Search NASA⌕ Search

SEARCH · Search NASA

Results for “multispectral”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Design tradeoffs for a Multispectral Linear Array (MLA) instrument

The heart of the multispectral linear array (MLA) design problem is to develop an instrument concept which concurrently provides a wide field-of-view with high resolution, spectral separation with precise band-to band registration, and excellent radiometric accuracy. Often, these requirements have conflicting design implications which can only be resolved by careful tradeoffs that consider performance, cost, fabrication feasibility and development risk. The key design tradeoffs for an MLA instrument are addressed, and elements of a baseline instrument concept are presented.

Mika, A. M.↗

Multispectral Linear Array (MLA) science and technology program

A Goddard Space Flight Center program of science studies and technology development to provide the basis for future earth observation sensors employing multispectral linear array (MLA) technology is described. Establishment of MLA performance parameters and performance modeling make up the primary science activities. Critical technologies being developed include: short-wave infrared (SWIR) detector arrays, visible/and near infrared detector arrays, and passive cryogenic coolers. Supporting activities include: test and field instrument development, focal plane research and assessment laboratory, system simulation laboratory, calibration sources and techniques, optics, and thermal infrared arrays.

Barnes, W. L.↗

Airborne multispectral linear array instruments at Goddard Space Flight Center

The fabrication of airborne instruments is contributing to the development of multispectral linear array technology at NASA's Goddard Space Flight Center. The linear array pushbroom radiometer (LAPR-I), was built to demonstrate capabilities for acquiring digital image data using linear arrays. The LAPR-I employed three arrays of 512 silicon photodiodes each to simultaneously acquire three channels of data for spectral bands within the visible and near-infrared portions of the spectrum. A second instrument, LAPR-II, uses four arrays each consisting of 512 silicon detectors. A filter wheel containing six spectral filters is used in conjunction with each array to allow filter changes in flight. This capability will facilitate studies into the utility of various bands within the visible and near infrared portions of the spectrum. The LAPR-II's aircraft mounting will allow off-nadir pointing (plus-or-minus 50 deg fore-and-aft and side-to-side) which will enable investigations of the radiometric and geometric effects of off-nadir viewing. A short wave infrared radiometer is also described.

Irons, J. R.↗

Multispectral scanner, thematic mapper, and beyond

The capabilities and functions of the Landsat D multispectral scanner (MSS) and thematic mapper (TM) are explored as a basis for improvements to satisfy increasing user demands. The MSS is an object-space line scanner for gathering data in four spectral bands ranging from 0.5-1.1 micron. In a 705 km near-polar sunsynchronous orbit, the MSS will generate 185 x 185 km imagery with 80 x 80 m ground resolution, mapping the entire earth every 16 days. Photomultiplier tubes are used for four of the bands and the other employs Si photodiodes. A calibration light source provides in orbit calibration during every reverse scan period of a pivotal on-board mirror. The TM collects data in seven bands from 0.45-12.5 microns, yielding a ground resolution of 30 x 30 m in six bands for reflected sunlight and 120 x 120 m for the 10.4-12.5 thermal bands. The addition of 16 Si detectors for 0.9-1.1 micron viewing for agricultural purposes, as well as higher resolution, is discussed.

Jones, C. R.↗

Contextual classification of multispectral image data

A general method is presented for exploiting both spatial and spectral information when classifying multispectral image data. This statistical classification algorithm utilizes the tendency of certain ground cover classes to be more likely to occur in some contexts than others. The theoretical model assumes the two-dimensional array of random observations and a 0-1 loss function, a distribution of the p-context array that is spatially invariant, and class-conditional independence for the observations. The problems that prevent the immediate use of this context classifier are the need for a generally applicable method for making adequate estimates of the context distribution and a reduction in the computational intensivity of the classifier. The former problem is being approached by a method that raises the relative frequency value for each class configuration to a power and uses the result as the context distribution estimate. The second is being approached by searching for a less computationally intensive algorithm.

Tilton, J. C.↗

Mineral identification from orbit - Initial results from the Shuttle multispectral infrared radiometer

The Shuttle multispectral IR radiometer (SMIRR) was designed to obtain surface reflectance data in ten spectral bands in order to evaluate the usefulness of a future imaging system for remote mineral identification. Attention was given to the 2.0-2.4 micron region, which has a wealth of spectral absorption features and appeared to have potential for the identification of CO3- and OH-bearing minerals such as the kaolinite and montmorillonite clays. SMIRR radiances were normalized by using a spectrum for dune sand collected in the Kharga Depression in Egypt. Direct identifications have been made of kaolinite-containing and carbonate material, indicating an exceptional potential for future orbital platform narrowband spectral imaging systems for mineralogical mapping.

Goetz, A. F. H.↗

Multispectral radiation detection of small changes in target emissivity

An investigation into the multispectral radiation detection of small changes in target emissivity has been performed by Georgia Tech. A series of ice detection measurements on the shuttle external tank (ET) were performed using an advanced instrumentation radiometer operating at 35/95 GHz. Actual shuttle ET ice detection measurements were run at NASA's National Space Technology Laboratory (NSTL) during cryogenic fueling operations prior to orbiter engine firing tests. Investigations revealed that ET icing caused an increase in surface brightness temperature and the test results further demonstrated the usefulness of millimeter wave radiometry for the detection of ice on the ET.

Gagliano, J. A.↗

Use of Seasat synthetic aperture radar and Landsat multispectral scanner subsystem data for Alaskan glaciology studies

Three Seasat synthetic aperture radar (SAR) and three Landsat multispectral scanner subsystem (MSS) scenes of three areas of Alaska were analyzed for hydrological information. The areas were: the Dease Inlet in northern Alaska and its oriented or thaw lakes, the Ruth and Tokositna valley glaciers in south central Alaska, and the Malaspina piedmont glacier on Alaska's southern coast. Results for the first area showed that the location and identification of some older remnant lake basins were more easily determined in the registered data using an MSS/SAR overlay than in either SAR or MSS data alone. Separately, both SAR and MSS data were useful for determination of surging glaciers based on their distinctive medial moraines, and Landsat data were useful for locating the glacier firn zone. For the Malaspina Glacier scenes, the SAR data were useful for locating heavily crevassed ice beneath glacial debris, and Landsat provided data concerning the extent of the debris overlying the glacier.

Hall, D. K.↗

Laboratory system for demonstrating spacecraft processing of multispectral image data

The various elements of the Information Adaptive System (IAS) program are discussed along with the design features, approaches, and algorithms employed within the system. This program was initiated by NASA in order to develop an adaptable data processing system which will accommodate high speed multispectral image data in the real-time spacecraft environment. The development of this system is examined, including the test and support equipment required to evaluate and demonstrate the operational performance of the system in terms of the applicability of the design to high speed onboard processing. In addition to a high throughput rate capability, this system will be flexible, programmable, and capable of adapting its operation to external commands and characteristics of the data stream.

Meredith, B. D.↗

Preliminary analysis of Shuttle multispectral radiometer data for southern Egypt

The Shuttle Multispectral Infrared Radiometer (SMIRR) is a spectroradiometer covering the region from 0.5 to 2.5 microns in 10 channels that acquired data from spots 100 m in diameter along the subspacecraft ground track. It was flown aboard the second flight of the Space Shuttle Columbia, November 12-14, 1981. Data collected during orbit 16 over southern Egypt show that carbonate rocks, kaolinite, and possibly montmorillonite can be identified by their SMIRR spectral signatures and limited knowledge of the lithologic units present. Detailed analysis of SMIRR data for this area indicates that calcite, kaolinite, and montmorillonite rocks give rise to absorption features that result in characteristic 10 channel spectra.

Rowan, L. C.↗

Global multispectral mosaics of the icy Galilean satellites

Multispectral mosaics of the three icy Galilean satellites have been produced from low- to moderate-resolution Voyager images. The digital image data have been calibrated using preflight and in-flight calibration data, and reduced to normal albedos for four-color band passes, centered at 0.35, 0.41, 0.48, and 0.59 microns. The individual images have been geometrically corrected, mosaiked, and presented in a normal cylindrical map projection at a uniform scale of 8 km/pixel. Preliminary analysis of the normal albedo data shows that (1) the darkest terrains on the satellites are the dark regions on Callisto, (2) the brightest regions are bright plains regions on Europa and bright, fresh craters on Ganymede, (3) bright craters on Ganymede and its dark, cratered regions are both significantly brighter than comparable terrains on Callisto, and (4) Europa exhibits several distinct spectral units, with regions on the trailing hemisphere having lower relative ultraviolet spectral reflectance than areas on the leading hemisphere. This is consistent with proposals that Io-related plasma impact on Europa's trailing side has altered its optical properties.

Johnson, T. V.↗

The time-space relationships among data points from multispectral spatial scanners

Multispectral scanner and thematic mapper (TM) data from Landsat satellites are discussed in terms of the perceived 'simultaineity' of the images, which are obtained by scanning techniques. Scanning the scenes ensures that the data points of the images are actually sequential, even if the scan is performed at rates that are fast relative to the motion of the spacecraft. The last datum gathered by the MSS is, in fact, taken 29 sec after the first, witih a 56 m distance being present between pixels. The spacing in uneven from band to band on the TM and analyses of the data to produce an image requires consideration of nonfixed time relationships for different locations on the scan within and among the bands. Additionally, corrective measures must be taken to compensate for instrument jitter and attitude changes.

Gordon, F.↗

Shuttle Multispectral Infrared Radiometer - Preliminary results from the second flight of Columbia

The Shuttle Multispectral Infrared Radiometer (SMIRR) is a spectroradiometer covering the region 0.5-2.5 microns in 10 channels that acquired data from 100 m diameter spots along the subspacecraft ground track. It was flown aboard the second flight of the Space Shuttle Columbia, November 12-14, 1981. Preliminary analysis of data from one of the 17 orbits covered shows that in Egypt, carbonate rocks, kaolinite, and possibly montmorillonite can be identified by their SMIRR spectral signatures in conjunction with limited knowledge of the regional geologic setting. The SMIRR data have made possible the first remote identification of carbonate rocks and clays from orbit.

Goetz, A. F. H.↗

Mineralogic information from a new airborne thermal infrared multispectral scanner

The thermal IR multispectral scanner (TIMS) has been developed for airborne geologic surveys. The resststrahlen band between 8-11 microns is exhibited by interatomic stretching vibrations of Si and oxygen bound up in the crystal lattice of silicate rocks. The crystal structure of the component minerals influence the depth and position of the detected band. The TIMS has six channels, an 80 deg field of view, and a sensitivity sufficient to detect a noise equivalent change in spectral emissivity of 0.002-0.006. The six bands measured are 8.2-8.6, 8.6-9.0, 9.4-10.2, 10.2-11.2, and 11.2-12.2 microns, using HgCdTe detectors. The data are analyzed with respect to emissivity variations as a function of wavelength, using the component transformation technique called a decorrelation stretch, with spectral differences being displayed as different colors. Sample scenes from Death Valley and the Nevada Cuprite mining district are compared with visible and near-IR color composites of the same areas, revealing the superior distinctions that are available with the TIMS.

Kahle, A. B.↗

Investigation of radiometric properties of the LANDSAT-4 multispectral scanner

The radiometric data quality of the LANDSAT 4 multispectral scanner (MSS) was examined using several LANDSAT 4 frames. It was found that LANDSAT 4 MSS produces high-quality data of the caliber experienced with previous LANDSATS. For example, the detector equalization procedure worked well, leaving a residual banding effect of about 0.3 digital counts RMS, close to the theoretical minimum value of quantization error. Nevertheless, artifacts of the data were found, two of which were not experienced in previous MSS data. A low-level coherent noise effect was observed in all bands, with a magnitude of about 0.5 digital counts and a frequency of approximately 28 KHz (representing a wavelength of about 3.6 pixels); a substantial increase in processing complexity would be required to reduce this artifact in the data. Also, a substantial scan-length variation (of up to six pixels) was noted in MSS data when the TM sensor was operating; the LANDSAT 4 correction algorithms being applied routinely by the EROS Data Center to produce a p-type data should remove most of this variation. Between-satellite calibrations were examined in paired LANDSAT 3 and LANDSAT 4 MSS data sets, which were closely matched in acquisition time and place. Radiometric comparisons showed that all bands were highly linear in digital counts, and a well-determined linear transformation between the MSS's was established.

Malila, W. A.↗

Comparison of the information content of data from the LANDSAT-4 Thematic Mapper and the Multispectral Scanner

Simultaneous data acquisition by the LANDSAT-4 Thematic Mapper (TM) and the multispectral scanner (MSS) permits the comparison of the two types of image data with respect to engineering performance and data applications. The information contained in five matching scenes in agricultural areas is evaluated for the visible and near-IR channels, leading to the conclusion that the TM provides a significant advance in information gathering capability as expressed in terms of either bits per pixel or bits per unit area.

Price, J. C.↗