Search NASA⌕ Search

SEARCH · Search NASA

Results for “journals”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Design and fabrication of gas bearings for Brayton cycle rotating unit

Analysis, design, and testing of two types of pivoted pad journal bearings and a spiral-grooved thrust bearing suitable for direct installation into the NASA 2 to 15 KW Brayton Cycle Rotating Unit (BRU) have been accomplished. Both types of tilting pad bearing assemblies are of the preloaded type, consisting of three pads with one pad flexibly mounted. One type utilizes a non-conforming pivot, while the other replaces the conventional spherical pivot with a cruciform flexible member. The thrust bearing is flexure mounted to accommodate static machine mislinement. Test results indicate that both types of journal bearings should satisfy the requirements imposed by the BRU. Hydrostatic tests of the spiral-grooved thrust bearing showed it to be free of pneumatic hammer with as many as 24 orifices over the BRU pressure and load range.

Frost, A.↗
NASA NTRS1973

Nonlinear transient analysis of multi-mass flexible rotors - theory and applications

The equations of motion necessary to compute the transient response of multi-mass flexible rotors are formulated to include unbalance, rotor acceleration, and flexible damped nonlinear bearing stations. A method of calculating the unbalance response of flexible rotors from a modified Myklestad-Prohl technique is discussed in connection with the method of solution for the transient response. Several special cases of simplified rotor-bearing systems are presented and analyzed for steady-state response, stability, and transient behavior. These simplified rotor models produce extensive design information necessary to insure stable performance to elastic mounted rotor-bearing systems under varying levels and forms of excitation. The nonlinear journal bearing force expressions derived from the short bearing approximation are utilized in the study of the stability and transient response of the floating bush squeeze damper support system. Both rigid and flexible rotor models are studied, and results indicate that the stability of flexible rotors supported by journal bearings can be greatly improved by the use of squeeze damper supports. Results from linearized stability studies of flexible rotors indicate that a tuned support system can greatly improve the performance of the units from the standpoint of unbalanced response and impact loading. Extensive stability and design charts may be readily produced for given rotor specifications by the computer codes presented in this analysis.

Kirk, R. G.↗
NASA NTRS1973

Rheology in lubrication

The rheological effects on lubrication are discussed. The types of lubrication considered are thick film hydrodynamic lubrication and thin film elastohydrodynamic lubrication. The temperature-viscosity, viscoelastic, shear-thinning, and normal stess effects on the lubrication of journal bearings are analyzed. A graph of the pressure distribution of viscoelastic liquids in journal bearings is provided. Mathematical models are developed to define the effects of various properties of the lubricants on friction reduction.

Cheng, H. S.↗
NASA NTRS1974

The response of rotating machinery to external random vibration

A high-speed turbogenerator employing gas-lubricated hydrodynamic journal and thrust bearings was subjected to external random vibrations for the purpose of assessing bearing performance in a dynamic environment. The pivoted-pad type journal bearings and the step-sector thrust bearing supported a turbine-driven rotor weighing approximately twenty-one pounds at a nominal operating speed of 36,000 rpm. The response amplitudes of both the rigid-supported and flexible-supported bearing pads, the gimballed thrust bearing, and the rotor relative to the machine casing were measured with capacitance type displacement probes. Random vibrations were applied by means of a large electrodynamic shaker at input levels ranging between 0.5 g (rms) and 1.5 g (rms). Vibrations were applied both along and perpendicular to the rotor axis. Response measurements were analyzed for amplitude distribution and power spectral density. Experimental results compare well with calculations of amplitude power spectral density made for the case where the vibrations were applied along the rotor axis. In this case, the rotor-bearing system was treated as a linear, three-mass model.

Tessarzik, J. M.↗
NASA NTRS1974

Effects of vibration and shock on the performance of gas-bearing space-power Brayton cycle turbomachinery. Part 4: Suppression of rotor-bearing system vibrations through flexible bearing support damping

A bearing damper, operating on the support flexure of a pivoted pad in a tilting-pad type gas-lubricated journal bearing, has been designed, built, and tested under externally-applied random vibrations. The NASA Brayton Rotating Unit (BRU), a 36,000 rpm, 10-Kwe turbogenerator had previously been subjected in the MTI Vibration Test Laboratory to external random vibrations, and vibration response data had been recorded and analyzed for amplitude distribution and frequency content at a number of locations in the machine. Based on data from that evaluation, a piston-type damper was designed and developed for each of the two flexibly-supported journal bearing pads (one in each of the two three-pad bearings). A modified BRU, with dampers installed, has been re-tested under random vibration conditions. Root-mean-square vibration amplitudes were determined from the test data, and displacement power spectral density analyses have been performed. Results of these data reduction efforts have been compared with vibration tolerance limits. Results of the tests indicate significant reductions in vibration levels in the bearing gas-lubricant films, particularly in the rigidly-mounted pads. The utility of the gas-lubricated damper for limiting rotor-bearing system vibrations in high-speed turbomachinery has thus been demonstrated.

Tessarzik, J. M.↗
NASA NTRS1976

Apollo Telescope Mount: A Partial Listing of Scientific Publications and Presentations

This report is a compilation of bibliographies from the principal investigator groups of the Apollo Telescope Mount (Skylab solar observatory facility) which gathered data from May 28, 1973, to February 8, 1974. The analysis of these data is presently under way and is expected to continue for several years. The publications listed in this report are divided into thy; following categories: (1) Journal Publications, (2) Journal Publications Submitted, (3) Other Publications, (4) Presentations--National and International Meetings, and (5) Other Presentations. An author index is also included.

John M Reynolds↗
NASA NTRS1976

Secondary aerospace batteries and battery materials: A bibliography, 1969 - 1974

This annotated bibliography on the subject of secondary aerospace battery materials and related physical and electrochemical processes was compiled from references to journal articles published between 1969 and 1974. A total of 332 citations are arranged in chronological order under journal titles. Indices by system and component, techniques and processes, and author are included.

Mcdermott, P.↗
NASA NTRS1977

Mount for continuously orienting a collector dish in a system adapted to perform both diurnal and seasonal solar tracking

A collector dish is continuously oriented toward the sun in a system adapted to perform both diurnal and seasonal solar tracking. The mount is characterized by a rigid, angulated axle having a linear midportion supporting a collector dish, and oppositely extended end portions normally related to the midportion of the axle and received in spaced journals. The longitudinal axis of symmetry for the midportion of the axle is coincident with a seasonal axis while the axes of the journals are coincident with a diurnal axis paralleling the earth's polar axis. Drive means are provided for periodically displacing the axle about the diurnal axis at a substantially constant rate, while other drive means are provided for periodically indexing the dish through 1 deg about the seasonal axis whereby the position of the dish relative to the axle is varied for accommodating seasonal tracking as changes in the angle of inclination of the polar axis occurs.

Brantley, L. W., Jr.↗
NASA NTRS1977

Apollo Telescope Mount: A Partial Listing of Scientific Publications and Presentations, Supplement 1

This report supplements NASA TM X-73300, April 15, 1976. These reports are compilations of bibliographies from the principal investigator groups of the Apollo Telescope Mount (Skylab solar observatory facility) that gathered data from May 28, 1973, to February 8, 1974. The analysis of these data is presently under way and is expected to continue for several years. The publications listed in this report are divided into the following categories: (1) Journal Publications, (2) Journal Publications Submitted, (3) Other Publications, (4) Presentations -National and International Meetings, and (5) Other Presentations. An author index is included together with errata for the first report.

John M Reynolds↗
NASA NTRS1978

Foil bearings for axial and radial support of high speed rotors: Design, development, and determination of operating characteristics

Flexible surface thrust and journal foil bearings were fabricated, and their performance was demonstrated, both individually and jointly as a unified rotor support system. Experimental results are documented with graphs and oscilloscopic data of trajectories, waveforms, and scans of amplitude response. At speeds of 40,000 to 45,000 rpm and a mean clearance of the order of 15 to 20 micrometers (600 to 800 micrometers, the resilient, air lubricated, spiral groove thrust bearings support a load of 127 N (29 lb; 13 kgf), equivalent to 3.0 N/sq cm (4.5 lb/sq in 0.31 kgf sq cm). Journal bearings with polygonal sections provided stable and highly damped supports at speeds up to 50,000 rpm.

Licht, L.↗
NASA NTRS1977

Bibliography of Lewis Research Center technical contributions announced in 1976

Abstracts of Lewis authored publications and publications resulting from Lewis managed contracts which were announced in the 1976 issues of STAR (Scientific and Technical Aerospace Reports) and IAA (International Aerospace Abstracts) are presented. Research reports, journal articles, conference presentations, patents and patent applications, and these are included. The arrangement is by NASA subject category. Citations indicate report literature (identified by their N-numbers) and the journal and conference presentations (identified by their A-numbers). A grouping of indexes helps locate specific publications by author (including contractor authors), contractor organization, contract number, and report number.

Source record↗
NASA NTRS1978

Apollo Telescope Mount: A Partial Listing of Scientific Publications, Supplement 2

This report supplements NASA TM X-73300 and NASA TM X-73393. These reports are compilations of bibliographies from the principal investigator groups of the Apollo Telescope Mount (Skylab solar observatory facility) that gathered data from May 28, 1973, to February 8, 1971. The analysis of these data is presently under way and is expected to continue for several years. The publications listed in this report are divided into the following categories: (1) Journal Publications, (2) Journal Publications Submitted, (3) Other Publications, (4) Presentations—National and International Meetings, and (5) Other Presentations. An author index is included together with errata for the first report.

John M Reynolds↗
NASA NTRS1979

Apollo telescope mount: A partial listing of scientific publications and presentations, supplement 3

Compilations of bibliographies from the principal investigator groups of the Skylab solar observatory facility that gathered data from May 28, 1973, to February 8, 1974 are presented. The analysis of these data is presently under way. The publications listed are divided into the following categories: (1) journal publications; (2) journal publications submitted; (3) other publications; (4) presentations-national and international meetings; and (5) other presentations.

Reynolds, J. M.↗
NASA NTRS1979

A study of the potential impacts of space utilization

Because the demand for comprehensive impact analysis of space technologies will increase with the use of space shuttles, the academic social sciences/humanities community was surveyed in order to determine their interests in space utilization, to develop a list of current and planned courses, and to generate a preliminary matrix of relevant social sciences. The academic scope/focus of a proposed social science space-related journal was identified including the disciplines which should be represented in the editorial board/reviewer system. The time and funding necessary to develop a self-sustaining journal were assessed. Cost income, general organizational structure, marking/distribution and funding sources were analyzed. Recommendations based on the survey are included.

Cheston, T. S.↗
NASA NTRS1980

Friction and wear results from sputter-deposited chrome oxide with and without nichrome metallic binders and interlayers

Friction and wear tests were conducted on optimized sputtered Cr2O3 and Cr2O3 with metallic binder coatings. The coatings were applied on the bearing surface of journal foil air bearings and were tested against chrome-carbide-coated journal surfaces. The objective of the study was to develop a coating system which would withstand 9000 start-stops and high-speed rubs (maximum acceleration, 100 gs) in temperatures ranging from room temperature to 650 C. The Cr2O3 coating completed the test sequence and the coating consisting of Cr2O3 with metallic binders completed 3000 start-stops. The coefficient of friction of the coatings at 650 C was found to be about half that at room temperature. It was concluded, therefore, that the coatings should perform much better in a high temperature environment alone. The decrease in friction at high temperature is attributed to oxidation and interactions of the coatings and substrates at the interface temperature.

Bhushan, B.↗
NASA NTRS1982

Measurement of interstage fluid-annulus dynamical properties

The work described in this paper is part of an Electric Power Research Institute sponsored effort to improve rotor vibrational performance on power plant feed water pumps. A major objective of this effort is to reduce vibration levels by devising inter-stage sealing configurations with optimized damping capacity, realizing that the typical multi-stage centrifugal pump has several ore inter-stage fluid annuli than it has journal bearings. Also, the fluid annuli are distributed between the journal bearings where vibration levels are highest and can therefore be 'exercised' more as dampers than can the bearings. Described in this paper is a test apparatus which has been built to experimentally determine fluid-annulus dynamical coefficients for various configurations of inter-stage sealing geometry.

Adams, M. L.↗
NASA NTRS1980

Heat Capacity Mapping Mission (HCMM) Notification Efforts

To encourage wide use of the Heat Capacity Mapping Mission (HCMM) data, especially among the scientific community, special notifications were prepared to inform them about the data's availability, its form, and the procedures for obtaining them. To achieve the widest distribution to the primary audiences of interest, mailings were made to scientists associated with the OSTA Resource Observation Division programs and to scientific and professional societies and journals. Accompanying the notifications to the societies and journals were samples of the HCMM imagery and a description of the image's predominant characteristics. A follow-up survey was completed to determine the effectiveness of the HCMM notifications.

Source record↗
NASA NTRS1984

NASA Scientific and Technical Information System (STI) and New Directory of Numerical Data Bases

The heart of NASA's STI system is a collection of scientific and technical information gathered from worldwide sources. Currently containing over 2.2 million items, the data base is growing at the rate of 140,000 items per year. In addition to announcement journals, information is disseminated through the NASA RECON on-line bibliographic search system. One part of RECON is NALNET which lists journals and books held by the NASA Centers. Another service now accessible by recon is a directory of numerical data bases (DND) which can be shared by NASA staff and contractors. The DND describes each data base and gives the name and phone number of a contact person. A NASA-wide integrated library system is being developed for the Center libraries which will include on-line catalog and subsystems for acquisition, circulation control, information retrieveal, management information, and an authority file. These subsystems can interact with on-line bibliographic, patron, and vendor files.

Wilson, J.↗