Search NASA⌕ Search

SEARCH · Search NASA

Results for “elastic shells”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

In Search of Stronger/Cheaper Chitin Nanofibers through Electrospinning of Chitin–Cellulose Composites Using an Ionic Liquid Platform

The ability of the ionic liquid (IL) 1-ethyl-3-methylimidazolium acetate ([C 2 mim][OAc]) to solubilize natural biopolymers (e.g., chitin and cellulose) without any chemical modification has been used to develop a one-pot process to prepare a spinning dope by extracting chitin from shrimp shell, codissolving microcrystalline cellulose (MCC, DP = 270), and electrospinning nanomats from shrimp shell-extract/MCC solutions. The resulting spinning dopes were prepared with optimal viscosity of 380 to 900 cP, and conductivity and surface tension of ~2.8 mS/cm and ~36 dyn/cm, respectively; however, nanofibers could only be prepared when the chitin/MCC ratios in SS-extract/ MCC solution were between 9/1 and 6/4. Compared to nanomats electrospun from shrimp shell-extract solution, 7/3 chitin/MCC composite nanomats demonstrated a 2-fold improvement in hardness and 3-fold improvement in elasticity, although further increases in MCC content resulted in lowering both parameters which nonetheless were higher than the pure chitin nanomats. We conclude this one pot process for preparing spinning dopes directly from shrimp shell-extract is a viable method to prepare chitin/MCC composites of improved strength/elasticity at lower costs.

36 MATERIALS SCIENCE↗

Elastic and Plastic Stability of Orthotropic Cylinders

By utilizing linear stability theory, solutions for elastic buckling of short and moderate length orthotropic cylinders under axial compression are presented and correlated with experimental results on circumferentially stiffened cylinders. The plastic buckling of short and moderate length isotropic and orthotropic cylinders is also investigated and the theoretical results correlated with available experimental data. A discussion of the effects of finite deflection and initial imperfection is presented in order to explain the correlation obtained between the theory and the experimental data.

ELASTIC BUCKLING↗

Passive seismic experiment

The network of seismometers installed by the Apollo 17 and other Apollo missions is described. The effects of the impacts of lunar modules and S-4B stages on the lunar surfaces are discussed. The information concerning lunar composition which is obtained by analyzing the seismic signals generated by moonquakes and meteoroid impacts are analyzed. It is concluded that the seismic activity within the moon is extremely low compared to that with the earth. The moon is characterized by a rigid, dynamically inactive outer shell, approximately 1000 kilometers thick, surrounding a core that has markedly different elastic properties.

Latham, G. V.↗

Analysis of laminated composite shells under internal pressure

A closed form solution is presented that predicts the response of filament wound composite shells subjected to internal pressure. The material of the shell is assumed to be general cylindrically anisotropic. Based on the theory of cylindrical anisotropic elasticity coupled differential equations are developed using Lekhnitskii's stress function approach. Two composite systems, graphite/epoxy and glass/epoxy, are selected to demonstrate the influence of degree of material anisotropy and fiber orientations on the axial and induced twisting deformation. Detailed stress distributions of (45) off-axis unidirectional and (45/-45)s symmetric angle-ply fiber-reinforced laminated shells are shown to illustrate the effect of radius-to-thickness ratio and stacking sequence.

Yuan, F. G.↗

Ab initio translationally invariant nucleon-nucleus optical potentials

We combine the ab initio symmetry-adapted no-core shell model (SA-NCSM) with the single-particle Green's function approach to construct optical potentials rooted in first principles. Specifically, we show that total cross sections and phase shifts for neutron elastic scattering from a 4 He target with projectile energies between 0.5 and 10 MeV closely reproduce the experiment. In addition, we discuss an important new development that resolves a long-standing issue with spurious center-of-mass motion in the Green's function formalism for many-body approaches. Furthermore, the new development opens a path for first-principle predictions of cross sections for elastic scattering of single-nucleon projectiles, nucleon capture, and deuteron breakup reactions, feasible for a broad range of open-shell spherical and deformed nuclei in the SA-NCSM approach.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Bi-functional nonlinearities in monodisperse ZnO nano-grains – Self-consistent transport and random lasing

We report a quantum field theoretical description of light transport and random lasing. The Bethe-Salpeter equation is solved including maximally crossed diagrams and non-elastic scattering. This is the first theoretical framework that combines so called off-shell scattering and lasing in random media. We present results for the self-consistent scattering mean free path that varies over the width of the sample. Further we discuss the density dependent correlation length of self-consistent transport in disordered media composed of semi-conductor Mie scatterers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermoelectric characteristic of the rough InN/GaN core-shell nanowires

An analysis to model the thermoelectric (TE) effects of the rough InN/GaN core-shell nanowires (NWs) with wire diameter ranging from 25 nm to 100 nm is proposed. The elastic continuum model is employed to calculate the phonon dispersion relation curves and the related phonon group velocity. Within the framework of Boltzmann transport equations and relaxation time approximation, the electrical conductivity, Seebeck coefficient, electronic thermal conductivity, and the lattice thermal conductivity is obtained. Simulation results indicate that TE properties of the rough InN/GaN core-shell NWs are strongly affected by the surface roughness and the diameter of NWs. The optimized condition of the proposed rough InN/GaN core-shell TE NWs is studied in this paper and the highest ZT obtained in the calculation is 0.8598 at 300 K and 1.713 at 1000 K.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Modeling of fracture of protective concrete structures under impact loads

This paper presents results of numerical simulation of interaction between a Boeing 747-400 aircraft and the protective shell of a nuclear power plant. The shell is presented as a complex multilayered cellular structure consisting of layers of concrete and fiber concrete bonded with steel trusses. Numerical simulation was performed three-dimensionally using the original algorithm and software taking into account algorithms for building grids of complex geometric objects and parallel computations. Dynamics of the stress-strain state and fracture of the structure were studied. Destruction is described using a two-stage model that allows taking into account anisotropy of elastic and strength properties of concrete and fiber concrete. It is shown that wave processes initiate destruction of the cellular shell structure; cells start to destruct in an unloading wave originating after the compression wave arrival at free cell surfaces.

36 MATERIALS SCIENCE↗

Accessing the Elastic Form-Factors of the $Delta(1232)$ Using the Beam-Normal Asymmetry

The beam-normal single-spin asymmetry, $B_n$, exists in the scattering of high energy electrons, polarized transverse to their direction of motion, from nuclear targets. To first order, this asymmetry is caused by the interference of the one-photon exchange amplitude with the imaginary part of the two-photon exchange amplitude. Measurements of $B_n$, for the production of a $\Delta(1232)$ resonance from a proton target, will soon become available from the Qweak experiment at Jefferson Lab and the A4 experiment at Mainz. The imaginary part of two-photon exchange allows only intermediate states that are on-shell, including the $\Delta$ itself. Therefore such data is sensitive to $\gamma\Delta\Delta$, the elastic form-factors of the $\Delta$. This article will introduce the form-factors of the $\Delta$, discuss what might be learned about the elastic form-factors from these new data, describe ongoing efforts in calculation and measurement, and outline the possibility of future measurements.

Dalton, Mark M.↗

Bubble nucleation and migration in a lead-iron hydr(oxide) core-shell nanoparticle

Iron hydroxide is found in a wide range of contexts ranging from biominerals to steel corrosion, and it can transform to anhydrous oxide via releasing O 2 gas and H 2 O. However, it is not well understood how gases transport through a crystal lattice. Here, we present in situ observation of the nucleation and migration of gas bubbles in iron (hydr)oxide using transmission electron microscopy. We create Pb–FeOOH model core–shell nanoparticles in a liquid cell. Under electron irradiation, iron hydroxide transforms to iron oxide, during which bubbles are generated, and they migrate through the shell to the nanoparticle surface. Geometric phase analysis of the shell lattice shows an inhomogeneous stain field at the bubbles. In conclusion, our modeling suggests that the elastic interaction between the core and the bubble provides a driving force for bubble migration.

36 MATERIALS SCIENCE↗

Time-dependent response of filamentary composite spherical pressure vessels

A filamentary composite spherical pressure vessel is modeled as a pseudoisotropic (or transversely isotropic) composite shell, with the effects of the liner and fill tubes omitted. Equations of elasticity, macromechanical and micromechanical formulations, and laminate properties are derived for the application of an internally pressured spherical composite vessel. Viscoelastic properties for the composite matrix are used to characterize time-dependent behavior. Using the maximum strain theory of failure, burst pressure and critical strain equations are formulated, solved in the Laplace domain with an associated elastic solution, and inverted back into the time domain using the method of collocation. Viscoelastic properties of HBFR-55 resin are experimentally determined and a Kevlar/HBFR-55 system is evaluated with a FORTRAN program. The computed reduction in burst pressure with respect to time indicates that the analysis employed may be used to predict the time-dependent response of a filamentary composite spherical pressure vessel.

Dozier, J. D.↗

A pressurized cylindrical shell with a fixed end which contains an axial part-through or through crack

A cylindrical shell having a very stiff and plate or a flange is considered. It is assumed that near the end the cylinder contains an axial flaw which may be modeled as a part through surface crack or a through crack. The effect of the end constraining on the stress intensity factor which is the main fracture mechanics parameter is studied. The applied loads acting on the cylinder are assumed to be axisymmetric. Thus the crack problem under consideration is symmetric with respect to the plane of the crack and consequently only the Mode 1 stress intensity factors are nonzero. With this limitation, the general perturbation problem for a cylinder with a built in end containing an axial crack is considered. Reissner's shell theory is used to formulate the problem. The part through crack problem is treated by using a line spring model. In the case of a crack tip terminating at the fixed end it is shown that the integral equations of the shell problem has the same generalized Cauchy kernel as the corresponding plane stress elasticity problem.

Yahsi, O. S.↗

A pressurized cylindrical shell with a fixed end which contains an axial part-through or through crack

In this paper a cylindrical shell having a very stiff end plate or a flange is considered. It is assumed that near the end the cylinder contains an axial flow which may be modeled as a part-through surface crack or through crack. The primary objective is to study the effect of the end constraining on the stress intensity factor which is the main fracture mechanics parameter. The applied loads acting on the cylinder are assumed to be axisymmetric. Thus the crack problem under consideration is symmetric with respect to the plane of the crack and consequently only the mode I stress intensity factors are nonzero. With this limitation, the general perturbation problem for a cylinder with a built-in end containing an axial crack is considered. Reissner's shell theory is used to formulate the problem. The part-through crack problem is treated by using a line-spring model. In the case of a crack tip terminating at the fixed end it is shown that the integral equation of the shell problem has the same generalized Cauchy kernel as the corresponding plane stress elasticity problem. Even though the problem is formulated for a general surface crack profile and arbitrary crack surface tractions, the numerical results are obtained only for a semielliptic part-through axial crack located at the inside or outside surface of the cylinder and for internal pressure acting on the cylinder. The stress intensity factors are calculated and presented for a relatively wide range of dimensionless length parameters of the problem.

Yahsi, O. S.↗

Theoretical Investigation of Thermo-Mechanical Behavior of Carbon Nanotube-Based Composites Using the Integral Transform Method

This project uses the integral transform technique to model the problem of nanotube behavior as an axially symmetric system of shells. Assuming that the nanotube behavior can be described by the equations of elasticity, we seek a stress function x which satisfies the biharmonic equation: del(exp 4) chi = [partial deriv(r(exp 2)) + partial deriv(r) + partial deriv(z(exp 2))] chi = 0. The method of integral transformations is used to transform the differential equation. The symmetry with respect to the z-axis indicates that we only need to consider the sine transform of the stress function: X(bar)(r,zeta) = integral(from 0 to infinity) chi(r,z)sin(zeta,z) dz.

Pawloski, Janice S.↗