Search NASA⌕ Search

SEARCH · Search NASA

Results for “fluid physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Atmospheric wind energization of ocean weather

Ocean weather comprises vortical and straining mesoscale motions, which play fundamentally different roles in the ocean circulation and climate system. Vorticity determines the movement of major ocean currents and gyres. Strain contributes to frontogenesis and the deformation of water masses, driving much of the mixing and vertical transport in the upper ocean. While recent studies have shown that interactions with the atmosphere damp the ocean’s mesoscale vortices O(100) km in size, the effect of winds on straining motions remains unexplored. Here, we derive a theory for wind work on the ocean’s vorticity and strain. Using satellite and model data, we discover that wind damps strain and vorticity at an equal rate globally, and unveil striking asymmetries based on their polarity. Subtropical winds damp oceanic cyclones and energize anticyclones outside strong current regions, while subpolar winds have the opposite effect. A similar pattern emerges for oceanic strain, where subtropical convergent flow is damped along the west-equatorward east-poleward direction and energized along the east-equatorward west-poleward direction. These findings reveal energy pathways through which the atmosphere shapes ocean weather.

54 ENVIRONMENTAL SCIENCES↗

Charges on a suspended silicon nitride membrane under a high-energy electron beam

Thin silicon nitride (SiN x ) membranes are widely used in gas and liquid phase transmission electron microscopy (TEM) and as phase plates to enhance imaging contrast. SiN x contains trap sites for both positive and negative charges, which can be manipulated by high-energy electron irradiation, external potential biasing, or light exposure. Charge accumulation on the membrane can significantly affect in situ TEM processes, including chemical and electrochemical reactions, nanoparticle dynamics, and catalytic activity, or introduce unwanted phase shifts when used as a phase plate. Here, in this study, charge accumulation on suspended SiN x membranes was investigated using off-axis electron holography combined with model-free charge analysis, supported by custom finite element analysis (FEA) simulations. An average residual positive charge density of approximately 2.8 × 10 −4 C m −2 was measured. Localized and stable regions of both positive and negative charges were identified on the membrane. The global positive and localized positive/negative charges give rise to strong electric fields and electroosmotic slip velocities at the membrane surface, which are sufficient to induce non-Brownian particle behavior and directional fluid flow, offering a physical explanation for previously observed anomalies in particle dynamics, nucleation, and growth during gas and liquid phase TEM experiments. These results provide a benchmark for understanding charge behavior at SiNx interfaces in gas and liquid phase TEM. Furthermore, the FEA simulations establish a framework for future investigations into charge distribution, electrostatic potentials, and electrical double layers at solid–liquid interfaces, particularly in complex geometries and chemically dynamic environments.

Suspended silicon↗

Limit cycle oscillations in the zonal-flow-catalyzed interactions of ion-temperature-gradient turbulence

Limit-cycle oscillations are studied for ion temperature gradient turbulence, which, in the absence of large diamagnetic (mean) shear flows, saturates through energy transfer from unstable modes to large-scale stable modes via zonal-flow intermediary modes. Oscillations of zonal flow and turbulence levels are strongly constrained by the reactive, largely non-dissipative character of the zonal flows. Since existing predator–prey models for observed oscillations in experiments do not include energy transfer through zonal flows to stable modes, low-order fluid models with this physics are constructed and investigated. A simple three-wave truncation produces low-amplitude zonal flows that slowly oscillate around a zero mean, with turbulence oscillations between coupled wavenumbers that exceed linear frequencies by orders of magnitude. This inconsistency with experimental observations is caused by the weak non-linear drive of zonal flows in three-wave systems and the lack of multiple-wavenumber turbulent interactions. A more comprehensive model that preserves multiple wavenumber interactions within the context of conservative zonal-flow-mediated energy transfer to stable modes accurately reflects observed dynamics when the phase between stable and unstable modes is occasionally randomized.

Li, P. -Y. (ORCID:0000000295254171)↗

Posterior comparison of model dynamics in several hybrid turbulence model forms

Hybrid turbulence models that can accurately reproduce unsteady three-dimensional flow physics across the entire range of grid scales and turbulence dynamics from Reynolds-averaged Navier–Stokes (RANS), through large-eddy simulation (LES), down to direct numerical simulations (DNS) are of increasing interest to the turbulence modeling community. However, despite decades of research and development, the basic tasks of eliminating poor-performing hybrid RANS-LES models and accelerating adoption of superior models through well-designed validation and verification have yet to occur. As a step in this direction, in this work we evaluate thirteen different hybrid RANS-LES models via systematic grid refinement of decaying homogeneous isotropic turbulence. We further derive a novel mathematical framework for assessing the energy partitioning dynamics of each Hybrid RANS-LES model, wherein model-to-model variations in energy partitioning can be interpreted as different feedback mechanisms operating on a low-dimensional nonlinear dynamical system. We found that model forms similar to the flow simulation methodology—also often termed very-large eddy simulation—are dynamically inconsistent with DNS at all resolutions. Additionally, we found a strong dynamical similarity in the feedback mechanisms of all models related to detached eddy simulation and partially averaged Navier–Stokes that is inherent to their general model forms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A generalized effective potential for differentially rotating plasmas

Global stability of differentially rotating plasma is investigated using a generalized effective potential. We first, for a current-free system, obtain a general form of an effective potential in terms of the free energies of global curvature and gradients of rotation for non-axisymmetric disturbances. We then examine the stability of differentially rotating disks for several rotation profiles and present the associated effective potential for the onset of these instabilities in the MHD regime. In particular, results for global axisymmetric magnetorotational instability as well as local and global non-axisymmetric modes are presented. The latter constitute two distinct non-axisymmetric modes, a high frequency local MRI and a global low-frequency non-axisymmetric mode (the magneto-curvature mode, introduced in Ebrahimi and Pharr [Astrophys. J. 936, 145 (2022)]), confined either between two Alfvénic resonances or an Alfvénic resonance and a boundary.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Heterogeneous Cluster Energetics and Nonlinear Thermodynamic Response in Supercritical Fluids

Microstructural heterogeneities arising from molecular clusters directly affect the nonlinear thermodynamic properties of supercritical fluids. We present a physical model to elucidate the relation between energy exchange and heterogeneous cluster dynamics during the transition from liquidlike to gaslike conditions. By analyzing molecular-dynamics data and employing physical principles, the model considers contributions from three key processes, namely, changing cluster density, cluster separation, and transfer of molecules between clusters. We show that the proposed model is consistent with the energetics at subcritical conditions and can be used to explain the nonlinear behavior of thermodynamic response functions, including the peak in the isobaric heat capacity.

42 ENGINEERING↗

Liquid Piston with Spray Cooling Near-Isothermal Compressor

The goal of this project was to prototype and characterize the performance of a liquid-piston spray-cooled gas compressor. The working principle of the compressor enables optimized high-efficiency operation over a very wide range of operating conditions, unlike conventional compressors that are optimized for a narrow range of operating conditions. The compressor technology is suitable for many applications, such as gas pipeline transport, gas storage, and commercial and residential heat pumps. Both physical testing and computational fluid dynamics (CFD) modeling of the processes using the Oak Ridge National Laboratory high-performance computing center were completed. The experimental and CFD studies focused on a near-isothermal liquid-piston compressor (LPC) that uses propylene glycol to compress CO 2 . The first prototype demonstrated isothermal operation during several sequentially executed cycles of CO 2 compression and raised the temperature of the compressed CO 2 by only 2 K, compared with approximately 6 K when the gas was compressed non-isothermally. Isothermal operation was demonstrated at CO 2 flow rates of up to 2 L/min. The second prototype was designed with two compression chambers to allow continuous flow of high-pressure CO 2 . However, the design of the valve train to direct flow between the compression chambers was not sufficient to allow demonstration of CO 2 compression. Numerical simulations of the LPC in which the compression chamber was filled with propylene glycol injected from the bottom inlet were performed using large eddy simulation (LES) with the wall-adapting local eddy-viscosity subgrid-scale model coupled with the multiphase volume of fluid (VOF) model to simulate the transient interface between gas and liquid and to capture the heat and mass transfers within the compression chamber. In this effort, the effects of boundary conditions applied to the LES-VOF calculations (i.e., no wall, an adiabatic wall, and a wall with a heat flux subscribed) on the overall pressure and temperature of the CO 2 gas as well as the transient evolution of flow and heat transfer within the compression chamber were investigated and are discussed in this report. The LES calculation with no wall showed no dynamical flow patterns, and the volume-averaged temperature of CO 2 increased from 305 to 392.7 K, whereas LES calculations with a constant wall temperature or a wall heat flux had similar increases of CO 2 temperatures. The results of the LES simulation using a wall heat flux showed different stages in the compression process and revealed dynamical formation and interaction of CO 2 gas layers and circulation flow patterns within the chamber that contributed to the overall heat transfer between the solid wall, gas, and liquid surface in the compressor. Though an industrial partnership for commercializing the compressor was not secured, the technology was attractive for an industrial partner to use in two research proposals in response to US Department of Energy funding opportunity announcements.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Hydropower Biological Evaluation Toolset (HBET) Version 3.0: User Guide

The Hydropower Biological Evaluation Tools (HBET) software package, developed by Pacific Northwest National Laboratory (PNNL), is designed to assemble, organize, and process data collected by Sensor Fish and live fish. HBET enable users to characterize the hydraulic conditions of hydropower structures and estimate fish injury and mortality rates from various stressors. Future updates of the software may support other technologies, such as bead tracking in physical models and computational fluid dynamics. The HBET program can be customized to analyze different hydraulic applications, including turbines, spillways, weirs, pumped storage, and other user-defined functions, and therefore, help researchers, turbine designers, hydropower operators, and regulators better evaluate hydropower structures regarding their environmental sustainability and cost-effectiveness. Added content to the user guide about the new feature for predicting absolute injury rates.

13 HYDRO ENERGY↗

Boundary layer transition: A review of theory, experiment and related phenomena

The overall problem of boundary layer flow transition is reviewed. Evidence indicates a need for new, basic physical hypotheses in classical fluid mechanics math models based on the Navier-Stokes equations. The Navier-Stokes equations are challenged as inadequate for the investigation of fluid transition, since they are based on several assumptions which should be expected to alter significantly the stability characteristics of the resulting math model. Strong prima facie evidence is presented to this effect.

Kistler, E. L.↗

A zero-gravity demonstration of the collision and coalescence of water droplets

The mechanics of the collision and coalescence of liquid droplets is one of the main research areas in the fields of nuclear physics, astrophysics, meteorology and fluid mechanics. The crew members on the Skylab 3 and 4 missions were requested to perform demonstrations of the collision and coalescence of water droplets under the low gravity environment at orbital altitude. In Skylab 4 two water droplets with equal volumes, 30 cu cm each, were used. A dark colored droplet (contaminated with grape drink) moving with a velocity of 3.14 cm/sec collided with a stationary pink colored droplet (contaminated with strawberry drink) and coalescence occurred. Theoretical models are proposed to study the various stages of the collision-coalescence processes. Special considerations are concentrated in the investigation of the bounce-coalescence and coalescence-instability processes. The surface tension of the coalesced droplets was calculated to be 52 dynes/cm in perfect agreement with laboratory measurements made after the flight using a reproduction of the liquids.

Hung, R. J.↗

Miniature diaphragm valve for medical equipment

Valve assembly keeps nutrient out of moving parts of valve by physically isolating plunger from fluid. Poppet and diaphragm are molded together, and latter is shaped to act as static seal, which remains seated during the operation. As plunger moves, diaphragm also moves to form separate cavity for nutrient and thus isolates it from plunger cavity and latching mechanism.

Stadler, T. J.↗

Accretion of rotating fluids by barytropes - Numerical results for white-dwarf models

Numerical sequences of rotating axisymmetric nonmagnetic equilibrium models are constructed which represent the evolution of a barytropic star as it accretes material from a rotating medium. Two accretion geometries are considered - one approximating accretion from a rotating cloud and the other, accretion from a Keplerian disk. It is assumed that some process, such as Ekman spin-up or nonequilibrium oscillations, maintains nearly constant angular velocity along cylinders about the rotation axis. Transport of angular momentum in the cylindrically radial direction by viscosity is included. Fluid instabilities and other physical processes leading to enhancement of this transport are discussed. Particular application is made to zero-temperature white-dwarf models, using the degenerate electron equation of state. An initially nonrotating 0.566-solar-mass white dwarf is followed during the accretion of more than one solar mass of material. Applications to degenerate stellar cores, to mass-transfer binary systems containing white dwarfs, such as novae and dwarf novae, to Type I supernovae, and to galactic X-ray sources are considered.

Durisen, R. H.↗

Mixing of two liquid metals on spar payload due to spin-up and spin-down

Unexpected results from SPAR experiments, directed at obtaining fine dispersions of metal systems that in a 1-g environment tend to segregate very rapidly, were considered. The physical processes occurring in fluid samples, such as the SPAR samples before solidification, were shown to be insufficient to produce a well mixed liquid by the time solidification was initiated. This would result in solidified samples with the type of segregation noted in the SPAR samples. Experimental evidence and analytical arguments are presented.

Schafer, C. F.↗

Computer modeling of heat pipe performance

A parametric study of the defining equations which govern the steady state operational characteristics of the Grumman monogroove dual passage heat pipe is presented. These defining equations are combined to develop a mathematical model which describes and predicts the operational and performance capabilities of a specific heat pipe given the necessary physical characteristics and working fluid. Included is a brief review of the current literature, a discussion of the governing equations, and a description of both the mathematical and computer model. Final results of preliminary test runs of the model are presented and compared with experimental tests on actual prototypes.

Peterson, G. P.↗

Heat pipe modeling and simulation

Presented herein is a parametric study of the defining equations which govern the steady state operational characteristics of the Grumman Monogroove Dual Passage Heat Pipe. These defining equations are combined to develop a mathematical model which describes and predicts the operational and performance capabilities of a specific heat pipe, given the necessary physical characteristics and working fluid. Included is a brief review of the current literature, a discussion of the governing equations, and a description of both the mathematical and computer model. Final results of preliminary test runs of the model are presented and compared with experimental tests performed by Grumman on actual prototypes.

Peterson, G. P.↗

Estimation of instantaneous heat transfer coefficients for a direct-injection stratified-charge rotary engine

The main objective of this report was to derive equations to estimate heat transfer coefficients in both the combustion chamber and coolant pasage of a rotary engine. This was accomplished by making detailed temperature and pressure measurements in a direct-injection stratified-charge rotary engine under a range of conditions. For each sppecific measurement point, the local physical properties of the fluids were calculated. Then an empirical correlation of the coefficients was derived by using a multiple regression program. This correlation expresses the Nusselt number as a function of the Prandtl number and Reynolds number.

Lee, C. M.↗

Regressed relations for forced convection heat transfer in a direct injection stratified charge rotary engine

Currently, the heat transfer equation used in the rotary combustion engine (RCE) simulation model is taken from piston engine studies. These relations have been empirically developed by the experimental input coming from piston engines whose geometry differs considerably from that of the RCE. The objective of this work was to derive equations to estimate heat transfer coefficients in the combustion chamber of an RCE. This was accomplished by making detailed temperature and pressure measurements in a direct injection stratified charge (DISC) RCE under a range of conditions. For each specific measurement point, the local gas velocity was assumed equal to the local rotor tip speed. Local physical properties of the fluids were then calculated. Two types of correlation equations were derived and are described in this paper. The first correlation expresses the Nusselt number as a function of the Prandtl number, Reynolds number, and characteristic temperature ratio; the second correlation expresses the forced convection heat transfer coefficient as a function of fluid temperature, pressure and velocity.

Lee, Chi M.↗