Search NASA⌕ Search

SEARCH · Search NASA

Results for “metallic hydrogen”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Long term durability test and post mortem for metal-supported solid oxide electrolysis cells

Hydrogen is a renewable energy carrier, and electrolysis to split water is the most environmentally friendly method to produce hydrogen. This work reports long-term durability and degradation mode analysis for metal-supported solid oxide electrolysis cells (MS-SOECs). Catalyst screening showed that MS-SOECs with composite electrode catalysts (samarium-doped ceria-nickel [SDC-Ni] serving as a fuel electrode catalyst, and praseodymium oxide [PrO x ]-SDC or La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 [LSCF]-SDC serving as an air electrode catalyst) exhibit the highest electrochemical performance at 700 °C. The degradation rate of cells with LSCF-SDC as the air electrode catalyst was as low as 1.3%/100 h in long term durability tests at a current density of 0.33 A cm -2 , in contrast to rapid degradation observed for a cell with a PrO x -SDC air electrode. Furthermore, post-mortem analysis reveals the degradation is dependent on the primary modes of fuel electrode catalyst coarsening and Cr poisoning on the air electrode catalyst, as well as secondary modes of oxidation of the metal support and local elemental accumulation of Ni. Other degradation modes reported in conventional anode-supported SOECs, such as Ni migration, foreign element contamination, delamination of the cell, and nano-voids on the electrolyte, are not observed in the present MS-SOECs.

25 ENERGY STORAGE↗
DOE OSTI2021

A refined design concept for sulfur-tolerant Pd catalyst supported on zeolite by shape-selective exclusion and hydrogen spillover for hydrogenation of aromatics

Sulfur poisoning of noble metal catalysts has been a major challenge for decades. This work demonstrates the superior sulfur tolerance of a hybrid zeolite-supported Pd catalyst for hydrogenation of tetralin containing benzothiophene. The hybrid catalyst consists of Pd supported on a large-pore acidic zeolite Y (Pd/HY) and a small-pore zeolite A without (Pd/HA) or with surface metal passivation by chemical vapor deposition of SiO 2 (SiO 2 -Pd/HA) and with potassium ion exchange (SiO 2 -Pd/KA). Pd/HY is very active for tetralin hydrogenation but quickly deactivates after exposure to benzothiophene at high concentration of 100 ppm sulfur. The SiO 2 -coated Pd/HA shows no activity for tetralin hydrogenation, but continues to activate H 2 and serve as a source of hydrogen spillover from Pd/HA since these metal sites are protected from thiophenic sulfur due to size-selective exclusion. Adding K ion-exchanged and SiO 2 -coated catalyst SiO 2 -Pd/KA to Pd/HY is even more effective for enhancing sulfur tolerance, both for tetralin hydrogenation and for isomerization of cis-decalin to trans-decalin in the presence of benzothiophene. The turnover frequencies (TOF) of all the catalysts are similar at the exposed sulfur/Pd atomic ratio of around 0.5. With further increase in sulfur/Pd ratio, rapid decline in TOF was observed on Pd/HY, but SiO 2 -Pd/KA + Pd/HY hybrid catalyst shows a significantly higher TOF than that over Pd/HY, even though SiO 2 -Pd/KA or SiO 2 -Pd/HA alone shows no TOF for tetralin hydrogenation. Even after high-dose poisoning at 400 ppm sulfur, the SiO 2 -Pd/KA + Pd/HY hybrid recovered activity more quickly than SiO 2 -Pd/HA + Pd/HY, while the latter in turn is much better than Pd/HY alone. These results point to the higher activity for hydrogen spillover from SiO 2 -Pd/KA where Pd metal sites are protected from not only thiophenic sulfur but also inorganic sulfur H 2 S by shape-selective exclusion. The present work further establishes the validity of shape-selective exclusion and hydrogen spillover in the design concept proposed for a sulfur-tolerant bimodal acidic zeolite-supported metal catalyst for hydrogenation of naphthalene [C.S. Song, Chemtech, 29 (1999) 26–30], and refines the design concept further for limiting the size of small pore in hybrid catalysts to~3 Å for restricting access of H 2 S but allowing entrance of H 2 . Further, this refined design concept is applicable to other supported monometallic and bimetallic catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

CO 2 Adsorption and Hydrogenation on Inverse InO x /Cu(111) Catalysts: Active Role of the Oxide–Metal Interface

The direct conversion of carbon dioxide (CO 2 ) into methanol via hydrogenation is essential for industrial applications. Recent studies on catalysts that contain an inverse oxide/metal configuration have shown very good catalytic performance for the CO 2 hydrogenation to methanol process. Here, in this study, we investigated the behavior of indium oxide-Cu(111) interfaces under pure CO 2 and CO 2 /H 2 mixtures using synchrotron-based ambient-pressure X-ray photoelectron spectroscopy (AP-XPS). Initially, a single layer of copper oxide (Cu x O) was grown on the Cu(111) surface by controlled oxidation. On this surface, indium was deposited at room temperature. Oxygen atoms transferred from Cu x O/Cu(111) to the indium metal upon deposition, forming In-O-Cu bonds and active interfaces. Although Cu(111) is not very active for the binding and activation of CO 2 , the formed InO x -Cu(111) interfaces had no problem adsorbing and dissociating the molecule at room temperature. Reaction of CO 2 with H 2 on InO x -Cu(111) yielded surface-bound H 3 CO, CO 2 δ− , CO 3 , and CH x species that are typical intermediates in the production of methanol and other oxygenates. The InO x -Cu(111) interface underwent dynamic chemical changes under reaction conditions, forming In-Cu alloys at low indium coverages (< 0.05 monolayer), while at higher indium coverages a mixture of an In-Cu and InO x was detected in XPS. These findings indicate that InO x /In-Cu interfaces can play a key role in processes aimed at the trapping and valorization of CO 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2026

Elucidating interfacial active sites in ruthenium–boron nitride nanotube catalysts for efficient low-temperature ammonia-to-hydrogen conversion

Tailoring the interaction between metal nanoparticles and catalyst support presents a prominent strategy to enhance both the activity and durability in hydrogen (H 2 ) production catalysts. In this work, ruthenium nanoparticles (NPs) supported on boron nitride nanotubes (Ru/BNNT) are introduced as efficient and thermally robust catalysts for low-temperature ammonia (NH 3 ) decomposition. The unique curvature and ionic nature of BNNTs enable uniform Ru dispersion and metal-support interactions (MSIs), resulting in exceptional H 2 generation efficiency and long-term operational stability. In-situ transmission electron microscopy (TEM) reveals remarkable thermal resistance of Ru/BNNT with minimal nanoparticle sintering, while density functional theory (DFT) calculations uncover a dual-site mechanism in which interfacial Ru atoms promote NH 3 dissociation and adjacent Ru sites facilitate 2H* recombination and H 2 desorption. This cooperative interaction between metal NPs and the BNNT support underpins the outstanding catalytic performance and durability observed. In conclusion, the findings highlight the strategic potential of BNNTs as versatile supports for high-performance and stable catalysts in sustainable H 2 energy conversion and related catalytic processes.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Toward Hydrogen Isotope Separations through Strong Hydrogen Adsorption at Open Copper(I) Sites in an Ultramicroporous Metal-Organic Framework

Metal-organic frameworks with coordinatively unsaturated metal sites (open metal sites) capable of engaging in orbital interactions with pi-acidic gases are of interest for enabling ambient-temperature gas separations, such as hydrogen isotope separations. In view of the weakly pi-acidic nature of H2, we sought to strengthen pi-backbonding-mediated H2 adsorption through pore confinement effects. Toward that end, we synthesized and characterized the ultramicroporous metal-organic framework CuxZn5-xCl4-yHz(bbta)3 (CuIZn-MFU-4; H2bbta = 1H,5H-benzo(1,2-d:4,5-d')bistriazole), featuring pi-basic trigonal pyramidal CuI sites that reside within 7 A of one another at their closest. Gas adsorption measurements reveal an H2 adsorption enthalpy of -38 kJ/mol, exceeding that of the larger-pore analog (CuIZn-MFU-4l; -33 kJ/mol) and representing the strongest H2 adsorption yet achieved in a metal-organic framework. The stronger H2 adsorption in CuIZn-MFU-4 is attributed to a combination of pore confinement effects and the increased ..sigma..-accepting nature of the CuI sites caused by a more electron-withdrawing bbta2- linker, as supported by structural, spectroscopic, and computational evidence. With the strongest H2 adsorption, equilibrium isotope effects in CuIZn-MFU-4 lead to a D2/H2 selectivity (as estimated by ideal adsorbed solution theory) of 1.35 even at 298 K, approaching the values reported below 200 K for conventional porous materials.

08 HYDROGEN↗
DOE OSTI2020

Application of Single-Site Catalysts in the Hydrogen Economy

Catalysts development is an evolutionary process. The generation of new single-metal-site catalysts, with isolated metal atoms dispersed on the surface of substrates, offers maximum atom-utilization efficiency, high specific activity, and novel properties. The unique structure of single-site catalysts also enables their potential to bridge the gap between homogeneous and heterogeneous catalysis. This field is at an early stage, characterized by important discoveries and novel demonstrations of catalytic properties associated with the fine structure of single metal sites; however, specific applications, especially catalytic hydrogenation reactions, are still lacking. Here, we focus on applications of single-site catalysts in the hydrogen economy based on our studies of hydrogen generation/storage via single-metal-site catalysts. We hope this work will inspire the development of single-site catalysts for other applications.

08 HYDROGEN↗
DOE OSTI2021

Development of High Capacity Energy Storage Materials

Hydrogen fuel cells have the potential to offer energy and power density advantages over lithium ion batteries in automotive and portable power applications when paired with an appropriate hydrogen storage system. Development of the ideal hydrogen storage material has been immensely sought after but plagued by limitations present in each type of material. These limitations typically include nonidealistic operational temperatures, low capacities, excessive costs, lack of reversibility, or evolution of impurities which irreversibly damage fuel cell performance. Many complex metal hydrides possess suitable hydrogen capacities but unfortunately suffer from impurity release. In order to address this problem, our team has explored in-situ catalyst doping of alkali metal amides to demonstrate methodologies to reduce ammonia release. The incorporation of iridium metal in lithium amide significantly reduces the ammonia release and decomposes the ammonia to provide additional hydrogen. Furthermore, we demonstrate, for the first time, high resistance of low temperature fuel cells to ammonia in comparison with typical proton exchange membrane fuel cells. The utilization of these two approaches in tandem provides a novel pathway for the development and implementation of high capacity energy storage materials for fuel cell applications.

25 ENERGY STORAGE↗
DOE OSTI2023

Dislocation line tension model to improve understanding of the effects of hydrogen on the deformation of structural materials

Decarbonization efforts highlight hydrogen as an attractive alternative to fossil fuels, but its tendency to embrittle structural metals demands careful consideration when designing hydrogen infrastructure. Moreover, the mechanisms by which hydrogen degrades these materials are still being elucidated. The current work develops new computational tools to quantify the different contributions of hydrogen to the energy barrier of cross-slip, a key deformation mechanism. Novel features are implemented to a line tension model, which include the use of non-singular dislocation interactions, character-dependent dislocation energies and simulations of the constriction configurations. A new molecular dynamics technique is developed to calculate the interaction energy between the partials of a dissociated dislocation via fixing the centers of mass of the regions below and above the Shockley partials and performing time-averaged calculations. Hydrogen is found to impact the stacking fault width of dislocations in different ways depending on their characters: it decreases for dislocations with a character θ > 30°, remains unchanged for θ = 30° and increases for θ < 30°. The latter regime is a newly identified mechanism by which hydrogen inhibits cross-slip. Moreover, formation of nano-hydrides is predicted to occur around screw dislocations for high hydrogen concentrations, a phenomenon previously identified only in dislocations with an edge component. If nano-hydrides develop, their influence extending the equilibrium stacking fault width and increasing both the constriction and cross-slip energy barriers dominate over all other hydrogen contributions. The theory and tools developed will pave the way towards a comprehensive understanding of hydrogen-dislocation interactions in structural metals.

08 HYDROGEN↗
DOE OSTI2021

Mechanistic Similarities and Differences for Hydrogenation of Aromatic Heterocycles and Aliphatic Carbonyls on Sulfided Ru Nanoparticles

This study establishes the contrasting reactivity trends for the hydrogenation of aromatic hydrocarbons (AHCs = C n H m X, X = N, S, O, and C) and aliphatic carbonyls [R a C(O)R b ; R a = alkyl group, R b = CH 3 or H] on sulfided Ru clusters arising from the difference in the elementary proton and hydride attack catalytic sequence. Both reactions require sequential additions of a proton from either Ru n+ –(SH 2 ) or S 2 –(H δ+ ) species and a hydride from Ru n+ –(H δ– ) species to the unsaturated C=X bonds. For the five-membered-ring aromatic heterocycles (AHCs = pyrrole, thiophene, and furan), an initial proton addition limits the catalytic turnovers; thus, their hydrogenation reactivity increases with increasing gas-phase proton affinities of the AHCs. Pyridine as the more basic six-membered N-AHC is more susceptible to protonation; therefore, it is more reactive, and its initial proton addition is quasi-equilibrated, followed by the kinetically relevant hydride addition. Conversely, aliphatic carbonyls prefer to undergo hydrogen additions in a reverse sequence, where a Ru n+ –(H δ– ) hydride initially attacks the electron-deficient carbonyl C atom as the kinetically relevant step before a subsequent rapid S 2 –(H δ+ ) proton addition on the electron-rich O atom, as confirmed by isotopic exchange studies with butanal-D 2 and 1-butanol-D 2 mixtures and density functional theory calculations on S-deficient RuS 2 (100) surfaces. For these reasons, their hydrogenation reactivity increases with increasing gas-phase hydride affinities of the carbonyls. On metallic Ru surfaces without sulfur, hydrogen adatoms (H*) are the only reactive hydrogen species; the reactivity of their attack on aromatic heterocycles increases with increasing reactant proton affinities much more sensitively than that on sulfided Ru surfaces. This work illustrates the distinct catalytic roles of the diverse hydrogen species in hydrogenation—the interplay between proton and hydride additions has marked catalytic consequences in shaping the free energy landscape of the reactions, which in turn leads to the observed kinetic dependences, kinetic parameters, reactivity trends, and scaling relations between the measured barriers and the appropriate kinetic descriptors, that is, proton affinity of AHCs and hydride affinity of carbonyls in hydrogenation catalysis. Here, these mechanistic similarities and differences provide explanations of the observed reactivity trends and thus have profound implications for industrial hydrogenation and hydrotreating catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

High temperature thermochemical energy storage materials

Disclosed are high enthalpy thermochemical energy storage materials that exhibit high thermal conductivity and stability at high temperature reaction conditions. Disclosed materials include hydride-based alloys that can undergo high temperature reversible hydrogenation/dehydrogenation reactions without phase change of any metal or metalloid components of the alloy. The materials undergo a reversible exothermic hydrogenation reaction to form a metal hydride and a ternary alloy that includes a high thermal conductivity metal that, in its pure state, would exhibit a phase change at the hydrogenation reaction conditions.

Ward, Patrick A.↗
DOE OSTI2020

Enhancing perovskite electrocatalysis through synergistic functionalization of B-site cation for efficient water splitting

The family of perovskite oxides is a promising class of catalysts for diverse energy conversion processes including water splitting. In this work, a facile two-step manipulation (in-situ exsolution and post-sulfurization) strategy was proposed and applied to LaCo 0.2 Fe 0.8 O 3 (LCF) perovskite parent, through which, the electronic state, spatial immersion and intrinsic activity of B-site cobalt (Co) were stepwise tuned at nanoscale proximity accordingly (i.e., lattice Co ions segregated Co 0 → embedded CoS 2 ). Impressively, the as-prepared catalyst (S-LCF) obtains an emergent oxygen deficient microstructure seamlessly pinned with uniformly distributed CoS 2 nanoparticles (NPs), which demonstrates enhanced performance toward both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), and shows good stability in overall water splitting. The density functional theory (DFT) calculations illustrate the optimized metal-oxygen covalency and hydrogen adsorption Gibbs free energy (Δ G H *) on S-LCF, which further buttresses the prominence of our B-site cation engineering tactics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Tuning Ligand–Coordinated Single Metal Atoms on TiO 2 and their Dynamic Response during Hydrogenation Catalysis

Ligand-coordinated supported catalysts (LCSCs) are of growing interest for heterogeneous single-atom catalysis. Here, the effect of the choice of organic ligand on the activity and stability of TiO 2 -supported single-atom Pt-ligand catalysts was investigated for ethylene hydrogenation. The activity of these catalysts showed a significant dependence on the choice of ligand and also correlated with coordination number for Pt-ligand and Pt-Cl - . Of the three ligands examined in this study, the one with the lowest Pt coordination number, 1,10-phenanthroline-5,6-dione (PDO), showed the lowest reaction temperature and highest reaction rate, likely due to those metal sites being more accessible to reactant adsorption. In-situ X-ray absorption spectroscopy (XAS) experiments showed that the activity also correlated with good heterolytic dissociation of hydrogen, which was supported by OH/OD exchange experiments and was the rate-determining step of the hydrogenation reaction. In these in-situ XAS experiments up to 190 degrees C, the supported Pt-ligand catalyst showed excellent stability against structural and chemical change. Instead of Pt, the PDO ligand could be coordinated with Ir on TiO 2 to form Ir LCSCs that showed slow activation by loss of Ir-Cl bonds, then excellent stability in the hydrogenation of ethylene. Furthermore, these results provide the chance to engineer ligand-coordinated supported catalysts at the single-atom catalyst level by the choice of ligand and enable new applications at relatively high temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Bonding and Acidity of the Formal Hydride in the Prototypical Au 9 (PPh 3 ) 8 H 2+ Nanocluster

Abstract The role of hydrogen atoms as surface ligands on metal nanoclusters is of profound importance but remains difficult to directly study. While hydrogen atoms often appear to be incorporated formally as hydrides, evidence suggests that they donate electrons to the cluster's delocalized superatomic orbitals and may consequently behave as acidic protons that play key roles in synthetic or catalytic mechanisms. Here we directly test this assertion for the prototypical Au 9 (PPh 3 ) 8 H 2+ nanocluster, formed by addition of a hydride to the well‐characterized Au 9 (PPh 3 ) 8 3+ . Using gas‐phase infrared spectroscopy, we were able to unambiguously isolate Au 9 (PPh 3 ) 8 H 2+ and Au 9 (PPh 3 ) 8 D 2+ , revealing an Au−H stretching mode at 1528 cm −1 that shifts to 1038 cm −1 upon deuteration. This shift is greater than the maximum expected for a typical harmonic potential, suggesting a potential governing cluster‐H bonding that has some square‐well character consistent with the hydrogen nucleus behaving as a metal atom in the cluster core. Complexing this cluster with very weak bases reveals a redshift of 37 cm −1 in the Au−H vibration, consistent with those typically seen for moderately acidic groups in gas phase molecules and providing an estimate of the acidity of Au 9 (PPh 3 ) 8 H 2+ , at least with regard to its surface reactivity.

Hernández, Hanna Morales↗
DOE OSTI2023

Bonding and Acidity of the Formal Hydride in the Prototypical Au 9 (PPh 3 ) 8 H 2+ Nanocluster

The role of hydrogen atoms as surface ligands on metal nanoclusters is of profound importance but remains difficult to directly study. While hydrogen atoms often appear to be incorporated formally as hydrides, evidence suggests that they donate electrons to the cluster's delocalized superatomic orbitals and may consequently behave as acidic protons that play key roles in synthetic or catalytic mechanisms. Here we directly test this assertion for the prototypical Au 9 (PPh 3 ) 8 H 2+ nanocluster, formed by addition of a hydride to the well-characterized Au 9 (PPh 3 ) 8 3+ . Using gas-phase infrared spectroscopy, we were able to unambiguously isolate Au 9 (PPh 3 ) 8 H 2+ and Au 9 (PPh 3 ) 8 D 2+ , revealing an Au–H stretching mode at 1528 cm –1 that shifts to 1038 cm –1 upon deuteration. This shift is greater than the maximum expected for a typical harmonic potential, suggesting a potential governing cluster-H bonding that has some square-well character consistent with the hydrogen nucleus behaving as a metal atom in the cluster core. Complexing this cluster with very weak bases reveals a redshift of 37 cm –1 in the Au–H vibration, consistent with those typically seen for moderately acidic groups in gas phase molecules and providing an estimate of the acidity of Au 9 (PPh 3 ) 8 H 2+ , at least with regard to its surface reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Corrosion and Enhanced Hydrogen Evolution in Electrochemical Reduction of Ammonium Carbamate on Transition Metal Surfaces

Experiments and theory are combined to search for catalyst activity and stability descriptors for the direct reactive capture and conversion (RCC) of CO 2 in ammonia capture solutions using Cu, Ag, Au, Sn, and Ti electrodes. Two major phenomena emerge in RCC that are not predominant in the electrochemical CO 2 reduction (CO 2 R) reaction, namely, the rapid corrosion and restructuring of the catalyst in the presence of the CO 2 -ammonia adducts and the promotion of the competing hydrogen evolution reaction (HER). The prevalence of HER in RCC is correlated to the electrostatic attraction of the protonated amine to the electrode and the repulsion of the captured CO 2 , using the potential of zero charge (PZC). The stability of catalysts under RCC conditions is a function of the applied potential and cannot be readily predicted using binding energy descriptors commonly used in the prediction of CO 2 R activity. Finally, a direct correlation between calculated binding energies of CO 2 R intermediates, atomic oxygen, hydrogen, and ammonia and the activity and stability of transition metals for RCC cannot be found, highlighting the need for descriptors beyond those known for CO 2 R.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Efficient Screening of Bi–Metallic Electrocatalysts for Glycerol Valorization

Glycerol is a byproduct of biodiesel production and, as such, it is of limited economic value. By means of electrooxidation, glycerol can be used as a feedstock for scalable hydrogen production, in addition to conversion to value-added products. The development of novel and efficient catalytic electrode materials for the anodic side of the reaction is a key towards a hydrogen-based energy economy. In the present study, a computational screening protocol combining DFT, scaling relations, and microkinetic modeling allows for a rational selection of novel catalysts that can deliver efficient glycerol electrooxidation, low cost of production, and environmental sustainability. Activity and chemical selectivity towards hydrogen production on pure metal catalysts is discussed in terms of volcano-shaped plots. We find that the selectivity in the glycerol oxidation reaction is influenced by a different energy landscape when in the presence of water and best classified by a comparison of O—H and C—H bond-breaking barriers. In addition, we screened 3570 bi-metallic catalysts in the AB (L1 0 ) and A 3 B (L1 2 ) ordered structures for activity, stability, price, and toxicity. By filtering based on the criteria for toxicity, resistance to oxidation, miscibility, and price, we have identified 5 L1 0 structured catalysts (AgPd, AuPd, PtSb, CuPt, and AgPt) and 20 L1 2 catalysts (Ga 3 Ta, In 3 Ta, Ir 3 W, Ir 3 Mo, Cu 3 Pt, Ir 3 Ta, Ir 3 Re, Pd 3 Bi, Pd 3 Cu, Pd 3 W, Pd 3 Co, Pd 3 Sn, Pd 3 Mo, Pd 3 Ag, Pd 3 Ga, Pd 3 Ta, Au 3 Ru, Pd 3 In, Au 3 Ir, and Pd 3 Au) that are all predicted to show high activity. We also identify an additional 37 L1 0 and 92 L1 2 structured electrocatalysts with an anticipated medium-high activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Removal of Bond Sodium from Full-Length Unirradiated Fermi-1 Blanket Elements and Assembly via Melt-Drain-Evaporate Process

Equipment was designed, fabricated, tested, and operated in an inert atmosphere radiological glovebox at Idaho National Laboratory to demonstrate the removal of bond sodium from full-length unirradiated Fermi-1 radial blanket elements and an entire radial blanket assembly using a Melt-Drain-Evaporate process. A series of three runs was performed with individual and multiple radial Fermi-1 blanket elements, and a fourth run was conducted with an entire Fermi-1 radial blanket assembly. After each run, the depleted uranium alloy slugs in every element slid out of its cladding, mechanically exhibiting the effectual absence of bond sodium. Quantitative and further qualitative analyses of the treated Fermi-1 material revealed the substantive, if not complete, absence of sodium metal in blanket element components. Indeed, entire columns of depleted uranium alloy slugs and associated cladding from select treated elements were separately contacted with water to react with residual sodium metal on the element surfaces, forming hydrogen gas. Samples of the resultant gas were analyzed to quantify the hydrogen concentration, which correlated to a residual sodium metal content for the treated element. Accordingly, no detectable sodium metal (<7 µg) was found on the surfaces of multiple depleted uranium alloy slugs after removal from its cladding. Detectable sodium metal, ranging from 14 to 30 µg, was found on the surfaces of one separated column of slugs and two separated full-length cladding segments. Each element originally contained ~25 g of bond sodium, resulting in quantitative sodium metal removal efficiencies of =99.9998%. The remaining separated uranium alloy slugs and cladding segments from the four runs were piece-wise immersed in alcohol while videorecording possible gas bubble formation as an additional qualitative analysis for residual sodium metal on treated surfaces, which identified the predominant absence of sodium reactivity on the balance of treated Fermi-1 blanket material. The results of this demonstration substantiate a path forward for treatment and disposal of 34 metric tons heavy metal of irradiated sodium-bonded Fermi-1 blanket material currently stored at Idaho National Laboratory.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

The Critical Role of Reductive Steps in the Nickel-Catalyzed Hydrogenolysis and Hydrolysis of Aryl Ether C-O Bonds

Hydrogenolysis of the aromatic C-O bond in aryl ethers is catalyzed by Ni in decalin or water at 150 °C. Observations of a significant kinetic isotope effect (kH/kD = 5.7) for the reactions of diphenyl ether under H2 and D2 and a positive dependence of the rate on H2 chemical potential in decalin indicate that addition of H to the aromatic ring is the rate-limiting step rather than C-O scission. Hydrogen addition occurs on the metal before C-O bond scission. DFT calculations indicate that hydrogen atom addition to the ortho position followed by C-O scission is energetically more feasible than C-O scission followed by H addition to either phenoxyl or phenyl moieties. Hydrogenolysis initiated via H addition in water is more selective (~75 %) compared to reactions in decalin (~30 %). The high selectivity for hydrogenolysis is attributed to stabilization of polar transition state by water as a polar solvent.

Wang, Meng↗