Search NASA⌕ Search

SEARCH · Search NASA

Results for “level sets”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

A closed-loop automatic control system for high-intensity acoustic test systems.

Description of an automatic control system for high-intensity acoustic tests in reverberation chambers. Working in 14 one-third-octave bands from 50 to 1000 Hz, the desired sound pressure levels are set into the memory in the control system before the test. The control system then increases the sound pressure level in the reverberation chamber gradually in each of the one-third-octave bands until the level set in the memory is reached. This level is then maintained for the duration of the test. Additional features of the system are overtest protection, the capability of 'holding' the spectrum at any time, and the presence of a total test timer.

Slusser, R. A.↗

Developing a Control Strategy for Minimum Airflow Setting Considering CO2 Level and Energy Consumption in a Variable Air Volume System

In an office building equipped with a Variable Air Volume (VAV) system, this paper introduces a novel method for controlling the minimum supply airflow fraction in each zone’s VAV box, having a capability to consider indoor CO2 level and energy consumption. The EnergyPlus simulation using the medium office prototype model was employed, which evaluated the performance of the energy and CO2 concentration for five VAV box airflow control strategies. The paper focuses on CO2 concentration-based airflow control method and compares it with other four methods including conventional single-max, reduced minimum single-max, demand-controlled ventilation(DCV), and dualmax control methods according to guidelines and common practices. The newly proposed control strategy directly correlates the minimum airflow fraction to CO2 concentration. A general trend emerged when comparing CO2 concentrations—lower minimum airflow fractions were associated with higher concentrations. The proposed control method effectively maintained low CO2 concentrations and enabled a lower airflow fraction contributing to energy consumption reduction. It was confirmed that heating energy consumption in climate zone 4A, 5B, and 6A showed a maximum saving of approximately 30% compared to the conventional single-max and dual max control strategies. It was found that cooling energy consumption in climate zone 4A and 6A can achieve a maximum saving of approximately 10% compared to the conventional control strategies. The proposed CO2 concentration-based control logic is promising as it not only improves the indoor air quality lowering the CO2 concentration in the occupied spaces, but also contributes to HVAC energy savings.

Lee, Jong Man↗

Summary of Assessments Performed in FY 21 by SNL QA POC for FY 20 SNL NFCSC Milestone Deliverables

The Sandia National Laboratories (SNL) staff is meeting the requirements of the Nuclear Fuel Cycle and Supply Chain (NFCSC) Quality Assurance Program Document (QAPD). Each of the 5 NFCSC FY 20 packages for SNL were reviewed. None of the 5 packages had incorrect QRL categories. No major corrective actions are assigned. Additional and minor PICS:NE checkbox errors may exist, but none were identified in this assessment. Training is now also geared to encourage WPMs to take credit for optional technical reviews by considering setting the QRL level to 3. This is because when the level is set to 4, the PICS:NE system does not provide fields for review information. Finally, training in the NFCSC QAPD has been delivered as always to WPMs.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Real-time supervisory control implementation of SmAHTR power plant - 143

This paper discusses an implementation of a supervisory control system for a nuclear power plant model using Small modular Advanced High Temperature Reactors (SmAHTR). The simulation operates in real-time using a network of computer agents, implemented on Raspberry Pi's (RPi's), where each major task is performed by one or more RPi's running calculations in parallel. The system architecture contains local, module, master, and operator actions to automate all aspects of the plant. Local level controllers run individual control loops to ensure the desired reference signals are met. The module level controllers set the local level reference signals within each SMR unit and detect sensor and actuator failures to adjust those reference signals as needed. Master level controllers balance plant power by calculating required heat power from each reactor and electric power from each generator and sending that data to the module controllers. Finally, the operator level contains an operator interface to summarize data and faults gathered through the controller levels, with options to review plant and reactor details as desired. This control implementation allows the plant to run autonomously, load follow a desired electrical power curve, and detect a growing number of fault scenarios. Ultimately, this type of supervisory control system will reduce labor-intensive surveillance and testing and allow fewer operators to more safely monitor an entire plant. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Studies of tropical ocean dynamics using the TOPEX/Poseidon altimeter-derived sea surface topography

Our primary objective is to carry out studies of tropical ocean dynamics using the TOPEX/POSEIDON altimeter-derived sea level data set in conjunction with the large in situ sea level data set available at the Tropical Ocean Global Atmosphere (TOGA) Sea Level Center. These studies will be supported by an interaction with numerical model simulations of tropical ocean variability. Five specific objectives can be identified: (1) research products; (2) short-term climate variations; (3) tropical-current variations; (4) synoptic-scale variability; and (5) model simulations.

Lukas, Roger↗

Search for Higgs boson decays into a Z boson and a light hadronically decaying resonance in pp collisions at s =13 TeV with the ATLAS detector

A search for decays of the Higgs boson into a Z boson and a light resonance, with a mass of 0.5–3.5 GeV, is performed using the full 140 fb−1 dataset of 13 TeV proton–proton collisions recorded by the ATLAS detector during LHC Run 2. Leptonic decays of the Z boson and hadronic decays of the light resonance are considered. The resonance can be interpreted as a J / ψ or η c meson, an axion-like particle, or a light pseudoscalar predicted in two-Higgs-doublet models. Due to its low mass, this resonance is produced with a high Lorentz boost in the laboratory frame and therefore reconstructed as a single small-radius jet of hadrons. A neural network is used to correct the Monte Carlo simulation of the total expected background using data from sideband regions. Two additional neural networks are used to distinguish signal from background, enhancing the purity of the signal region. A binned profile-likelihood fit is performed on the final-state invariant mass distribution. No significant excess of events relative to the expected background is observed, and upper limits at 95% confidence level are set on the Higgs boson's branching fraction to a Z boson and a light resonance. The exclusion limit is ∼10% for the lower masses, and increases for higher masses. Upper limits on the effective coupling C Z H eff / Λ of an axion-like particle to a Higgs boson and Z boson are also set at 95% confidence level, and range from 0.9 to 2 TeV−1.

Aad, G↗

Using rewards and penalties to obtain desired subject performance

Operant conditioning procedures, specifically the use of negative reinforcement, in achieving stable learning behavior is described. The critical tracking test (CTT) a method of detecting human operator impairment was tested. A pass level is set for each subject, based on that subject's asymptotic skill level while sober. It is critical that complete training take place before the individualized pass level is set in order that the impairment can be detected. The results provide a more general basis for the application of reward/penalty structures in manual control research.

Cook, M.↗

SU-E-J-262: Segmentation in Therapy: Impact of Display

Purpose: To determine the calibration of monitors used for structure delineation in radiotherapy and to investigate the impact of window/level on the delineations. Method and Materials: hotometers were used to measure ambient light and luminance for 12 monitors used for delineating structures in radiotherapy. Luminance was determined using AAPM TG-18 patterns TG18-LN12-01 to TG18-LN12-18. The DICOM grayscale display function (GSDF) was calculated for each monitor. To investigate the impact of window and level eight observers each outlined two sets of structures (four structures per set) on CT simulation images. In the first set window and level were initialized at random values and the observers adjusted as needed. In the second set window and level were locked at preselected values for all observers. Results: Ambient light variability at different displays was 24% and was higher than radiology reading rooms. Monitor luminance curves were substantially different than the corresponding GSDF. Monitors demonstrated higher contrast than the GSDF in the lower third of driving levels and lower contrast in the upper third of driving levels. Increased contrast at low driving levels may be to compensate for high ambient light which would otherwise reduce contrast. Abrupt changes in luminance and loss of all contrast at both upper and lower driving levels was observed. Interobserver variability was 379HU for window and 217HU for level. Outline variability was lower when the window and level settings were similar and when they were preselected. Structures without sharp boundaries (e.g., partial volume and a wide window value) resulted in substantial interobserver variability even when window/level were preselected. Conclusion: Substantial variation in monitor calibration and ambient light exists in radiotherapy. Further, the substantially different window/level contributes to outline variability. Future work will quantify the contributions of monitor calibration and window/level on outline variability and accuracy.

60 APPLIED LIFE SCIENCES↗

A multilevel method for structural synthesis

A multilevel method for structural synthesis based on finite element modeling at both the system and the substructure level is set forth. At the system level, the design is described using basis vectors generated via substructure design modification. Whenever possible, substructure constraints are satisfied via local material redistribution. At both the system level and the substructure level, design modification is carried out by solving a sequence of approximate problems. The method generates upper bound approximations for the optimum design and it has potential for substantial gains in computational efficiency, because the uncoupled substructure design modification problems can be processed in parallel.

Schmit, L. A.↗

Intersections of Disadvantaged Communities and Renewable Energy Potential: Data Set and Analysis to Inform Equitable Investment Prioritization in the United States

Renewable energy development can bolster local economies through job creation, local tax revenues, and reduced energy costs; however, communities most in need of economic development and employment opportunities often see lower levels of renewable energy deployment. We sought to identify areas where disadvantaged community indicators and high generation potential from cost-effective renewable energy opportunities intersect and deployment could lead to economic development and job creation. This presentation will highlight several of our findings. This research and the associated county-level data set are intended to inform national- and state-level energy-related assistance programs, economic development efforts, and infrastructure programs seeking to prioritize investments in disadvantaged communities.

community energy planning↗

Development of a human live attenuated West Nile infectious DNA vaccine: Identification of a minimal mutation set conferring the attenuation level acceptable for a human vaccine

ABSTRACT: For the development of a human West Nile (WN) infectious DNA (iDNA) vaccine, we created highly attenuated chimeric virus W1806 with the serological identity of highly virulent WN-NY99. Earlier, we attempted to utilize mutations found in the E protein of the SA14-14-2 vaccine to bring safety of W1806 to the level acceptable for human use (). Here, we analyzed effects of the SA14-14-2 changes on growth properties and neurovirulence of W1806. A set including the E138K, K279M, K439R and G447D changes was identified as the perspective subset for satisfying the target safety profile without compromising immunogenicity of the vaccine candidate. The genetic stability of the attenuated phenotype was found to be unsatisfactory being dependent on a subset of attenuating changes incorporated in W1806. Elucidation of underlying mechanisms influencing selection of pathways for restoration of the envelope protein functionality will facilitate resolution of the emerged genetic stability issue. - Highlights: •Effect of mutations in E on properties of WN1806 is determined. •A subset of attenuating mutations suitable for a human vaccine is defined. •Mechanism of attenuation is proposed and illustrated. •Underlying mechanisms of neurovirulence reversion are suggested.

60 APPLIED LIFE SCIENCES↗

Instruction manual for UTEP weld gas hydrogen detector

The instrument described in this manual was developed at the University of Texas at El Paso under contract from the National Aeronautics and Space Administration Marshall Space Flight Center. The instrument has been used to detect hydrogen in the shielding gas of Variable Polarity Plasma Arc (VPPA) welds at concentrations of less than 100 ppm. The instrument makes measurements in real time during the welding operation and provides the operator with an easily readable graphic display of the present level of hydrogen in the arc as well as the level of hydrogen over the past approximately five minutes. In this way the welder can not only tell if the present level of hydrogen is excessive, but can see what changes in weld parameters have done to the level of hydrogen. The welder can set the level of hydrogen that is considered critical and the instrument display will indicate when that level has been exceeded. All detection is from the torch side. All needed equipment is supplied by the developer except for an IBM PC compatible computer which must be supplied by the user. Source code is supplied in this manual so that the user can modify the control program as desired.

Mcclure, John↗

Feed-Back Moisture Sensor Control for the Delivery of Water to Plants Cultivated in Space

The development of a spaceflight-rated Porous Tube Insert Module (PTIM) nutrient delivery tray has facilitated a series of studies evaluating various aspects of water and nutrient delivery to plants as they would be cultivated in space. We report here on our first experiment using the PTIM with a software-driven feedback moisture sensor control strategy for maintaining root zone wetness level set-points. One-day-old wheat seedlings (Tritium aestivum cv Apogee; N=15) were inserted into each of three Substrate Compartments (SCs) pre-packed with 0.25-1 . mm Profile(TradeMark) substrate and maintained at root zone relative water content levels of 70, 80 and 90%. The SCs contained a bottom-situated porous tube around which a capillary mat was wrapped. Three Porous Tubes. were planted using similar protocols (but without the substrate) and also maintained at these three moisture level set-points. Half-strength modified Hoagland's nutrient solution was used to supply water and nutrients. Results on hardware performance, water usage rates and wheat developmental differences between the different experimental treatments are presented.

Levine, Howard G.↗

Search for W ′ → t b → q q b b decays in p p collisions at s = 8 TeV with the ATLAS detector

A search for a massive WPRIME gauge boson is performed with the ATLAS detector at the LHC in P P collisions at a centre-of-mass energy of sqrt(s) = 8 TeV, corresponding to 20.3 fb-1 of integrated luminosity. This analysis is done in the WPRIME --> TOP BOTTOM --> QUARK QUARK BOTTOM BOTTOM mode for WPRIME masses above 1.5 TeV, where the WPRIME decay products are highly boosted. Novel jet substructure techniques are used to identify jets from high-momentum top quarks to ensure high sensitivity, independent of WPRIME mass, up to 3 TeV; b-tagging is also used to identify jets originating from b-quarks. The data are consistent with Standard Model background-only expectations, and upper limits at 95% confidence level are set on the WPRIME --> TOP BOTTOM cross section times branching ratio ranging from 0.16 pb to 0.33 pb for left-handed WPRIME bosons, and ranging from 0.10 pb to 0.21 pb for WPRIME bosons with purely right-handed couplings. Upper limits at 95% confidence level are set on the WPRIME-boson coupling to TOP BOTTOM as a function of the WPRIME mass using an effective field theory approach, which is independent of details of particular models predicting a WPRIME boson.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for $W' \rightarrow tb \rightarrow qqbb$ decays in $pp$ p p collisions at $\sqrt{s}$ TeV with the ATLAS detector

A search for a massive W' gauge boson decaying to a top quark and a bottom quark is performed with the ATLAS detector in pp collisions at the LHC. The dataset was taken at a centre-of-mass energy of √s=8 TeV and corresponds to 20.3 fb –1 of integrated luminosity. This analysis is done in the hadronic decay mode of the top quark, where novel jet substructure techniques are used to identify jets from high-momentum top quarks. This allows for a search for high-mass W' bosons in the range 1.5–3.0 TeV. b-tagging is used to identify jets originating from b-quarks. The data are consistent with Standard Model background-only expectations, and upper limits at 95% confidence level are set on the W' → tb cross section times branching ratio ranging from 0.16 pb to 0.33 pb for left-handed W' bosons, and ranging from 0.10 pb to 0.21 pb for W' bosons with purely right-handed couplings. As a result, upper limits at 95% confidence level are set on the W'-boson coupling to tb as a function of the W' mass using an effective field theory approach, which is independent of details of particular models predicting a W' boson.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Method for implementation of recursive hierarchical segmentation on parallel computers

A method, computer readable storage, and apparatus for implementing a recursive hierarchical segmentation algorithm on a parallel computing platform. The method includes setting a bottom level of recursion that defines where a recursive division of an image into sections stops dividing, and setting an intermediate level of recursion where the recursive division changes from a parallel implementation into a serial implementation. The segmentation algorithm is implemented according to the set levels. The method can also include setting a convergence check level of recursion with which the first level of recursion communicates with when performing a convergence check.

Tilton, James C.↗

The Solar Influencer Next Door: Predicting Low-Income Solar Referrals and Leads

Increasing the adoption of solar among low-to-moderate income (LMI) households remains an important policy goal because of its promise to simultaneously reduce energy burden and support the just distribution of benefits of renewable energy. However, scaling LMI solar remains challenging due to affordability and access issues. Most existing LMI adoption has occurred under public-funded programs, highlighting the importance of increasing the cost-effectiveness of these programs at scale. We develop a new household-level data set on LMI solar lead acquisition, referrals, and adoption to understand the processes through which LMI solar uptake has occurred in California. Then, we develop models to predict two sub-mechanisms in the solar adoption process: whether an otherwise qualified lead becomes "lost" i.e. non-responsive to outreach and, for existing clients, whether they refer solar to others. For the program analyzed, participants received their solar system at no cost, which deemphasizes economic drivers of solar adoption and could differ from other program experiences. Both models substantially improved the accuracy of prediction relative to a baseline. Overall, we find that peer effects and solar economics are important to predicting referrals, and household demographic factors in lead loss prediction. Finally, we find that referrals are both the highest quality and largest source of LMI solar leads, providing a promising mechanism to expand LMI programs further.

customer acquisition costs↗