SEARCH · Search NASA

Results for “level 2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

All sources NASA NTRS DOE OSTI

DOE OSTI2026

Direct Air Capture Using Trapped Small Amines in Hierarchical Nanoporous Capsules on Porous Electrospun Fibers (Final Technical Report)

This report summarizes the carbon capture research and development conducted by The State University of New York at Buffalo (UB) and GTI Energy (GTI) for award “DE-FE0031969: Direct Air Capture Using Trapped Small Amines in Hierarchical Nanoporous Capsules on Porous Electrospun Fibers” sponsored by the U.S. Department of Energy (DOE). The objective of this project is to develop an innovative sorbent structure of trapped small amines in HNC embedded in PEF for DAC. This involves tailoring both sorbent and PEF materials to achieve a compact system for DAC with high capacity for CO 2 at concentrations typically available in air and at near ambient conditions. An innovative sorbent structure of trapped small amines in hierarchical nanoporous capsules (HNC) embedded in porous electrospun fibers (PEF) was developed for direct air capture (DAC). This involves tailoring both sorbent and PEF materials to achieve a compact system for DAC with high capacity for CO 2 at concentrations typically available in air and at near ambient conditions. An interfacial polymerization process was developed, which utilized loaded amines inside mesoporous silica and trimesoyl chloride (TMC) dissolved in organic solvents as the precursors, to generate a polyamide (PA) coating layer on mesoporous silica and thus trap amines. Reaction conditions, including TMC concentration, organic solvents, reaction time, etc., for interfacial polymerization were optimized to effectively trap loaded amines, and cyclic heating-cooling operation was conducted to evaluate the coating quality. Larger pore volume mesoporous silica was also synthesized to increase amine loading and thus increase CO 2 capacity. The optimized sorbent material exhibited CO 2 capacity as high as 4.88 mmol/g under humid DAC conditions and negligible loss (<1%) during 10 cyclic heating-cooling operations. The optimized PA-coated sorbent also showed fast adsorption and desorption kinetics, with <20% t1/2 increase compared to uncoated sorbent. PEF fabrication conditions, including organic solvents for dissolving core and shell polymers, voltage, distance from the nozzle to the collection panel, etc. were adjusted to better incorporate HNC. After incorporating the optimized sorbent material into PEF, the structured sorbent had a CO 2 capacity of approximately 4.0 mmol/g under humid DAC conditions, with capacity loss of 0.17% per cycle and t1/2 increase less than 10%. A techno-economic analysis (TEA) for the process design for a DAC system based on our developed sorbent structure of trapped small amines in HNC embedded in PEF was conducted. The process design included process description and major equipment sizing and energy and mass balances in addition to scale-up research results and estimated capture cost. Aspen Adsorption Simulator was used to fit the experimentally measured breakthrough curves and extract equilibrium and kinetic data of the optimized sorbent. Our results indicated that for a DAC plant with CO 2 productivity of 3,000 tonne/year, the levelized cost of CO 2 capture was $\$$612/tonne, with the largest contribution of 44.33% from the fixed operation cost. Increasing CO 2 productivity, while maintaining similar fixed operation cost, is expected to significantly reduce the CO 2 capture cost. A sensitivity study was also conducted to understand the influence of total plant cost, sorbent cost, CO 2 concentration in the feed, sorbent mat lifetime, sorbent regeneration electricity, and adsorption blower pressure drop on the levelized cost of CO 2 capture, revealing a capture cost range of $\$$520-870/tonne.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Cobalt as a promising dopant for producing semi-insulating β-Ga 2 O 3 crystals: Charge state transition levels from experiment and theory

Optical absorption and photoconductivity measurements of Co-doped β-Ga 2 O 3 crystals reveal the photon energies of optically excited charge transfer between the Co related deep levels and the conduction or valence band. The corresponding photoionization cross sections are fitted by a phenomenological model considering electron–phonon coupling. The obtained fitting parameters: thermal ionization (zero-phonon transition) energy, Franck–Condon shift, and effective phonon energy are compared with corresponding values predicted by first principle calculations based on density functional theory. A (+/0) donor level ~0.85 eV above the valence band maximum and a (0/-) acceptor level ~2.1 eV below the conduction band minimum are consistently derived. Temperature-dependent electrical resistivity measurement at elevated temperatures (up to 1000 K) yields a thermal activation energy of 2.1 ± 0.1 eV, consistent with the position of the Co acceptor level. Furthermore, the results show that Co doping is promising for producing semi-insulating β-Ga 2 O 3 crystals.

Materials science↗

DOE OSTI2024

Metaproteomics-informed stoichiometric modeling reveals the responses of wetland microbial communities to oxygen and sulfate exposure

Abstract Climate changes significantly impact greenhouse gas emissions from wetland soil. Specifically, wetland soil may be exposed to oxygen (O 2 ) during droughts, or to sulfate (SO 4 2- ) as a result of sea level rise. How these stressors – separately and together – impact microbial food webs driving carbon cycling in the wetlands is still not understood. To investigate this, we integrated geochemical analysis, proteogenomics, and stoichiometric modeling to characterize the impact of elevated SO 4 2- and O 2 levels on microbial methane (CH 4 ) and carbon dioxide (CO 2 ) emissions. The results uncovered the adaptive responses of this community to changes in SO 4 2- and O 2 availability and identified altered microbial guilds and metabolic processes driving CH 4 and CO 2 emissions. Elevated SO 4 2- reduced CH 4 emissions, with hydrogenotrophic methanogenesis more suppressed than acetoclastic. Elevated O 2 shifted the greenhouse gas emissions from CH 4 to CO 2 . The metabolic effects of combined SO 4 2- and O 2 exposures on CH 4 and CO 2 emissions were similar to those of O 2 exposure alone. The reduction in CH 4 emission by increased SO 4 2- and O 2 was much greater than the concomitant increase in CO 2 emission. Thus, greater SO 4 2- and O 2 exposure in wetlands is expected to reduce the aggregate warming effect of CH 4 and CO 2 . Metaproteomics and stoichiometric modeling revealed a unique subnetwork involving carbon metabolism that converts lactate and SO 4 2- to produce acetate, H 2 S, and CO 2 when SO 4 2- is elevated under oxic conditions. This study provides greater quantitative resolution of key metabolic processes necessary for the prediction of CH 4 and CO 2 emissions from wetlands under future climate scenarios.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2023

Understanding the performance of membrane for direct air capture of CO 2

Abstract Direct air capture (DAC) of CO 2 is becoming increasingly important for reducing greenhouse gas concentrations in the atmosphere. However, the cost and energy requirements associated with DAC make it less economically feasible than carbon capture from flue gases. While various methods like solid sorbents and gas–liquid absorption have been explored for DAC, membrane processes have only recently been investigated. The objective of this study is to examine the separation performance of a membrane unit for capturing CO 2 from ambient air. The performance of a membrane depends on several factors, including the composition of the feed gas, pressure ratio, material selectivity, and membrane area. The single‐stage separation process with the co‐current flow and constant permeability flux model is evaluated using a commercial module integrated with a process simulator to separate a binary mixture of carbon dioxide and nitrogen to assess the sensitivity of selectivity on purity and recovery of CO 2 in permeate, and power requirement. Additionally, three levels of CO 2 reduction from the feed stream to the retentate stream (25%, 50%, and 75%) are studied. A trade‐off between purity and recovery factor is observed, and achieving high purity in permeate requires high concentration in the retentate.

Panja, Palash↗

DOE OSTI2024

Scaling Individual Tree Transpiration With Thermal Cameras Reveals Interspecies Differences to Drought Vulnerability

Abstract Understanding tree transpiration variability is vital for assessing ecosystem water‐use efficiency and forest health amid climate change, yet most landscape‐level measurements do not differentiate individual trees. Using canopy temperature data from thermal cameras, we estimated the transpiration rates of individual trees at Harvard Forest and Niwot Ridge. PT‐JPL model was used to derive latent heat flux from thermal images at the canopy‐level, showing strong agreement with tower measurements ( R 2 = 0.70–0.96 at Niwot, 0.59–0.78 at Harvard at half‐hourly to monthly scales) and daily RMSE of 33.5 W/m 2 (Niwot) and 52.8 W/m 2 (Harvard). Tree‐level analysis revealed species‐specific responses to drought, with lodgepole pine exhibiting greater tolerance than Engelmann spruce at Niwot and red oak showing heightened resistance than red maple at Harvard. These findings show how ecophysiological differences between species result in varying responses to drought and demonstrate that these responses can be characterized by deriving transpiration from crown temperature measurements.

Javadian, Mostafa↗

DOE OSTI2024

Energy burden aware and thermal resilience informed thermal energy storage system planning for disadvantaged communities

Disadvantaged communities often face a disproportionate energy burden because they need to allocate a higher percentage of their income to energy costs. More importantly, climate change-induced extreme weather events, such as heat waves and severe cold snaps, exacerbate these communities’ energy burdens. As a result, low- and medium-income communities are more likely to experience energy supply disruptions, increased health risks, and elevated energy bills because of inadequate thermal insulation and airtightness in their houses. Thermal energy storage (TES) systems, such as large-scale (community-level) geothermal energy storage and small-scale (building-level) phase change material (PCM)–based storage, have a great potential to improve building energy efficiency and to enhance thermal comfort, load shifting, and integration with renewable energy. The objective of this study is to optimally allocate building level PCM-based TES systems at the community level by considering energy equity and extreme weather effects. To this end, we developed an energy burden and thermal resilience–informed TES system planning framework, which includes three modules: (1) a community-level energy burden and thermal resilience assessment module, (2) building-level a TES system integration and assessment module, and (3) a community-level optimal planning module. Case studies were conducted on four disadvantaged communities in Montgomery and Shelby Counties in Tennessee with energy burdens >10% and with high percentages of people of color. The results indicate that this comprehensive planning framework can assist disadvantaged communities in reducing their energy burden and in bolstering their resilience against the adverse effects of climate change.

Shen, Zhenglai↗

DOE OSTI2020

Hyperfine and quadrupole interactions for Dy isotopes in DyPc 2 molecules

Nuclear spin levels play a vital role in understanding magnetization dynamics and implementation and control of quantum bits in lanthanide-based single-molecule magnets. We investigate the hyperfine and nuclear quadrupole interactions for 161 Dy and 163 Dy nuclei in anionic DyPc 2 (Pc=phthalocyanine) single-molecule magnets, using multiconfigurational ab initio methods (beyond density-functional theory) including spin–orbit interaction. The two isotopes of Dy are chosen because the others have zero nuclear spin. Both isotopes have the nuclear spin I =5/2, although the magnitude and sign of the nuclear magnetic moment differ from each other. The large energy gap between the electronic ground and first-excited Kramers doublets, allows us to map the microscopic hyperfine and quadrupole interaction Hamiltonian onto an effective Hamiltonian with an electronic pseudo-spin that corresponds to the ground Kramers doublet. Our ab initio calculations illustrate that the coupling between the nuclear spin and electronic orbital angular momentum contributes the most to the hyperfine interaction and that both the hyperfine and nuclear quadrupole interactions for 161 Dy and 163 Dy nuclei are much smaller than those for the 159 Tb nucleus in TbPc 2 single-molecule magnets. The calculated separations of the electronic-nuclear levels are comparable to experimental data reported for 163 DyPc 2 . We demonstrate that hyperfine interaction for the Dy Kramers ion leads to tunnel splitting (or quantum tunneling of magnetization) at zero field. This effect does not occur for TbPc 2 single-molecule magnets. The magnetic field values of the avoided level crossings for 161 DyPc 2 and 163 DyPc 2 are found to be noticeably different, which can be observed from the experiment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2021

Combined Mesonet and Tracker

Title: Combined Mesonet and Trackers (UNL Mobile Mesonets) Authors University of Nebraska PI: Adam Houston, UNL Professor (ahouston2@unl.edu) Mailing Address: 126 Bessey Hall P.O. Box 880340 Lincoln, NE 68588-0340 CoMeT Overview The University of Nebraska-Lincoln operates three Combined Mesonet and Tracker (CoMeTs). CoMeTs are Ford Explorers (model years 2015, 2017, and 2019) with forward-mounted suites of meteorological sensors and dual moonroofs, combining the capability of a mobile mesonet to collect near-surface observations with the capability of an unmanned aircraft systems (UAS) tracker vehicle, which enables an observer in the second row of seats to see the aircraft and maintain compliance with Federal Aviation Administration policies on UAS operation. The CoMeTs collect observations of slow temperature and humidity at ~2 m above ground level (AGL) using a Vaisala HMP155A, fast temperature at ~2 m AGL using a Campbell Scientific 109SS-L thermistor, pressure at ~2.5 m AGL using a Vaisala PTB210, wind speed and direction at ~3.25 m AGL using an R.M. Young 05103 propeller anemometer, and vehicle heading using a KVH Industries C-100 fluxgate compass (Barbieri et al. 2019). The HMP155A and 109SS-L thermistor are shielded and aspirated within a U-tube (Waugh and Frederickson 2010; Houston et al. 2016). This list of sensors is also included in the CoMeT data file metadata. Manufacturer specifications for these instruments are given in Table 1 of Hanft and Houston (2018). The reported measured quantities are summarized below.CoMeT-3 was funded through an equipment allocation included in the NSF TORUS award (AGS-1824649). Instrument Description The specific sensors included on each CoMeT are summarized in the table at the end of this section. In general each CoMeT collects observations of slow temperature and humidity at ~2 m above ground level (AGL) using a Vaisala HMP155, fast temperature at ~2 m AGL using a Campbell Scientific 109SS-L thermistor, pressure at ~2.5 m AGL using a Vaisala PTB210 barometer with a Gill pressure port, wind speed and direction at ~3.25 m AGL using an R.M. Young 05103 propeller anemometer, position using a Garmin 19x HVS receiver, and vehicle heading using a KVH Industries C-100 fluxgate compass. The HMP155 and 109SS are shielded and aspirated within a U-tube (Waugh and Frederickson 2010; Houston et al. 2016). Fast temperature and corrected RH measurements (using sensors housed within the U-tube) have a time constant of 10-12 s based on data collected across a temperature and RH shock during the CLOUD-MAP 2017 calibration/validation tests on June 26, 2017. Vehicle speed was < 10 kts for this test. CoMeT-1 CoMeT-2 CoMeT-3 Slow Temperature Slow RH Vaisala HMP155A-L20-PT Part #: 22280-7 Vaisala HMP155E Part #: E1AA11A0B1A1A0A Vaisala HMP155E Part #: E1AA11A0B1A1A0A Fast temperature Campbell Scientific 109SS-L20-PT Part #: 21448-3 Campbell Scientific 109SS-L12-PW Part #: 21448-109 Campbell Scientific 109SS-L12-PW Part #: 21448-150 Pressure Vaisala PTB-210 Part #: A1A1B Gill Pressure Port Part #: 61002 Vaisala PTB-210 Part #: A1A1B Gill Pressure Port Part #: 61002 Vaisala PTB-210 Part #: A1A1B Gill Pressure Port Part #: 61002 Wind RM Young 05103-L20-PT Part #: 18435-310 RM Young 05103-L20-PW Part #: 18435-244 RM Young 05103-L20-PW Part #: 18435-244 GPS Garmin GPS 19x HVS (NMEA 0183) Part #: 010-01010-00 Garmin GPS 19x HVS (NMEA 0183) Part #: 010-01010-00 Garmin GPS 19x HVS (NMEA 0183) Part #: 010-01010-00 Compass KVH C-100 Part #: 01-0177-15 KVH C-100 Part #: 01-0177-15 KVH C-100 Part #: 01-0177-15 Logger Campbell Scientific CR6-NA-XT-SW Part #: 28385-9 Campbell Scientific CR6-WIFI-XT-SW Part #: 28385-6 Campbell Scientific CR6-WIFI-XT-SW Part #: 28385-6 Data Collection and Real-Time Processing The reported measured quantities are summarized in the table below. Quantity Units Source Epoch time Seconds GPS Latitude and longitude Degrees GPS Altitude m GPS Pressure hPa PTB210 Temperature (fast) deg C 109SS-L Temperature (slow) deg C HMP155 RH (slow) % HMP155 Vehicle speed m/s GPS Vehicle heading deg C-100 and GPS In addition to the measured variables, several derived variables are calculated. Corrected/fast relative humidity (%) Relative humidity is adjusted to the fast temperature following Richardson et al. (1998) and Houston et al. (2016). Water vapor mixing ratio (g/kg) Dew point temperature (°C) Potential temperature (Kelvin) Virtual potential temperature (Kelvin) Equivalent potential temperature (Kelvin) Regular intercomparisons between all three CoMeTs were performed during TORUS 2019. Comparisons were also conducted between CoMeT-1 and CoMeT-2 during LAPSE-RATE (2018) on 14 July. In these intercomparisons, the vehicles were parked adjacent to each other aligned perpendicular to (and facing into) the wind. To minimize engine heating effects, intercomparisons were only conducted when the wind speed was >10 kts. Data Format Original data files for each deployment are saved as text files and then converted to NetCDF. NetCDF versions have units that are CF compliant and may not match the original units in the txt files. The naming convention for the NetCDF files is as follows: UNL.CoMeT3.{deployment date YYYYMMDD}.{start time of observation collection in UTC HHMM}.L2.{post-processing codes}.cdf example: UNL.CoMeT3.20190627.1931.L2.g1.f1.cdf Post-processing codes are included to track modifications to the raw data. These codes are closely connected to error flags associated with each record. Each letter corresponds to a particular instrument: g: GPS p: Barometer tf: Fast temperature ts: Slow temperature rh: Relative humidity f: Compass w: Wind monitor a: All instruments Each number corresponds to a particular post-processing action described more below. Measured and derived variables are included in the following table. Variable Heading Standard Name Units time Time seconds since 00:00:00, 01-01-1970 Alt Altitude meters lat Latitude degrees north lon Longitude degrees east fast_temp Air Temperature kelvin slow_temp Air Temperature kelvin pressure Air Pressure pascals logger_RH Relative Humidity percent calc_corr_RH Relative Humidity percent wind_speed Wind Speed meters per second wind_dir Wind From Direction degrees vehicle_dir Vehicle Direction degrees dewpoint Dew Point Temperature kelvin mixing_ratio Humidity Mixing Ratio g/g theta Air Potential Temperature kelvin theta_v Virtual Potential Temperature kelvin theta_e Equivalent Potential Temperature Kelvin error_flag The error_flag variable is a string that matches the post-processing codes listed above. All instruments will have an associated code, but will have a “0” if the datum is unchanged from the initial processed value. Error Codes The following table summarizes the error codes for data collected before 2020: Error Code Relevant CoMeT Description g1 1,2,3 Exact correction. GPS position and time reprocessed from raw data g2 1 As far as we can tell this is an exact correction to an error in the GPS time. During the correct time periods the time suddenly went backwards ~250s and stayed at this offset for 750s when it corrected itself. The offset was applied to the “time warp” period. p1 2 Approximate correction. Hole in the pressure tube connecting the pressure port to the barometer. Resulted in erroneously low air pressure measurements when the vehicle was in motion. Derived variables recalculated (dew point temperature [e depends on qv and p], water vapor mixing ratio, potential temperature, virtual potential temperature, equivalent potential temperature) a1 3 Exact correction. Missing data reprocessed from raw data a2 1 Bug fix to bias correction for ts1, ts2, and rh1: water vapor mixing ratio was off by a factor of 10 and virtual potential temperature was wrong because of this. f1 3 No correction, missing data. Fluxgate compass inoperable. Wind speed and direction calculated using GPS-derived vehicle heading instead. rh1 1 Approximate correction. Constant bias of +1.7% removed from relative humidity. Derived variables recalculated (corrected/fast relative humidity, dew point temperature, water vapor mixing ratio, virtual potential temperature, equivalent potential temperature) ts1 1 Approximate correction. Constant bias of +0.6 K removed from slow temperature. Derived variables recalculated (corrected/fast relative humidity, dew point temperature, water vapor mixing ratio, virtual potential temperature, equivalent potential temperature) ts2 1 Approximate correction. Constant bias of +1.0 K removed. Derived variables recalculated (corrected/fast relative humidity, dew point temperature, water vapor mixing ratio, virtual potential temperature, equivalent potential temperature) References Bolton, D., 1980: The Computation of Equivalent Potential Temperature. Mon. Wea. Rev., 108, 1046–1053, https://doi.org/10.1175/1520-0493(1980)108<1046:TCOEPT>2.0.CO;2. Hanft, W., and A. L. Houston, 2018: An Observational and Modeling Study of Mesoscale Air Masses with High Theta-E. Mon. Wea. Rev., 146, 2503–2524, https://doi.org/10.1175/MWR-D-17-0389.1.Wexler Houston, A. L., R. J. Laurence III, T. W. Nichols, S. Waugh, B. Argrow, and C. L. Ziegler, 2016: Intercomparison of unmanned aircraft-borne and mobile mesonet atmospheric sensors. Journal of Atmospheric and Oceanic Technology. 33, 1569-1582, doi: 10.1175/JTECH-D-15-0178.1. Lowe, P. R., 1977: An Approximating Polynomial for the Computation of Saturation Vapor Pressure. J. Applied Meteorology, 16, 100–103. Richardson, S. J., S. E. Frederickson, F. V. Brock, and J. A. Brotzge, 1998: Combination temperature and relative humidity probes: Avoiding large air temperature errors and associated relative humidity errors. Preprints, 10th Symp. On Meteorological Observations and Instrumentation, Phoenix, AZ, Amer. Meteor. Soc., 278–283. Waugh, S., and S. E. Frederickson, 2010: An improved aspirated temperature system for mobile meteorological observations, especially in severe weather. 25th Conf. on Severe Local Storms, Denver, CO, Amer. Meteor. Soc., P5.2. [Available online at https://ams.confex.com/ams/25SLS/techprogram/paper_176205.htm.]

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2019

Moisture Corrosion of LiH: A Kinetic Investigation by DRIFT Spectroscopy

Lithium hydride (LiH) is a unique, ionic compound with applications in a variety of industries. Unfortunately, LiH is very reactive toward H 2 O even at ppm levels, forming oxide (Li 2 O) and hydroxide (LiOH) corrosion layers while outgassing H 2 . An effective means to eliminate unwanted outgassing is vacuum-heating to convert LiOH into Li 2 O, although subsequent re-exposure to moisture during transport/handling reconverts some Li 2 O back to LiOH. A corrosion growth model for previously vacuum-baked LiH is necessary for long-term prediction of the hydrolysis of LiH. In this work, a para-linear hydroxide corrosion growth model is proposed for the reaction of previously vacuum-baked LiH samples with moisture. This model, composed of two competing diffusion reaction fronts at the LiOH/Li 2 O and Li 2 O/LiH interfaces, is validated experimentally by subjecting a previously vacuum-baked polycrystalline LiH sample to 35 ppm of H 2 O at room temperature while monitoring the corrosion growth as a function of time with diffuse-reflectance infrared Fourier transform (DRIFT) spectroscopy. The para-linear growth model for the hydrolysis of previously vacuum-baked LiH proposed in this report can also serve as a template for the hydrolysis of other hygroscopic oxides grown on metal or metal hydride substrates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Airborne Lidar Measurements of XCO 2 in Synoptically Active Environment and Associated Comparisons With Numerical Simulations

Frontal boundaries have been shown to cause large changes in CO 2 mole-fractions, but clouds and the complex vertical structure of fronts make these gradients difficult to observe. It remains unclear how the column average CO 2 dry air mole-fraction (XCO 2 ) changes spatially across fronts, and how well airborne lidar observations, data assimilation systems, and numerical models without assimilation capture XCO 2 frontal contrasts (ΔXCO 2 , i.e., warm minus cold sector average of XCO 2 ). We demonstrated the potential of airborne Multifunctional Fiber Laser Lidar (MFLL) measurements in heterogeneous weather conditions (i.e., frontal environment) to investigate the ΔXCO 2 during four seasonal field campaigns of the Atmospheric Carbon and Transport-America (ACT-America) mission. Most frontal cases in summer (winter) reveal higher (lower) XCO 2 in the warm (cold) sector than in the cold (warm) sector. During the transitional seasons (spring and fall), no clear signal in ΔXCO 2 was observed. Intercomparison among the MFLL, assimilated fields from NASA's Global Modeling and Assimilation Office (GMAO), and simulations from the Weather Research and Forecasting-—Chemistry (WRF-Chem) showed that (a) all products had a similar sign of ΔXCO 2 though with different levels of agreement in ΔXCO 2 magnitudes among seasons; (b) ΔXCO 2 in summer decreases with altitude; and (c) significant challenges remain in observing and simulating XCO 2 frontal contrasts. A linear regression analyses between ΔXCO 2 for MFLL versus GMAO, and MFLL versus WRF-Chem for summer-2016 cases yielded a correlation coefficient of 0.95 and 0.88, respectively. The reported ΔXCO 2 variability among four seasons provide guidance to the spatial structures of XCO 2 transport errors in models and satellite measurements of XCO 2 in synoptically-active weather systems.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Electronic structure and magnetic tendencies of trilayer La 4 Ni 3 O 10 under pressure: Structural transition, molecular orbitals, and layer differentiation

Motivated by the recent observation of superconductivity in the pressurized trilayer Ruddlesden-Popper (RP) nickelate La 4 Ni 3 O 10 , we explore its structural, electronic, and magnetic properties as a function of hydrostatic pressure from first-principles calculations. We find that an orthorhombic (monoclinic)-to-tetragonal transition under pressure takes place concomitantly with the onset of superconductivity. The electronic structure of La 4 Ni 3 O 10 can be understood using a molecular trimer basis wherein n molecular subbands arise as the d z 2 orbitals hybridize strongly along the c axis within the trilayer. The magnetic tendencies indicate that the ground state at ambient pressure is formed by nonmagnetic inner planes and stripe-ordered outer planes that are antiferromagnetically coupled along the c axis, resulting in an unusual ↑, 0, ↓ stacking that is consistent with the spin density wave model previously suggested by neutron diffraction. Such a state is destabilized at the pressure where superconductivity arises. Despite the presence of d z 2 states at the Fermi level, the d x 2 –y 2 orbitals also play a key role in the electronic structure of La4Ni3O10. Finally, this active role of the d x 2 –y 2 states in the low-energy physics of the trilayer RP nickelate, together with the distinct electronic behavior of the inner and outer planes, resembles the physics of multilayer cuprates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2021

Excited Rydberg states in MoSe 2 /WSe 2 heterostructures

The functional form of Coulomb interactions in the transition metal dichalcogenides (TDMs) and other van der Waals solids is critical to many of their unique properties, e.g. strongly-correlated electron states, superconductivity and emergent ferromagnetism. This paper presents measurements of key excitonic energy levels in MoSe 2 /WSe 2 heterostructures. These measurements are obtained from resonance Raman experiments on specific Raman peaks only observed at excited states of the excitons. This data is used to validate a model of the Coulomb potential in these structures which predicts the exciton energies to within ~5 meV. This model is used to determine the effect of heterostructure formation on the single-particle band gaps of the layers and will have a wide applicability in designing the next generation of more complex TDM structures.

Materials Science↗

DOE OSTI2022

A Geospatial Cost Comparison of CO2 Plume Geothermal (CPG) Power and Geologic CO2 Storage

CO 2 Plume Geothermal (CPG) power plants can use gigatonne-levels of CO 2 sequestration to generate electricity, but it is unknown if the resources that support low-cost CPG power align with the resources that support low-cost CO 2 sequestration. Here, we estimate and compare the geospatially-distributed cost of CPG and CO 2 storage across a portion of North America. We find that the locations with lowest-cost CO 2 storage are different than the locations with lowest-cost CPG. There are also locations with low-cost CO 2 storage (<$5/tCO 2 ) that do not support CPG power generation due to insufficient reservoir transmissivity or temperature. Thus, CPG development may require electricity prices that are greater than the levelized cost of electricity (LCOE) to offset the increased cost of sequestration. We introduce the “Additional Cost of Electricity (ACOE)” metric to account for this cost and add it to the LCOE to calculate breakeven electricity prices that are required for CPG development. We find that breakeven prices are lower when new CO 2 injection wells are drilled specifically for CPG (i.e., “greenfield” CPG development) compared to if only existing CO 2 sequestration injection wells are used (i.e., “brownfield” CPG development). This is because comparatively few wells are needed for sequestration-only, and the increased power capacity from having more CPG wells outweighs the increased costs from more drilling. We also find that sequestered CO 2 could be used to approximately triple the United States geothermal electricity power capacity via a single CPG “sweet spot” in South Dakota, but that breakeven electricity price for this development is on the order of $200/MW e h.

15 GEOTHERMAL ENERGY↗

DOE OSTI2025

Reactive Capture and Conversion of Carbon Dioxide to Methanol with ZnZrO 2 and Alkali-Promoted Mg 3 AlO x Mixed Oxide Catalytic Sorbents

Reactive capture and conversion (RCC) explores the use of a single-unit process to capture CO 2 and produce a product, in this case, methanol (MeOH). In this study, different configurations of a catalytic sorbent (CS) composed of ZnZrO 2 catalyst and Mg 3 AlO x sorbent with and without alkali modification are evaluated for CO 2 adsorption, steady-state catalysis with cofed CO 2 and H 2 , and transient RCC performance. A catalyst composed of a physical mixture of Mg 3 AlO x with ZnZrO 2 resulted in a slight increase in CO 2 uptake, with a low impact on the catalytic activity and RCC of the materials compared to ZnZrO 2 alone. In contrast, Na impregnation significantly increased the level of CO 2 uptake from 0.28 mmol/g (ZnZrO 2 alone) to 0.6 and 1.1 mmol/g for the CS with Na on the catalyst or Mg 3 AlO x , respectively. However, Na impregnation reduced the CO 2 conversion rate and MeOH selectivity during steady-state cofeed experiments at 300 °C and 6 bar. In contrast to steady-state catalysis conditions, RCC, which is a cyclic capture and conversion process, creates dynamic CO 2 and H 2 surface coverages, favoring CH 4 in the early stages of the conversion step and then CO and MeOH as the catalyst CO 2 coverage reduces. The highest MeOH productivity during RCC was achieved with CS that balanced the CO 2 uptake with only moderate catalyst rate reductions caused by Na addition. The optimal material, ZnZrO 2 +10%Na/Mg 3 AlO x , achieved a CO 2 uptake of 0.8 mmol/g and a MeOH productivity of 0.5 mmol/g with 100% selectivity at 260 °C and 6 bar during RCC. This marks the highest RCC MeOH productivity reported to date, although the process needs further optimization and even with optimization, may remain impractical. The results further demonstrate that optimization of catalytic sorbents under steady-state flow conditions does not easily correlate to transient capture and conversion cycles for methanol synthesis from CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Rotational state-to-state transition rate coefficients for H 2 O + H 2 O collisions at nonequilibrium conditions

Aims.The goal is to develop a database of rate coefficients for rotational state-to-state transitions in H 2 O + H 2 O collisions that is suitable for the modeling of energy transfer in nonequilibrium conditions, in which the distribution of rotational states of H 2 O deviates from local thermodynamic equilibrium. Methods.A two-temperature model was employed that assumed that although there is no equilibrium between all possible degrees of freedom in the system, the translational and rotational degrees of freedom can be expected to achieve their own equilibria independently, and that they can be approximately characterized by Boltzmann distributions at two different temperatures,T kin andT rot . Results.Upon introducing our new parameterization of the collisional rates, taking into account their dependence on bothT kin andT rot , we find a change of up to 20% in the H 2 O rotational level populations for both ortho and para-H 2 O for the part of the cometary coma where the nonequilibrium regime occurs.

Astronomy & Astrophysics↗

DOE OSTI2023

Disruption Mitigation Solutions for Long Pulse Tokamaks (Final Technical Report)

The project "Disruption Mitigation Solutions for Long Pulse Tokamaks" was a collaborative effort between ORNL, GA, and UCSD. The main goal of the project was to study the injection of shattered cryogenic pellets (SPI) as a method of reducing wall damage from global tokamak plasma instabilities called disruptions. This work was primarily carried out in the JET tokamak in the UK. The team already had extensive experience studying PSI in the medium sized DIII-D tokamak in the US, but adding data from the larger JET tokamak enabled more confident extrapolation to the even larger planned ITER tokamak in France. Each of the collaborating institutions focused on different aspects of SPI disruption mitigation. The UCSD collaboration focused on the volume recombination of post-disruption runaway electron (RE) beams by massive hydrogen injection. Disruptions can sometimes result in the formation of toroidal (ring shaped) beams of highly energetic (relativistic) electron beams, which can cause serious local wall damage, even in present-day tokamaks. A promising method to reduce wall damage from the RE beams is to inject massive amounts of H 2 or D 2 into the beams using SPI. although the precise method by which the injected H 2 reducses RE wall damage is still being investigated, it seems clear that a necessary and required step for the reduction to occur is for the H 2 injection to cause volume recombination (free electron density reduction) of the background cold plasma surrounding the fast electron beam. The UCSD collaboration focused on answering the question of if this recombination could be achievable in the future reactor-size tokamak ITER using realistic levels of H 2 injection. A model capturing the most essential physics was developed and was constrained using both DIII-D and JET data. This model was then used to extrapolate to ITER. It was predicted that RE beam recombination should be achievable in ITER, although in the worst-case scenari (a 10 MA Re beam in ITER), recombination is barely achieved within the maximum allowed levels of H 2 injection.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Dissecting Nearby Galaxies with piXedfit. II. Spatially Resolved Scaling Relations among Stars, Dust, and Gas

We study spatially resolved scaling relations among stars, dust, and gas in ten nearby spiral galaxies. In a preceding paper, we have derived spatially resolved properties of the stellar population and dust by a panchromatic spectral energy distribution fitting using piXedfit. Now, we investigate resolved star formation (${{\rm{\Sigma }}}_{{{\rm{H}}}_{2}}$–ΣSFR–Σ * ) and dust scaling relations. While the relations with all subgalactic regions of the galaxies are reasonably tight (σ ≲ 0.3 dex), we find that most of the scaling relations exhibit galaxy-to-galaxy variations in normalization and shape. Only two relations of Σdust–Σgas and Σdust–${{\rm{\Sigma }}}_{{{\rm{H}}}_{2}}$ do not show noticeable galaxy-to-galaxy variations among our sample galaxies. We further investigate the correlations among the scaling relations. We find significant correlations among the normalization of the ${{\rm{\Sigma }}}_{{{\rm{H}}}_{2}}$–ΣSFR–Σ * relations, which suggest that the galaxies with higher levels of resolved H 2 fraction (${f}_{{{\rm{H}}}_{2}}$) tend to have higher levels of resolved star formation efficiency (SFE) and specific star formation rate (sSFR). We also observe that the galaxies with higher levels of resolved dust-to-stellar mass ratios tend to have higher levels of resolved sSFR, SFE, and ${f}_{{{\rm{H}}}_{2}}$. Moreover, we find that the galaxies with higher global sSFR and less compact morphology tend to have higher levels of the resolved sSFR, SFE, and ${f}_{{{\rm{H}}}_{2}}$, which can explain the variations in the normalization of the ${{\rm{\Sigma }}}_{{{\rm{H}}}_{2}}$–ΣSFR–Σ * relationships. Overall, we observe indications of the contributions of both global and local factors in governing the star formation process in galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2024

Complete Degradation of Be 2 C at Conditions Expected in Molten Salt Environments

This technical report is in submission of completion of the Level 3 milestone number M3AT24OR1101032, titled “Complete Degradation of Be 2 C at conditions expected in molten salt environments,” for the AT-24OR110103 “Beryllium Carbide as moderator for MSRs—ORNL” WBS number 2.04.11.01 within the larger Advanced Reactor Technologies program at Oak Ridge National Laboratory. This effort is an initial study of the viability of Be 2 C as a future neutron moderator for molten salt reactors and other high-temperature reactors. The research was awarded funding in September 2022, and this Level 2 milestone presents the work that completed by the end of July 2023. This work is a collaboration between Oak Ridge National Laboratory and the University of Michigan. This report discusses the status of this effort and planned work before the final reporting.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗