SEARCH · Search NASA
Results for “intelligence analysis”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Instrument Front-Ends at Fermilab During Run II
The optimization of an accelerator relies on the ability to monitor the behavior of the beam in an intelligent and timely fashion. The use of processor-driven front-ends allowed for the deployment of smart systems in the field for improved data collection and analysis during Run II. This paper describes the implementation of the two main systems used: National Instruments LabVIEW running on PCs, and WindRiver's VxWorks real-time operating system running in a VME crate processor.
Artificial Intelligence for Dynamic Phase Transitions in Materials [PowerPoint]
The presentation covers the following areas: emergent phenomena and non-equilibrium transitions in granular materials; materials science applications, including defects, interfaces and emergent phenomena; modeling with molecular dynamics simulations; principal component analysis (PCA); previous works; PCA applied to nonequilibrium transitions; PCA for varied quenched disorder; PCA incorporating particle velocity; and ending with a summary and impacts.
Implementation of new PRODIAG algorithm and simulation-based acceptance test - 219
This paper presents the improvement of an automated-reasoning computer program for nuclear power plant diagnosis, namely PRODIAG. PRODIAG, first developed at the Argonne National Laboratory, uses confluence-based reasoning to perform fault diagnosis in engineering systems that can be described by the conservation laws for mass, energy, and momentum. Therefore, unlike other plant configuration-dependent rule-based diagnosis algorithms, the code is generally applicable to a wide variety of plant configurations by simply replacing the plant instrumentation diagram (PID) database. The need for improvement was raised when the original PRODIAG failed to provide the requisite degree of extensibility and maintainability for new applications. These shortcomings have been addressed through a new code architecture that uses an objected-oriented logic-programming language in place of the original Prolog language and uses an open-source automated reasoning engine in place of the original hardwired rule-evaluation sequence. This paper presents the architecture and implementation details of the code transition. Verification and validation studies were performed for the new PRODIAG, which involved re-running the distinct fault cases defined at the time the code was originally developed. (authors)
Unmanned air vehicle (UAV) ultra-persitence research
Sandia National Laboratories and Northrop Grumman Corporation Integrated Systems, Unmanned Systems (NGIS UMS) collaborated to further ultra-persistence technologies for unmanned air vehicles (UAVs). The greatest shortfalls in UAV capabilities have been repeatedly identified as (1) insufficient flight persistence or 'hang time,' (2) marginal electrical power for running higher power avionics and payload systems, and (3) inadequate communications bandwidth and reach. NGIS UMS requested support from Sandia to develop an ultra-persistent propulsion and power system (UP3S) for potential incorporation into next generation UAV systems. The team members tried to determine which energy storage and power generation concepts could most effectively push UAV propulsion and electrical power capabilities to increase UAV sortie duration from days to months while increasing available electrical power at least two-fold. Primary research and development areas that were pursued included these goals: perform general system engineering and integration analyses; develop initial thermal and electrical power estimates; provide mass, volume, dimensional, and balance estimates; conduct preliminary safety assessments; assess logistics support requirements; perform, preliminary assessments of any security and safeguards; evaluate options for removal, replacement, and disposition of materials; generally advance the potential of the UP3S concept. The effort contrasted and compared eight heat sources technologies, three power conversion, two dual cycle propulsion system configurations, and a single electrical power generation scheme. Overall performance, specific power parameters, technical complexities, security, safety, and other operational features were successfully investigated. Large and medium sized UAV systems were envisioned and operational flight profiles were developed for each concept. Heat source creation and support challenges for domestic and expeditionary operations were considered. Fundamental cost driver analysis was also performed. System development plans were drafted in order to determine where the technological and programmatic critical paths lay. As a result of this effort, UAVs were to be able to provide far more surveillance time and intelligence information per mission while reducing the high cost of support activities. This technology was intended to create unmatched global capabilities to observe and preempt terrorist and weapon of mass destruction (WMD) activities. Various DOE laboratory and contractor personnel and facilities could have been used to perform detailed engineering, fabrication, assembly and test operations including follow-on operational support. Unfortunately, none of the results will be used in the near-term or mid-term future. NGIS UMS and SNL felt that the technical goals for the project were accomplished. NGIS UMS was quite pleased with the results of analysis and design although it was disappointing to all that the political realities would not allow use of the results. Technology and system designs evaluated under this CRADA had previously never been applied to unmanned air vehicles (UAVs). Based upon logistic support cost predictions, because the UAVs would not have had to refuel as often, forward basing support costs could have been reduced due to a decrease in the number and extent of support systems and personnel being required to operate UAVs in remote areas. Basic application of the advanced propulsion and power approach is well understood and industry now understands the technical, safety, and political issues surrounding implementation of these strategies. However, the overall economic impact was not investigated. The results will not be applied/implemented. No near-term benefit to industry or the taxpayer will be encountered as a result of these studies.
Explainable AI classification for parton density theory
Quantitatively connecting properties of parton distribution functions (PDFs, or parton densities) to the theoretical assumptions made within the QCD analyses which produce them has been a longstanding problem in HEP phenomenology. To confront this challenge, we introduce an ML-based explainability framework, XAI4PDF, to classify PDFs by parton flavor or underlying theoretical model using ResNet-like neural networks (NNs). By leveraging the differentiable nature of ResNet models, this approach deploys guided backpropagation to dissect relevant features of fitted PDFs, identifying x-dependent signatures of PDFs important to the ML model classifications. By applying our framework, we are able to sort PDFs according to the analysis which produced them while constructing quantitative, human-readable maps locating the x regions most affected by the internal theory assumptions going into each analysis. This technique expands the toolkit available to PDF analysis and adjacent particle phenomenology while pointing to promising generalizations.
GIScience in the era of Artificial Intelligence: a research agenda towards Autonomous GIS
The advent of generative AI exemplified by large language models (LLMs) opens new ways to represent and compute geographic information and transcends the process of geographic knowledge production, driving geographic information systems (GIS) towards autonomous GIS. Leveraging LLMs as the decision core, autonomous GIS can independently generate and execute geoprocessing workflows to perform spatial analysis. In this vision paper, we further elaborate on the concept of autonomous GIS and present a conceptual framework that defines its five autonomous goals, five levels of autonomy, five core functions, and three operational scales. We demonstrate how autonomous GIS could perform geospatial data retrieval, spatial analysis, and map making with four proof-of-concept GIS agents. We conclude by identifying critical challenges and future research directions, including fine-tuning and self-growing decision-cores, autonomous modelling, and examining the societal and practical implications of autonomous GIS. By establishing the groundwork for a paradigm shift in GIScience, this paper envisions a future where GIS moves beyond traditional workflows to autonomously reason, derive, innovate, and advance geospatial solutions to pressing global challenges. Meanwhile, we emphasize that as we design and deploy increasingly intelligent geospatial systems, we carry a responsibility to ensure they are developed in socially responsible ways, serve the public good, and support the continued value of human geographic insight in an AI-augmented future.
A programmable shared-memory system for an array of processing-in-memory devices
Processing in memory (PIM), the concept of integrating processing directly with memory has been attracting a lot of attention, since PIM can assist in overcoming the throughput limitation caused by data movement between CPU and memory. The challenge, however, is that it requires the programmers to have a deep understanding of the PIM architecture to maximize the benefits such as data locality and parallel thread execution on multiple PIM devices. In this study, we present AnalyzeThat, a programmable shared-memory system for parallel data processing with PIM devices. Thematic to AnalyzeThat is a rich PIM-aware data structure (PADS), which is an encapsulation that integrally ties together the data, the analysis tasks and the runtime needed to interface with the PIM device array. The PADS abstraction provides (i) a sophisticated key-value data container that allows programmers to easily store data on multiple PIMs, (ii) a suite of parallel operations with which users can easily implement data analysis applications, and (iii) a runtime, hidden to programmers, which provides the mechanisms needed to overlay both the data and the tasks on the PIM device array in an intelligent fashion, based on PIM-specific information collected from the hardware. We have developed a PIM emulation framework called AnalyzeThat. In conclusion, our experimental evaluation with representative data analytics applications suggests that the proposed system can significantly reduce the PIM programming effort without losing its technology benefits.
Intelligent Computer Vision System for Automated Classification
In this paper we investigate an Intelligent Computer Vision System applied for recognition and classification of commercially available cork tiles. The system is capable of acquiring and processing gray images using several feature generation and analysis techniques. Its functionality includes image acquisition, feature extraction and preprocessing, and feature classification with neural networks (NN). We also discuss system test and validation results from the recognition and classification tasks. The system investigation also includes statistical feature processing (features number and dimensionality reduction techniques) and classifier design (NN architecture, target coding, learning complexity and performance, and training with our own metaheuristic optimization method). The NNs trained with our genetic low-discrepancy search method (GLPtauS) for global optimisation demonstrated very good generalisation abilities. In our view, the reported testing success rate of up to 95% is due to several factors: combination of feature generation techniques; application of Analysis of Variance (ANOVA) and Principal Component Analysis (PCA), which appeared to be very efficient for preprocessing the data; and use of suitable NN design and learning method.
LCLS Big Data Handling – How I Learned to Stop Worrying and Love the Data Deluge
Advanced data and computing systems are vital to Linac Coherent Light Source (LCLS) operations, data interpretation and overall scientific productivity. The transition to MHz-era operation marks a fundamental change in scale that requires new infrastructure and architectures to link LCLS to the required scale of computing needed for scientific interpretation. The LCLS-II Data System meets big data challenges by implementing configurable data reduction that can adapt to multiple science areas, real-time analysis frameworks to provide visualization and fast feedback, and the ability to transfer data to local and remote computational facilities for near real time analysis at the appropriate scale. Feature extracted information generated in the data analysis pipeline - at the edge, local compute, or remote High-Performance Computing (HPC) resources - can be used to steer experiments and inform user decisions during beam time. Artificial Intelligence and Machine Learning (AI/ML) techniques present new opportunities to rapidly analyse large datasets and direct experiments, but create new challenges in scaling, adaptability, complexity, and trustworthiness. We describe how the LCLS-II Data System architecture addresses its data-driven challenges in the areas of data acquisition, data processing, data management, and workflow orchestration to decrease the overall time-to-science and provide a vision for future developments.
AnalyzeThat: A Programmable Shared-Memory System for an Array of Processing-In-Memory Devices
Processing In Memory (PIM), the concept of integrating processing directly with memory, has been attracting a lot of attention since PIM can assist in overcoming the throughput limitation caused by data movement between CPU and memory. The challenge, however, is that it requires the programmers to have a deep understanding of the PIM architecture to maximize the benefits such as data locality and parallel thread execution on multiple PIM devices. In this study, we present AnalyzeThat, a programmable shared-memory system for parallel data processing with PIM devices. Thematic to AnalyzeThat is a rich PIM-Aware Data Structure (PADS), which is an encapsulation that integrally ties together the data, the analysis tasks and the runtime needed to interface with the PIM device array. The PADS abstraction provides (i) a key-value data container that allows programmers to easily store data on multiple PIMs, (ii) a suite of parallel operations with which users can easily implement data analysis applications, and (iii) a runtime, hidden to programmers, which provides the mechanisms needed to overlay both the data and the tasks on the PIM device array in an intelligent fashion, based on PIM-specific information collected from the hardware. We have developed a PIM emulation framework called AnalyzeThat. Our experimental evaluation with representative data analytics applications suggests that the proposed system can significantly reduce the PIM programming effort without losing its technology benefits.
DeepGrid: Robust Deep Reinforcement Learning-based Contingency Management
Increasing uncertainty raised by the integration of renewable energy resources requires an enormous number of simulations to be carried out for the security assessment of the power grid. However, it is challenging to assess the steady-state and dynamic security indices for different system contingency events by doing an exhaustive analysis in real-time due to the computational and communication constraints. One promising solution is using data-driven techniques along with the system models to train an intelligent contingency management framework to better handle the contingencies in real-time. Nevertheless, implementing a data-driven technique to obtain the best remedial actions necessitates to account for the effect of the measurement noise on the performance of the contingency management. To tackle these challenges, we leverage a robust deep reinforcement learning (DRL) algorithm called Double Deep Q-Network (DDQN) to design a recommender system capable of prescribing optimal control actions with the help of the real-time digital simulator (RTDS). The use of RTDS system in combination with the advanced DRL algorithm allows to explore a wide variety of system contingencies in order to derive better remedial actions. The performance of the proposed algorithm is evaluated in IEEE 9-bus system under different loading conditions, and different network configurations in presence of noisy measurements.
NDMAS implementation and data qualification for accident tolerant fuel experiments
In order to meet quality and regulatory requirements associated with the U.S. Department of Energy Accident Tolerant Fuels (ATF) experiments, all data and documentation associated with ATF component fabrication, characterization, traceability, testing and post irradiation examination are being managed using the Nuclear Data Management and Analysis System (NDMAS). NDMAS melds commercial off-the-shelf software to provide the full range of needed functionality. The core component of NDMAS is the SAS Enterprise Business Intelligence software, which provides data manipulation, statistical and graphical capabilities, and delivery of live content to web pages. Content delivery to both Idaho National Laboratory researchers and external users via a web interface is managed using SharePoint, which is access-controlled. Additionally, scripts, macros, and commercial wrappers may be used or written by the NDMAS team to control interfaces between SAS and the structured query language server, where much of the data reside. ATF experiment data and documentation stored in the NDMAS database may be utilized to support Nuclear Regulatory Commission licensing of ATF concepts for commercial Light Water Reactor demonstration. Therefore, Data Qualification Plans are being developed to screen and tag all document and data input for ATR water loop testing, Transient Reactor Testing (TREAT), and post irradiation examination. A project-wide document library has been created in the ATF NDMAS SharePoint Site for general unrestricted document and information access. Restricted libraries have also been created to allow individual customer access to restricted documents. Data from ATR water loop instrumented lead experimentation, TREAT, and post-irradiation examination will be available to program participants on the SharePoint site as they are collected. This offers a unique capability for team collaboration while these tests are being conducted. (authors)
A data-driven framework for predicting machining stability: employing simulated data, operational modal analysis, and enhanced transfer learning
Chatter, a self-excited vibration phenomenon, presents a significant challenge in machining operations, particularly in high-speed milling, where it can degrade tool life, reduce material removal efficiency, and compromise workpiece quality. Addressing this challenge requires a reliable predictive model that can accommodate the complex dynamics of various machining scenarios. This study introduces a novel, data-driven approach to predicting machining stability, leveraging over 140,000 simulated datasets and employing advanced techniques such as operational modal analysis (OMA), enhanced transfer learning (TL), and receptance coupling substructure analysis (RCSA). By integrating these methodologies, the framework effectively classifies and predicts chatter across diverse operational modes, achieving robust and accurate outcomes. Our model utilizes a Random Forest (RF) classifier trained with the comprehensive dataset, which demonstrates substantial improvements in both predictive accuracy and robustness. Specifically, the RF model achieved an accuracy rate of 85%, an area under the curve (AUC) of 0.90, and an F1 score of 0.88, underscoring its capability to adapt to varying machining configurations. These results highlight the framework’s potential to enhance operational efficiency and machining quality by providing reliable chatter predictions across a broad range of machining parameters. In conclusion, this research thus offers a significant advancement in predictive maintenance for machining processes, enabling more stable and efficient manufacturing operations.
Towards intelligent diagnostic system employing integration of mathematical and engineering model
The development of medical diagnostic system has been one of the main research fields during years. The goal of the medical diagnostic system is to place a nosological system that could ease the diagnostic evaluation normally performed by scientists and doctors. Efficient diagnostic evaluation is essentials and requires broad knowledge in order to improve conventional diagnostic system. Several approaches on developing the medical diagnostic system have been designed and tested since the earliest 60s. Attempts on improving their performance have been made which utilizes the fields of artificial intelligence, statistical analyses, mathematical model and engineering theories. With the availability of the microcomputer and software development as well as the promising aforementioned fields, medical diagnostic prototypes could be developed. In general, the medical diagnostic system consists of several stages, namely the 1) data acquisition, 2) feature extraction, 3) feature selection, and 4) classifications stages. Data acquisition stage plays an important role in converting the inputs measured from the real world physical conditions to the digital numeric values that can be manipulated by the computer system. One of the common medical inputs could be medical microscopic images, radiographic images, magnetic resonance image (MRI) as well as medical signals such as electrocardiogram (ECG) and electroencephalogram (EEG). Normally, the scientist or doctors have to deal with myriad of data and redundant to be processed. In order to reduce the complexity of the diagnosis process, only the significant features of the raw data such as peak value of the ECG signal or size of lesion in the mammogram images will be extracted and considered in the subsequent stages. Mathematical models and statistical analyses will be performed to select the most significant features to be classified. The statistical analyses such as principal component analysis and discriminant analysis as well as mathematical model of clustering technique have been widely used in developing the medical diagnostic systems. The selected features will be classified using mathematical models that embedded engineering theory such as artificial intelligence, support vector machine, neural network and fuzzy-neuro system. These classifiers will provide the diagnostic results without human intervention. Among many publishable researches, several prototypes have been developed namely NeuralPap, Neural Mammo, and Cervix Kit. The former system (NeuralPap) is an automatic intelligent diagnostic system for classifying and distinguishing between the normal and cervical cancerous cells. Meanwhile, the Cervix Kit is a portable Field-programmable gate array (FPGA)-based cervical diagnostic kit that could automatically diagnose the cancerous cell based on the images obtained during sampling test. Besides the cervical diagnostic system, the Neural Mammo system is developed to specifically aid the diagnosis of breast cancer using a fine needle aspiration image.
Techno-economics of hydrocarbon fuel production and recyclables recovery from landfill-destined municipal solid waste: AI-enhanced materials recovery facility design
Sustainable aviation fuels (SAF) production from cellulosic paper fractions of municipal solid waste (MSW) destined for landfills has strong potential to advance environmental, social, and economic sustainability across the aviation and waste sectors. This study proposes an artificial intelligence-enabled material recovery facility (AI-MRF) design to efficiently characterize, separate, process, and convert recovered paper waste from MSW into intermediate chemicals and SAF. The AI-MRF, designed to process 233,091 metric tons of MSW annually, integrates smart manufacturing technologies including AI, visual and hyperspectral imaging, multi-sensor data, and traditional sorting systems. Well-characterized and sorted cellulosic paper waste was utilized for chemical and fuel production scenarios, while clean plastics, metals, and glass were considered for recycling. Conversion of paper waste into intermediate sugars achieved a net present value (NPV) of up to $\$67$ million. For sugar-to-SAF production scenarios, the minimum fuel selling price (MFSP) was calculated at $\$6.11$ per gasoline gallon equivalent (GGE) when excluding recyclable revenue, and $\$4.03$ per GGE when halving recyclable revenue. The MFSP was further reduced to $\$1.96$ per GGE when accounting for SAF sales and recyclables. Nationally, this approach could yield about 2 billion GGE of hydrocarbon fuel annually from available MSW in the United States.
An autonomous laboratory for the accelerated synthesis of novel materials
To close the gap between the rates of computational screening and experimental realization of novel materials, we introduce the A-Lab, an autonomous laboratory for the solid-state synthesis of inorganic powders. This platform uses computations, historical data from the literature, machine learning (ML) and active learning to plan and interpret the outcomes of experiments performed using robotics. Over 17 days of continuous operation, the A-Lab realized 41 novel compounds from a set of 58 targets including a variety of oxides and phosphates that were identified using large-scale ab initio phase-stability data from the Materials Project and Google DeepMind. Synthesis recipes were proposed by natural-language models trained on the literature and optimized using an active-learning approach grounded in thermodynamics. Analysis of the failed syntheses provides direct and actionable suggestions to improve current techniques for materials screening and synthesis design. The high success rate demonstrates the effectiveness of artificial-intelligence-driven platforms for autonomous materials discovery and motivates further integration of computations, historical knowledge and robotics.
Toward autonomous laboratories: Convergence of artificial intelligence and experimental automation
The ever-increasing demand for novel materials with superior properties inspires retrofitting traditional research paradigms in the era of artificial intelligence and automation. An autonomous experimental platform (AEP) has emerged as an exciting research frontier that achieves full autonomy via integrating data-driven algorithms such as machine learning (ML) with experimental automation in the material development loop from synthesis, characterization, and analysis, to decision making. In this review, we started with a primer to describe how to develop data-driven algorithms for solving material problems. Then, we systematically summarized recent progress on automated material synthesis, ML-enabled data analysis, and decision-making. Finally, we discussed the challenges and opportunities in an endeavor to develop the next-generation AEP for ultimately realizing an autonomous or self-driving laboratory. In conclusion, this review will provide insights for researchers aiming to learn the frontier of ML in materials science and deploy AEP in their labs for accelerating material development.