Search NASA⌕ Search

SEARCH · Search NASA

Results for “eigenvalue problems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Linear and weakly nonlinear aspects of free shear layer instability, roll-up, subharmonic interaction and wall influence

The growth of the momentum thickness and the modal disturbance energies are examined to study the nature and onset of nonlinearity in a temporally growing free shear layer. A shooting technique is used to find solutions to the linearized eigenvalue problem, and pseudospectral weakly nonlinear simulations of this flow are obtained for comparison. The roll-up of a fundamental disturbance follows linear theory predictions even with a 20 percent disturbance amplitude. A weak nonlinear interaction of the disturbance creates a finite-amplitude mean shear stress which dominates the growth of the layer momentum thickness, and the disturbance growth rate changes until the fundamental disturbance dominates. The fundamental then becomes an energy source for the harmonic, resulting in an increase in the growth rate of the subharmonic over the linear prediction even when the fundamental has no energy to give. Also considered are phase relations and the wall influence.

Cain, A. B.↗
NASA NTRS1986

On the screech tones of supersonic rectangular jets

The shock cell structure and screech tone frequencies of nonaxisymmetric supersonic jets are examined. A linear shock cell model that utilizes a vortex sheet as the mixing layer of the jet is developed in order to estimate the characteristics of the shock structures and tone frequencies. Eigenvalue problems for rectangular and elliptical jets are solved, and shock cell structure solutions for the jets are derived. The shock cell spacings calculated with the model are compared to the data of Powell (1953) and Hammitt (1961); good correlation is obtained over a wide range of Mach numbers. The shock cell spacing formula is applied to the computation of screech tone frequencies of rectangular jets. It is observed that the calculated frequencies agree with the measurements of Powell and Krothapalli et. al. (1986) for the Mach number range 1.15-1.80.

Tam, C. K. W.↗
NASA NTRS1987

Control of SCOLE

A relatively low order model is used to control SCOLE. Drastic truncation of the discretized model is proposed by means of a modal expansion. An open loop eigenvalue problem is illustrated as is truncated modal equations, modal state equations, actual output vector and modal Kalman filter. Also illustrated is independent modal-space control.

Meirovitch, L.↗
NASA NTRS1987

Vortex breakdown simulation based on a nonlinear inviscid model

It is shown that the inviscid equations governing steady axisymmetric flow with swirl, admit solutions with closed streamlines. Results are obtained using two different numerical algorithms. The first is based on a multigrid method for nonlinear eigenvalue problems, while the second is based on a least squares formulation.

Hafez, M. M.↗
NASA NTRS1985

Implementation of design sensitivity analysis with existing finite element codes

A numerical method is presented to implement structural design sensitivity analysis theory, using the versatility and convenience of existing finite element structural analysis programs. Design variables such as thickness and cross-sectional areas of components of individual members and built-up structures are considered. Structural performance functionals considered include displacement and stress. The method is also applicable for eigenvalue problem design sensitivity analysis. It is shown that calculations can be carried out outside existing finite element codes, using postprocessing data only. Thus, design sensitivity analysis software does not have to be embedded in an existing finite element code. Feasability of the method is shown through analysis of several problems, including a built-up structure. Accurate design sensitivity results are obtained without the uncertainty of numerical accuracy associated with selection of finite difference perturbations.

Choi, Kyung K.↗
NASA NTRS1987

Stability of viscous flow past a circular cylinder

A spectral method which employs trigonometric functions and Chebyshev polynomials is used to compute the steady, incompressible laminar flow past a circular cylinder. Linear stability methods are used to formulate a pair of decoupled generalized eigenvalue problems for the growth of symmetric and asymmetric (about the dividing streamline) perturbations. It is shown that, while the symmetric disturbances are stable, the asymmetric perturbations become unstable at a Reynolds number about 40 with a Strouhal number about 0.12. The critical conditions are found to depend on the size of the computational domain in a manner similar to that observed in the laboratory.

Zebib, A.↗
NASA NTRS1987

On the acceleration of charged particles at relativistic shock fronts

The diffusive acceleration of highly relativistic particles at a shock is reconsidered. Using the same physical assumptions as Blandford and Ostriker (1978), but dropping the restriction to nonrelativistic shock velocities, the authors find approximate solutions of the particle kinetic equation by generalizing the diffusion approximation to higher order terms in the anisotropy of the particle distribution. The general solution of the transport equation on either side of the shock is constructed, which involves the solution of an eigenvalue problem. By matching the two solutions at the shock, the spectral index of the resulting power law is found by taking into account a sufficiently large number of eigenfunctions. Low-order truncation corresponds to the standard diffusion approximation and to a somewhat more general method described by Peacock (1981). In addition to the energy spectrum, the method yields the angular distribution of the particles and its spatial dependence.

Kirk, J. G.↗
NASA NTRS1988

Vibration and Control of Flexible Rotor Supported by Magnetic Bearings

Active vibration control of flexible rotors supported by magnetic bearings is discussed. Using a finite-element method for a mathematical model of the flexible rotor, the eigenvalue problem is formulated taking into account the interaction between a mechanical system of the flexible rotor and an electrical system of the magnetic bearings and the controller. However, for the sake of simplicity, gyroscopic effects are disregarded. It is possible to adapt this formulation to a general flexible rotor-magnetic bearing system. Controllability with and without collocation sensors and actuators located at the same distance along the rotor axis is discussed for the higher order flexible modes of the test rig. In conclusion, it is proposed that it is necessary to add new active control loops for the higher flexible modes even in the case of collocation. Then it is possible to stabilize for the case of uncollocation by means of this method.

Nonami, Kenzou↗
NASA NTRS1987

Vibration analysis of quasi-symmetric structures

A computational technique is developed to reduce the size of the dynamical model of a large complex quasi-symmetric structure prior to free vibration analysis. The structure is discretized using a two-field mixed FEM model; the response vectors are decomposed into symmetric and antisymmetric components; the eigenvectors of the quasi-symmetric structure are approximated by a linear combination of a few preselected sets of symmetric and antisymmetric modes generated by the reduced-size model; global approximation vectors are selected and generated; and the resulting eigenvalue problem is significantly reduced via a classical Bubnov-Galerkin procedure. Numerical results for a shallow laminated anisotropic panel of quadrilateral planform are presented in extensive tables and graphs, demonstrating the effectiveness of the method.

Noor, Ahmed K.↗
NASA NTRS1988

The optimal polarizations for achieving maximum contrast in radar images

There is considerable interest in determining the optimal polarizations that maximize contrast between two scattering classes in polarimetric radar images. A systematic approach is presented for obtaining the optimal polarimetric matched filter, i.e., that filter which produces maximum contrast between two scattering classes. The maximization procedure involves solving an eigenvalue problem where the eigenvector corresponding to the maximum contrast ratio is an optimal polarimetric matched filter. To exhibit the physical significance of this filter, it is transformed into its associated transmitting and receiving polarization states, written in terms of horizontal and vertical vector components. For the special case where the transmitting polarization is fixed, the receiving polarization which maximizes the contrast ratio is also obtained. Polarimetric filtering is then applies to synthetic aperture radar images obtained from the Jet Propulsion Laboratory. It is shown, both numerically and through the use of radar imagery, that maximum image contrast can be realized when data is processed with the optimal polarimeter matched filter.

Swartz, A. A.↗
NASA NTRS1989

Computation of canonical correlation and best predictable aspect of future for time series

The canonical correlation between the (infinite) past and future of a stationary time series is shown to be the limit of the canonical correlation between the (infinite) past and (finite) future, and computation of the latter is reduced to a (generalized) eigenvalue problem involving (finite) matrices. This provides a convenient and essentially, finite-dimensional algorithm for computing canonical correlations and components of a time series. An upper bound is conjectured for the largest canonical correlation.

Pourahmadi, Mohsen↗
NASA NTRS1989

The inviscid axisymmetric stability of the supersonic flow along a circular cylinder

The supersonic flow past a thin straight circular cylinder is investigated. The associated boundary layer flow (i.e., the velocity and temperature field) is computed; the asymptotic, far downstream solution is obtained, and compared with the full numerical results. The inviscid, linear, axisymmetric (temporal) stability of this boundary layer is also studied. A so called doubly generalized inflexion condition is derived, which is a condition for the existence of so called subsonic neutral modes. The eigenvalue problem (for the complex wavespeed) is computed for two freestream Mach numbers (2.8 and 3.8), and this reveals that curvature has a profound effect on the stability of the flow. The first unstable inviscid mode is seen to rapidly disappear as curvature is introduced, while the second (and generally the most important) mode suffers a substantially reduced amplification rate.

Duck, Peter W.↗
NASA NTRS1989

Bunch-Kaufman factorization for real symmetric indefinite banded matrices

The Bunch-Kaufman algorithm for factoring symmetric indefinite matrices was rejected for banded matrices because it destroys the banded structure of the matrix. Herein, it is shown that for a subclass of real symmetric matrices which arise in solving the generalized eigenvalue problem using Lanczos's method, the Bunch-Kaufman algorithm does not result in major destruction of the bandwidth. Space time complexities of the algorithm are given and used to show that the Bunch-Kaufman algorithm is a significant improvement over LU factorization.

Jones, Mark T.↗
NASA NTRS1989

Algorithms and software for solving finite element equations on serial and parallel architectures

Over the past 15 years numerous new techniques have been developed for solving systems of equations and eigenvalue problems arising in finite element computations. A package called SPARSPAK has been developed by the author and his co-workers which exploits these new methods. The broad objective of this research project is to incorporate some of this software in the Computational Structural Mechanics (CSM) testbed, and to extend the techniques for use on multiprocessor architectures.

George, Alan↗
NASA NTRS1988

Optimal polarizations for achieving maximum contrast in radar images

A systematic approach is presented for obtaining the optimal polarimetric matched filter, which produces maximum contrast between two scattering classes in polarimetric radar images. The maximization procedure involves solving an eigenvalue problem when the eigenvector corresponding to the maximum contrast ratio is optimal polarimetric matched filter. It is shown how to realize the filter in terms of an equivalent transmitting and receiving polarization pair. The case where the radar transmitting polarization state is fixed is addressed. Here, the receiving polarization state is optimized so that the maximum constrast ratio is attained under this constraint.

Swartz, A. A.↗
NASA NTRS1989

Numerical simulation of pressure oscillations in a ramjet combustor

Large-eddy simulations of compressible cold flow in a ramjet combustor configuration were performed. The objectives were to investigate the mechanisms for vortex-acoustic interaction in such a device and to develop a simulation method that can be extended to cases with combustion heat release to study combustion instability. From the simulation, it was found that the separated shear layer rolls up into concentrated vortices that merge to form large coherent structures. These vortices interact with the choked nozzle downstream to produce an axial acoustic dipole. The spectrum of the pressure fluctuation at the base of the backward-facing step shows that there are two types of oscillations: an acoustic resonant mode and a vortex-acoustic coupled mode. Based on the flow physics observed in the simulations, a simple one-dimensional model for the vortex-acoustic coupled mode was proposed. The eigenvalue problem based on this model was solved to obtain the frequency of the coupled mode.

Jou, Wen-Huei↗
NASA NTRS1990

Dynamic substructuring by the boundary flexibility vector method of component mode synthesis

Component mode synthesis (CMS) is a method of dynamic analysis, for structures having a large number of degrees of freedom (DOF). These structures often required lengthy computer CPU time and large computer memory resources, if solved directly by the finite-element method (FEM). In CMS, the structure is divided into independent components in which the DOF are defined by a set of generalized coordinates defined by displacement shapes. The number of the generalized coordinates are much less than the original number of physical DOF, in the component. The displacement shapes are used to transform the component property matrices and any applied external loads, to a reduced system of coordinates. Reduced system property matrices are assembled, and any type of dynamic analysis is carried out in the reduced coordinate system. Any obtained results are back transformed to the original component coordinate systems. In all conventional methods of CMS, the mode shapes used for components are dynamic mode shapes, supplemented by static deflected shapes. Historically, all the dynamic mode shapes used in conventional CMS are the natural modes (eigenvectors) of components. A new method of CMS, namely the boundary flexibility vector method of CMS, is presented. The method provides for the incorporation of a set of static Ritz vectors, referred to as boundary flexibility vectors, as a replacement and/or supplement to conventional eigenvectors, as displacement shapes for components. The generation of these vectors does not require the solution of a costly eigenvalue problem, as in the case of natural modes in conventional CMS, and hence a substantial saving in CPU time can be achieved. The boundary flexibility vectors are generated from flexibility (or stiffness) properties of components. The formulation presented is for both free and fixed-interface components, and for both the free and forced vibration problems. Free and forced vibration numerical examples are presented to verify the accuracy of the method and the saving in CPU time. Compared to conventional methods of CMS, the results indicate that by using the new method, more accurate results can be obtained with a substantial saving in CPU time.

Abdallah, Ayman Ahmed↗
NASA NTRS1990

The inviscid axisymmetric stability of the supersonic flow along a circular cylinder

The supersonic flow past a thin straight circular cylinder is investigated. The associated boundary-layer flow (i.e. the velocity and temperature field) is computed; the asymptotic, far downstream solution is obtained, and compared with the full numerical results. The inviscid, linear, axisymmetric (temporal) stability of this boundary layer is also studied. A so-called 'doubly generalized' inflexion condition is derived, which is a condition for the existence of so-called 'subsonic' neutral modes. The eigenvalue problem (for the complex wavespeed) is computed for two free-stream Mach numbers (2.8 and 3.8), and this reveals that curvature has a profound effect on the stability of the flow. The first unstable inviscid mode is seen to disappear rapidly as curvature is introduced, while the second (and generally the most important) mode suffers a substantially reduced amplification rate.

Duck, Peter W.↗