cleaning solvent, due to environmental concerns. Freon 113, recycled using distillation, was very effective at removing organic residues from sample handling hardware. The initial switch to high purity water for astromaterial tool cleaning was modeled after efforts at White Sands Test Facility (WSTF) and current semiconductor UPW production practices in the early 1990s. JSC curation’s first system was comprised of ion exchange polishing cylinders, 55 gallon PVDF-lined storage tank, a few tens of feet of PVDF piping, UV and particle filtration, and this system supported cleaning for lunar, meteorite and Cosmic Dust collectors lab operations. By 2000 a major expansion and upgrade was providing UPW of quality E-1 (ASTM D5127-90) or better at 10 gpm for cleaning of the Genesis solar wind payload for flight, in addition to sample handling tools for other astromaterials. This expansion included a 1000 gallon storage tank and several hundred feet of PVDF piping located in B. 31 and 31N. An extra reverse osmosis process unit was added to incoming water in 2005. Subsequently several major components were replaced, and in anticipation of adding new labs, an enlarged UPW system was designed in 2018 and completed in 2019. This system produces grade E1.1 UPW at 15 gpm in a continuous 1100 ft. loop with 5000 gal. storage tank, supplying 8 laboratories.

Ultrapure water↗

NASA NTRS2009

Production of Solar Cells in Space from Non Specific Ores by Utilization of Electronically Enhanced Sputtering

An ideal method of construction in space would utilize some form of the Universal Differentiator and Universal Constructor as described by Von Neumann (1). The Universal Differentiator is an idealized non ore specific extractive device which is capable of breaking any ore into its constituent elements, and the Universal Constructor can utilize these elements to build any device with controllability to the nanometer scale. During the Human Exploration Initiative program in the early 1990s a conceptual study was done (2) to understand whether such devices were feasible with near term technology for the utilization of space resources and energy. A candidate system was proposed which would utilize electronically enhanced sputtering as the differentiator. Highly ionized ions would be accelerated to a kinetic energy at which the interaction between them and the lattice elections in the ore would be at a maximum. Experiments have shown that the maximum disintegration of raw material occurs at an ion kinetic energy of about 5 MeV, regardless of the composition and structure of the raw material. Devices that could produce charged ion beams in this energy range in space were being tested in the early 1990s. At this energy, for example an ion in a beam of fluorine ions yields about 8 uranium ions from uranium fluoride, 1,400 hydrogen and oxygen atoms from ice, or 7,000 atoms from sulfur dioxide ice. The ions from the disintegrated ore would then be driven by an electrical field into a discriminator in the form of a mass spectrometer, where the magnetic field would divert the ions into collectors for future use or used directly in molecular beam construction techniques. The process would require 10-7 Torr vacuum which would be available in space or on the moon. If the process were used to make thin film silicon solar cells (ignoring any energy inefficiency for beam production), then energy break even for solar cells in space would occur after 14 days.

Curreri, Peter A.↗

NASA NTRS2008

The Origin of the Terra Meridiani Sediments: Volatile Transport and the Formation of Sulfate Bearing Layered Deposits on Mars

The chemistry, sedimentology, and geology of the Meridiani sedimentary deposits are best explained by eolian reworking of the sublimation residue of a large scale ice/dust deposit. This large ice deposit was located in close proximity to Terra Meridiani and incorporated large amounts of dust, sand, and SO2 aerosols generated by impacts and volcanism during early martian history. Sulfate formation and chemical weathering of the initial igneous material is hypothesized to have occurred inside of the ice when the darker mineral grains were heated by solar radiant energy. This created conditions in which small films of liquid water were created in and around the mineral grains. This water dissolved the SO2 and reacted with the mineral grains forming an acidic environment under low water/rock conditions. Subsequent sublimation of this ice deposit left behind large amounts of weathered sublimation residue which became the source material for the eolian process that deposited the Terra Meridiani deposit. The following features of the Meridiani sediments are best explained by this model: The large scale of the deposit, its mineralogic similarity across large distances, the cation-conservative nature of the weathering processes, the presence of acidic groundwaters on a basaltic planet, the accumulation of a thick sedimentary sequence outside of a topographic basin, and the low water/rock ratio needed to explain the presence of very soluble minerals and elements in the deposit. Remote sensing studies have linked the Meridiani deposits to a number of other martian surface features through mineralogic similarities, geomorphic similarities, and regional associations. These include layered deposits in Arabia Terra, interior layered deposits in the Valles Marineris system, southern Elysium/Aeolis, Amazonis Planitia, and the Hellas basin, Aram Chaos, Aureum Chaos, and Ioni Chaos. The common properties shared by these deposits suggest that all of these deposits share a common formation process which must have acted over a large area of Mars. The results of this study suggest a mechanism for volatile transport on Mars without invoking an early greenhouse. They also imply a common formation mechanism for most of the sulfate minerals and layered deposits on Mars, which explains their common occurrence.

Niles, P.B.↗

NASA NTRS1984

Review of solar fuel-producing quantum conversion processes

The status and potential of fuel-producing solar photochemical processes are discussed. Research focused on splitting water to produce dihydrogen and is at a relatively early stage of development. Current emphasis is primarily directed toward understanding the basic chemistry underlying such quantum conversion processes. Theoretical analyses by various investigators predict a limiting thermodynamic efficiency of 31% for devices with a single photosystem operating with unfocused sunlight at 300 K. When non-idealities are included, it appears unlikely that actual devices will have efficiencies greater than 12 to 15%. Observed efficiencies are well below theoretical limits. Cyclic homogeneous photochemical processes for splitting water have efficiencies considerably less than 1%. Efficiency can be significantly increased by addition of a sacrificial reagent; however, such systems are no longer cyclic and it is doubtful that they would be economical on a commercial scale. The observed efficiencies for photoelectrochemical processes are also low but such systems appear more promising than homogeneous photochemical systems. Operating and systems options, including operation at elevated temperature and hybrid and coupled quantum-thermal conversion processes, are also considered.

Peterson, D. B.↗

NASA NTRS1989

On the relationship between early solar activity and the evolution of terrestrial planet atmospheres

Mass fractionation during hydrodynamic escape of hydrogen-rich primordial atmospheres form Venus, earth, and Mars can account for most of the salient features of mass distributions in their present-day atmospheres. The principal assumptions and results of an escape-fractionation model for the evolution of terrestrial planet atmospheres from primary to final states are qualitatively described, with emphasis on the astrophysical conditions needed to enable the loss process. A substantial and rapidly declining flux of energetic solar radiation into atmospheric exospheres is required, initially (at solar ages of about 1-10 million years) two to three orders of magnitude more intense than that supplied by extreme-ultraviolet emission from the contemporary sun. The solar accretion disk must have dissipated if such radiation is to penetrate the system midplane to planetray distances. On both criteria, hydrodynamic escape from planets appears plausible in the astrophysical environment of the naked T-Tauri stars.

Repin, Robert O.↗

DOE OSTI2025

Low-cost buffer storage for solar industrial steam applications

Motivation and importance: Many industrial process heat consumers operate throughout the day, and deep decarbonization with solar energy requires thermal energy storage. Thermal energy storage provides an additional operational benefit of firm delivery of steam – essential to reducing the risk of costly production interruptions. The group of process heat consumers that use steam for biofuels production for the California transportation fuels market is incentivized through the Low Carbon Fuel Standard (LCFS) to reduce their carbon intensity through the use of solar steam. Examples include ethanol and dimethyl ether production. The production of these and other fuels involves distillation driven by steam reboilers with steam pressures in the range 100-280 psig. These pressures can be delivered from the type of thermal energy storage that has been the focus of this project – a steam accumulator Sunvapor, Inc. (SVI) calls a “Bullet Steam Accumulator” or “BSA TM ”. Our project adds to the understanding of the design and integration of steam accumulators charged by solar thermal energy in a biofuels production facility, and similar facilities that consume process steam. The fuel application requires a demanding level of Process Safety Management not found in other steam applications. The type of steam accumulator SVI engineered and built integrates steam generation and storage in one vessel to reduce cost. Achieving a first of a kind permit to operate such a first device has also added to the understanding of the industrial application of such systems. Goals: The overall goal of the project has been to demonstrate the advantages that a “Bullet Steam Accumulator” (BSA™) can provide to solar steam integration with a manufacturing process. The industrial host has already been convinced of the potential of the available solar steam to lower than carbon intensity score. They have been interviewed for a number of publications such as that tout the advantages SVI’s system brings to their operations. Accomplishments: At the end of 2023 Sunvapor placed in service the country’s first industrial solar boiler with thermal energy storage. At the same time, this placement in service represents the first pilot commercial system to decarbonize biofuels production through the use of solar thermal energy. While the full technical effectiveness will be shown as soon as the customer’s plant is able to consume the available steam, the economic feasibility was indicated early in the project when the combination of costs and steam pricing required to meet investor expectations was determined. The project represents a reference pilot from which a full-scale commercial system may be expanded. This pilot is a necessary first step in providing the full potential benefits to the public, including decarbonization of transportation fuels. The decarbonization of the separation steps in fuels production may be the most cost-effective and nearest term solar fuel. Co-benefits include a reduction of air pollutants such as NOx and particulate matter, and job creation for the construction, operation and maintenance of industrial solar facilities.

14 SOLAR ENERGY↗

NASA NTRSDate not supplied

Results of the Preliminary Analyses of Asteroid Ryugu Regolith Samples Returned by the Hayabusa2 Mission

The Hayabusa2 spacecraft returned 5.5g of regolith material from asteroid 162173 Ryugu in December 2021. The samples were maintained in near-vacuum conditions up to and even during many analyses, a factor that was critical for comparisons of Ryugu lithologies to meteorites because of ubiquitous terrestrial alteration of the latter. Observations of asteroid Ryugu by the Hayabusa2 spacecraft found that it is spinning, top-shaped rubble pile, formed from re-accretion of a (probably) small subset of fragments from a disrupted parent asteroid. Samples retrieved from Ryugu by the spacecraft during two brief touchdowns were expected to contain a record of this history, including the formation and early evolution of the parent body, its subsequent impact destruction and partial re-accretion, and later space weathering. The composition of Ryugu was expected to be similar to that of naturally-heated Ivuna-type carbonaceous chondrite meteorites (CI chondrites), based on ground- and spacecraft-based spectroscopy. Six preliminary examination teams investigated the formation history of Ryugu through laboratory analysis of the returned samples over the past 18 months. Specifically, we sought to determine (1) when and where in the Solar System the parent asteroid of Ryugu formed; (2) the original mineralogy, bulk elemental abundances, and chemical compositions of the accreted materials; (3) how these materials evolved through chemical and physical processing of the parent asteroid; and (4) how the parent asteroid was disrupted during impact and reaccumulated into Ryugu. This brief report mainly summarizes results from the mineralogy and petrology subteams, although results of the composition and isotope subteams are also mentioned. To address these issues, we analyzed numerous Ryugu particles up to ~8 mm in size.

Michael Zolensky↗

NASA NTRS2008

Oxygen and Metals Processing on the Moon: Will Materials Science Change Our Future in Space?

As part of an In-Situ Resource Utilization infrastructure on the lunar surface, the production of oxygen and metals by various technologies is under development within NASA projects. Such an effort reflects the ambition to change paradigms in space exploration to enable human presence for the long-term. Sustaining such presence involves the acceptance of a new concept in space activities; crews must be able to generate some of their consumables from local resources. The balance between accepting early development risks and reducing long-term mission risks is at the core of the technology development approach. We will present an overview of the technologies involved and present their possible impact on the future of human expansion in the solar system.

Sibille, Laurent↗

NASA NTRS1999

The Return of Astromaterials to Earth Over the Next Decade

We are entering a new and golden age of sample return missions. In the coming decade we will harvest samples from Comet P/Wild II and interstellar dust courtesy of the STARDUST Mission (Brownlee et al., 1997), an asteroid (probably 4660 Nereus or 1989ML) by the ISAS MUSES-C Mission (ISAS, 1997), and solar wind by the Genesis Mission. A sample return from Mars is also envisioned as early as 2008, and possibly one from the two moons of Mars. It is, however, sobering to realize that MUSES-C aims to return 3-10 g of sample, STARDUST will provide micrograms of comet and interstellar dust, and Genesis will harvest only few micrograms of atoms. The diminutive size of the returning samples may be a source of concern for petrologists used only to looking at hefty lunar rocks and meteorites. How much sample is really needed to achieve prime science objectives, while maintaining a cost effective mission? The range of geological processes that we will want to address with these samples is staggering, encompassing not merely the entire history of the Solar system, but the history of the elements themselves. The interstellar processes include element formation, production and interactions with radiation, formation of organics, grain condensation and evolution, and interactions with magnetic fields. In the pre-accretionary (nebular) environment we wish to understand grain condensation, evaporation and recondensation, shock, radiation processing, solar energetic particle implantation, gas composition, the magnetic environment, and the evolution of organics. Finally, for solid bodies we wish to examine accretion history, shock, brecciation, impact gardening, metamorphism, aqueous alteration, weathering, exposure history, volcanism, fumarolic activity, differentiation, the magnetic environment, atmosphere evolution, and the evolution of organics. Since 1981, NASA has supported asteroid and comet science by collecting dust grains from these bodies in the stratosphere, and making them available for analysis in laboratories worldwide (Warren and Zolensky, 1994). Over the succeeding 17 years, many new techniques have been developed for these painstaking analyses, by at least 24 different laboratories across the globe. Despite the fact that the particle supply has always exceeded the demand, the painstaking efforts required for most of the nano-scale analyses have resulted in only 1520 grains having been analyzed, with a total mass of only 0.52 micrograms. Thus we really require less sample for analysis than one might imagine.

Zolensky, Michael E.↗

NASA NTRS2010

Curation of Antarctic Meteorites at NASA Johnson Space Center

The U.S. Antarctic meteorite program began in the 1970 s and has provided more than 18,000 samples in over three decades. The program is based on a three agency agreement between NASA, the National Science Foundation, and the Smithsonian Institution. The collection, stored at the Johnson Space Center and the Smithsonian, is one of the largest collections of meteorites in the world and features samples from the moon and Mars, asteroids, and material from the early solar system. A brief consideration of the collection shows that it contains 92.2% ordinary chondrites, 3.2% carbonaceous chondrites, 3.7% achondrites (1.7% HED), as well as many puzzling ungrouped meteorites. JSC has sent splits of nearly 20,000 meteorite samples to more than 500 scientists around the world since 1977. After the meteorites are collected in Antarctica, they are shipped frozen to JSC in Houston, usually arriving in April following the field season. The Astromaterials Curation Office at JSC is responsible for: - receiving the frozen meteorites. - staging: repackaging and changing the samples field identification numbers with official names. - submitting the names to the Nomenclature Committee of the Meteoritical Society for approval as new meteorites. - initial processing: weighing, measuring, describing and photographing the sample and providing a chip for classification to the Smithsonian Institution staff. - the issuing of two newsletters per year, announcing hundreds of new meteorites. - the handling of requests from the scientific community and the allocation of those requests that are approved. - providing supplies and tools for the field team such as teflon bags and tape, aluminum foil, clean tweezers and tongs. - maintaining the meteorite database with more than 76,000 sample splits. - making petrographic thin and thick sections for the JSC library and scientific investigators. - providing storage and handling of the meteorites in a class 10,000 clean room. Samples that have not been requested for three years are sent to the Smithsonian for permanent storage. There have been several seasons in recent years with two field teams, increasing the number of acquired samples (>1000 in a few seasons). We have recently increased our storage space and additional staff to better serve the scientific community.

McBride, K. M.↗

DOE OSTI2025

Queued Up: 2025 Edition – Characteristics of Power Plants Seeking Transmission Interconnection As of the End of 2024 [Slides]

Electric transmission system operators (ISOs, RTOs, or utilities) require proposed power plants seeking to connect to the transmission grid to undergo a series of impact studies before they can be built. This process establishes what new transmission equipment or upgrades may be needed before a project can connect to the system and assigns the costs of that equipment. The lists of projects in this process are known as “interconnection queues”. In collaboration with interconnection.fyi, Berkeley Lab compiled, aggregated, and cleaned interconnection queue data from >50 transmission grid operators (7 ISO/RTOs and 49 non-ISO balancing areas), which collectively represent ~97% of currently installed U.S. electric generating capacity. The dataset includes requests submitted to queues through the end of 2024, and only includes requests seeking to connect to the transmission grid (not distribution-connected or behind-the-meter projects). The files below include both a PDF report and an Excel data file. The PDF report analyzes interconnection data and metrics through the end of 2024. The Excel data file includes (a) the full project-level interconnection queue dataset through 2024, (b) a codebook (data dictionary) describing each data field, and (c) 35 additional tabs featuring tables summarizing a range of interconnection metrics. Key highlights from the Queued Up: 2025 Edition (featuring data through 2024) include: • As of the end of 2024, there were ~10,300 projects actively seeking grid interconnection in the U.S., representing 1,400 GW of generation and approximately 890 GW of storage. • Historic withdrawal rates alongside relatively fewer new requests resulted in a 12% decrease in total active queue volume compared to the prior year. • Active natural gas capacity (136 GW, +72% year-over-year) increased in 2024, while solar (956 GW, -12%), storage (890 GW, -13%), and wind (271 GW, -26%) capacity decreased. • 408 GW of capacity already has a draft or executed interconnection agreement (IA) but has not yet reached commercial operations. • The time projects spend in queues before reaching COD is increasing. For the regions with available data, the median duration from IR to COD has doubled from <2 years for projects built in 2000-2007 to over 4 years for those built in 2018-2024. • Ultimately, most of this proposed capacity will not be built. Only 13% of capacity that submitted interconnection requests from 2000-2019 had reached commercial operations by the end of 2024; 77% of that capacity had been withdrawn and 10% was still active. • FERC Order 2023 and various other reforms are being implemented. These are important measures to reduce interconnection bottlenecks and enhance grid system reliability, but it is too early to measure and assess their full impact. • New additions for the 2025 edition include: (a) additional detail on data processing and gaps; (b) updates on interconnection reforms; (c) new analysis on interconnection agreements, and more.

24 POWER TRANSMISSION AND DISTRIBUTION↗