Search NASA⌕ Search

SEARCH · Search NASA

Results for “element”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Accurate integration of geostationary orbits with Burdet's focal elements

The theory of Burdet's focal elements (1969) is outlined. The differential equations are presented, and the initial value problem is described together with the transformation to rectangular coordinates and classical elements. The focal elements are well defined for zero eccentricity and inclination and can be adopted for the computation of elliptic, parabolic, and hyperbolic motion. For the numerical integration of near-geostationary orbits, a comparison of the efficiency is made between focal elements, Kustaanheimo-Stiefel (1971) theory, and rectangular coordinates. For this class of orbits, a higher accuracy has been obtained by integrating elements than integrating rectangular coordinates.

Flury, W.↗
NASA NTRS1975

A general algorithm using finite element method for aerodynamic configurations at low speeds

A finite element algorithm for numerical simulation of two-dimensional, incompressible, viscous flows was developed. The Navier-Stokes equations are suitably modelled to facilitate direct solution for the essential flow parameters. A leap-frog time differencing and Galerkin minimization of these model equations yields the finite element algorithm. The finite elements are triangular with bicubic shape functions approximating the solution space. The finite element matrices are unsymmetrically banded to facilitate savings in storage. An unsymmetric L-U decomposition is performed on the finite element matrices to obtain the solution for the boundary value problem.

Balasubramanian, R.↗
NASA NTRS1976

The Relation of Finite Element and Finite Difference Methods

Finite element and finite difference methods are examined in order to bring out their relationship. It is shown that both methods use two types of discrete representations of continuous functions. They differ in that finite difference methods emphasize the discretization of independent variable, while finite element methods emphasize the discretization of dependent variable (referred to as functional approximations). An important point is that finite element methods use global piecewise functional approximations, while finite difference methods normally use local functional approximations. A general conclusion is that finite element methods are best designed to handle complex boundaries, while finite difference methods are superior for complex equations. It is also shown that finite volume difference methods possess many of the advantages attributed to finite element methods.

Vinokur, M.↗
NASA NTRS1976

Addition of higher order plate and shell elements into NASTRAN computer program

Two higher order plate elements, the linear strain triangular membrane element and the quintic bending element, along with a shallow shell element, suitable for inclusion into the NASTRAN (NASA Structural Analysis) program are described. Additions to the NASTRAN Theoretical Manual, Users' Manual, Programmers' Manual and the NASTRAN Demonstration Problem Manual, for inclusion of these elements into the NASTRAN program are also presented.

Narayanaswami, R.↗
NASA NTRS1976

Addition of higher order plate elements to NASTRAN

Two plate elements, the linear strain triangular membrane element CTRIM6 and the higher order plate bending element CTRPLT1, were added to NASTRAN Level 16.0. The theoretical formulation, programming details, and bulk data information pertaining to the addition of these elements are discussed. Sample problems illustrating the use of these elements are presented.

Narayanaswami, R.↗
NASA NTRS1977

UH cosmic rays and solar system material - The elements just beyond iron

The nucleosynthesis of cosmic-ray elements between the iron peak and the rare-earth region is examined, and compositional changes introduced by propagation in interstellar space are calculated. Theories on the origin of elements heavier than iron are reviewed, a supernova model of explosive nucleosynthesis is adopted for the ultraheavy (UH) cosmic rays, and computational results for different source distributions are compared with experimental data. It is shown that both the cosmic-ray data and the nucleosynthesis calculations are not yet of sufficient precision to pinpoint the processes occurring in cosmic-ray source regions, that the available data do provide boundary conditions for cosmic-ray nucleosynthesis, and that these limits may apply to the origin of elements in the solar system. Specifically, it is concluded that solar-system abundances appear to be consistent with a superposition of the massive-star core-helium-burning s-process plus explosive-carbon-burning synthesis for the elements from Cu to As and are explained adequately by the s- and r-processes for heavier elements.

Wefel, J. P.↗
NASA NTRS1977

Mixed isoparametric finite element models of laminated composite shells

Mixed shear-flexible isoparametric elements are presented for the stress and free vibration analysis of laminated composite shallow shells. Both triangular and quadrilateral elements are considered. The 'generalized' element stiffness, consistent mass, and consistent load coefficients are obtained by using a modified form of the Hellinger-Reissner mixed variational principle. Group-theoretic techniques are used in conjunction with computerized symbolic integration to obtain analytic expressions for the stiffness, mass and load coefficients. A procedure is outlined for efficiently handling the resulting system of algebraic equations. The accuracy of the mixed isoparametric elements developed is demonstrated by means of numerical examples, and their advantages over commonly used displacement elements are discussed.

Noor, A. K.↗
NASA NTRS1977

Finite element stress analysis of the human left ventricle whose irregular shape is developed from single plane cineangiocardiogram

The three-dimensional left ventricular chamber geometrical model is developed from single plane cineangiocardiogram. This left ventricular model is loaded by an internal pressure monitored by cardiac catheterization. The resulting stresses in the left ventricular model chamber's wall are determined by computerized finite element procedure. For the discretization of this left ventricular model structure, a 20-node, isoparametric finite element is employed. The analysis and formulation of the computerised procedure is presented in the paper, along with the detailed algorithms and computer programs. The procedure is applied to determine the stresses in a left ventricle at an instant, during systole. Next, a portion (represented by a finite element) of this left ventricular chamber is simulated as being infarcted by making its active-state modulus value equal to its passive-state value; the neighbouring elements are shown to relieve the 'infarcted' element of stress by themselves taking on more stress.

Ghista, D. N.↗
NASA NTRS1978

Trace elemental characteristics of aerosols emitted from municipal incinerators

As part of a continuing investigation of high temperature combustion aerosols, elemental composition of size differentiated aerosols emitted from a local municipal incinerator was studied. Aerosols were aerodynamically separated into eight diameter groups ranging from 0.43 mm to 20 mm, collected, and analyzed by charged particle induced X-ray emission technique. On line data collection and reduction codes generated aerial densities for elements from Na to U with sensitivities in the ng/cu m range for most elements. From the total weights of aerosols collected per stage, their size distribution was determined to be bimodal, with one group centered at a diameter of 0.54 mm and the other at a diameter of 5.6 mm. Measured elemental concentrations in various size ranges indicate that K and S show a strong tendency to concentrate on aerosol surfaces. A weaker trend for surface preference was also observed for Mn and Ni, but other elements show no such trend.

Singh, J. J.↗
NASA NTRS1978

Graphical evaluation of relativistic matrix elements

A graphical representation of angular momentum was used to evaluate relativistic matrix elements between antisymmetrized states of many particle configurations having any number of open shells. The antisymmetrized matrix element was expanded as a sum of semisymmetrized matrix elements. The diagram representing a semisymmetrized matrix element was composed of four diagram blocks; the bra block, the ket block, the spectator block, and the interaction block. The first three blocks indicate the couplings of the two interacting configurations while the last depends on the interaction and is the replaceable component. Interaction blocks for relativistic operators and commonly used potentials were summarized in ready to use forms. A simple step by step procedure was prescribed generally for calculating antisymmetrized matrix elements of one and two particle operators.

Huang, K. N.↗
NASA NTRS1977

Trace elements in the Allende meteorite. III - Coarse-grained inclusions revisited

Radiochemical neutron activation analytic determinations of several elements in coarse-grained inclusions of the Allende meteorite are reported. The condensation and fractionation behavior of these and other elements are described. Evidence was found for a post-accretion thermal event which redistributed some trace elements. The solar system ratio of Zr/Hf is computed on the basis of the minimum variation in the inclusion, and the percentage of high-temperature condensates in the earth and moon are calculated on the basis of the mean U content of the inclusions. The mean value of the enrichment factors of 21 refractory elements relative to C1 chondrites is provided, and the elements that did or did not condense in a solid solution of melilite are listed.

Grossman, L.↗
NASA NTRS1979

Development and demonstration of manufacturing processes for fabricating graphite/PMR-15 polyimide structural elements

The processing requirements for graphite/PMR-15 polyimide composites developed to demonstrate the structural integrity of polyimide composite structural elements at temperatures up to 589K (600 F) are described. Major tasks included: quality assurance development; materials and process development; specification verification; flat panel fabrication; stiffened panel fabrication; honeycomb panel fabrication; chopped fiber moldings; and demonstration component fabrication. Materials, processing, and quality assurance documents were prepared from experimentally derived data. Structural elements consisting of flat panels, corrugated stiffeners, I-beams, hat stiffeners, honeycomb panels, and chopped fiber moldings were made and tested. Property data from 219K (-65 F) to 589K (600 F) were obtained. All elements were made in a production environment. The size of each element was sufficient to insure production capability and structural component applicability. Problems associated with adhesive bonding, laminate and structural element analysis, material variability, and test methods were addressed.

Sheppard, C. H.↗
NASA NTRS1979

Finite element methodology for transient conduction/forced-convection thermal analysis

Finite element methodology for steady state thermal analysis of convectively cooled structures has been extended for transient analysis. The finite elements are based on representing the fluid passages by fluid bulk-temperature nodes and fluid-solid interface nodes. The formulation of the finite element equations for a typical flow passage is based on the weighted residual method with upwind weighting functions. Computer implementation of the convective finite element methodology using explicit and implicit time integration algorithms is described. Accuracy and efficiency of the methodology is evaluated by comparisons with analytical solutions and finite-difference lumped-parameter analyses. The comparative analyses demonstrate that finite element conduction/conduction methodology may be used to predict transient temperatures with an accuracy equal or superior to the lumped-parameter finite-difference method.

Thornton, E. A.↗
NASA NTRS1978

Major and trace element chemistry of separated fragments from a hibonite-bearing Allende inclusion

The major and trace elements of separated fragments and a bulk sample from CG-11, a hibonite-bearing inclusion in the Allende meteorite, were analyzed. Major element abundances were used to determine the minerology of separated fragments. The high degree of correlation between Eu/Sm ratios and Lu/Yb ratios for the samples studied indicates that their rare earth element (REE) distributions are governed by two components. One, Lu-, Eu-rich, is probably hibonite; the other, depleted in these elements, seems to be associated with the secondary alteration phases, grossular, nepheline and anorthite. The REE distribution in CG-11 precludes melting events after formation of the secondary alteration phases, but a melting event involving the primary minerals cannot be excluded. The enrichment of Lu with respect to other measured REE in hibonite can be explained by present REE condensation models. Two Hf-bearing components, most likely hibonite and perovskite, are necessary to account for variations in Sc/Hf ratios in the fragments studied. The lithophile volatiles Na, Mn, Fe, Zn, and probably Cr increase in the same order as the amount of secondary alteration minerals; the volatile siderophile elements Co and Au, however, do not.

Davis, A. M.↗
NASA NTRS1979

A finite element formulation of the eigenvalue problem in lined ducts with flow

A finite element method is used to formulate the eigenvalue problem for a lined duct with flow. Either two dimensional or axially symmetric ducts with sheared flows can be studied, although the examples cited are two dimensional. The primitive variables of velocity and pressure are used with quadratic shape functions in each element. Results indicate that a useful level of accuracy can be achieved with a modest number of elements. Spurious eigenvalues, easily identified by obviously inconsistent eigenvectors, occur in certain instances. If the number of elements is not too small, these spurious modes are among the higher order eigenvalues of otherwise questionable accuracy. The possibility of using higher order elements which have slope continuity is proposed for future investigations to eliminate the spurious results.

Astley, R. J.↗
NASA NTRS1979

Evaluation of finite element formulations for transient conduction forced-convection analysis

Numerical studies clarifying the advantages and disavantages of conventional versus upwind convective finite elements are presented along with lumped versus consistent formulations for practical conduction forced-convection analysis. A finite-element procedure for treatment of negligible capacitance fluid nodes is presented. The procedure is based on procedures used in finite-element structural dynamics to treat nodes with negligible structural mass. Two finite-element programs and a finite-difference lumped-parameter program used in the studies are discussed. Evaluation studies utilizing three convection and two combined conduction-convection problems are then presented and discussed. Additionally, the computational time saving offered by the finite element procedure is considered for a practical combined conduction-convection problem.

Thornton, E. A.↗
NASA NTRS1980

Trace elements as quantitative probes of differentiation processes in planetary interiors

The characteristic trace element signature that each mineral in the source region imparts on the magma constitutes the conceptual basis for trace element modeling. It is shown that abundances of trace elements in extrusive igneous rocks may be used as petrological and geochemical probes of the source regions of the rocks if differentiation processes, partition coefficients, phase equilibria, and initial concentrations in the source region are known. Although compatible and incompatible trace elements are useful in modeling, the present review focuses primarily on examples involving the rare-earth elements.

Drake, M. J.↗
NASA NTRS1981

Integrated transient thermal-structural finite element analysis

An integrated thermal-structural finite element approach for efficient coupling of transient thermal and structural analysis is presented. New integrated thermal-structural rod and one dimensional axisymmetric elements considering conduction and convection are developed and used in transient thermal-structural applications. The improved accuracy of the integrated approach is illustrated by comparisons with exact transient heat conduction-elasticity solutions and conventional finite element thermal-finite element structural analyses. Results indicate that the approach offers significant potential for further development with other elements.

Thornton, E. A.↗