Search NASA⌕ Search

SEARCH · Search NASA

Results for “misalignment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Simulation studies for beam commissioning at FRIB Advanced Rare Isotope Separator

The Facility for Rare Isotope Beams (FRIB) includes a powerful superconducting driver accelerator and an Advanced Rare Isotope Separator (ARIS). The ARIS collects and purifies the rare isotope fragments of interest for experiments in nuclear physics, nuclear astrophysics, fundamental symmetries, etc. ARIS consists of a vertical pre-separator and downstream horizontal separator section (C-Bend). Each section can provide a high-resolution separation alternatively. The resolution reduction due to the emittance induced by momentum compression can be avoided by isotope separation in different dispersive planes. Beam commissioning of ARIS for the first experiments was completed and demonstrated particle identification of fragments. The beam tuning in ARIS largely relies on numerical simulations since the limited space for diagnostics. Here, we report the result of the beam trajectory correction, transverse matching, and beam-based misalignment studies at ARIS.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Investigating the effect of B T direction on W source-to-core pathways during the SAS-VW campaign on DIII-D

Experiments using the V-shaped closed slot tungsten (W) coated SAS-VW divertor in DIII-D studied the effects of the BT direction on core contamination of eroded tungsten from a closed slot divertor configuration. Core W content is inferred using soft-X ray tomography (SXR) and vacuum ultraviolet spectroscopy (SPRED), while W divertor erosion is inferred from visible spectroscopy of W emission (400.9 nm) measured by in-slot filterscopes (filtered photo-multipliers). Post-mortem analysis from the campaign discovered tile misalignment leading to suspected pronounced leading-edge erosion in the unfavorable BT direction (ion B ⃗×∇B ⃗ drift away from divertor) likely not captured by diagnostics. However, empirical findings show up to ~2-3x larger core contamination in the favorable BT direction even considering no additional W erosion from leading edges. A “source-to-core efficiency factor” is derived to estimate the effects of leading-edge erosion and compare W contamination for two pairs of H-mode discharges in opposite BT directions. While having differing absolute parameters, similar core impurity density gradients suggest comparable core impurity transport. These results show that favorable BT may have stronger source-to-core pathways for W impurities sourced from the outer divertor region. Possible explanations could include the effects of E ⃗×B ⃗ drifts on W transport in the scrape-off-layer (SOL) as well as previously determined fast SOL inner target directed flows in favorable BT.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Inferring the scrape-off layer heat flux width in a divertor with a low degree of axisymmetry

Plasma facing components (PFCs) in the next generation of tokamak devices will operate in challenging environments, with heat loads predicted to exceed 10 MWm -2 . The magnitude of these heat loads is set by the width of the channel, the ‘scrape-off layer’ (SOL), into which heat is exhausted, and can be characterised by an e-folding length scale for the decay of heat flux across the channel. It is expected this channel will narrow as tokamaks move towards reactor relevant conditions. Understanding the processes involved in setting the SOL heat flux width is imperative to be able to predict the heat loads PFCs must handle in future devices. Measurements of the SOL width are performed on the high-field spherical tokamak, ST40, using a newly commissioned infrared thermography system. With its high on-axis toroidal magnetic field (≥1.5 T) ST40 is uniquely positioned to investigate the influence of toroidal field on the heat flux width in spherical tokamaks, whilst also extending measurements of the SOL width in spherical tokamaks to increased poloidal field (≥0.3 T). Due to the divertor on ST40 having a low degree of axisymmetry, it is necessary for a set of radial measurements of the heat flux to be taken across the divertor, made possible using an automated toolchain that fully incorporates its 3D geometry. These radial profiles are combined with the magnetic geometry of the plasma to infer the width of the SOL, with both Eich and double exponential profiles of heat flux observed. A reduction in the heat flux is observed toroidally across part of the divertor, along with increased heat loads observed locally around the edges of the tiles. Future work in characterising the impact of tile misalignment and uncertainties in the reconstructed divertor magnetic geometry is required in order to further understand the observed heat flux patterns, as are additional investigations into the role potentially being played by an inhomogeneous sheath electric field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Confirming X-ray Parametric Down Conversion by Time-Energy Correlation

We present measurements of X-ray Parametric Down Conversion at the Advanced Photon Source synchrotron facility. Using an incoming pump beam at 22 keV, we observe the simultaneous, elastic emission of down-converted photon pairs generated in a diamond crystal. The pairs are detected using high count rate silicon drift detectors with low noise. Production by down-conversion is confirmed by measuring time-energy correlations in the detector signal, where photon pairs within an energy window ranging from 10 to 12 keV are only observed at short time differences. By systematically varying the crystal misalignment and detector positions, we obtain results that are consistent with the constant total of the down-converted signal. Our maximum rate of observed pairs was 130 /hour, corresponding to a conversion efficiency for the down-conversion process of 5.3±0.5×10 -13 .

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Masking of photovoltaic system performance problems by inverter clipping and other design and operational practices

We describe how performance problems can be “masked,” or not readily evident by several causes: by photovoltaic (PV) system configuration (such as the size of the PV array capacity relative to the size of the inverter and the resultant clipped operating mode); by instrumentation design, installation, and maintenance (such as a misaligned or dirty pyranometer); by contract clauses (when operational availability is transformed to contractual availability, which excludes many factors); and by identified management and operational practices (such as reporting on a portfolio of plants rather than individually). A simple method based on a duration curve is introduced to overcome shortcomings of Performance Ratio based on nameplate capacity and Performance Index based on hourly simulation when quantifying masking effects, and inverter clipping and pyranometer soiling are presented as two examples of the new method. With a better understanding of the non-transparency of masking issues, stakeholders can better interpret performance data and deliver improved AC and DC plant conditions through PV system operation and maintenance (O&M) for improved performance, reduced O&M costs, and a more consistently delivered, and reduced, levelized cost of energy (LCOE).

14 SOLAR ENERGY↗
DOE OSTI2020

Atomic Resolution Imaging of Light Elements in a Crystalline Environment using Dynamic Hollow-Cone Illumination Transmission Electron Microscopy

Multiple electron scattering and the nonintuitive nature of image formation with coherent radiation complicate the interpretation of conventional transmission electron microscopy images. Precession of the illuminating beam in transmission electron microscopy (TEM) can lead to more robust and interpretable images with some penalty to image contrast, a technique known as dynamic hollow-cone illumination TEM. Here, we demonstrate direct and robust imaging of light and heavy atoms in a crystalline environment with this technique. This method is similar to the annular bright-field technique in scanning transmission electron microscopy, via the principle of reciprocity. Dynamic hollow-cone illumination TEM is challenging in practice due to sensitivity to the misalignment of the precession axis, microscope objective aperture, and crystal zone axis.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Achieving High-Resolution Hard X-ray Microscopy using Monolithic 2D Multilayer Laue Lenses

This article introduces the 2D multilayer Laue lens (MLL) nanofocusing optics recently developed for high-resolution hard X-ray microscopy. The new optics utilized a micro-electro-mechanical-system (MEMS)-based template to accommodate two linear MLL optics in a pre-aligned configuration. Angular misalignment between the two lenses was controlled in tens of millidegrees, and the lateral position error was on a micrometer scale. Using the developed 2D MLLs, an astigmatism-free point focus of approximately 14 nm by 13 nm in horizontal and vertical directions, respectively, at 13.6 keV photon energy was obtained. In conclusion, the success of 2D MLL optics with an approaching 10 nm resolution is a significant step forward for the development of high-resolution hard X-ray microscopy and applications of MLL optics in the hard X-ray community.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Octahedral Distortion and Excitonic Behavior of Cs 3 Bi 2 Br 9 Halide Perovskite at Low Temperature

The metal halide ionic octahedron, represented as [MX 6 ] $n$- (M = metal cation, X = halide anion), serves as the basic structural unit in halide perovskites and plays a crucial role in determining their optoelectronic and chemical properties. Thus, it is possible to correlate the responses of metal halide perovskites to various environmental stimuli with the dynamic behaviors of the [MX 6 ] $n$- octahedra. In this study, with the temperature-dependent single-crystal X ray diffraction (SCXRD) measurements on Cs 3 Bi 2 Br 9 2D halide perovskites, we can identify two classes of distortions through the lowering of temperature: intraoctahedral distortion, which is the off-centering of Bi 3+ cation within a [BiBr 6 ] 3– octahedron due to the Bi 3+ 6s 2 lone pair electrons, and interoctahedral distortion, which is the collective misalignments among the [BiBr 6 ] 3– building blocks. Free exciton (FE) and self-trapped exciton (STE) models are used to study the relationship between the distortion of octahedra in Cs 3 Bi 2 Br 9 and the corresponding changes in its optoelectronic properties, which transform from dominating blue emission above 100 K to red emission at 4 K. In conclusion, this work provides new insights into the excitonic behaviors of perovskites and suggests a possibility that we can design and rationalize the optical properties of halide perovskites by regulating the environmental stimuli based on the knowledge of behaviors of the individual [MX 6 ] $n$- building blocks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Effect of Hydrophilicity and Interfacial Water Structure on Particle Attachment

Oriented attachment (OA) of nanoparticles is an important and common crystallization pathway. Efforts to isolate and quantify the interparticle forces that underlie OA have only recently been initiated and the role played by the interfacial solvent structure in the confined region between nanocrystal surfaces in enabling and controlling OA remains an open question. In this work, classical molecular dynamics (MD) simulations were performed to compute the free energy landscape of nanoparticles approaching mineral substrates in both vacuum and pure water. Periclase (MgO), muscovite (KAl 3 Si 3 O 10 (OH) 2 ), and pyrophyllite (Al 2 Si 4 O 10 (OH) 2 ) nanoparticles exposing the (100), (001), and (001) surfaces, respectively, were brought to contact with substrates exposing the same surfaces. These mineral surfaces were selected to investigate a range of hydrophilicities (periclase > muscovite > pyrophyllite). The MD simulations revealed that the interfacial water structure created free energy minima for nanoparticle approach that corresponded to integer numbers of intervening water layers. The depth of the free energy minima and the free energy barriers between minima correlated positively with the hydrophilicity of the mineral surface. While the range of solvent-mediated interactions was predicted to be short (a few intervening water layers at most for MgO), the free energy barriers were calculated to be large (fraction of an eV per nm 2 ) and the effect of misalignment diminished rapidly with the number of intervening water layers. The results help explain the formation of mesocrystals and the observed ability of nanoparticles to rotate before attachment while in a long-lived solvent-separated state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Dual-Wavelength Simultaneous Patterning of Degradable Thermoset Supports for One-Pot Embedded 3D Printing

Vat photopolymerization (VP) techniques have enabled the fabrication of complex geometries while balancing high precision and fast processing times. 3D printed objects are traditionally built layer-by-layer with newly cured layers being structurally supported by previous ones. Fabricating unsupported features such as overhangs and arches risks misalignment and sagging, limiting the range of accessible designs. To overcome this issue, support structures are fabricated along with the primary object as temporary scaffolds that provide stability and conserve print fidelity. For VP specifically, patterning dissolvable sacrificial supports is attractive to avoid manual removal after printing. In this study, we demonstrate a base-degradable thermoset to pattern print supports in a one-pot formulation along with the primary structural material. Efficient printing is enabled using a dual-wavelength negative imaging (DWNI) DLP printer that patterns the degradable thermoset with visible light and the permanent network with UV light, which are simultaneously projected using a single digital micromirror device (DMD). Printed objects undergo thermal postprocessing to enhance the final conversion of the primary material, after which thermoset supports are degraded in a basic, aqueous solution. This approach provides a robust method for the dual-wavelength patterning of sacrificial thermoset supports, broadening the range of accessible 3D printable materials and geometries.

3D printing↗
DOE OSTI2020

The Role of Dimer Formation in the Nucleation of Superlattice Transformations and Its Impact on Disorder

The formation of defect-free two-dimensional nanocrystal (NC) superstructures remains a challenge as persistent defects hinder charge delocalization and related device performance. Understanding defect formation is an important step toward developing strategies to mitigate their formation. However, specific mechanisms of defect formation are difficult to determine, as superlattice phase transformations that occur during fabrication are quite complex and there are a variety of factors influencing the disorder in the final structure. Here, we use Molecular Dynamics (MD) and electron microscopy in concert to investigate the nucleation of the epitaxial attachment of lead chalcogenide (PbX, where X = S, Se) NC assemblies. We use an updated implementation of an existing reactive force field in an MD framework to investigate how initial orientational (mis)alignment of the constituent building blocks impacts the final structure of the epitaxially connected superlattice. This Simple Molecular Reactive Force Field (SMRFF) captures both short-range covalent forces and long-range electrostatic forces and allows us to follow orientational and translational changes of NCs during superlattice transformation. Our simulations reveal how robust the oriented attachment is with regard to the initial configuration of the NCs, measuring its sensitivity to both in-plane and out-of-plane misorientation. We show that oriented attachment nucleates through the initial formation of dimers, which corroborate experimentally observed structures. We present high-resolution structural analysis of dimers at early stages of the superlattice transformation and rationalize their contribution to the formation of defects in the final superlattice. Collectively, the simulations and experiments presented in this paper provide insights into the nucleation of NC oriented attachment, the impact of the initial configuration of NCs on the structural fidelity of the final epitaxially connected superlattice, and the propensity to form commonly observed defects, such as missing bridges and atomic misalignment in the superlattice due to the formation of dimers. Here, we present potential strategies to mitigate the formation of superlattice defects.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Ion Transport in 2D Nanostructured $\pi$-Conjugated Thieno[3,2- b ]thiophene-Based Liquid Crystal

Leveraging the self-assembling behavior of liquid crystals designed for controlling ion transport is of both fundamental and technological significance. Here, we have designed and prepared a liquid crystal that contains (2,5-bis(5-(2,5,8,11-tetraoxatridecan-13-yl)thiophen-2yl)thieno[3,2-b]thiophene (BTTT) as mesogenic core and conjugated segment and symmetric tetra(ethylene oxide) (EO4) as polar side chains for ionic conducting regions. Driven by the crystallization of the BTTT cores, BTTT/dEO4 exhibits well-ordered smectic phases below 71.5 °C as confirmed by differential scanning calorimetry, polarized optical microscope, temperature dependent wide-angle X-ray scattering and grazing incidence wide-angle X-ray scattering (GIWAXS). We adopted a combination of experimental GIWAXS and molecular dynamics (MD) simulations to better understand the molecular packing of BTTT/dEO4 films, particularly when loaded with the ion conducting salt, lithium bis(trifluoromethanesulfonyl)imide (LiTFSI). Ionic conduction of BTTT/dEO4 is realized by the addition of LiTFSI, with the material able to maintain smectic phases up to r = [Li + ]/[EO] = 0.1. In this work, The highest ionic conductivity of 8 × 10 -3 S/cm was attained at an intermedium salt concentration of r = 0.05. It was also found that ion conduction in BTTT/dEO4 is enhanced by forming a smectic layered structure with irregular interfaces between the BTTT and EO4 layers and by the lateral film expansion upon salt addition. This can be explained by the enhancement of the misalignment and configurational entropy of the side chains, which increase their local mobility and that of the solvated ions. Our molecular design thus illustrates how, beyond the favorable energetic interactions that drive the assembly and ion solvating domains, modulation of entropic effects can also be favorably harnessed to improve ion conduction.

thin film electrochemical impedance spectroscopy↗
DOE OSTI2025

Electronic Structure Progression across the ACu 2 Q 2 (MQ 2 ) n Semiconductor Series

Moving beyond the engineering of known materials and elemental substitution within common structure types is critical for designing unique properties. Here, we present a new homologous series, ACu 2 Q 2 (MQ 2 ) n (A = Sr, Ba, 2Na; MQ 2 = ZrS2, HfSe 2 ), establishing 11 new members. In β-BaCu 2 Q 2 and Na 2 Cu 2 Se 2 (n = 0), the [Cu 2 Q 2 ] 2– motifs extend in two dimensions, whereas those in α-BaCu 2 Q 2 extend in three dimensions. Hence, there are two structural evolutions within the ACu 2 Q 2 (MQ 2 )n family driven by the polymorphism of the host structures. MQ 2 (n → ∞) displays 2D layers of edge-sharing [MQ 6 ] 8– octahedra that are 1-octahedron-thick and connected via van der Waals bonding. Each insertion of MQ 2 into ACu 2 Q 2 incorporates [MQ 6 ] 8– octahedra extending infinitely in one direction, confined to being 1-octahedron-thick in the second direction, with n controlling the number of [MQ 6 ] 8– octahedra in the third direction. Therefore, increasing n predictively expands the [Cu 2 MnQ 2n+2 ] 2– network in the direction controlled by n and relative to the A + /A 2+ ions. We demonstrate that for a given set of elements, one can enforce a “Host(Insertion)n” formula to systematically evolve both crystal and electronic structures from the host (n = 0) to the insertion (n → ∞) materials through intermediate values of n. Specifically, the energetic misalignment of the electronic band extrema of the parents predictively determines the band extrema and the resulting band gaps of all intermediate n members.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

River Delta Morphotypes Emerge From Multiscale Characterization of Shorelines

Abstract Delta shoreline structure has long been hypothesized to encode information on the relative influence of fluvial, wave, and tidal processes on delta formation and evolution. We introduce here a novel multiscale characterization of shorelines by defining three process‐informed morphological metrics. We show that this characterization yields self‐emerging classes of morphologically similar deltas, that is, delta morphotypes, and also predicts the dominant forcing of each morphotype. Then we show that the dominant forcings inferred from shoreline structure generally align with those estimated via relative sediment fluxes, while positing that misalignments arise from spatiotemporal heterogeneity in deltaic sediment fluxes not captured in their estimates. The proposed framework for shoreline characterization advances our quantitative understanding of how shoreline features reflect delta forcings, and may aid in deciphering paleoclimate from images of ancient deposits and projecting delta morphologic response to changes in sediment fluxes.

Vulis, L.↗
DOE OSTI2025

Fault Network Geometry Modulates Earthquake Source Spectra Across Scales

Earthquake source spectra provide unique insights into the earthquake rupture process. Motivated by previous research suggesting that complex fault geometries enhance high‐frequency seismic radiation, we study the influence of fault network geometry on earthquake source spectra using multiple independent observations. At regional scales, we examine correlations of stress drop measurements with surface fault trace misalignment in Southern California, Japan, and Central Italy. At a global scale, we examine correlations of moment‐rate function complexity of large earthquakes with focal mechanism variability, a proxy for local fault complexity. Despite significant scatter in the observations, we find overall consistent positive correlations. The concept that elastic interactions of discrete fault structures during the earthquake rupture process generates high‐frequency ground motions offers a coherent framework for interpreting our observations. These findings suggest that variations in fault complexity explain why some earthquakes produce stronger high‐frequency ground motions than others.

Lee, Jaeseok [Brown Univ., Providence, RI (United ↗
DOE OSTI2026

Early Solar Wind and Dynamo Magnetic Field Topology Predictions for (16) Psyche and Other Asteroids

Abstract Asteroid (16) Psyche is a metal‐rich body that might record an ancient coherent magnetization if some relict crust or mantle is preserved. Herein, we use magnetohydrodynamic simulations to predict (16) Psyche's field topology for several distinct pathways: (i) an early solar wind‐induced magnetization imparted after a larger body was impacted, forming the present‐day asteroid, (ii) a core dynamo magnetization imparted in an asteroid that is either presently largely intact or was a rubble pile, and (iii) magnetization in the turbulent solar nebula disk. For pathway (i) we find the field to be predominantly dipolar and spin axis‐aligned. For pathway (ii) we find the field to be either dipolar and spin axis‐misaligned, or highly multipolar. We also find that (iii) a field produced earlier before the solar nebula cleared, would be highly multipolar. In cases (i) and (ii) we also place constraints on the field strength. Simple detection of a magnetic field without constraining its topology and temporal variability would be insufficient to confirm a remanent source, due to the influence of the present‐day solar wind, electromagnetic induction, and (16) Psyche's high obliquity. For sufficiently strong fields however, the field topology and orientation may reveal key observable consequences of the nature and history of (16) Psyche. Our framework is also broadly applicable to the study of magnetic fields from other asteroids.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Interplay of water and a supramolecular capsule for catalysis of reductive elimination reaction from gold

Abstract Supramolecular assemblies have gained tremendous attention due to their ability to catalyze reactions with the efficiencies of natural enzymes. Using ab initio molecular dynamics, we identify the origin of the catalysis by the supramolecular capsule Ga 4 L 6 12− on the reductive elimination reaction from gold complexes and assess their similarity to natural enzymes. By comparing the free energies of the reactants and transition states for the catalyzed and uncatalyzed reactions, we determine that an encapsulated water molecule generates electric fields that contributes the most to the reduction in the activation free energy. Although this is unlike the biomimetic scenario of catalysis through direct host-guest interactions, the electric fields from the nanocage also supports the transition state to complete the reductive elimination reaction with greater catalytic efficiency. However it is also shown that the nanocage poorly organizes the interfacial water, which in turn creates electric fields that misalign with the breaking bonds of the substrate, thus identifying new opportunities for catalytic design improvements in nanocage assemblies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Phenological shifts in lake stratification under climate change

One of the most important physical characteristics driving lifecycle events in lakes is stratification. Already subtle variations in the timing of stratification onset and break-up (phenology) are known to have major ecological effects, mainly by determining the availability of light, nutrients, carbon and oxygen to organisms. Despite its ecological importance, historic and future global changes in stratification phenology are unknown. Here, we used a lake-climate model ensemble and long-term observational data, to investigate changes in lake stratification phenology across the Northern Hemisphere from 1901 to 2099. Under the high-greenhouse-gas-emission scenario, stratification will begin 22.0 ± 7.0 days earlier and end 11.3 ± 4.7 days later by the end of this century. It is very likely that this 33.3 ± 11.7 day prolongation in stratification will accelerate lake deoxygenation with subsequent effects on nutrient mineralization and phosphorus release from lake sediments. Further misalignment of lifecycle events, with possible irreversible changes for lake ecosystems, is also likely.

54 ENVIRONMENTAL SCIENCES↗