Numerical methods for ground simulation of satellite motion
Environmental models applicable for purposes of mission analysis were developed, documented, and recommended. The findings are described.
Bettis, D. G.↗
SEARCH · Search NASA
Results for “motion simulation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Air parcel motions during a simulated sudden stratospheric warming
Explore the source record for details and available documents.
Hsu, C. P. F.↗
The effects of simulator and aircraft motion on eye scan behavior
In a series of three experiments on the effects on eye-scan behavior of both simuator and aircraft motion, the sensitivity of an oculometric measure to motion effects was demonstrated. 'Fixation time', defined as the time the eyes spend at a particular location before moving on (saccade) to another fixation point, was found to be sensitive to motion effects in each of the experiments conducted. The results of the present study support the hypothesis that motion serves an alerting function, providing a 'cue' or 'clue' to the pilot that 'something happened'. The results do not support the hypothesis that direction of motion is conveyed through the type of motion information employed in these experiments.
Comstock, J. R., Jr.↗
Pattern formation by particles settling in viscous flows
Results are reported of several simulations of the motions of small objects in two-dimensional cellular flows performed to study the evolution of the distributions of particle flows over time in processes such as sedimentation. Stream functions are defined in the form of a Hamiltonian system for the particle motions, with inertial and particle acceleration being neglected. Conditions are found for which the particles will become trapped in an oscillatory motion or the particle orbits attain an oscillary motion. Various simulation images are provided to illustrate the usefulness of the technique for modeling fractal swarms.
Smith, L. A.↗
Design of optimal motion for flight simulators
Explore the source record for details and available documents.
Ish-Shalom, J.↗
A study of the characteristics of human-pilot control response to simulated aircraft lateral motions
Explore the source record for details and available documents.
Cheatham, Donald C↗
Lateral Stability Characteristics Between Mach Numbers of 0.80 and 1.57 and Simulation of Coupled Motion at Mach Number of 1.30 of a Rocket-propelled Model of an Airplane Configuration Having Thin Highly Tapered 45 Degree Sweptback Surfaces
Explore the source record for details and available documents.
D'Aiutolo, Charles T↗
Large-Scale Numerical Simulations of Human Motion
This paper examines the feasibility of using massively-parallel and vector-processing supercomputers to solve large-scale optimal control problems for human movement. Specifically, we compare the computational expense of determining the optimal controls for the single support phase of walking using a conventional serial machine (a Silicon Graphics Personal Iris 4D25 workstation), a MIMD parallel machine (an Intel iPSC/860 comprising 128 processors), and a parallel-vector-processing machine (a Cray Y-MP 8/864). With the human body modeled as a 14 degree-of-freedom linkage actuated by 46 musculotendinous units, computation of the optimal controls for walking could take up to 3 months of CPU time on the Iris. Both the Cray Y-MP and the Intel iPSC/860 are able to reduce this time to practical levels. The optimal control solution for walking can be found with about 77 hours of CPU time on the Cray, and with about 88 hours of CPU time on the Intel. Although the overall speeds of the Cray and the Intel were found to be similar, the unique capabilities of each machine are best suited to different parts of the optimal control algorithm used. The Intel performed best in the calculation of the derivatives of the performance criterion and the constraints. In contrast, the Cray performed best during parameter optimization of the controls. These results suggest that the ideal computer architecture for solving very large-scale optimal control problems is a hybrid system in which a vector-processing machine is integrated into the communication network of a MIMD parallel machine.
Anderson, Frank C.↗
Pilot Evaluation of Adaptive Control in Motion-Based Flight Simulator
The objective of this work is to assess the strengths, weaknesses, and robustness characteristics of several MRAC (Model-Reference Adaptive Control) based adaptive control technologies garnering interest from the community as a whole. To facilitate this, a control study using piloted and unpiloted simulations to evaluate sensitivities and handling qualities was conducted. The adaptive control technologies under consideration were ALR (Adaptive Loop Recovery), BLS (Bounded Linear Stability), Hybrid Adaptive Control, L1, OCM (Optimal Control Modification), PMRAC (Predictor-based MRAC), and traditional MRAC
Kaneshige, John T.↗
Motion of a spacecraft with magnetic damper
Three methods of numerically simulating the motion of a spacecraft with a magnetic damper are compared. Simulations of motion of the initial assembly stage of Space Station Freedom show that results obtained with the first approach are in general agreement with those based on the second approach, while results from the third method are incorrect unless the spacecraft is nearly at rest in a local-vertical-local-horizontal reference frame. Simulations based on the second method proceed much more quickly than simulations based on the first. An integral of equations of motion governing the behavior of a spacecraft, and a sphere, which is part of the damper is presented. The integral can be used to test the results of numerical integrations performed in connection with the first and second approaches.
Roithmayr, Carlos M.↗
A demonstration of motion base design alternatives for the National Advanced Driving Simulator
A demonstration of the capability of NASA's Vertical Motion Simulator to simulate two alternative motion base designs for the National Advanced Driving simulator (NADS) is reported. The VMS is located at ARC. The motion base conditions used in this demonstration were as follows: (1) a large translational motion base; and (2) a motion base design with limited translational capability. The latter had translational capability representative of a typical synergistic motion platform. These alternatives were selected to test the prediction that large amplitude translational motion would result in a lower incidence or severity of simulator induced sickness (SIS) than would a limited translational motion base. A total of 10 drivers performed two tasks, slaloms and quick-stops, using each of the motion bases. Physiological, objective, and subjective measures were collected. No reliable differences in SIS between the motion base conditions was found in this demonstration. However, in light of the cost considerations and engineering challenges associated with implementing a large translation motion base, performance of a formal study is recommended.
Mccauley, Michael E.↗
Simulation of Physics-Based 0-10Hz Strong Motion Using High Performance Computing Supporting Refinements to Regional Ground Motion Models for the Central Eastern US
In collaboration with the U.S. Nuclear Regulatory Commission (NRC) the LLNL has developed a computationally efficient simulation platform designed to perform physics-based ground motion simulations for crustal earthquakes in the Stable Continental Regions of Central and Eastern US (CEUS), using high-performance computing. The main objective of the earthquake simulations was to use synthetic ground motion to provide constrains to refinements of existing ergodic Ground Motion Models (GMMs), for large magnitude earthquakes and near-fault distances, for which these models are less reliable. Physics-based broadband (0-10Hz) ground motion simulations were used to estimate the near-fault ground motion amplitudes and within event and between-event variabilities associated with fault rupture characteristics. In our simulations we used a 3D regional velocity model that was based on Saikia’s 1D velocity model (1994). In simulations performed during the first stage of this project the Saikia’s velocity model demonstrated better performance in modelling high frequency regional wave propagation for the CEUS region recorded during the Mw5.0 November 7, 2016, Cushing Oklahoma (Taylor et al., 2017), and Mw5.8 September 3, 2016, Pawnee Oklahoma earthquakes. The proposed regional 3D model includes random perturbations to the 1D background model using the stochastic scheme of Pitarka and Mellors (2021). In addition, validation analysis of the rupture generator and regional wave propagation models, using comparisons with different GMMs for Mw6.5 and Mw7.0 scenario earthquakes in the CEUS region resulted in a very good match between the simulated and empirical ground motion models. For the purposes of seismic hazard assessment at the existing and planned nuclear power plants, NRC is interested in studies aimed at improving the current ground motion models (GMM) for both Stable Continental Regions (SCR) in the Central and Eastern US and Active Crustal Regions (ACR) in the Western US. Due to lack of recorded data, these improvements require synthetic data for short fault distances and large magnitude earthquakes for which the existing recorded data is not enough to uniquely constrain the GMMs. The need for simulations and strong motion data is especially critical for the CEUS region where we do not have recorded data from potentially large damaging earthquakes with moment magnitudes 6.0 and higher. In this the project, we focused on 10Hz simulations of Mw7.0 scenario earthquakes with strike slip and thrust faulting mechanisms. We used more than 50 Mw7.0 earthquake rupture scenarios to investigate the ground motion uncertainty due to unknown earthquake rupture parameters, in particular, the slip distribution, rupture velocity, and faulting mechanism, and their implication on ground motion amplification due to forward rupture directivity effects.
22 GENERAL STUDIES OF NUCLEAR REACTORS↗
A direct application of the non-linear inverse transformation flight control system design on a STOVL aircraft
The nonlinear inverse transformation flight control system design method is applied to the Lockheed Ft. Worth Company's E-7D short takeoff and vertical land (STOVL) supersonic fighter/attack aircraft design with a modified General Electric F110 engine which has augmented propulsive lift capability. The system is fully augmented to provide flight path control and velocity control, and rate command attitude hold for angular axes during the transition and hover operations. In cruise mode, the flight control system is configured to provide direct thrust command, rate command attitude hold for pitch and roll axes, and sideslip command with turn coordination. A control selector based on the nonlinear inverse transformation method is designed specifically to be compatible with the propulsion system's physical configuration which has a two dimensional convergent-divergent aft nozzle, a vectorable ventral nozzle, and a thrust augmented ejector. The nonlinear inverse transformation is used to determine the propulsive forces and nozzle deflections, which in combination with the aerodynamic forces and moments (including propulsive induced contributions), and gravitational force, are required to achieve the longitudinal and vertical acceleration commands. The longitudinal control axes are fully decoupled within the propulsion system's performance envelope. A piloted motion-base flight simulation was conducted on the Vertical Motion Simulator (VMS) at NASA Ames Research Center to examine the handling qualities of this design. Based on results of the simulation, refinements to the control system have been made and will also be covered in the report.
Chung, W. W.↗
Exposure to a Rotating Virtual Environment During Treadmill Locomotion Causes Adaptation in Heading Direction
The goal of the present study was to investigate the adaptive effects of variation in the direction of optic flow, experienced during linear treadmill walking, on modifying locomotor trajectory. Subjects (n = 30) walked on a motorized linear treadmill at 4.0 kilometers per hour for 24 minutes while viewing the interior of a 3D virtual scene projected onto a screen 1.5 in in front of them. The virtual scene depicted constant self-motion equivalent to either 1) walking around the perimeter of a room to one s left (Rotating Room group) 2) walking down the center of a hallway (Infinite Hallway group). The scene was static for the first 4 minutes, and then constant rate self-motion was simulated for the remaining 20 minutes. Before and after the treadmill locomotion adaptation period, subjects performed five stepping trials where in each trial they marched in place to the beat of a metronome at 90 steps/min while blindfolded in a quiet room. The subject's final heading direction (deg), final X (for-aft, cm) and final Y (medio-lateral, cm) positions were measured for each trial. During the treadmill locomotion adaptation period subject's 3D torso position was measured. We found that subjects in the Rotating Room group as compared to the Infinite Hallway group: 1) showed significantly greater deviation during post exposure testing in the heading direction and Y position opposite to the direction of optic flow experienced during treadmill walking 2) showed a significant monotonically increasing torso yaw angular rotation bias in the direction of optic flow during the treadmill adaptation exposure period. Subjects in both groups showed greater forward translation (in the +X direction) during the post treadmill stepping task that differed significantly from their pre exposure performance. Subjects in both groups reported no perceptual deviation in position during the stepping tasks. We infer that viewing simulated rotary self-motion during treadmill locomotion causes adaptive modification of sensory-motor integration in the control of position and trajectory during locomotion which functionally reflects adaptive changes in the integration of visual, vestibular, and proprioceptive cues. Such an adaptation in the control of position and heading direction during locomotion due to the congruence of sensory information demonstrates the potential for adaptive transfer between sensorimotor systems and suggests a common neural site for the processing and self-motion perception and concurrent adaptation in motor output. This will result in lack of subjects perception of deviation of position and trajectory during the post treadmill step test while blind folded.
Ruttley, T↗
Exposure to a Rotating Virtual Environment During Treadmill Locomotion Causes Adaptation in Heading Direction
The goal of the present study was to investigate the adaptive effects of variation in the direction of optic flow, experienced during linear treadmill walking, on modifying locomotor trajectory. Subjects (n = 30) walked on a motorized linear treadmill at 4.0 km/h for 24 minutes while viewing the interior of a 3D virtual scene projected onto a screen 1.5 m in front of them. The virtual scene depicted constant self-motion equivalent to either 1) walking around the perimeter of a room to one s left (Rotating Room group) 2) walking down the center of a hallway (Infinite Hallway group). The scene was static for the first 4 minutes, and then constant rate self-motion was simulated for the remaining 20 minutes. Before and after the treadmill locomotion adaptation period, subjects performed five stepping trials where in each trial they marched in place to the beat of a metronome at 90 steps/min while blindfolded in a quiet room. The subject s final heading direction (deg), final X (for-aft, cm) and final Y (medio-lateral, cm) positions were measured for each trial. During the treadmill locomotion adaptation period subject s 3D torso position was measured. We found that subjects in the Rotating Room group as compared to the Infinite Hallway group: 1) showed significantly greater deviation during post exposure testing in the heading direction and Y position opposite to the direction of optic flow experienced during treadmill walking 2) showed a significant monotonically increasing torso yaw angular rotation bias in the direction of optic flow during the treadmill adaptation exposure period. Subjects in both groups showed greater forward translation (in the +X direction) during the post treadmill stepping task that differed significantly from their pre exposure performance. Subjects in both groups reported no perceptual deviation in position during the stepping tasks. We infer that 3 viewing simulated rotary self-motion during treadmill locomotion causes adaptive modification of sensory-motor integration in the control of position and trajectory during locomotion which functionally reflects adaptive changes in the integration of visual, vestibular, and proprioceptive cues. Such an adaptation in the control of position and heading direction during locomotion due to the congruence of sensory information demonstrates the potential for adaptive transfer between sensorimotor systems and suggests a common neural site for the processing and self-motion perception and concurrent adaptation in motor output. This will result in lack of subjects perception of deviation of position and trajectory during the post treadmill step test while blind folded.
Mulavara, A. P.↗
Vertical motion requirements for landing simulation
Tests were conducted to determine the significance of vertical acceleration cues in the simulation of the visual approach and landing maneuver. Landing performance measures were obtained for four subject pilots operating a visual landing simulation device which provides up to plus or minus 40 feet of vertical motion. Test results indicate that vertical motion cues are utilized in the landing task, and that they are particularly important in the simulation of aircraft with marginal longitudinal handling qualities. To assure vertical motion cues of the desired fidelity in the landing tasks, it appears that a simulator must have excursion capabilities of at least plus or minus 20 feet.
Bray, R. S.↗
Linear Mixed-Effects Models for Human-in-the-Loop Tracking Experiment Data
Linear mixed-effects models provide several benefits over more traditional statistical inference tests that are particularly useful for most human-in-the-loop tracking experiment data. However, surprisingly, mixed models are virtually not used for the analysis of tracking experiment data. This paper uses of linear mixed-effects models to analyze combined tracking data from two previous human-in-the-loop roll tracking experiments that compared control behavior metrics collected in both a research aircraft and a motion-base simulator. In the experiments, pilots' behavior under 10 different motion configurations with varying motion filter gains and break frequencies was evaluated and compared to that in the real aircraft. The linear mixed-effects model analysis on the combined dataset confirmed the main statistical outcomes of the individual experiments. The main benefits of mixed models for this type of data were demonstrated by successfully combining data from two experiments that used different experimental conditions and of which one had an additional apparatus and the other a missing participant. Finally, the mixed-model analysis was able to explicitly test for scientifically relevant statistical differences in the dependent measures between the aircraft and simulator, as well as both experiments.
manual control↗