SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The procedures used to process the GEOS-3 radar altimeter data from raw telemetry data to a final user data product are described. In addition, the radar altimeter hardware design and operating parameters are presented to aid the altimeter user in understanding the altimeter data.
On February 14, 1980, the solar maximum mission (SMM) satellite was launched into orbit with experiments to monitor solar activity. In order to obtain common object observations, experiments must be coaligned within 90 arc-seconds of the spacecraft pointing vector. Hardware designed to minimize structural and thermal distortions of the experiment support plate is described. Coalignment was provided through control of interface which combined flexible blades to limit load transfer and spherical seats for alignment reference.
Problems encountered in testing onboard signal processing hardware designed to achieve radiometric and geometric correction of satellite imaging data are considered. These include obtaining representative image and ancillary data for simulation and the transfer and storage of a large quantity of image data at very high speed. The high resolution, high speed preprocessing of LANDSAT-D imagery is considered.
The NASA multipurpose differential absorption lidar (DIAL) system uses two high conversion efficiency dye lasers which are optically pumped by two frequency-doubled Nd:YAG lasers mounted rigidly on a supporting structure that also contains the transmitter, receiver, and data system. The DIAL system hardware design and data acquisition system are described. Timing diagrams, logic diagrams, and schematics, and the theory of operation of the control electronics are presented. Success in obtaining remote measurements of ozone profiles with an airborne systems is reported and results are analyzed.
The interference technology incorporated into the NTF design (hardware) and the emerging transonic wall interference assessment correction procedures (software) to be employed when the NTF becomes operational was reviewed. It is anticipated that the early experiments will provide data relevant to wall interference effects.
The Infrared Astronomical Satellite, to be launched in August 1981, will perform an all-sky survey in the 8-120 micron wavelength region. High sensitivity to thermal radiation and the low operating temperature of optics and thermal control surfaces make the IRAS telescope extremely vulnerable to contamination. Four special topics of importance are discussed in this paper: (1) deposition of atmospheric gases; (2) sighting of particles released from the satellite; (3) functions of a deployable aperture cover; and (4) degradation of a radiatively cooled sunshade from spacecraft outgassing. These topics demonstrate how mission strategy, ground cleaning and handling, and hardware design are used to avoid contamination which would degrade telescope performance.
The concept of a simple Stirling research engine that could be used by industrial, university, and government laboratories was studied. The conceptual and final designs, hardware fabrication and the experimental validation of a preprototype stirling laboratory research engine (SLRE) were completed. Also completed was a task to identify the potential markets for research engines of this type. An analytical effort was conducted to provide a stirling cycle computer model. The versatile engine is a horizontally opposed, two piston, single acting stirling engine with a split crankshaft drive mechanism; special instrumentation is installed at all component interfaces. Results of a thermodynamic energy balance for the system are reported. Also included are the engine performance results obtained over a range of speeds, working pressures, phase angles and gas temperatures. The potential for a stirling research engine to support the laboratory requirements of educators and researchers was demonstrated.
Fluid transfer requirements are presented for the orbital transfer vehicle (OTV) issues such as OTV configuration, hardware design and size are taken into consideration. Tank chilldown, tank fill and thermodynamic properties are all evaluated in relationship to fluid transfer needs.
The concept of placing a hydrogen maser high stability clock in Earth orbit to provide accurate time and frequency comparisons worldwide to major timing centers and to a large number of radio observatory antenna sites involved in VLBI measurements was studied. The proposal was chiefly directed toward studies and initial hardware designs for time comparisons between hydrogen maser frequency standards and to modifications of the hydrogen maser for long-term use in space.
The status of the X-band uplink development program is examined from a systems' viewpoint. The hardware, designed and built under the program, is now in place at DSS-13. System stability testing is underway. An X-band receive capability is being implemented on both the Galileo and the Venus Radar Mapper spacecraft. Experiments are planned to demonstrate the capabilities of the X-band uplink system and to permit performance of the gravitational wave experiment on the Galileo orbiter and obtain a more detailed gravity map of Venus.
The hardware and software developments in computer graphics are discussed. Major topics include: system capabilities, hardware design, system compatibility, and software interface with the data base management system.
At NASA-Ames Research Center's Life Sciences Flight Experiments Project Office two payloads for the Shuttle Spacelab are currently in development. The first payload, Spacelab-3, will launch in November 1984. Unique life sciences hardware designed to support animals in 0-g will fly for the first time. Flight crew training sessions for the Spacelab-3 astronauts began in June 1982. Human factors involvement is extensive. A thorough understanding of both the 1-g and 0-g environments is necessary. The weightlessness of the space environment creates special conditions; e.g., the time required for a 1-g laboratory experiment significantly increases in 0-g. The transportation of objects in 0-g uses different techniques than on earth. These considerations, plus others, are incorporated into the design of the Spacelab-3 crew training program.
The concept used in the design of the Mariner Mark II (MMII) spacecraft is consistent with the solar system exploration strategies which were developed by the Space Science Board of the National Academy of Sciences. The missions to comets, main belt asteroids, and outer planets are sufficiently similar to make possible a use of almost all of the design, hardware, and software in most engineering subsystems, without significant modification, for subsequent missions. Mariner Mark II missions are discussed, taking into account a comet rendezvous with asteroid flyby, the Saturn Flyby/Titan Probe, the Cassini or Saturn Orbiter/Titan Probe, the Main Belt Asteroid Rendezvous mission, the Uranus Flyby/Uranus Probe mission, and the Neptune Flyby/Neptune Probe mission.
Activities of the manufacturing/producibility working group within the Advanced High-Pressure O2/H2 Technology Program are summarized. The objectives of the M/P working group are: to develop and evaluate process and manufacturing techniques for advanced propulsion hardware design and selected materials; and to optimize the producibility of (SSME) components and assemblies by improved performance, increased life, greater reliability, and/or reduced cost. The technologies being developed include: plasma arc, laser, and inertia welding; combustion chamber and turbine blade coatings; coating processes; high performance alloy electroforming; and process control technology.
A system requirements definition and configuration study (Phase B) of the Tethered Satellite System (TSS) was conducted during the period 14 November 1977 to 27 February 1979. Subsequently a study extension was conducted during the period 13 June 1979 to 30 June 1980, for the purpose of refining the requirements identified during the main phase of the study, and studying in some detail the implications of accommodating various types of scientific experiments on the initial verification flight mission. An executive overview is given of the Tethered Satellite System definition developed during the study. The results of specific study tasks undertaken in the extension phase of the study are reported. Feasibility of the Tethered Satellite System has been established with reasonable confidence and the groundwork laid for proceeding with hardware design for the verification mission.
The interactive information processing for the mesoscale analysis and space sensor (MASS) program is reported. The development and implementation of new spaceborne remote sensing technology to observe and measure atmospheric processes is described. The space measurements and conventional observational data are processed together to gain an improved understanding of the mesoscale structure and dynamical evolution of the atmosphere relative to cloud development and precipitation processes. A Research Computer System consisting of three primary computers was developed (HP-1000F, Perkin-Elmer 3250, and Harris/6) which provides a wide range of capabilities for processing and displaying interactively large volumes of remote sensing data. The development of a MASS data base management and analysis system on the HP-1000F computer and extending these capabilities by integration with the Perkin-Elmer and Harris/6 computers using the MSFC's Apple III microcomputer workstations is described. The objectives are: to design hardware enhancements for computer integration and to provide data conversion and transfer between machines.
A generalized computer program for analysis of pressure and composition in a multiple-volume system has been developed by NASA. This paper describes the development of the program, outlines the program's capabilities, and illustrates the application of the program to Space Shuttle-related atmospheric pressure and composition control analyses. The program's features include the calculation of transient partial pressures of four gases in four volumes, an option for either isothermal or temperature-transient analyses, simulation of pressure and composition control hardware, and simulation involving 0-10 crewmembers. This computer program has been used successfully for a variety of Shuttle-related analyses to support hardware design, develop operating procedures, and provide real-time Shuttle mission support. Due to the versatility of this computer program, it will be utilized for Space Station program analyses.
The feasibility of an advanced convective cooling concept applied to rocket turbine airfoils which operate in a high pressure hydrogen and methane environment was investigated. The concept consists of a central structural member in which grooves are machined. The grooves are temporarily filled with a removable filler and the entire airfoil is covered with a layer of electroformed nickel, or nickel base alloy. After removal of the filler, the low thermal resistance of the nickel closure causes the wall temperature to be reduced by heat transfer to the coolant. The program is divided in the following tasks: (1) turbine performance appraisal; (2) coolant geometry evaluation; (3) test hardware design and analysis; and (4) test airfoil fabrication.