Search NASA⌕ Search

SEARCH · Search NASA

Results for “nanotechnologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Sensitized Near-Infrared Emission of SiGe Nanocrystals via Heterostructuring with Quasi Two-Dimensional Perovskite

The near-infrared (NIR) emission of silicon–germanium alloy nanocrystals (SiGe NCs) was sensitized by heterostructuring with a quasi two-dimensional (Q-2D) perovskite (CsPbBr 3 blended with butylammonium bromide (BABr)). Colloidal SiGe NCs were synthesized by using a nonthermal plasma method with chloride precursors. As-synthesized SiGe NCs showed no detectable photoluminescence (PL). Embedding the SiGe NCs within the perovskite matrix via spin coating led to a heterostructure exhibiting dual emissions: green emission at 520 nm from the perovskite and NIR emission at 1035 nm from the SiGe NCs. Time-integrated and resolved PL measurements and transient absorption spectroscopy revealed energy transfer from the perovskite to the SiGe NCs, which sensitized the NIR emission from the SiGe NCs and quenched the green PL for the perovskite. These results demonstrate that Ge alloying can effectively tune the bandgap of Si NCs and highlight the feasibility of heterostructuring perovskites and photoluminescent NCs to enhance or activate their PL. In conclusion, this approach broadens their potential applications in the NIR region.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Multimodal characterization of Te inclusions in Cd 1−x Zn x Te and Cd 1−x Zn x Te 1−y Se y for gamma and X-ray detectors

While CdZnTe (CZT) and CdZnTeSe (CZTS) semiconductors have emerged as compounds for room-temperature gamma and X-ray detection materials, they continue to be constrained by the formation of Te-inclusion defects generated during the growth and post-growth phases of the material, which adversely affect the detector performance. We demonstrate the utility of multimodal microscopic imaging and analysis for the characterization of the optical and electronic properties of Te inclusions in CZT and CZTS crystals at both micron and nanometer length scales. Having first identified regions with micron-scale Te inclusions using confocal Raman microscopy techniques, optically coupled infrared scattering near-field optical microscopic mapping was performed to map the distribution of these inclusions with nanometer spatial resolution and correlate the presence of Te inclusions in the matrix with other properties. Kelvin probe force microscopy was then utilized to characterize the variations of the work function associated with the presence of Te inclusions. Here, we observe an increase of ~ 240 mV in the work function associated with Te inclusions compared to the bulk CZT/CZTS crystals. Additionally, we observe that individual bulk grains in CZT can exhibit slight potential variations. Our findings develop a portrait of the charge trapping mechanisms in CZT and CZTS that act to degrade detector performance, while the demonstration of these combined microscopy techniques provides a new analytical tool that can be utilized for further optimization of the detector performance for these semiconducting compounds.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Terahertz Chiral Metamaterials Enabling Broadband Polarization Conversion Using Polarization Guiding Effect

Polarization control plays a vital role in terahertz (THz) photonics, enabling a wide range of applications from imaging and spectroscopy to sensing and wireless communication. However, conventional polarization control methods at THz frequencies are limited by narrow operational bandwidths and excessive absorption losses. In this work, we present a broadband THz polarization control based on the polarization guiding effect. We design and fabricate a THz polarization rotator capable of rotating incident linear polarization by 90°. The device consists of 24 twistingly stacked silicon–air metagrating layers that introduce a large degree of form birefringence, with each metagrating layer being 280 µm thick and sequentially twisted by 3.75°. Numerical simulations using the Berreman 4 × 4 method predict broadband operation of the device. Experimental validation using THz time-domain spectroscopy confirms efficient and broadband 90° polarization rotation from 0.2 to 1.25 THz. Based on this concept, we further propose THz Q-plates for the generation of broadband structured vector beams with radial and azimuthal polarization states. This work offers a scalable, material-agnostic platform for advanced THz polarization manipulation and vector beam engineering, opening new pathways for next-generation THz photonic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

An Optothermal Raman Model Accounting for Convection, Radiation, and Substrate Effects for Evaluation of the Thermal Conductivity of Two‐Dimensional Coatings

Thermal conductivity of two‐dimensional (2D) materials is important to characterize as this will govern thermal transport physics in the various thermal and energy applications benefitting from the unique properties of these materials. Here, analytical and numerical techniques are presented to determine the thermal conductivity and interfacial conductance of a 2D material coating using confocal micro‐Raman spectroscopy as a noncontact diagnostic. While several methods have been proposed for calculating the values of thermal conductivity, interfacial conductance, and spatial temperature profile, these models often do not consider effects of radiation, convection, and substrate resistance on the temperature and heat flux profiles. We present a model to calculate the thermal conductivity and interfacial conductance which accounts for convection, radiation, and substrate effects to characterize a variety of 2D material coatings, which is demonstrated using large area graphene transferred onto copper and nickel substrates. Convection and radiation effects are found to have a negligible effect on the temperature profile of supported coatings, while the substrate effects have a considerable effect and therefore impact the quantification of thermal conductivity and interfacial conductance in addition to limiting the spatial resolution of the technique. These findings will allow for more accurate and reproducible extraction of the thermal conductivity of graphene and other 2D material coatings when employing noncontact optothermal Raman spectroscopy methods.

2D coatings↗
DOE OSTI2025

Nickel Enhances InPd-Catalyzed Nitrate Reduction Activity and N 2 Selectivity

Palladium–indium (PdIn) is a well-established bimetallic composition for reductively degrading nitrate anions, one of the most ubiquitous contaminants in the groundwater. However, the scarcity and the variable price of these rare-earth and platinum group critical metals may hinder their use for water treatment. Nickel (Ni), a nonprecious metal in the same element group as Pd, could partially replace and lower Pd usage if the resulting trimetallic composition is sufficiently catalytically active. Herein, we report the synthesis and nitrate reduction catalysis of activated carbon-supported “In-on-Pd-on-Ni” catalysts (InPdNi/AC). While bimetallic InPd/AC (0.05 wt % In, 1.3 wt % Pd) was expectedly active, trimetallic InPdNi/AC containing the same In amount, much less Pd (0.1 wt %), and 1 wt % Ni was >17 more active (k cat ≈ 20 vs 349 L min –1 g surface metal –1 ). X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations showed that Pd gained electron density from Ni, correlating to the increased nitrate reduction activity. Ammonium byproduct selectivity for InPdNi/AC (18% at 50% nitrate conversion) was lower compared to that of InPd/AC (48%), suggestive of the higher surface coverage of NO or its greater reactivity with NO 2 – , which led to more N 2 . Accounting for the catalyst precursor, manufacturing costs, and spent metal recovery, we calculated that Ni incorporation lowered the net catalyst cost significantly (from $\$$1028/kg to $\$$170/kg). The trimetallic composition lowered, by ∼26 times, the catalyst cost of a stirred tank reactor sized to the same treatment capacity as that for the bimetallic case. In conclusion, the results demonstrate that the partial replacement of the precious metal with an earth-abundant one leads to a higher efficiency and lower cost denitrification catalyst, via a material strategy that should be beneficial for other clean-water catalytic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Low-temperature access to active iron and iron/nickel nitrides as potential electrocatalysts for the oxygen evolution reaction

Low-temperature, scalable routes to transition metal nitride (TMN) nanoparticles are desirable for a wide range of applications, yet their synthesis typically requires high temperatures (>350 °C) and reactive gas environments (e.g., NH 3 or H 2 /N 2 ). Here, we report a colloidal synthesis of mono- and bimetallic TMN nanoparticles using preformed metal carbonyl clusters as precursors and urea or diethylenetriamine (DETA) as nitrogen sources. This strategy enables access to size-controlled, phase-pure ε-Fe 3 N x and Fe y Ni 3−y N nanoparticles at temperatures below 300 °C, without the need for flowing reactive gas atmospheres. By systematically varying nitrogen precursor, reaction temperature, and cluster identity, we achieve tunable nitrogen stoichiometry (x) and phase selectivity between N-rich and N-poor TMNs. Structural and magnetic characterization confirms clean decomposition of the precursors and phase formation consistent with controlled nitridation at the nanoscale. Preliminary electrochemical measurements in alkaline media demonstrate that these materials exhibit oxygen evolution reaction (OER) overpotentials comparable to RuO 2 , highlighting their viability for future electrocatalytic applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

Octave-spanning terahertz quarter-wave plates based on over-coupled Fabry–Pérot resonances in reflective metal–dielectric–metal metasurfaces

Compact devices for broadband polarization control in the terahertz (THz) regime remain challenging to realize due to the intrinsic phase dispersion associated with birefringent materials and resonant structures. Here, we demonstrate achromatic THz quarter-wave plates with near-unity efficiency and operating under a wide range of incidence angles, based on over-coupled metal–dielectric–metal reflective metasurfaces. The devices operate as single-port anisotropic Fabry–Pérot cavities, in which the phase dispersion of the over-coupled resonances is engineered to maintain an approximately constant relative phase delay between orthogonal field components over a broad frequency range. Four complementary metasurface designs operating at an incidence angle of 45° collectively cover the 0.25–3 THz frequency range accessible to a typical THz time-domain spectroscopy system. Each device exhibits an approximately octave-wide operational bandwidth, with axial ratios below 3 dB and polarization-conversion efficiencies exceeding 80% across most of the operating band. Systematic structural optimization suppresses coupling to diffraction and guided-wave modes, thereby further extending the usable bandwidth while preserving the required phase relationship between orthogonal polarizations. The demonstrated metasurfaces are compatible with wafer-scale fabrication processes, and experimental results show excellent agreement with simulations. These findings establish over-coupled reflective metasurfaces as a robust, scalable, and versatile platform for broadband THz polarization control.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Localized exciton emission from monolayer WS 2 nanoribbon at cryogenic temperature

Abstract We conducted low-temperature photoluminescence (PL) spectroscopy experiments on individual WS 2 and MoSe 2 nanoribbons prepared by gold-assisted exfoliation from the slanted surface of bulk crystals with a vicinal and stepwise pattern. The nanoribbons are predominantly monolayer and have widths varying from hundreds of nanometers down to tens of nanometers. Most MoSe 2 NRs display an emission profile similar to 2D excitons of MoSe 2 monolayers. In contrast, WS 2 nanoribbons are characterized with sharp emission peaks that can be attributed to the emission from localized excitons or trions. Moreover a broad low energy emission peak can be also observed from some of the WS 2 nanoribbons, which originates from bilayer regions. In this manuscript, we analyze spectral diffusion behavior along with pump power and temperature dependence of the localized exciton emission peaks, shedding light on potential of TMDC nanoribbons in sensing and opto-electronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Highly Anisotropic Quasi‐Direct Organic Metal Halide Hybrids: A Platform for Polarization‐Sensitive Optoelectronics

Low-dimensional organic–inorganic metal halide hybrids (OMHHs) exhibit remarkable optical properties and enhanced environmental stability. We investigate a 1D OMHH with formula C 4 N 2 H 14 PbBr 4 , consisting of Pb–Br chains separated by organic cations, which shows a large Stokes shift (0.83 eV) and broadband emission. Through first-principles calculations and polarized Raman spectroscopy, we characterize the material's vibrational properties and identify the specific phonon modes that drive exciton self-trapping. Our novel GW/Bethe-Salpeter equation force formalism reveals that low-frequency phonons (∼ 100 cm −1 , primarily involving Pb–Br motions) couple strongly with excitons, with a remarkably high Huang-Rhys factor of 137 ± 4, and gives a pathway for ultrafast structural analysis during the absorption process. This phonon-exciton coupling mechanism explains the material's broadband emission and provides a pathway for controlling optical properties through vibrations and for tuning vibrations through optical excitations. The material also exhibits highly anisotropic optical properties and electronic transport, with bands that are dispersive along the Pb–Br chains but nearly flat in perpendicular directions, resulting in direction-dependent electrical conductivity that is calculated to be an order of magnitude higher along the chain direction and consistent with measurements. These combined properties make this system an excellent platform for polarization-sensitive optoelectronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Imaging Photonic Resonances within an All‐Dielectric Metasurface via Photoelectron Emission Microscopy

Dielectric metasurfaces, through volume‐type photonic resonances, enable precise control of light‐matter interactions for applications including imaging, holography, and sensing. The application space of dielectric metasurfaces has extended from infrared to visible wavelengths by incorporating high refractive index materials, such as titanium dioxide (TiO 2 ). Understanding the fundamental and fabrication limits for these applications requires metrology with nanoscale resolution, sensitivity to electromagnetic fields within the meta‐atom volume, and far‐field excitation. In this work, photoelectron emission microscopy (PEEM) is used to image field distributions of photonic resonances in a TiO 2 metasurface excited with far‐field, visible‐wavelength illumination. The local volumetric field variations within the meta‐atoms are analyzed as a function of illumination angle and polarization by comparing photoelectron images to finite‐difference time‐domain simulations. This study determines the inelastic mean free path of very low‐energy (<1 eV) photoelectrons to be 35 ± 10 nm, which is comparable to the meta‐atom height thereby highlighting PEEM sensitivity to resonances within the volume. Additionally, the simulations reveal high sensitivity of PEEM images to an in‐plane component of the illumination k ‐vector. These results demonstrate that photoelectron imaging with subwavelength resolution offers unique advantages for examining light‐matter interactions in volume‐type (as opposed to surface) photonic modes within dielectric nanophotonic structures.

electron inelastic mean free path↗
DOE OSTI2026

Exploring the Photogenerated Charge Transfer Mechanism in Cu 2 O@MoS 2 Heterojunction Photocatalyst Using Transient Absorption Spectroscopy

Both heterojunction and core–shell photocatalysts have demonstrated promising performance in photocatalytic CO 2 conversions to fuels. However, fundamental knowledge of heterojunctions in core–shell structures is highly desired to facilitate the design of future photocatalysts. By combining advanced experimental characterizations and density functional theory (DFT) calculations, the role of the Cu 2 O@MoS 2 heterojunction in photocatalytic CO 2 conversions to fuels was investigated. We discovered that the charge dynamics and electron transfer properties of Cu2O@MoS 2 photocatalysts are altered by the heterojunction and Cu 2 O underlayer due to the electron transfer from Cu 2 O to MoS 2 and the change in CO 2 adsorption strength on the hybrid catalyst surface. Consequently, more electrons can travel to the surrounding liquid environment to be consumed by CO 2 reduction. This study provides experimental and theoretical investigations of the fundamental mechanisms of heterojunction core–shell photocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Control of Excitonic Energy Transfer in RGB Quantum Dot:Polymer Composites for Tunable White Emission

Tint-controlled white light is crucial for both illumination systems and display applications. Here, in this study, we demonstrate solution-processed quantum-dot light-emitting diodes (QD-LEDs) featuring a red–green–blue (RGB) QD–poly(methyl methacrylate) (PMMA) composite emissive layer (EML) for tunable white electroluminescence (EL). In this composite EML, PMMA functions as a dispersion matrix that modulates the interdot spacing (d), thereby controlling Förster resonance energy transfer (FRET) between QDs. By adjustment of the PMMA content, the balance of R, G, and B emissions is controlled, enabling systematic and continuous tuning of the EL color from greenish to reddish white at a fixed RGB ratio and constant driving bias. Time-resolved photoluminescence measurements confirm that the variation in the exciton lifetime with the PMMA fraction is the primary factor for tuning the EL color. Notably, nearly pure white EL with CIE coordinates close to (0.33, 0.33) is achieved using a diluted PMMA matrix without significant degradation of the electrical properties. Our results demonstrate d as an independent design parameter for decoupling color tuning from RGB composition and electrical operation, providing a versatile design framework for high-quality white- or tint-controlled QD-LEDs toward advanced solid-state lighting and display technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Roadmap for Photonics with 2D Materials

Triggered by advances in atomic-layer exfoliation and growth techniques, along with the identification of a wide range of extraordinary physical properties in self-standing films consisting of one or a few atomic layers, two-dimensional (2D) materials such as graphene, transition metal dichalcogenides (TMDs), and other van der Waals (vdW) crystals now constitute a broad research field expanding in multiple directions through the combination of layer stacking and twisting, nanofabrication, surface-science methods, and integration into nanostructured environments. Photonics encompasses a multidisciplinary subset of those directions, where 2D materials contribute remarkable nonlinearities, long-lived and ultraconfined polaritons, strong excitons, topological and chiral effects, susceptibility to external stimuli, accessibility, robustness, and a completely new range of photonic materials based on layer stacking, gating, and the formation of moiré patterns. These properties are being leveraged to develop applications in electro-optical modulation, light emission and detection, imaging and metasurfaces, integrated optics, sensing, and quantum physics across a broad spectral range extending from the far-infrared to the ultraviolet, as well as enabling hybridization with spin and momentum textures of electronic band structures and magnetic degrees of freedom. The rapid expansion of photonics with 2D materials as a dynamic research arena is yielding breakthroughs, which this Roadmap summarizes while identifying challenges and opportunities for future goals and how to meet them through a wide collection of topical sections prepared by leading practitioners.

2D materials↗
DOE OSTI2025

Steerable terahertz beams using surface waves on an active metasurface

The development of dynamic components for controlling wave fronts in the sub-terahertz region of the electromagnetic spectrum has emerged as a frontier research topic for many applications in sensing and communications. One approach which has attracted much attention involves the use of active metasurfaces, tiled arrays of sub-wavelength elements with properties that can be reconfigured via external actuation. In nearly all cases, these metasurfaces are employed as either transmissive or reflective elements, taking advantage of their strong and tunable interaction with free-space electromagnetic waves. These interactions can be significantly enhanced through the use of surface waves propagating parallel to the metasurface array, although very few studies have exploited this option. Here, we integrate a metasurface into the interior of a parallel-plate waveguide in a configuration explicitly designed to exploit this surface-wave geometry. We show that varying the electrical properties of the active metasurface changes the wave vector of the guided mode, and thereby alters the emission angle of radiation out-coupled through a leaky-wave slot aperture. These results, which are consistent with numerical simulations, represent a new approach to broadband beam steering suitable for the sub-terahertz spectral range.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Wide-field microwave magnetic field imaging with nitrogen-vacancy centers in diamond

Non-invasive imaging of microwave (MW) magnetic fields with microscale lateral resolution is pivotal for various applications, such as MW technologies and integrated circuit failure analysis. Diamond nitrogen-vacancy (NV) center magnetometry has emerged as an ideal tool, offering micrometer-scale resolution, millimeter-scale field of view, high sensitivity, and non-invasive imaging compatible with diverse samples. However, up until now, it has been predominantly used for imaging of static or low-frequency magnetic fields or, concerning MW field imaging, to directly characterize the same microwave device used to drive the NV spin transitions. In this work, we leverage an NV center ensemble in diamond for wide-field imaging of MW magnetic fields generated by a test device employing a differential measurement protocol. The microscope is equipped with a MW loop to induce Rabi oscillations between NV spin states, and the MW field from the device-under-test is measured through local deviations in the Rabi frequency. This differential protocol yields magnetic field maps of a 2.57 GHz MW field with a sensitivity of ∼9 μT Hz −1/2 for a total measurement duration of T=357 s, covering a 340 × 340 μm 2 field of view with a micrometer-scale spatial resolution and a device-under-test input power dynamic range of 30 dB. This work demonstrates a novel NV magnetometry protocol, based on differential Rabi frequency measurement, that extends NV wide-field imaging capabilities to imaging of weak MW magnetic fields that would be difficult to measure directly through standard NV Rabi magnetometry.

crystallographic defects↗
DOE OSTI2025

Robust multiresonant nonlocal metasurfaces by rational design

Abstract Dielectric metasurfaces supporting optical resonances have become a promising platform for quantum and nonlinear optics. However, resonant metasurfaces remain limited in their capacity to independently control the behavior of many distinct resonances despite efforts in computational optimization and inverse design. In this work, we overcome longstanding limitations by introducing a generalized rational design paradigm based on symmetry. Specifically, we use symmetry-broken metasurfaces with periodic “quadromer” lattices comprised of four nanostructures per unit cell to enable extensive control of multiple optical resonances. The rationally designed metasurfaces are readily fabricable, and we experimentally demonstrate metasurfaces that support up to four high Q-factor resonances with deliberately chosen free-space polarizations, spectral separations, and mode profiles. Our design paradigm may unlock new applications for multiresonant metasurfaces in quantum and nonlinear optics, optical sensing, and augmented reality displays.

77 NANOSCIENCE AND NANOTECHNOLOGY↗